Related
Hey All,
I just started working on my phone last night. I installed some 3.xxx radio, and a new ROM that I cooked up. The problem is I did not unlock the phone before I did it, so now I start the phone and it is stuck in a pre-splash screen. Does anyone know where I can get the stock Windows Mobile 6 ROM for it so I can re flash it and then re-cook it? Cause it has OBVIOUS signs that I tweaked it, so it would be hard to explain that it was something "A guy at circuit city" told me to do to get WM6.1. Please help!
Okay I need more specifics. What carrier are you working from?
Stuff
Verizion X6800 went from 2.04 radio to a 3.xxx and wm6 to wm6.1
Just flash your phone with Olipro from microSD card, then u can flash any ROM (exp DCD 3.2.6) also from SD card.
shag1233 said:
Hey All,
I just started working on my phone last night. I installed some 3.xxx radio, and a new ROM that I cooked up. The problem is I did not unlock the phone before I did it, so now I start the phone and it is stuck in a pre-splash screen. Does anyone know where I can get the stock Windows Mobile 6 ROM for it so I can re flash it and then re-cook it? Cause it has OBVIOUS signs that I tweaked it, so it would be hard to explain that it was something "A guy at circuit city" told me to do to get WM6.1. Please help!
Click to expand...
Click to collapse
Make it easy on yourself. Flash a Telus or Sprint ROM over to your phone. THis will fix any booboo's. YOU MUST STOP CARRIER CUSTOMIZATIONS from runing. After this is done, reflash with nueSPL 2.47 like you did and then put on a custom ROM.
This is your easiest option.
If you want the hard route put your phone in bootloader mode and tell me line by line what you see. That will tell us at what state you are in if you really want to try to figure out what you did wrong.
Either way, let us know how it turns out.
Read here for steps:
More info
TITA100 MFG
SPL-2.40.Olipro
CPLD-9
Its still messed up trying the other suggestions. Does anyone know where I can get the original. WM6 rom so I can try again. Or can I unlock it without it so I can load a ROM....also I don't have an SD card.
Thanks for all the help so far
When i went to flash the latest update for the Energy ROM it didn't flash properly to my HD2 and now im getting the red,green,blue and white screen and it says
PB81100 HX-BC
SPL-142.HSPL XE
0X05
CotullaHSPL 0X30
Upgrade ROM code error
please try again
Ive tried reflashing but even though i have it plugged into the USB it wont recognise it, i took out the SD card and SIM card and done a hard resent but then i got some triangular type sign on the phone so took the battery out and put back in, held the button down button and im now back to the screen as like what ive posted about, this has never happened before as any ROM ive flashed has been succesful, ive done a search of the forum and cant come up with anything, can someone be of some assistance here please,cheers.
jonny68 said:
When i went to flash the latest update for the Energy ROM it didn't flash properly to my HD2 and now im getting the red,green,blue and white screen and it says
PB81100 HX-BC
SPL-142.HSPL XE
0X05
CotullaHSPL 0X30
Upgrade ROM code error
please try again
Ive tried reflashing but even though i have it plugged into the USB it wont recognise it, i took out the SD card and SIM card and done a hard resent but then i got some triangular type sign on the phone so took the battery out and put back in, held the button down button and im now back to the screen as like what ive posted about, this has never happened before as any ROM ive flashed has been succesful, ive done a search of the forum and cant come up with anything, can someone be of some assistance here please,cheers.
Click to expand...
Click to collapse
Hello!
Try this:
Full charge your phone's battery.
Download your stock ROM and install it by MicroSD method - it will erease your HSPL, so you will need to install it again.
Install the HSPL again.
Do a TASK29.
Now redownload your custom ROM and reflash it!
Here some helpfull links:
StockROM thread: http://forum.xda-developers.com/showthread.php?t=577717
How to flash custom ROMS: http://forum.xda-developers.com/showthread.php?t=609477
TASK29 thread: http://forum.xda-developers.com/showthread.php?t=644781
It will sove your problems =P
Thanks mate ill give this a go
jonny68 said:
Thanks mate ill give this a go
Click to expand...
