Hey Guys,
I know that there propably existed several threads about this topic, although I could not find one, which really helps me or I still wasn't sure what to do.
So I hope you can help me doing this successfully and getting rid of my hd2 ...
I flashed a Nexus ROM, have Magldr on it and try to get my phone back in Windows Mobile 6.5 for guarantie issues.
So first I know that I have to get the right ROM ... I have read that this would work via htc.com but to be honest, I just find there ROM Upgrades, no original Stock ROMS to download. TO mention, I am looking for the German Stock ROM.
My next question is, if everything will be gone when flashing?! ... MAGLDR,HSPL ... that stuff?
I just downloaded an upgrade ROM from HTC which is working with my S/N off the phone, but it is an .exe file. I can install that, while plugging my phone to my laptop, or I just unrar that .exe and get several files. One of that is .ruu ...
I have read in another thread that this file is to rename. After that I should put it on my sd Card and flash that. Is that right? I am not quite sure about unrar an .exe file and getting so much files, while just using the .ruu ...
I hope that someone takes a little bit of time and answers the questions. Would be very kind. Looking forward to some replys ...
Thanks a lot in advance
First of all, congratulations to your first post.
See post #2 of one of these threads:
http://forum.xda-developers.com/showthread.php?t=1170691
http://forum.xda-developers.com/showthread.php?t=1177771
http://forum.xda-developers.com/showthread.php?p=15937389
thanks a lot.
So one question remaining ... As is said I just can download ROM Upgrades but not the original stock ROM ... is that okay, does that work?
ROM Upgrade means full original STOCK ROM.
Done everything as described.
First Update my Phone froze ... I started it again
Second attempt:
LEOIMG.nbh FAIl
the rest is listed with "ok"
RUU_Wallpaper1 FAIL
=> Update Terminate / Update Fail written on the screen ..
what now ?
Your HD2 shouldn't do that.
What are the warrenty issues you wanted your HD2 flashed back to WM6?
You can try to install HSPL and do a Task29 before you start the procedure again.
Well it froze all the time, when activating wifi or mobile data ... when activating that it gets kind of warm in the back of sd card ... I guess it is the cpu .. so I want to send it back where I bought it, because it is an hardware issue in my opinion ... tried three different softwares (win mobile, android desire and nexus) ...
Well is there any guide of reinstalling hspl and doing a task29, whatever that is
Search function is a very usefull tool...
Maybe you will have a look here: http://forum.xda-developers.com/showthread.php?t=713977
Yes I know, I am sorry ... started to use that ....
Installed HSPL new, did a task29
followed the instructions again ... the same ...
the suspect thing is that every try of the new rom anohter thing fails ...
this time OS failed, the rest worked .... last time wallpaper1 failed, the next time wallpaper 1 worked, but two failed ... I don't know what to do ...
And it is totaly correct that I just put the LEOIMG.nbh on the sd card ?
What are my options ... talking to HTC support?
Kind of despered now
Yes, to copy RUU_signed.nbh file to SD and then to rename it to LEOIMG.nbh is the only thing you have to do.
Have you tried another SD?
Have you tried to redownload the ROM file? Maybe your file is corrupted.
Have you removed HSPL before you tried to flash?
Is your battery fully charged?
Well it worked finally ...
I started the flash and put the phone in the fridge => ... flash successfull ... I gues that is the evidence that there is a serious hardware issue ...
thanks for your great help and taking time ... now I can send it back to Amazon ...
Related
Hello,
i just want to ask if maybe one of the admins could contact the developers of HSPL, because there are many who bricked their devices because of SPL 3.03. Or maybe one of the developers themselves will read this. HSPL is the last way out in most cases (or finding somebody with a ORT JTAG Tool).
I know that you better should not update a device without collecting information before it. Indeed!
My last phone was a iPhone, so I know what I´m talking ´bout, but sometimes it just happens that you might have skipped any important information or hint.
So please help :/
You bricked your device? wow!
May be you are just stick on the boot screen where it says SPL 3.03, because you tryed to flash a ROM from the SD card that is not for your operator?
Well, if this is the case just flash an older official ROM for your operator, again from the SD card. Than you can use the actual HSPL and flash a custom ROM. That fixed it for me.
idimdim said:
You bricked your device? wow!
