Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..
Related
Before I flash my phone for the very first time, I need to know some things.
I know there are threads who give info, but they aren't always up-to-date or handeling about my phone.
So I want to know, I heard about a third version of HSPL.
What are the things that I need to do?
If I want to install a new rom, I first install HSPL, then the rom, but do I have to install something like a radio too? or something else?
Will a custom rom always work in my language (BE/DUTCH),
and which rom is good for texting (no lag etc).
I want a clean and smooth rom, with not much BS. Any advice?
I know it's a lot of questions, but I'm stuck with them for a long long time and I want to be well prepared.
Version of OS: 5.2.21869
Manila: 2.5.19211619.0
ROM: 1.66.404.1 (76641) NLD
RADIO: 2.06.51.07
Follow this thread step by step and you cant go wrong.
Its link you to HSPL3 and anything else you might need.
It tells you how to flash a radio (if you need to).....
It will tell you which radio you need in the thread for the rom your going to use....
You just have to read through all the rom threads to find out which one is going to be best for you...... I'd reccomend energy roms... I think they might only be available in english though. Different languages available will be listed in the rom thread...
The flash only takes 10 minutes...its the reading up first thats the time consuming part....
Hope it all goes well for you
thanks for the advice, I will follow it and read everything 10 times before flashing anything
HectiQ said:
thanks for the advice, I will follow it and read everything 10 times before flashing anything
Click to expand...
Click to collapse
Yea. Read it very very very carefully. Once you grasp the process, it's so easy and intuitive.
HectiQ said:
i will follow it and read everything 10 times before flashing anything
Click to expand...
Click to collapse
blimey, you can come again! hehe
So here are the steps that I'm about to take: (first off I saved all my data, sms, etc elsewhere).
1) flash HSPL 3
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
thread HSPL3 said:
Seems all ROMs based on 1.42, 1.66, 1.XX can work with 2.08 SPL without problems.*
Click to expand...
Click to collapse
My ROM is 1.66.404.1 (76641) NLD, so it seems that this is okay to do. I think I have the 'usualleo', can I check this somewhere?
When I look into RAM SIZE, it says 512 MB, and I don't know what telstra is, but I definitly won't need the last one (1024). I also think in HSPL itself, I need to choose 2.08.HSPL.
Next, I'm about to flash my first custom rom, and will follow the steps given here:
Flashing Via ActiveSync
1. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your computer
2. REMOVE SIM and microSD CARDS!! (this is a precautionary measure and is not compulsory)
3. Turn phone back on and wait until it syncs with your PC
4a. If your Rom is a .exe (customRUU.exe is already included in the Rom file) then run the file
4b. If your Rom is a .nbh file then run the CustomRUU.exe from the Roms Folder (if one isnt included then download it *HERE*)
5. Follow onscreen instructions to set up your New Rom
6. Once phone has gone through the customisation procedure then replace Sim and microSD Cards
7. Perform a Hard Reset to clear any leftover data from your previous Rom (see intructions at bottom).
8. Set up phone as required and job done.
Click to expand...
Click to collapse
I really can't find what ROM I should use..
I want a rom with landscape built in and the sms client 2016.
Are there much roms which include this?
yea thats all OK, except you dont really need to remove sim and sd. Only if you're stroubleshooting.
Plus, most cooked roms support 'autoinstall', , , create a folder on your sd card called autoinstall, put in there any cabs that are essentials, and the rom will install them as part of the post flash setup process.
as to which rom for what, thats gotta be down to you. Theyre all good, theres no such thing as a best rom, and what works brilliantly for one person makes the next person weep with frustration.
Flashing only takes 5/10 mins, you can try out a dozen roms in an evening.
Dont forget you only need apply hspl once. It will stay there till you either flash a stock from sd card (dont do this, theres no need nowadays) or you can run hspl2 (yes, hspl2) and choose your stock spl (1.42.0000 or 1.66.0000 or whatever)
can I run HSPL 2 after I firstly installed HSPL 3 for the custom rom I'm about to choose? And I'm guessing roms come packed (7z/zip/rar), need to unpack those files I guess? How do you actually start cooking a rom?
edit: I also gonna remove everything (hard reset) before I start flashing anything, so I start clean
Okay this is coming really close now:
http://forum.xda-developers.com/showthread.php?t=612580
Download Artemis 23.0 level A NLD (this I'm about to use)
I'm gonna go with artemis, but I also want a higher radio version. should I update my radio or my rom first? And how do I know which radio is compactible with that rom? the ones adviced in the rom? http://www.pilotlogic.com/artemis/htc_hd2_radio/ these?