Click to collapse
Please tell us if it works, ok?!
help!!!!
hi iv just flashed my hd2 using the sspl and now i cant phone people because of the radio how can i install it without the hspl because it wont let me install that because i havent got spl 1.42.000 or like the guy above he's doing it by the micro sd way how do u do this?? reply asap thanks
joshicole said:
hi iv just flashed my hd2 using the sspl and now i cant phone people because of the radio how can i install it without the hspl because it wont let me install that because i havent got spl 1.42.000 or like the guy above he's doing it by the micro sd way how do u do this?? reply asap thanks
Click to expand...
Click to collapse
Dude, READ my first post!! Here you can find some usefull links!!!
Your case is diferent the OP one, so I sugest you search and post in the right place.
I hope you understand.
Ps: I can't understand your problem with the phone. Try writing it in a better way!
digao100nocao said:
Please tell us if it works, ok?!
Click to expand...
Click to collapse
unfortunately when i go to download the stock ROM i downloaded from the HTC website it stays at 0% and then gives me an error message,tried numerous times but no luck, i was able to download HSPL3 though but that hasn't actually made any difference with regard to actually solving my problem,i done another search and tried numerous things but no luck, just have the multicoloured screen as before, have spent hours now, surely there has to be an easier solution to this as no doubt this has happened to a few people before!
jonny68 said:
unfortunately when i go to download the stock ROM i downloaded from the HTC website it stays at 0% and then gives me an error message,tried numerous times but no luck, i was able to download HSPL3 though but that hasn't actually made any difference with regard to actually solving my problem,i done another search and tried numerous things but no luck, just have the multicoloured screen as before, have spent hours now, surely there has to be an easier solution to this as no doubt this has happened to a few people before!
Click to expand...
Click to collapse
flashed htc stock by sd card? if yes, then its because the stock HTC rom isnt your phones stock, and teh first thing it does when flashing from sd is remove hspl, even though the rom itself fails to flash (because hspl is no longer there)
Boot into bootloader, see what spl says.
If it ends .0000 then use hspl2 to re apply hspl,
re-enter bootloader, connect usb, does 'serial' change to 'USB'?
If yes, try running your rom flash again, but do it over usb. (Can use the htc stock rom for this, for simplicity)
samsamuel said:
flashed htc stock by sd card? if yes, then its because the stock HTC rom isnt your phones stock, and teh first thing it does when flashing from sd is remove hspl, even though the rom itself fails to flash (because hspl is no longer there)
Boot into bootloader, see what spl says.
If it ends .0000 then use hspl2 to re apply hspl,
re-enter bootloader, connect usb, does 'serial' change to 'USB'?
If yes, try running your rom flash again, but do it over usb. (Can use the htc stock rom for this, for simplicity)
Click to expand...
Click to collapse
what do you mean by this mate?
Yeah the spl says spl-2.08.0000 8G XE
when i go to hspl2 to re apply hspl it gives me an error message saying i need to have SPL 142 on my device, this is doing my bleedin head in and ill never mess about with the dog and bone again if i manage to get this sorted after all this it costs too much and im without a phone now until this is sorted, cheers for your assistance mate
jonny68 said:
what do you mean by this mate?
Yeah the spl says spl-2.08.0000 8G XE
when i go to hspl2 to re apply hspl it gives me an error message saying i need to have SPL 142 on my device, this is doing my bleedin head in and ill never mess about with the dog and bone again if i manage to get this sorted after all this it costs too much and im without a phone now until this is sorted, cheers for your assistance mate
Click to expand...
Click to collapse
Mate, try HSPL3. It will work with your SPL (2.08.0000).
It smells like you have a bad flash, maybe your ROM image corrupt in download or in the transfer process.. It does not change the things, to fix it you have to "erease your NAND".