May be you are just stick on the boot screen where it says SPL 3.03, because you tryed to flash a ROM from the SD card that is not for your operator?
Well, if this is the case just flash an older official ROM for your operator, again from the SD card. Than you can use the actual HSPL and flash a custom ROM. That fixed it for me.
Click to expand...
Click to collapse
of course i already tried that, does not work.
You are not clear.
Can you get your device to boot loader?
If yes, then you can try Gold card method from there.
yes that still works, but i tried goldcard method today (1 time with the rom which bricked my device und with a custom rom and the original orange rom [my hd2 has a orange branding]) and it was not the solution for my problem :/
edit: oh and if it´s of interest: when trying to flash with goldcard method the rom which bricked it, i get the white screen with "Loading..." in the middle and then it says "Not allow" also on a white screen and "0028002" written in red, then gets back to bootscreen.
well since u can get to ur bootloader consider urself lucky it aint bricked..
Do one thing, get the newest stock rom from htc (same spl 3.03) and make sure its the right one for your device(when you enter your serial no. it should accept and give u a download link).
then try flashing that rom..
It should get you up and running.
After that you can start worrying about getting back to the old spl and/or hardspl
New HSPL
I am stuck with the same thing.
If i could only geat a new HSPL for spl 3.03.0000
[email protected] said:
I am stuck with the same thing.
If i could only geat a new HSPL for spl 3.03.0000
Click to expand...
Click to collapse
Try flashing an older stock Rom one that is covered by hspl via SD card method. Then whenever you like to install that latest 3. 14 Rom do it via usb method.
jjblaster3 said:
Do one thing, get the newest stock rom from htc (same spl 3.03) and make sure its the right one for your device(when you enter your serial no. it should accept and give u a download link).
then try flashing that rom..
Click to expand...
Click to collapse
that´s exactly where my problem is...
my HD2 has a orange branding and is from france. i downloaded a rom from a link somewhere in xda threads, but it´s a really old rom version. the idiots of orange support posted me a link to the touch hd rom^^, so i even don´t know if there is a rom out there.
dunno if it would help posting my serial here...
i tried to decrypt it for finding information about my model, but the only information i can get is the day of production by the first few numbers and letters :/
OlDirty89 said:
that´s exactly where my problem is...
my HD2 has a orange branding and is from france. i downloaded a rom from a link somewhere in xda threads, but it´s a really old rom version. the idiots of orange support posted me a link to the touch hd rom^^, so i even don´t know if there is a rom out there.
dunno if it would help posting my serial here...
i tried to decrypt it for finding information about my model, but the only information i can get is the day of production by the first few numbers and letters :/
Click to expand...
Click to collapse
You might want to look into the download.. if it's an MFG SPL you're stuck with it
Can you provide the link please?
So from what I understand, OlDirty89 failed to read the fine print and is now in possession of an un-usable phone.
I remember when XDA was actually a community where users like this could actually get help when faced with a situation like this...
EX> I was a noob once. My first PPC was a WM5 HTC Wizard/aka/T-Mobile MDA. I actually stumbled across this forum by accident looking for cool new apps for my phone since lets face it.. WM5 is very bland. I saw what I thought was the coolest thing I'd ever seen - a complete OS replacement loaded with new features I'd never seen on a phone before and sure enough, without reading, I downloaded and attempted to flash the ROM. Naturally, it failed and I panicked. I had paid just over $300 for the phone after all.. I came back to this site, opened a new thread titled "PLEASE HELP ME!!" and within an hour, the more seasoned users on this site helped me restore my phone to the factory state and guided me in the right direction, teaching me everything I could have ever wanted to know about WM and how to customize it. I did eventually get that cool custom ROM on my Wizard and became an established member of the community.
^^^^ This is why I absolutely CANNOT STAND flamers... Flaming a user for being less knowledgeable than you is just plain pathetic... Shows what you're like on the other end of the keyboard too... You know it was really funny because I stumbled across a statistic once that stated that 60% of users who join these forums and flame other users are overweight virgins living with their parents... Just thought that was a funny statistic worth mentioning...
Now with all of that being said.. Let's help this guy. He clearly needs it else he wouldn't have posted this thread asking for it. I'm not saying that someone should write a step-by-step tutorial right here in this thread telling him exactly how to undo what he's done, just guide him in the right direction...
This speech really reminds me of a movie I saw not too long ago...