I'm a bit confused what steps to take, in which order.
I know I have to HSPL first, (gonna use HSPL 3)
but then I doubt which to do first, rom or radio. And is it easy to install? Can I make any mistakes on this? what are the things that need special attention? thanks in advance guys, for all the help!
doesn't matter which order, except if you do rom first your phone will hang till you enter bootloader and flash a matching radio so most people say radio first.
heres how i'd do it
1 hspl3 (only needs doing once, not every time you flash)
2 enter bootloader manually
3 flash the radio
4 when it gets to 100% and is about to reboot, hold down voldown to go back into bootloader
5 flash the rom
6 allow phone to boot properly
samsamuel said:
doesn't matter which order, except if you do rom first your phone will hang till you enter bootloader and flash a matching radio so most people say radio first.
heres how i'd do it
1 hspl3 (only needs doing once, not every time you flash)
2 enter bootloader manually
3 flash the radio
4 when it gets to 100% hold down voldown to go back into bootloader
5 flash the rom
6 allow phone to boot properly
Click to expand...
Click to collapse
SUPERB!! Thank you for the clear advice! Will try this step by step tonight. Thanks samsamuel I really like xda everybody is helping out :d
I used the video guides the first time..........
Id have freaked out about the radio hanging at 96% if I hadnt already seen that on the video.
Watch each step before you do it, that way you know what to expect.....
Happy flashing.........
conantroutman said:
I used the video guides the first time..........
Id have freaked out about the radio hanging at 96% if I hadnt already seen that on the video.
Watch each step before you do it, that way you know what to expect.....
Happy flashing.........
Click to expand...
Click to collapse
oh indeed! I'ld freak out too! haha. Gonna check it out. Thanks conantroutman!
I hope the artemis rom (Artemis 23.0 level A NLD)
is compactible with this radio version: 2.10.50.28_2
Maybe anyone knows? if not I might ask it in the Artemis thread
think I'm good to go then, well prepared, thanks to you guys
update, just installed HSPL going slowly to the next step
damn guys? I'm really DOUBTING, should I flash a rom or a radio first?
I'm scared if I flash my rom first my cell won't startup because of incompactibility with my phone's rom? Or reversed ways. Can anyone advise me before I start?
Edit: took a leap of faith and trusted on the posts above, and I'm now running a new radio now only my rom and I'm done. Gonna see the video's and tuts first. I'll keep you updated. WOOOOOOOOOOOOOOW this radio is GREAT! my sound quality has improved like A LOT! very strange, with my original rom, I always heard noises, now it's way clearer when I call
hey man, nearly there.....
once your done you'll wonder what all the fuss was about....
only problem is...... you'll be hooked and looking for something else to flash...
glad its all going well.....
conantroutman said:
hey man, nearly there.....
once your done you'll wonder what all the fuss was about....
only problem is...... you'll be hooked and looking for something else to flash...
glad its all going well.....
Click to expand...
Click to collapse
yes, and it's all thanks to you guys here at xda, I even got to try android wow. But I'm gonna stick to mobile shell for a while, combine it with a new rom I'm about to select
Hi guys I have a HD2 (obviously says you's) that is locked to only installing Vodafone roms. Im stuck on rom 1.72 as Vodafone havent released any newer ones nor are they intending too!
I wanted to install hspl and install the newest htc stock rom. 3.03?
But I am aware that there is no hspl available that will allow you to do this.
So my question is, what is the newest Rom I can install that HSPL can do and where would I get it?
Thank you for your help
Mark
You can only install a stock Rom from your device.
This means if you have a branded device; you can only install stock rom this branded device.
BUT;
You have two solutions:
- Using a custom rom.
- Using the GoldCard solution/technique. in this case you can install stock rom 3.14
i'd suggest going for a custom ROM...the possibilities are endless, check out the ROM Dev. forum and pick the one that suits u best.
Hi thanks for your help. I'm trying the goldcard version now but need a little help please. When it says
1. Download your 3.14 Stock ROM from HTC, Links you will find here:XDA 623283
2. Extract your Stock ROM (RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.1 5 .50.14_LEO_S_Ship.exe)
3. Copy RUU_signed.nbh to your Goldcard and rename it to LEOIMG.nbh
(Use the “Explore” Feature of ActiveSync / MobileDeviceCenter)
What escatly does it mean? I have downloaded the rom which has a the name
"_HTCHD2_RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
What do I do to this now to extract it? When I double click on it it just opens the programme. Could someone help me please.
