evrey time I try to flash my rom I get an error messege
Code:
ERROR: GetConnectionType - An existing connection was forcibly closed by the rem
ote host.
error getting connectiontype
any clue I flashed it once with one I made from the kitchen and it worked ok now well you see the error any help would be great.
I'm nearly sure you have used a t-mobile ROM on your device. These ROM prohibit flashing with other version via active sync. You have to flash via bootloader and SD-Card.
Instructions how to do this you can find here:
http://lumpistefan.dyndns.org/tools/sd_flash.htm
http://lumpistefan.dyndns.org/tools/sd2_flash.htm
HTH
Stefan
well the one I had flashed to it was a 2003 final image i made in your lovely kitchen, By the way that is awsome peice of codeing. and it worked but I couldnt get it to take another, so I did the SD flash and downgraded back to a 2002 image and it workked and I did an active sync flash and put it back to 2003 lol but it seems when I put a 2003 image on it the only way for me to flash it again is to do the boot loader method. its kinda odd
but thanks.
Do you know of any tool to get better signal strength? like a hack to controll the out put of the radio?
Related
Well,
strange things happen and I guess I am now in the middle of it!
While seperating the nb files from the nbf I created several single nbf out of it. One for the OS, 1 for the splash, 1 for RADIO and so on!
How ever, the thing what really drives me nuts: I just can't get the EXTENDED ROM to work! No matter what I tried - nothing happens after flashing! The old Extended ROM persists in the phone!
I used MOLSKI>biz to unpack my ROM and nbftools to repack. I have no idea what else to try! Flashing works fine but the stuff is not there afterwards!
Any suggestions?
Locked G4 cannot change extension ROM content.
Did you tried using HardSPL?
Yes, but it seems like the download file is corrupt! Getting always a CRC CHECKSUM error when trying to run it directly or extracting manually!
And no success while working with SoftSPL - flashing OS is no problem, everything else gets flashed somewhere to NIRVANA ...
I've been having a few odd problems trying to get my C550 to flash a ROM of any kind using MTTY or Tera Term. I had been planning to reflash an old QTek ROM that I had on there, with one of the newer WM6.x ROMs that you guys have managed to put together. To recap, my C550 already has SuperCID, the SPL has been reflashed using Patched RUU and now reports 1.0.77 rather than the 1.0.16 or my other stock C550.
I can enter the bootloader fine and can connect to it using Mtty, making it respond to successfully to info and format commands, but when I try writing a new ROM, it just sits there doing nothing. I know it takes a while to reflash, but on my device it doesn't actually do anything even if you leave it for a couple of hours. The log looks as follows:
Cmd>l c:\rom.bin
clean up the image temp buffer at 0x8C080000 Length 0x01C40000
MTTYDownloadImage "c:\rom.bin"
:F=c:\rom.bin
start download​
The phone itself can be successfully reflashed using a ROM install package such as that of the old QTek ROM, or another T-Mobile ROM I have. The device can also be made to dump the current ROM to the miniSD card, so the bootloader seems to be functional. Which makes me wonder why this isn't working? I've tried flashing with and without the sim card, and also with and without an sd card in the handset, but it doesn't seem to make any difference.
If anybody has any suggestions of something else I could try, I'd greatly appreciate it! I had been thinking of trying to find an image dump of a WM6 ROM that I could then restore from miniSD, so if anybody would be able to that, it would also be appreciated.
Thanks for your help!
chilano
Please ignore the post above, I realised the SPL upgrade didn't seem to take until I used a different download of spl566wm6_spfans2006.nbf. Everything works fine now anyway.
Cheers for the wonderful work guys
Hi guys, hope you can help me.
I have a Hd2 and have flashed it with sspl and a custum rom etc. i managed this as the post in question gave a link to the flashing program, but the new version does not provide a link, so questions:
1) are flashing programs gneric? as in can i just replace the nbh file next to the flasher program and it will flash the new rom or is each flasher tied to the rom 9such as each one writes different data depending on the rom)
2) is the flashing program for a radio the same as the one for a rom? can i use a flasher program to flash a radio and the same one to flash a rom?
3) is the flasher for other HTC devices the same as the one for the HD2? i have an image file from a older HTC device, could i replace the nbh file in that with the one i want to flash and it works?
P.s. the rom i use is atemidis and i am interested in dutty`s new rom as the new artemdis has problems with things missing.
dutchtrance said:
Hi guys, hope you can help me.