"Pay it forward..."
Just my 2 cents...
dharvey4651 said:
So from what I understand, OlDirty89 failed to read the fine print and is now in possession of an un-usable phone.
I remember when XDA was actually a community where users like this could actually get help when faced with a situation like this...
EX> I was a noob once. My first PPC was a WM5 HTC Wizard/aka/T-Mobile MDA. I actually stumbled across this forum by accident looking for cool new apps for my phone since lets face it.. WM5 is very bland. I saw what I thought was the coolest thing I'd ever seen - a complete OS replacement loaded with new features I'd never seen on a phone before and sure enough, without reading, I downloaded and attempted to flash the ROM. Naturally, it failed and I panicked. I had paid just over $300 for the phone after all.. I came back to this site, opened a new thread titled "PLEASE HELP ME!!" and within an hour, the more seasoned users on this site helped me restore my phone to the factory state and guided me in the right direction, teaching me everything I could have ever wanted to know about WM and how to customize it. I did eventually get that cool custom ROM on my Wizard and became an established member of the community.
^^^^ This is why I absolutely CANNOT STAND flamers... Flaming a user for being less knowledgeable than you is just plain pathetic... Shows what you're like on the other end of the keyboard too... You know it was really funny because I stumbled across a statistic once that stated that 60% of users who join these forums and flame other users are overweight virgins living with their parents... Just thought that was a funny statistic worth mentioning...
Now with all of that being said.. Let's help this guy. He clearly needs it else he wouldn't have posted this thread asking for it. I'm not saying that someone should write a step-by-step tutorial right here in this thread telling him exactly how to undo what he's done, just guide him in the right direction...
This speech really reminds me of a movie I saw not too long ago...
"Pay it forward..."
Just my 2 cents...
Click to expand...
Click to collapse
Great post
But I hate to say, unless we can get some powerful brainstorming goin on and figure out how to drop an engineering SPL (MFG) with mtty I don't think we can help..
I started a thread a little while back -- Stuck with SPL 2.02.0000 - Test ROM? that you might wanna read through to understand your situation a little better.
And just fyi, you can play/flash between 2.02 and 2.03 without problems, just DON'T try flashing 2.01 from those two.. left me with a lovely little brick.
(this is only if you flashed the 2.03 from this thread)
OlDirty89 said:
that´s exactly where my problem is...
my HD2 has a orange branding and is from france. i downloaded a rom from a link somewhere in xda threads, but it´s a really old rom version. the idiots of orange support posted me a link to the touch hd rom^^, so i even don´t know if there is a rom out there.
dunno if it would help posting my serial here...
i tried to decrypt it for finding information about my model, but the only information i can get is the day of production by the first few numbers and letters :/
Click to expand...
Click to collapse
Use SSPL and it will install your Custom or Stock ROM without any problem.
Download from here http://forum.xda-developers.com/attachment.php?attachmentid=260802&d=1261873816
OlDirty89 said:
of course i already tried that, does not work.
Click to expand...
Click to collapse
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Scabes24 said:
You might want to look into the download.. if it's an MFG SPL you're stuck with it
Can you provide the link please?
Click to expand...
Click to collapse
http://www.megaupload.com/?d=BC4FGYH4
it´s 1.43
dharvey4651 said:
So from what I understand, OlDirty89 failed to read the fine print and is now in possession of an un-usable phone.
I remember when XDA was actually a community where users like this could actually get help when faced with a situation like this...
EX> I was a noob once. My first PPC was a WM5 HTC Wizard/aka/T-Mobile MDA. I actually stumbled across this forum by accident looking for cool new apps for my phone since lets face it.. WM5 is very bland. I saw what I thought was the coolest thing I'd ever seen - a complete OS replacement loaded with new features I'd never seen on a phone before and sure enough, without reading, I downloaded and attempted to flash the ROM. Naturally, it failed and I panicked. I had paid just over $300 for the phone after all.. I came back to this site, opened a new thread titled "PLEASE HELP ME!!" and within an hour, the more seasoned users on this site helped me restore my phone to the factory state and guided me in the right direction, teaching me everything I could have ever wanted to know about WM and how to customize it. I did eventually get that cool custom ROM on my Wizard and became an established member of the community.