Thank you
Its ok I worked out how to extract the file thanks. Hopefully it works now
Its still not working.
When I turn the phone off after following all the steps and hold volume down and press power button the bootloader screen laods but it doesnt load the LEOIMG.nbh.
At the bottom it just says 'Serial'.
What am I doing wrong? I have followed all the instructions
Just a morning Bump
You most probably must Format your SD Card,but from my bitter experiance I would consider the steps very carefully before flashing from an SD Card,I was lucky to bring my HD2 back to life after a day of bicking it.
I myself installed the HSPL tried out many custom ROMS but so far couldnt find one without a bug,one thing I noticed common with all of them:my WIFI suffered badly that was my main reason to go back to the stock ROM,which has good WIFI reception now as my laptop!!.
Even the new Stock 3.14 reception was not up to my current one.
This is just my experiance.
I need to sent my hd2 to HTC for warranty purposes. I'm a newbie in this and i know how to uninstall hspl2. Just wondering about the radio rom, do i flash back to original radio rom first before uninstall hspl2 or can i just flash it straight using the microSd method. Thanks
jingwen91 said:
I need to sent my hd2 to HTC for warranty purposes. I'm a newbie in this and i know how to uninstall hspl2. Just wondering about the radio rom, do i flash back to original radio rom first before uninstall hspl2 or can i just flash it straight using the microSd method. Thanks
Click to expand...
Click to collapse
Flashing the original stock ROM over SD will remove HSPL, will bring your radio on the version who is integrated in stock ROM and brings you back on stock settings.
So the only thing you need to do is flashing over SD
thanks alot!
can some body help me how to flash over the sd ???
i just flash the elegancia rom and ryt now i need to get back to the original windows mobile that i bought it,,
any solutions ???
thx before !!!
safio911 said:
can some body help me how to flash over the sd ???
i just flash the elegancia rom and ryt now i need to get back to the original windows mobile that i bought it,,
any solutions ???
thx before !!!
Click to expand...
Click to collapse
1) Download the correct Stock ROM from the HTC Webpage by using your S/N. (you will get a RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file.)
2) Right click on the RUU_Leo_xxx_x.XX.xxx.x_Radio_xx.xx.xx.xU_x.xx.xx.x_LEO_Ship file and select extract with 7Zip/WinZip
3) Prepared your SD-card (use a 2 or 4GB SD no bigger) and format it by FAT32
4)Take the "RUU_signed.nbh" from it and copy it to SD card.
5) Rename the "RUU_signed.nbh" to "leoimg.nbh"
6) Reset the device while pressing the volume down button
7) Follow the instructions mention on your screen
i've done that. worked so far to flashed my HD2 without errors.
but after i come to home screen my HD2 acts like someone's permanently pressing VOL(-). don't matter what i press or do. i tried a lot of different ROMs, flashing by cable or with SDcard, task29, diff. radio, flash hspl new. all that.
i'm going crazy 'bout that :'(
any idea what i could do?
thanks!
dj_memory said:
i've done that. worked so far to flashed my HD2 without errors.
but after i come to home screen my HD2 acts like someone's permanently pressing VOL(-). don't matter what i press or do. i tried a lot of different ROMs, flashing by cable or with SDcard, task29, diff. radio, flash hspl new. all that.
i'm going crazy 'bout that :'(
any idea what i could do?
thanks!
Click to expand...
Click to collapse
Get start to give us some more device information.
- witch Rom version do you have now?
- Radio version?
- SPL/HSPL version?
i tried to flash the latest official HTC ROM: "HTC_HD2_5CRUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship" to get shure its no ROM problem.
Radio i had on my HD2 was: Radio_Leo_2.15.50.14 witch worked well for the last 3 months!
HSPL is: 2.08HSPL
i also had to say that before that i flashed gingerbread on NAND. working fine (exept battery drain and the default known ROM problems
an there i had also a VOL (-) problem (see http://forum.xda-developers.com/showthread.php?t=906881)
because of that i wanted to change back to WM.
and thats the state know!
i first thought my bad usb-connector causes flash problem (i found 2 bad made conntacts under the microscope), thats why i flashed wia SD now.
dj_memory said:
i tried to flash the latest official HTC ROM: "HTC_HD2_5CRUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship" to get shure its no ROM problem.
Radio i had on my HD2 was: Radio_Leo_2.15.50.14 witch worked well for the last 3 months!