I told you to flash a stock Rom from SD to see if the error stops. If it stops, then you will have to install HSPL again, because it is ereased each time you flash a stock ROM from SDCard.
Then, the TASK29 process is the more important thing, because it will "erease" your NAND and will prepare the NAND blocks for the new flash.
And the CustomROM flash complete the process.
I hope it helps.
EDIT: Fell free only to install HSPL3 (2nd post of this thread http://forum.xda-developers.com/showthread.php?t=611433) and do a TASK29 (this thread http://forum.xda-developers.com/showthread.php?t=644781) before installing again your CustomROM. Those 3 steps are the important ones!
**DO NOT FORGET TO DOWNLOAD YOUR CUSTOMROM AGAIN, BECAUSE IT COULD BE A DOWNLOAD CORRUPTION PROBLEM, OK?
digao100nocao said:
Mate, try HSPL3. It will work with your SPL (2.08.0000).
It smells like you have a bad flash, maybe your ROM image corrupt in download or in the transfer process.. It does not change the things, to fix it you have to "erease your NAND".
I told you to flash a stock Rom from SD to see if the error stops. If it stops, then you will have to install HSPL again, because it is ereased each time you flash a stock ROM from SDCard.
Then, the TASK29 process is the more important thing, because it will "erease" your NAND and will prepare the NAND blocks for the new flash.
And the CustomROM flash complete the process.
I hope it helps.
Click to expand...
Click to collapse
right there has been some developments, HSPL3 has done something an the phoe is now turning on and off, so ill try and download the stock ROM now
if spl says 2.08.0000 then you have chosen teh wrong option in hspl3, you should have chosen 2.08.hspl.
.0000 is stock.
You do not need spl 1.42. to apply hspl, that is old info, hspl2 or hspl3 should work fine.
jonny68 said:
right there has been some developments, HSPL3 has done something an the phoe is now turning on and off, so ill try and download the stock ROM now
Click to expand...
Click to collapse
Man, if your phone is turning on and off it could be the uncharged battery.
Try charging your battery for about 1 hour before trying to reflash - do it with the phone turned off.
Again: Use HSPL2 or 3. Select 2.08.HSPL from the menu. And then TASK29..............
Thanks again guys its getting late so ill just leave the phone charging and get back to it after work tomorrow evening, again thanks for your assistance, still not there yet but hopefully by tomorrow evening the problem will be rectified.
jonny68 said:
Thanks again guys its getting late so ill just leave the phone charging and get back to it after work tomorrow evening, again thanks for your assistance, still not there yet but hopefully by tomorrow evening the problem will be rectified.
Click to expand...
Click to collapse
Relax dude.. You will kick this problems ass tomorrow!!
..........
Sorted!!
At last i have managed to solve the problem, basically i just extracted a stock ROM onto my micro SD card which was in my laptop,put SD card back in phone,went to bootloader, done the task 29, tried to flash Energy ROM 21911 Aug 1st update but having tried several times it was giving me an error message so last throw of the dice as it were i flashed the other Energy build 23569 and it worked, you;ve no idea how relieved i am i kept thining id have to leave the phone into repair which would cost an arm and a leg but thanks to the good people on here in particular digao100nocao and samsamuel and the search function was useful too i have solved the problem and ill ensure i always do a hard reset any time im flashing again as i believe that was what probably caused the ROM not to flash properly the first time (i never bothered doing a hard reset previously)
Virtual beers to everyone much obliged folks and if i can be of asisstance to anyone myself on here i will.
jonny68 said:
At last i have managed to solve the problem, basically i just extracted a stock ROM onto my micro SD card which was in my laptop,put SD card back in phone,went to bootloader, done the task 29, tried to flash Energy ROM 21911 Aug 1st update but having tried several times it was giving me an error message so last throw of the dice as it were i flashed the other Energy build 23569 and it worked, you;ve no idea how relieved i am i kept thining id have to leave the phone into repair which would cost an arm and a leg but thanks to the good people on here in particular digao100nocao and samsamuel and the search function was useful too i have solved the problem and ill ensure i always do a hard reset any time im flashing again as i believe that was what probably caused the ROM not to flash properly the first time (i never bothered doing a hard reset previously)
Virtual beers to everyone much obliged folks and if i can be of asisstance to anyone myself on here i will.