^^^^ This is why I absolutely CANNOT STAND flamers... Flaming a user for being less knowledgeable than you is just plain pathetic... Shows what you're like on the other end of the keyboard too... You know it was really funny because I stumbled across a statistic once that stated that 60% of users who join these forums and flame other users are overweight virgins living with their parents... Just thought that was a funny statistic worth mentioning...
Now with all of that being said.. Let's help this guy. He clearly needs it else he wouldn't have posted this thread asking for it. I'm not saying that someone should write a step-by-step tutorial right here in this thread telling him exactly how to undo what he's done, just guide him in the right direction...
This speech really reminds me of a movie I saw not too long ago...
"Pay it forward..."
Just my 2 cents...
Click to expand...
Click to collapse
thanks for that. we could not be a specialist in everything
netvpn7 said:
Use SSPL and it will install your Custom or Stock ROM without any problem.
Download from here http://forum.xda-developers.com/attachment.php?attachmentid=260802&d=1261873816
Click to expand...
Click to collapse
SSPL does not work on my device at the moment.
idimdim said:
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Click to expand...
Click to collapse
i´m trying that right now (download is active)
idimdim said:
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Click to expand...
Click to collapse
Downloading ...
looks like I am also stuck on bootloader with SPl 3.03,nothing I did helped so far,I had HSPL3,my stock Rom was 166.707.
any help is greatly appreciated.
OlDirty89 said:
Hello,
i just want to ask if maybe one of the admins could contact the developers of HSPL, because there are many who bricked their devices because of SPL 3.03. Or maybe one of the developers themselves will read this. HSPL is the last way out in most cases (or finding somebody with a ORT JTAG Tool).
I know that you better should not update a device without collecting information before it. Indeed!
My last phone was a iPhone, so I know what I´m talking ´bout, but sometimes it just happens that you might have skipped any important information or hint.
So please help :/
Click to expand...
Click to collapse
I experienced same things after return my phone for screen problem. Orange france gave me a new one and then my problem began. I made all the needed steps to flash a new radio and Artemis ROM and my phone became crazy. Radio failed at 99%, random soft reset etc... By chance there is a new version (1.72) on the website of orange. With HSPL2 i managed to downgrade the SPL to 1.66 version and flash with the last official orange ROM.
Frequently, my phone continue to soft reset itself and became crazy. Can't use it on a whole day, without soft reset 10 times. I decided to return it to Orange (SPL, ROM and Radio where the good ones). Received a new one, immediatly flash my phone with artemis V36 and radio 2.10.50_28 and all is ok with this last phone.
Probably problems come from the phone and not the way you try to revert back...
idimdim said:
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Click to expand...
Click to collapse
omg....great. it worked! i love u guys
i knew i will get help here
jovanoti
Hi, I've got the same problem with my Orange HD2.
I can not find any original older ROM to flash with HSPL.
No any chance to install any different rom than my "French language" ROM which is my exact problem I wanna WWE.
I need to sent my hd2 to HTC for warranty purposes. I'm a newbie in this and i know how to uninstall hspl2. Just wondering about the radio rom, do i flash back to original radio rom first before uninstall hspl2 or can i just flash it straight using the microSd method. Thanks
jingwen91 said:
I need to sent my hd2 to HTC for warranty purposes. I'm a newbie in this and i know how to uninstall hspl2. Just wondering about the radio rom, do i flash back to original radio rom first before uninstall hspl2 or can i just flash it straight using the microSd method. Thanks
Click to expand...
Click to collapse
Flashing the original stock ROM over SD will remove HSPL, will bring your radio on the version who is integrated in stock ROM and brings you back on stock settings.
So the only thing you need to do is flashing over SD
thanks alot!
can some body help me how to flash over the sd ???
i just flash the elegancia rom and ryt now i need to get back to the original windows mobile that i bought it,,
any solutions ???
thx before !!!
safio911 said:
can some body help me how to flash over the sd ???
i just flash the elegancia rom and ryt now i need to get back to the original windows mobile that i bought it,,
any solutions ???
thx before !!!
Click to expand...
Click to collapse
1) Download the correct Stock ROM from the HTC Webpage by using your S/N. (you will get a RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file.)
2) Right click on the RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file and select extract with 7Zip/WinZip
3) Prepared your SD-card (use a 2 or 4GB SD no bigger) and format it by FAT32
4)Take the "RUU_signed.nbh" from it and copy it to SD card.
