installed magneto successfully.... no problem with any of the .nbf files or anything. no country code error, no memory full error....
upon completion of installation when i resetted the device it said
" DEVICE AUTHENTICATION "
Device Authentication Failure. Please Contact product manufacturer. For Reference, please provide your device ID
and then its giving my device ID....
WAT CAN BE DONE PLS ?
http://forum.xda-developers.com/viewtopic.php?t=19006&highlight=device+authentication
read this
morphosin said:
installed magneto successfully.... no problem with any of the .nbf files or anything. no country code error, no memory full error....
upon completion of installation when i resetted the device it said
" DEVICE AUTHENTICATION "
Device Authentication Failure. Please Contact product manufacturer. For Reference, please provide your device ID
and then its giving my device ID....
WAT CAN BE DONE PLS ?
Click to expand...
Click to collapse
you must patch the nbf before you upgrade!
MAGNETO UNDER MICROSCOPE
have found Additional screwups in MAGNETO -
1. """XBACKUP""" program isn’t working
2. Broadcomm BLUETOOTH stack doesn’t get installed.
other problems known exist aswell
Related
Hi everybody
I have a big problem:
when i lost the gsm signal the phone is power off and never recive incoming calls ... until i'll power on again.
Is there some settings in order to search the gsm signal always...?
...cause i can't control the xda every 5 minutes if have signal or not...
I have 4.21 radio and 4.00.11 rom
Thanks all
Denis
have you tried a hard reset? or even re-writtin the bios?
that worked for me
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
Sorry ... when can i get the radio 6.24.00 ???
can work for Italy ?
What do you mean with "re-writtin the bios" ... ? the SD card boot ?
Thanks
I tried to upgrade my Device but When i install new update after two next Give me Error message said " Error 120:country id error" 5-5-N-8-N
and turn off my device and show only on to screen serial and on bottom Ver 1.06
PLS Help me
Country code errors =>
http://forum.xda-developers.com/viewtopic.php?t=12101&start=0
unfortenately you are now in a position that you can't see what your device was.
Do you remember what OS was on your device? Which update did you try?
Hi there,
Although a frequent reader, this i my first post and I NEED YOUR HELP.
Total loser that i am i accidently run the HimaClearJumpCode.exe on my himalaya instead of the HimaGetDeviceData.exe. And as you stated in another topic: (Warning: DO NOT under any circumstances copy and run HimaClearJumpCode.exe on your device as it will render it unbootable. It is used by the upgrade utility to put you device into bootloader mode prior to upgrading.)
I am now properly F*CKED, please help!!!!!!!!! (if there is a way out of this...) Please also note i do not have the proper country id code to install a new ROM ( Orange Netherlands), which is what started this mess.
Humbly hoping for your help...
Arnout
[email protected]
msn: [email protected]
fixed!
thanxs to evert-999 (thanxs, mate!!!!!) i was able to overcome the country id error and install wm2k5. After this everything works again!!!
Only thing weird is i still get a windows mobile 2003 screen when i reboot...does everybody have this?
ba bootloader serial v2.06
I suffered the same. so u have company.
Ifailed in my upgrade on my ba from radio rom v1.12 to v1.13. my ba got stucked in the bootloader mode in the course of upgrading.I cannot secure the ppc data. I have to downgrade it from rom v1.40 to v1.31 to FREE it b4 I upgrade back to rom v1.40 again with radio rom v1.12 I tried twice and the same thing occured. for the time being I have to be contented with my v1.40 and radio rom v1.12.
any insight on where I went wrong?
Stuck in bootloader
I GOT THE SAME PROBLEM-STUNK IN BOOTLOADER...WT CAN I DO??
IS IT GOING TO UPDATE THE ROM?? BUT GOT ANOTHER PROBLEM WHEN I UPDATE IT IN STEP 1 - ERASING THE ROM...STUCK AGAIN...THEN IT SAY ERROR 112.......
I REALLY NEED HELP...
ANYONE CAN HELP ME, PLz email me.....?
thx..
AKELA
[email protected]
i own i-mate PDA running under Windows Mobile 2003 offcours.
i know everything about programs and how to work with it....
but before one month i heared about Windows Mobile 2005 ... so i used bearshare programe to download it and it success ...
i get these files:
- HimaUpgradeUt.exe
- nk.nbf
- Active Sync 4 setup.exe
then i make backup of my needed files, and i didn't check about any information about my rom version or anything else.
i started the upgrading steps,,,, using HimaUpgradeUt.
and i finished it very will... then i make Hard Reset (as the programe told me) ....
i-mate boot screen appears
then this error comes out:
Device authentication faiure. Please contact the product manufacturer. For reference, please provide your device ID.
0025367000381951 38000050bf3f5173
and the bluetooth led is working, and nothing comes...
this is the big big big problem, so i forced to buy another mobile to use it untill i fix my PDA
i want someone to help me to restore my operating system, or to fix this problem....[/b]
Dear friends
I was tring to upgrade my iMate Pocket PC also know as Himalaya with windows2003 SE , while upgrading I faced problems, the upgarde failed and now I am just getting no display and OS too. The only message displayed is
Serial
v1.03
nothing is working please help
bye with regrads,
your unit is still okay; even better that the usb version is showing on the screen. it's simply stuck on bootloader mode. what kind of problems did you encounter resulting in the failed upgrade?
one suggestion i can give before you downgrade is to try and proceed with the upgrade to se. put your unit back on the cradle but don't expect activesync to "recognize" the device. just put it back on the cradle and rerun the upgrade to se.
same thing happened when i upgraded but to wm2005. the screen showed error and the only thing on the screen was the usb version. i simply cradled back the unit and ran the upgrade. worked.
cheers
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
oh, it appears that you have the "wrong country" id issue. i'm not entirely sure as to how to avoid this but i believe it has something to do with the correct rom version (guys, correct me if i'm wrong). where did you get the rom you used for upgrading to se? downgrading might be the only trick if there is no rom for saudi-based users...but if any chaps presently living there and were successful in upgrading their units perhaps you could share the rom version/s you used?
cheers
yasirirfan said:
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
Click to expand...
Click to collapse
To overcome the Country ID Error, first you need to install this tool...
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.zip
Open the ROM file you want to upgrade, then change the appropriate 'Operator ID' code, after this click 'Save ROM image'.
Upgrade ur device. You will no longer face the error message.