Click to expand...
Click to collapse
Good news my friend!
I'm happy that your problem is solved now.
Have a nice week
Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't. What's happening is that when I boot on it just goes to a blank white screen. I have 2.08.HSPL etc. It usually works after a few battery pulls/soft resets but this time it isn't. I've tried running Task 29's, but they're stuck at 0%.
Everything I try do gets stuck at 0%. Well I've tried running a Stock RUU (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.0 7U_2.05.51.05_2_Ship.exe) and that got stuck at 0% too. I tried downloading my stock ROM off the HTC site but it says "Sorry, this software download is not suitable for your device." Why isn't it? My phones not a TMO HD2? It's a EU Leo bought from o2 Ireland. Can anybody link me to possibly the UK o2 stock ROM?
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
I also flashed Artemis' custom ROM from SD card and that flashed etc. but when I tried to boot I get the white screen.
Any help appreciated, thanks.
Skellyyy said:
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't.
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
Click to expand...
Click to collapse
Sorry to hear your HD2 is not working right now Skellyyy. I am with T-Mobile so I am not familiar with O2 but do they not have an official ROM on their website? Do you have to download your official ROM from HTC? I tried to pull up the o2 website but for some reason it would not let me pull it up. I went to www.o2.co.uk/ and I got this error message.
Error 502 - Bad Request
The server could not resolve your request for uri: http://www.o2.co.uk/
Click to expand...
Click to collapse
The exe is how you run the update utility for that ROM too by the way. Well atleast it is if you are using a computer to flash it. You have to right click on it and click explore to find tbe RUU file.
Also seeing as you have the EU HD2 why not just download the official update from the T-Mobile website and try it?
Yeah no I don't think they do. I looked on there and they hadn't got it. I think TMO have it on there website is because there's is a different phone then to the EU one.
Wouldn't downloading that ROM sort of brick my phone? Or would it not as the EU is compatible with all radio's?
I know the way you run the .exe then the RUU pops up, but HSPL won't flash anything. I've already tried. I know flashing from the SD works as I've flashed an Artemis ROM from it... but still had the screen.
Skellyyy said:
Yeah no I don't think they do. I looked on there and they hadn't got it. I think TMO have it on there website is because there's is a different phone then to the EU one.
Click to expand...
Click to collapse
Good point I have not thought about that. The hole thing about the TMOUS HD2 not being able to flash non TMOUS Radios probably does have something to do with it being there on thier website. This is an effort to keep people from getting confused and downloading the wrong ROM and bricking their phone.
Skellyyy said:
Wouldn't downloading that ROM sort of brick my phone? Or would it not as the EU is compatible with all radio's?
Click to expand...
Click to collapse
No I don't think just downloading the ROM will brick your HD2, you have to flash it for it to even have a chance to brick it ha ha ha ha..........Just kidding I know what you meant, and no I do not think it will brick your pbone cause you have the EU HD2. You might get some preinstalled T-Mobile apps that you can not use but I think this would be the only side effect. But then again I was thinking you could flash it and then try to reflash your regular ROM as I know that the T-Mobile ROM should fix any issue you are haveing with SPL or the ROM. So maybe then you can get HSPL to flash sucessfully.
Skellyyy said:
I know the way you run the .exe then the RUU pops up, but HSPL won't flash anything. I've already tried. I know flashing from the SD works as I've flashed an Artemis ROM from it... but still had the screen.
Click to expand...