5) Rename the "RUU_signed.nbh" to "leoimg.nbh"
6) Reset the device while pressing the volume down button
7) Follow the instructions mention on your screen
i've done that. worked so far to flashed my HD2 without errors.
but after i come to home screen my HD2 acts like someone's permanently pressing VOL(-). don't matter what i press or do. i tried a lot of different ROMs, flashing by cable or with SDcard, task29, diff. radio, flash hspl new. all that.
i'm going crazy 'bout that :'(
any idea what i could do?
thanks!
dj_memory said:
i've done that. worked so far to flashed my HD2 without errors.
but after i come to home screen my HD2 acts like someone's permanently pressing VOL(-). don't matter what i press or do. i tried a lot of different ROMs, flashing by cable or with SDcard, task29, diff. radio, flash hspl new. all that.
i'm going crazy 'bout that :'(
any idea what i could do?
thanks!
Click to expand...
Click to collapse
Get start to give us some more device information.
- witch Rom version do you have now?
- Radio version?
- SPL/HSPL version?
i tried to flash the latest official HTC ROM: "HTC_HD2_5CRUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship" to get shure its no ROM problem.
Radio i had on my HD2 was: Radio_Leo_2.15.50.14 witch worked well for the last 3 months!
HSPL is: 2.08HSPL
i also had to say that before that i flashed gingerbread on NAND. working fine (exept battery drain and the default known ROM problems
an there i had also a VOL (-) problem (see http://forum.xda-developers.com/showthread.php?t=906881)
because of that i wanted to change back to WM.
and thats the state know!
i first thought my bad usb-connector causes flash problem (i found 2 bad made conntacts under the microscope), thats why i flashed wia SD now.
dj_memory said:
i tried to flash the latest official HTC ROM: "HTC_HD2_5CRUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship" to get shure its no ROM problem.
Radio i had on my HD2 was: Radio_Leo_2.15.50.14 witch worked well for the last 3 months!
HSPL is: 2.08HSPL
i also had to say that before that i flashed gingerbread on NAND. working fine (exept battery drain and the default known ROM problems
an there i had also a VOL (-) problem (see http://forum.xda-developers.com/showthread.php?t=906881)
because of that i wanted to change back to WM.
and thats the state know!
i first thought my bad usb-connector causes flash problem (i found 2 bad made conntacts under the microscope), thats why i flashed wia SD now.
Click to expand...
Click to collapse
First of all remove your HSPL; HSPL and stock ROM 3.14 isn't compatible and create lot of issues/problems.
allready done (by flashing via SD) ?!
as written here:
http://forum.xda-developers.com/showthread.php?t=623402
for me it looks like WM is missing a sound file or something like that, and thats why it permanetly switch down VOL.
because i get a "file missing" windows for a few ms, but there is no concret file name so i don't now really whats missing
is this possible?
i solved it!
I've got no idea why but its working!
I started the SD update process once more (the third time now
(nothing changed!)
what I've done is i waited after reboot till it locked it selves (screen black)
but i think that made no difference
probleme there again
once more bad news.......tomorrow mornig my HD2 is going crazy again :'(
actual state: my VOL(-) button isn't working.
so i think the real problem was my (know) defect VOL (-) button.
sometimes working sometimes not....
Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..
Hi, im getting very annoyed with my phone, probably something to do with i don't know what the hell im doing. Basically my phone has lately started to go crazy and constantly reboots, only getting to the orange windows screen. and very rarely boots up. I have the o2 HD2. Ive tried hard reseting..and taking out cards and booting but nothing seems to help. So i spotted the new generic 3.14 rom on the official htc website and downloaded it and thought it would fix it all. But now it wont work, it gets to %100 on the ROM update utility and says '' ERROR 270:UPDATE ERROR - The image file is corrupted, Please check your update utility. Ive downloaded it twice now as it told me as it was corrupt, to download and try again, but its doing the same. Now my hd2 is stuck on the multi colored screen and will NOT boot. Someone please help me, and try to have patience with me as im un-familiar with all this . Someone taking the time to help me would be VERY appreciated. Thanks.
theres a real o2 3.14 rom HERE
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
or you need hspl
Hey Brandon911 after you manage to flash the ROM member samsamuel was kind enough to link for you. If you don't know how to flash the ROM simple put your HD2 in bootloader(tricolor screen) and run the RUU or exe wich ever one it has once you exsrtact/unzip the zipfile. Make sure it says USB in the white bar of bootloader though before you run the updat utility.Anyway once you flash the ROM check your pins that connect to the battery cause I am willing to bet you have been dueing a lot of battery pulls and might have inadvertantly bent one of your pins. I say this cause you said your HD2 was "constantly rebooting".