HSPL is: 2.08HSPL
i also had to say that before that i flashed gingerbread on NAND. working fine (exept battery drain and the default known ROM problems
an there i had also a VOL (-) problem (see http://forum.xda-developers.com/showthread.php?t=906881)
because of that i wanted to change back to WM.
and thats the state know!
i first thought my bad usb-connector causes flash problem (i found 2 bad made conntacts under the microscope), thats why i flashed wia SD now.
Click to expand...
Click to collapse
First of all remove your HSPL; HSPL and stock ROM 3.14 isn't compatible and create lot of issues/problems.
allready done (by flashing via SD) ?!
as written here:
http://forum.xda-developers.com/showthread.php?t=623402
for me it looks like WM is missing a sound file or something like that, and thats why it permanetly switch down VOL.
because i get a "file missing" windows for a few ms, but there is no concret file name so i don't now really whats missing
is this possible?
i solved it!
I've got no idea why but its working!
I started the SD update process once more (the third time now
(nothing changed!)
what I've done is i waited after reboot till it locked it selves (screen black)
but i think that made no difference
probleme there again
once more bad news.......tomorrow mornig my HD2 is going crazy again :'(
actual state: my VOL(-) button isn't working.
so i think the real problem was my (know) defect VOL (-) button.
sometimes working sometimes not....
Hi,
After months and months of installing custom ROMs, and I even ran Android for few months, I need to take it to service (I broke the screen).
I have tried (not successfully) to install SPL on it using HSPL3 (info got from here http://forum.xda-developers.com/showthread.php?t=609477). After I have opened HSPL3 and clicked first "Next" button, few seconds later it has generated an error. The phone remained in the 4 color screen showing me the HSPL version I have (SPL-1.42.HSPL XE). From here nothing works (hard reset doesn work, it takes to same screen).
PLEASE help. Nothing I read helped. Phone is unusable now.
Thank you in advance.
PS: I admit I am doing something wrong (since I can not fix it any more)...
[LE: I have copied "RUU_signed.nbh" renamed it, opened Bootloader and I was able to install SPL-1.42.0000. But now I am still stuck in same 4 color screen in the beginning... Hard Reset nor Soft reset do not work.]
Try to star in bootloader mode (vol down + power button), connect usb cable and install HSPL 2.08:
http://forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
Hi,
I did, this is the screen I see (see attached, apologize for the quality).
And also, I need to install stock ROM.
dea.cristi said:
Hi,
I did, this is the screen I see (see attached, apologize for the quality).
And also, I need to install stock ROM.
Click to expand...
Click to collapse
Install stock rom from sd card:
Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
One more info your sd card has to be a normal one (1G or 2G) not HC
and after that reinstall hspl let me know if it was working
Regards,
Me
icsulescu said:
Install stock rom from sd card:
Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
Did that and that is the screen I get. I put a 2GB card, copied the .nbh opened bootloader, and the screen above showed.
Any other thoughts?
Did you downloaded the rigth stock rom???
i had similar error trying to install a wwe on a portuguese HD2...
Then i downloaded the portuguese stock rom and worked.
I hope you can recover it.
See ya...
S_Phoenix said:
Did you downloaded the rigth stock rom???
Click to expand...
Click to collapse
I have bought the phone from Romania and this is the ROM I downloaded:
RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship
dea.cristi said:
Did that and that is the screen I get. I put a 2GB card, copied the .nbh opened bootloader, and the screen above showed.
Any other thoughts?
Click to expand...
Click to collapse
I remember someone here few months back also accidentally flashed SPL which give similar error (Stuck at OSPL which you cant flash HSPL due to unsupported version. Means you are stuck with SPL which was not intended for your region/product code). If im not mistaken, you may need to try and flash various version of stock roms with different bundled SPLs (steps to lower version). Meaning, the goal is to slowly step down towards the supported SPL version so that you can flash HSPL and then finally use the right Stock ROM to get your original (out of the box) SPL.
Anyone, please correct me if im wrong. Good luck mate.
tidus18 said:
I remember someone here few months back also accidentally flashed SPL which give similar error (Stuck at OSPL which you cant flash HSPL due to unsupported version. Means you are stuck with SPL which was not intended for your region/product code). If im not mistaken, you may need to try and flash various version of stock roms with different bundled SPLs (steps to lower version). Meaning, the goal is to slowly step down towards the supported SPL version so that you can flash HSPL and then finally use the right Stock ROM to get your original (out of the box) SPL.