I have a Hd2 and have flashed it with sspl and a custum rom etc. i managed this as the post in question gave a link to the flashing program, but the new version does not provide a link, so questions:
1) are flashing programs gneric? as in can i just replace the nbh file next to the flasher program and it will flash the new rom or is each flasher tied to the rom 9such as each one writes different data depending on the rom)
Click to expand...
Click to collapse
not sure, they may be, but why risk it since all(most)roms come with a customruu.exe anyway
2) is the flashing program for a radio the same as the one for a rom? can i use a flasher program to flash a radio and the same one to flash a rom?
Click to expand...
Click to collapse
yes, however you said you used sspl, , , sspl wont work for radios.
3) is the flasher for other HTC devices the same as the one for the HD2? i have an image file from a older HTC device, could i replace the nbh file in that with the one i want to flash and it works?
Click to expand...
Click to collapse
the nbh file is the actual ROM, if you flash a rom from a different phone, , well, just dont.
P.s. the rom i use is atemidis and i am interested in dutty`s new rom as the new artemdis has problems with things missing.
Click to expand...
Click to collapse
dutchtrance said:
1) are flashing programs gneric? as in can i just replace the nbh file next to the flasher program and it will flash the new rom or is each flasher tied to the rom 9such as each one writes different data depending on the rom)
Click to expand...
Click to collapse
As far as I know they are, as in you should be able to use any of them to flash any ROM onto the HD2 (I've done this plenty of times, though alot of times I will use the one that comes with the ROM). Note that not all of them are the same as some will perform task29 before flashing the ROM or another trick.
Thanks for the help thus far.
You've confirmed what i thought.
I installed the new spl-2.08.HSPL, then installed the recomended radio.
I`ve then flashed the athedies v28 gen 2 but it wont boot into windows, it just hangs at the red/orange screen with the big windows logo where it says its setting up the today screen.
I gather that i can flash a new image as i have the hspl, but how do i go about doing this as i cannot get an activ sync connection in windows to launch the flasher.
I assume i can hold down the down key to get into the HSPL menu and then flash from there some how? does this mean i have to do a flash from the memory card?
I have managed to flash by holding down the down key and getting into the 3 colours screen and then i can flash from there, but the thing still hangs at the red/orange screen. think its the rom
Hey Guys,
I know that there propably existed several threads about this topic, although I could not find one, which really helps me or I still wasn't sure what to do.
So I hope you can help me doing this successfully and getting rid of my hd2 ...
I flashed a Nexus ROM, have Magldr on it and try to get my phone back in Windows Mobile 6.5 for guarantie issues.
So first I know that I have to get the right ROM ... I have read that this would work via htc.com but to be honest, I just find there ROM Upgrades, no original Stock ROMS to download. TO mention, I am looking for the German Stock ROM.
My next question is, if everything will be gone when flashing?! ... MAGLDR,HSPL ... that stuff?
I just downloaded an upgrade ROM from HTC which is working with my S/N off the phone, but it is an .exe file. I can install that, while plugging my phone to my laptop, or I just unrar that .exe and get several files. One of that is .ruu ...
I have read in another thread that this file is to rename. After that I should put it on my sd Card and flash that. Is that right? I am not quite sure about unrar an .exe file and getting so much files, while just using the .ruu ...
I hope that someone takes a little bit of time and answers the questions. Would be very kind. Looking forward to some replys ...
Thanks a lot in advance
First of all, congratulations to your first post.
See post #2 of one of these threads:
http://forum.xda-developers.com/showthread.php?t=1170691
http://forum.xda-developers.com/showthread.php?t=1177771
http://forum.xda-developers.com/showthread.php?p=15937389
thanks a lot.
So one question remaining ... As is said I just can download ROM Upgrades but not the original stock ROM ... is that okay, does that work?
ROM Upgrade means full original STOCK ROM.
Done everything as described.
First Update my Phone froze ... I started it again
Second attempt:
LEOIMG.nbh FAIl
the rest is listed with "ok"
RUU_Wallpaper1 FAIL
=> Update Terminate / Update Fail written on the screen ..
what now ?
Your HD2 shouldn't do that.
What are the warrenty issues you wanted your HD2 flashed back to WM6?
You can try to install HSPL and do a Task29 before you start the procedure again.
Well it froze all the time, when activating wifi or mobile data ... when activating that it gets kind of warm in the back of sd card ... I guess it is the cpu .. so I want to send it back where I bought it, because it is an hardware issue in my opinion ... tried three different softwares (win mobile, android desire and nexus) ...
Well is there any guide of reinstalling hspl and doing a task29, whatever that is
Search function is a very usefull tool...