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Brandon911 said:
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Click to expand...
Click to collapse
I don't see no real reason you should not try a custom ROM. Just make sure and tbis is very important, if the custom ROM has a radio that comes with it, that the radio is compatible with your o2 HD2. I am also sure when samsamuel gets to read this thread again he will be abale to offer more help, probably better than I.
Edit: You will have to have HSPL flashed to your HD2 to flash a custom ROM.
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
hspl4, supports 3.03. If you want to use magldr you will need to go to 2.08.hspl
Brandon911 said:
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
Click to expand...
Click to collapse
Did you use HSPL 3 OR HSPL 4You should use HSPL 4.
Hi guys and girls, I have just purchased a HD2 and would like to install android gingerbread (or whatever is easiest and best)... i have read through the how-to threads on here made by tytung - http://forum.xda-developers.com/showthread.php?t=905060 - (including the apparent 'beginners' guide for installing ROMs etc) a million times and being the worlds most useless person with a mobile i just dont have the courage to do it as i dont understand none of the terminology or how to install any of the links etc... could somebody please point me in the direction of a full step-by-step guide for dummies lol
i am currently running on:
flash size: 512mb
OS version: 5.2.21864 (21864.5.0.81)
ROM version: 1.43.405.1 (70124) WWE
ROM date: 10/26/09
Radio version: 2.04.50.22_2
(i believe these are the ones most mentioned in the threads... but mean nothing to me )
i could literally do with the dummies guide with pictures the lot if possible lol.. BUT any help for a so called 'newb' would be very much appreciated.
thanks in advance
Tbh the easiest thing to do is flash hard spl then boot your desired build via SD. Unfortunately I'm on my phone so I can't link but if search the hd2 thread its all there. Also if you Google hd2 android Roms there all in one place and also tell u what type they are nand, SD ect. If I get to my PC later I'll link all the info.
Hope this helps.
Ok here u go all the info u need should be here. May have to paste the URL as im still on my phone.
http://forum.xda-developers.com/showthread.php?t=732380
Sent from my HTC EVO 3D using XDA App
thanks for that... i would like to install the gingerbread android from this thread http://forum.xda-developers.com/showthread.php?t=905060 as this one looks like the newest/most stable version that has everything working..but because my phone has been factory reset and i think i need the correct radio i am not sure where to get that and how to install it onto the phone to even begin...
i am sorry, i know i am a complete hassle but ya know, the phone is expensive and im a newb, dont want to break it ....
(i held the down vol button and switched it on the other day to see what happens and then the phone didnt switch back on for like 5 mins after, it **** me right up lol, need to be totally sure im doing the right things from now on before i give myself a mental breakdown lol)
i do like the layout of that thread thought where its a step-by-step so id know if i were doing the right things
since the phone is stocked what i have downloaded so far is:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe ... can somebody please confirm that this is the correct thing that i need to install first by going to ROMupdateutility.exe!! .. and anything else i need to do for this...
then i have ''DFT_LEO_MAGLDR113_DAF.rar'' downloaded
aswell as ''MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip'' and the ''NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip''
but which HSPL is best to install to do this? and where to download it from? ... on some threads here they say that HSPL4 is the best, but others say that its not fully safe to use? ...
are these the only things that i have to have to install this? and could somebody please put up a quick step-by-step to install it all pleeeeeeeeeeease, i would be eternally grateful lol
Found this mate
The first thing to do is this
After that then follow step 2 and 3 of Installation Guide for MAGLDR 1.13 in the thread you have posted this will give you CWM and the actual ROM.
The first step is the trickiest but you only have to do it the once and then you can get most ROMs flashed. The most important thing is not to interupt any of the processes or you will brick the device. Btw have a look here too
i followed the steps from the first link you sent and installed recovery, magldr etc... but now on the last step when installing the nand android roms i am stuck...the steps are not clear and there are no roms links to download... the phone is in magldr mode now and i dont know what to do from here.... please help
kezman11 said:
i followed the steps from the first link you sent and installed recovery, magldr etc... but now on the last step when installing the nand android roms i am stuck...the steps are not clear and there are no roms links to download... the phone is in magldr mode now and i dont know what to do from here.... please help
Click to expand...