Click to collapse
I also know if you flash the T-Mobile ROM via SD card it overwrites all, but I think this is the case with any SD card flash of any official ROM. The Artemis ROM is a custom ROM so if you are haveings SPL incompatibility issues it would not fix this as it would take an official ROM flashed via SD to fix that.
Skellyyy said:
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't. What's happening is that when I boot on it just goes to a blank white screen. I have 2.08.HSPL etc. It usually works after a few battery pulls/soft resets but this time it isn't. I've tried running Task 29's, but they're stuck at 0%.
Everything I try do gets stuck at 0%. Well I've tried running a Stock RUU (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.0 7U_2.05.51.05_2_Ship.exe) and that got stuck at 0% too. I tried downloading my stock ROM off the HTC site but it says "Sorry, this software download is not suitable for your device." Why isn't it? My phones not a TMO HD2? It's a EU Leo bought from o2 Ireland. Can anybody link me to possibly the UK o2 stock ROM?
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
I also flashed Artemis' custom ROM from SD card and that flashed etc. but when I tried to boot I get the white screen.
Any help appreciated, thanks.
Click to expand...
Click to collapse
stuck at 0% usually means hspl is no longer there.
what does it say by 'spl' in bootloader?
If you have tried to flash a stock rom from sd card at all, , hspl will have gone EVEN IF THE FLASH DIDNT APPEAR TO HAPPEN, hspl will still have gone.
Your phone, if from o2, will always only ever take o2 stock roms, unless hspl is there. HTC website will only let you download o2 roms with that serial.
The .exe file the rom comes as is really a zip file, , right click and 'unzip here or extract here', or rename the file from .exe to .zip, , the file ruu_signed.nbh is inside there.
Artemis probably failed because of your radio and/or spl. tell us what it says in spl, and what rom you want to aim for, and we can take it from there.
T-Macgnolia said:
Good point I have not thought about that. The hole thing about the TMOUS HD2 not being able to flash non TMOUS Radios probably does have something to do with it being there on thier website. This is an effort to keep people from getting confused and downloading the wrong ROM and bricking their phone.
No I don't think just downloading the ROM will brick your HD2, you have to flash it for it to even have a chance to brick it ha ha ha ha..........Just kidding I know what you meant, and no I do not think it will brick your pbone cause you have the EU HD2. You might get some preinstalled T-Mobile apps that you can not use but I think this would be the only side effect. But then again I was thinking you could flash it and then try to reflash your regular ROM as I know that the T-Mobile ROM should fix any issue you are haveing with SPL or the ROM. So maybe then you can get HSPL to flash sucessfully.
I also know if you flash the T-Mobile ROM via SD card it overwrites all, but I think this is the case with any SD card flash of any official ROM. The Artemis ROM is a custom ROM so if you are haveings SPL incompatibility issues it would not fix this as it would take an official ROM flashed via SD to fix that.
Click to expand...
Click to collapse
I've downloaded the RUU_Leo_1_5_TMOUS_2.10.531.1_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship .zip
Let's hope it works.
samsamuel said:
stuck at 0% usually means hspl is no longer there.
what does it say by 'spl' in bootloader?
If you have tried to flash a stock rom from sd card at all, , hspl will have gone EVEN IF THE FLASH DIDNT APPEAR TO HAPPEN, hspl will still have gone.
Your phone, if from o2, will always only ever take o2 stock roms, unless hspl is there. HTC website will only let you download o2 roms with that serial.
The .exe file the rom comes as is really a zip file, , right click and 'unzip here or extract here', or rename the file from .exe to .zip, , the file ruu_signed.nbh is inside there. I can't seem to find a way to change it to a .zip or extract it. It's a basic .exe file.
Artemis probably failed because of your radio and/or spl. tell us what it says in spl, and what rom you want to aim for, and we can take it from there.
Click to expand...
Click to collapse
Yeah no, that happened me before and I was only had 2.08.0000 but I'm sure I have 2.08.HSPL now. As I've said, it's happened before, in which all I did was do a soft reset and that worked. Doesn't seem to work now though.