Maybe you will have a look here: http://forum.xda-developers.com/showthread.php?t=713977
Yes I know, I am sorry ... started to use that ....
Installed HSPL new, did a task29
followed the instructions again ... the same ...
the suspect thing is that every try of the new rom anohter thing fails ...
this time OS failed, the rest worked .... last time wallpaper1 failed, the next time wallpaper 1 worked, but two failed ... I don't know what to do ...
And it is totaly correct that I just put the LEOIMG.nbh on the sd card ?
What are my options ... talking to HTC support?
Kind of despered now
Yes, to copy RUU_signed.nbh file to SD and then to rename it to LEOIMG.nbh is the only thing you have to do.
Have you tried another SD?
Have you tried to redownload the ROM file? Maybe your file is corrupted.
Have you removed HSPL before you tried to flash?
Is your battery fully charged?
Well it worked finally ...
I started the flash and put the phone in the fridge => ... flash successfull ... I gues that is the evidence that there is a serious hardware issue ...
thanks for your great help and taking time ... now I can send it back to Amazon ...
I've had some fun with the TG01 after finding after a couple of years, manged to play a few roms 6.5>7 and back to 6.5 and then managed to brick it after messing with EFS2 in a bid to unlock.
Thanks to qinwengui I managed to get it working, but I'm stuck with one ROM that I would like to change from.
At the moment I have 'miRom 7 radio 0321' rom running from mirolg's thread " http://forum.xda-developers.com/showthread.php?t=1367055" but I can not change it to any other other rom??
I've been trying to change to another one or two that I'd like to try from the rom section but they will not boot.
I can sucessfully use TG downloader or MicroSD card and although any other rom will flash, the phone will not boot.
After ever attempt, I need to go back to miRom 7 radio 0321, which works fine everytime.
Am I missing something obvious?
I've only tried the following "[ROM][miROM1_rel. 6][ENG][18.04.2011] HTC SENSE 2021 with 96 MB free RAM " &
"[ROM][miROM12][ENG 31.12] [GER 02.01] NEWest Build 29007 OS6.5.3 CLEAN 94 MB free RAM" but they will not boot up.
I suppose I'm grateful I have the phone working again in the main, but I'd love to try another ROM if possible.
As said, can use TG Downloader, 100% sucessful message appears, phone will not restart automatically. When I manually restart, green light, will not boot.
I can also use SDDL/prg, phone shows white screen, do not remove SD or power off, takes a while, then will not boot.
Any ideas would be truly appreciated.
D
Hi.
First I suggest to flash any official rom ( it was said in different threads it could help in some cases because it contains full kernel ). If it works You will be able to flash any custom roms. It it not help, maybe You have not original bootloader from WM6. but this one that was needed to install WP7 ?
Regards
fdjacentyfd
Thanks for the advice and good shout for the boot files. Any quick way to check? I have tried a malaysia official rom as I could not find much else -
TG0110_5005180028TSW.tsw but still same, not boot. Thanks though
I guess , roms You want to flash have not radio 321 ?
I think You will be able to flash any rom with radio 321 so maybe simply change a radio in any rom You want to have to radio 321. First start with official rom. Maybe after success of such operation You will be able to flash any rom with radio other than 321.
Regards
Wow, That's me lost now
I just followed every step from this post "[GUIDE] upgrade to wp7 / flash wp7 rom/ downgrade from wp7 to 6.5 WM OS"
My thinking was in case as you mentioned the boot files were wrong, all worked right up to boting on WM7 rom and I got a black screen with a picture of the phone connected to PC in white colour. Could not get past that. Now backtracking and also following the get back to WM6.5 tut and another rom, still no go. As I write, trying the 0321 rom that has been working. I can't get my head around this.....
Are you thinking that I can only use a rom with the radio 0321? Is this my problem?
Long pause as the 0321 rom via tg downloader is on 99%, may aswell wait to update -
WORKING! Absolutely stuck as to why this is the only rom that works, tried a few 6.5, a few WM7???
D
I am bit confused now . What is working ? Still Miro7 rom with radio 321 loaded via tg downloader ? If so , could You test any official rom ( use sdll+ ) changing it radio to 321 ? Radio 321 has always been "suspicious" for me. Taken from God knows where with for eample battery driver bug . That is why I do not use it even if some people
are say enthusistic oppinions about it.
Regards
yes, sorry for any confusion. The only rom I can get workign is the 0321 rom posted on mirolgs tut for 6.5>7>6.5??
thanks !
fxdjacentyfxd.... thank you Changed rom 0321, job done! TY!!