Click to collapse
View the "Detailed guide" section here: http://forum.xda-developers.com/showthread.php?t=893620 (it instructs you on how to flash roms via magldr; ignore the version of magldr mentioned in step 1).
whats happened is that i have put the gingerbread version from the link i posted into the sd root, but there are 3 files (boot, meta and system) but no files to run?????
i forgot to install the ''NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip'' at the beginning to i installed it afterwards as another thread said i could do if i went into the USB mass stg ... but now, with the 3 files, i dont know what to run on my computer to install android :/
kezman11 said:
whats happened is that i have put the gingerbread version from the link i posted into the sd root, but there are 3 files (boot, meta and system) but no files to run?????
Click to expand...
Click to collapse
So follow the instructions given in that rom's post (See "Installation Guide for MAGLDR 1.13" in it's thread: http://forum.xda-developers.com/showthread.php?t=905060).
in the post it says ''Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).''
when i go to AD Recovery it says ''no boot sources''
when i go to Boot AS SD it says
''andoid load at 11800000
from microSD
load zimage
k: /zimage
SD KERNEL OPEN FAILED''
kezman11 said:
whats happened is that i have put the gingerbread version from the link i posted into the sd root, but there are 3 files (boot, meta and system) but no files to run?????
Click to expand...
Click to collapse
Have you unzipped the file because I believe you place the zip onto your SD still zipped up the flash it using CWM.
Somebody correct me i'm wrong please last thing I booted on my HD2 was via SD and was many months ago.
awww i am beginning to wish i hadnt started ... how do i do that now? i am at the main maglrd screen, when i go to USB mass storage and plug in my usb nothing comes up now either?
if nobody knows please just tell me how to cancel and put it back as it was with windows 6.5 ... thats better than nothing
OK go here and download the file. Unzip it to your desktop boot your handset normally copy the unzipped file to to the root of your SD card then open the folder with your phone and click CLRCAD nothing will happen dont worry then click haret. It should boot be patient as far as I can see it's the same ROM but just in SD format.
how do you run the handset normally now? i am at the magldr screen now and everytime i turn the phone it this screen comes up ...??
kezman11 said:
how do you run the handset normally now? i am at the magldr screen now and everytime i turn the phone it this screen comes up ...??
Click to expand...
Click to collapse
Installing magldr erases your OS, so basically it's the only thing on your device at this point.
RESOLVED !!
Massive thank you to Bebida for helping me to get this working .... the man is a legend !!!
the only issues i have found is that i cant add a new contact.. it goes to sync with email address (for some reason) but then after i fill in the details it still doesnt add ??? dont know whether im doing something wrong or whether theres an issue there !!!
and also every now and again, when i press the apps button it flickers but doesnt come on, but if i leave it a few minutes and then try again, or go into the settings screen it seems to work fine !!!
...
oh and also that the battery seems to be getting eaten rather quickly...whether thats because there alot more going on with the screen now with apps etc i dont know, but im having to order a back up battery i think because i dont have the time to charge up during the day
kezman11 said:
the only issues i have found is that i cant add a new contact.. it goes to sync with email address (for some reason) but then after i fill in the details it still doesnt add ??? dont know whether im doing something wrong or whether theres an issue there !!!
and also every now and again, when i press the apps button it flickers but doesnt come on, but if i leave it a few minutes and then try again, or go into the settings screen it seems to work fine !!!
...
oh and also that the battery seems to be getting eaten rather quickly...whether thats because there alot more going on with the screen now with apps etc i dont know, but im having to order a back up battery i think because i dont have the time to charge up during the day
Click to expand...
Click to collapse
It may be worth going to settings>accounts&sync>google to see if you have auto sync contacts checked if so uncheck and try and add a contact again to see if it is related to that.
My best advise would be to look through the thread where you got the ROM as 9 outa 10 times the issues have been raised and a fix posted.
As for battery it's more than likely you have been hammering the usage and data downloading apps and stuff, I know I do when I flash a new ROM but again check the thread my man.