I'm pretty sure MAGLDR is wiped now anyway, as when I plug a USB in while off it doesn't boot up, but just goes to a red LED. Is this normal yeah?
Just tried flashing the ROM I mentioned... the little progress bar showed... then the phone rebooted. Now it's back to SPL.
I don't there's anything I can do now is there? :/
ok, hang on, do you have a tmous, or a regular hd2 from t mobile?
I have a EU Leo. I don't know where it's from as I bought it second hand. The guy said it was bought on o2 Ireland.
Hey SKellyyy not saying I don't beleive you but just do this to confirm you have a DU HD2. I know for positive I have a T-Mobile HD2 as I bought mine brand new from a T-Mobile store. On your HD2 touch Start/Settings/scroll down to About Phone/Hardware Information. This is what mine says.
CPU
Qualcomm (R) 8250B
Speed
1024 MHz
RAM size
576MB
Flash memory size
1024 MB
Data bus
32 bits
Storage size
686.99 MB
Display resolution
480x800
Colors
65536
Bluetooth version
2.1/2.1+EDR
Bluetooth address
38:xx:xx:xx:xx:xx
Compare yours and let us know.
if the send key is white its regular, green its tmous. yours will be regular, from o2.which is why none of those roms you tried worked. only ONLY o2 roms will work unless hspl is there, anmd as soon as you flash any stock rom using sd card, it will remove hspl and then teh flash will fail, but hspl is already gone.
so, to get..
a winmo rom
bootloader - hspl4 - 2.08.hspl (3.03.hspl if you want a 3.14 rom) - bootloader - radio (if needed to update, see the rom thread) - bootloader - flash rom
to prep for nand android
bootloader - hspl4 - 2.08.hspl - bootloader - radio - bootloader - magldr - magldr usb flasher - flash CWM
bootloader -
Lol dude I'm pretty positive as it only has 512MB ROM and it has no T-mo on top and the buttons are white.
I've already tried to flash HSPL again but that was using the second version of the software (can't remember the name) and it failed. It recognized the phone and let me choose 2.08.HSPL but the progress bar just went and went (for over an hour).
Where will I get a stock o2 ROM as the HTC website says "this software isn't available for your device"?
Skellyyy said:
It recognized the phone and let me choose 2.08.HSPL but the progress bar just went and went (for over an hour).
Click to expand...
Click to collapse
thats more likely the comp, not the phone. all usual things, reinstall activesync/wmdc, dont use 64bit os if you can help it, firewalls off, etc etc etc. easiest first test is use a different pc.
It was fine flashing CWM on Friday. Currently can't use a different PC, will get one later and try again.
Thinking if I get this fixed, I'm selling it. Too much sh*t happens with it. It's maybe just my phone but this usually happens everyday and a few battery pulls/soft resets fixes it. That by itself is annoying, but this is even more annoying.
hspl is different than flashing roms / cwm.
flashing and sync will work through any old usb port, rarely need to turn off firewalls, whereas hspl is realllly choosy. gotta be a usb socket directly on the motherboard, hates 64bit win, times out before the phone has rebooted if you start it from winmo running, isnt all that happy if you have changed teh usb drivers for that particular port, say for mtty, or android, (each usb port has its own drivers associated with it, thats why swapping usb ports if it fails is always the first step, try them all)
I've tried three different PC's. Two desktops and one laptop, all plugged in to motherboard USB'a but none of them are installing HSPL. They're all just going up and down on the progress bar. Should I try HSPL4? I'm using the HSPL3 program.
No computers are running 64bit btw.
Is there anywhere I can just get the o2 ROM and try flash it?
Yea go to HTC website, support, pick phone, downloads, change dropdown to rom upgrades, operator name is in the title. You can also find them in the official roms thread in rom development section, and elsewhere in various threads.
Keep gour head up!