Anyone, please correct me if im wrong. Good luck mate.
Click to expand...
Click to collapse
Yep, it seems this is the problem.
Find the first of the stock roms for the country the phone is locked to and flash it.
But try to flash the complete rom and not only the radio.
Try this older rom:
Code:
http://www.htc.com/ro/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
Or this one:
http://www.4shared.com/file/236870807/d9482029/RUU_Leo_HTC_WWE_EastEurope_166.html
Or go here and flash older radios:
http://forum.xda-developers.com/showthread.php?t=611787&highlight=serial
What you need to do is go to HTC's website, for your area, and try and download ROMs with your phone's serial number. This will ensure that you are only allowed to download a ROM that is allowed on your phone. If you get an invalid message, then you need to try another ROM.
You may have a operator locked phone - you can only flash a O2, Vodafone, T-Mobile, etc ROM.
More ROMS
Just in case you need it, here's an absolutely HUGE collection of original shipped ROMs for the Leo.
http://shipped-roms.com/shipped/Leo/
fred_up said:
What you need to do is go to HTC's website, for your area, and try and download ROMs with your phone's serial number.
Click to expand...
Click to collapse
Wish I could... If I enter the serial and try to download I always get the message "not available".
JWhipple said:
Just in case you need it, here's an absolutely HUGE collection of original shipped ROMs for the Leo.
http://shipped-roms.com/shipped/Leo/
Click to expand...
Click to collapse
Thanks for your replies. However, I was able to fix it... by mistake.
After seeing that nothing works I connected the phone while it was showing that screen (4 colors) and I have flashed the stock ROM mentioned by me in previous posts using the flashing tool inside the package. Even if the main condition was to have it sync-ed, I have tried anyway and it worked (it is not sync-ed unless it boots up first).
Now it is functional again and ready for service.
Happy ending eventually.
thanks for link of roms btw how i now what rom is mine my phone is brand not from some network orange t mobile etc....
gagi75 said:
thanks for link of roms btw how i now what rom is mine my phone is brand not from some network orange t mobile etc....
Click to expand...
Click to collapse
If you don't know from where your device is coming from, with witch operator it is brand; than you can contact HTC.
And share them your S/N thy will be able to communicate you to witch provider your device is branded.
thanks m8 thanks again
unbricked Vibrates 7 times then freeze
so i did this and unbricked my phone but now my phone will Vibrates 7 times and then freeze???? help me plz
Hi, im getting very annoyed with my phone, probably something to do with i don't know what the hell im doing. Basically my phone has lately started to go crazy and constantly reboots, only getting to the orange windows screen. and very rarely boots up. I have the o2 HD2. Ive tried hard reseting..and taking out cards and booting but nothing seems to help. So i spotted the new generic 3.14 rom on the official htc website and downloaded it and thought it would fix it all. But now it wont work, it gets to %100 on the ROM update utility and says '' ERROR 270:UPDATE ERROR - The image file is corrupted, Please check your update utility. Ive downloaded it twice now as it told me as it was corrupt, to download and try again, but its doing the same. Now my hd2 is stuck on the multi colored screen and will NOT boot. Someone please help me, and try to have patience with me as im un-familiar with all this . Someone taking the time to help me would be VERY appreciated. Thanks.
theres a real o2 3.14 rom HERE
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
or you need hspl
Hey Brandon911 after you manage to flash the ROM member samsamuel was kind enough to link for you. If you don't know how to flash the ROM simple put your HD2 in bootloader(tricolor screen) and run the RUU or exe wich ever one it has once you exsrtact/unzip the zipfile. Make sure it says USB in the white bar of bootloader though before you run the updat utility.Anyway once you flash the ROM check your pins that connect to the battery cause I am willing to bet you have been dueing a lot of battery pulls and might have inadvertantly bent one of your pins. I say this cause you said your HD2 was "constantly rebooting".
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Brandon911 said:
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Click to expand...
Click to collapse
I don't see no real reason you should not try a custom ROM. Just make sure and tbis is very important, if the custom ROM has a radio that comes with it, that the radio is compatible with your o2 HD2. I am also sure when samsamuel gets to read this thread again he will be abale to offer more help, probably better than I.
Edit: You will have to have HSPL flashed to your HD2 to flash a custom ROM.
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
hspl4, supports 3.03. If you want to use magldr you will need to go to 2.08.hspl
Brandon911 said:
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
Click to expand...
Click to collapse
Did you use HSPL 3 OR HSPL 4You should use HSPL 4.