Skellyyy said:
Thinking if I get this fixed, I'm selling it. Too much sh*t happens with it. It's maybe just my phone but this usually happens everyday and a few battery pulls/soft resets fixes it. That by itself is annoying, but this is even more annoying.
Click to expand...
Click to collapse
Sorry you are having so much trouble out of your HD2. The HD2 is a great device but they are quirky as hell. I sure you will get it fixed, keep your head up man. Oh and don't give up on the HD2 just yet cause just like King Authur's Excalibure, The HD2 is a thing of legend.
Excilcior
Yeah, I'm currently looking to get a new HD2. Decided.
It's just the bootloader doing my head in, found the official ROM I need, but it'll only flash from PC and it's stuck at 0%. I need it as a .nbh so I can install from SD card. Do you know how I can do that if the RUU I downloaded is a .exe?
If you got RUU in .exe file install WinRar right click on the RUU file and choose "open with WinRar" then extract the .nbh file
I had Magloader and WP7 in it. As time went by I upgraded to HD7 and never looked back. It's been a while since I have touched XDA and WM6.5.
My assumption is that even with Magloader, you only have to flash your stock ROM and it'll revert back to WM.
Mine won't go on and I suspect that I flashed a Non-Tmobile compatible ROM. Can someone confirm that this is the case? Here's the ROM string: RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.0 7U_2.04.50_22_2_Ship.exe
I understand completely that if I messed it up then it's messed up. I just wanna make sure there might be other solutions or something I am missing out.
-Thanks in advance!
----------------------------------
Is this a final answer? I need to know if it's bricked and nothing else can be done.
Anyone thinks a shop may be able to recover it back? It won't go on at all..
tictac0566 said:
Sometimes, it´s easier than you think.
You´ve got 2 options to get rid of HSPL. One of those options would be simply described in the original thread of HSPL.exe software. If you would have checked this program a little bit, you would have noticed the very fact that you can select what SPL or HSPL you want to install.
Second, you can flash your stock ROM via SD card method, this will replace HSLP and everything else - this does not work using RUU.exe via USB.
Click to expand...
Click to collapse
By the looks of the radio installed (2.04.50_22_2), I would say that you did brick your T-mobile phone. Take a look at the following thread for a possible solution to unbrick your phone:
http://forum.xda-developers.com/showthread.php?t=668347
Hi thanks for the response Lavell. Would MTTY be able to do anything?
The phone doesn't turn on at all, or it seems.
I've never bricked one before so Idk if this is the way it happens.
its gone. dead. it will need JTAGging or a new mainboard.
that thread wont help, the phone wont power on, and that thread requires you can get into bootloader.
that's a really early rom you used, the tmous didnt even exist when that rom shipped.
If you want to get rid of it let me know please!!!
Hey guys, don't mean to hijack the thread but I got the same problem here.
Had WP7 but could not use 2g so I went back to MAGLDR113 and installed the file below:
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
It went all the way to 100% but now the phone is dead. Computer makes a sound when I plug in usb but I have tried changing batteries and all but it doesn't work.
Does anyone know in Dallas or areas around how to do that JTAG thing?
There is no proper documentation on how to go back to stock 6.5 Windows or at least I could not find one
S2K_MoZo said:
There is no proper documentation on how to go back to stock 6.5 Windows or at least I could not find one
Click to expand...
Click to collapse
At its most basic, its the same for ALL hd2's, ,
1 get the correct stock rom for your region&vendor
2 flash it
thats it.
Sadly lots of times this is shortened to
1 get stock rom
2 flash it
and people just assume they can use any stock rom, and since they usually already have HSPL installed, it allows the flash to start, and tmous phones die.
Yeh think the HSPL installer should of had a TMOUS version either blocking known bricking radio & ROMs or just an on screen message warrning & advising on checking before comencing with flash.
At end of the day it is the users fault for not researching or using a TMOUS rom to be 100% safer !
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo