I Upgrade my O2 XDA II firm ware from ROM vesion 1.60.50WWE to 1.7.2.00 T-Mobile.
When upgrading to radio about 51% then has got a Error message ID 104 or 144 (I don't remember exacly) and guide include 4 step, summary access bootloader and reinstall.
I have reupgraded but received the same error.
after that I have downgraded the ROM vesion 1.60.50WWE but received the same error too.
Nowaday, My O2 can not start and I cann't doing any thing.
Help me.
Thank.
can you still get the boot loader screen or it's completely dead ?
If you still can, try flashing another ROM but after modifying the country code
Nowaday My O22 have been working, but I only use it with PDA function, no Telephone. Because process upgrade ware not completed. I was access boot loader and try reupgrade ROM with only radio stack many time, but any time upgrade when proccess write radio stack about 50% then Error. Although proccess erase radio no problem. I was try many other version ROM but the same error. If reboot O2, I must wait 20 minute It can working.
If enter Device Information:
ROM version: 1.72.00WWE
ROM date: 03/15/04
Radio version:
Protocol version:
ExtROM version:1.72.04
The boot loader version is 1.01
May have problem with hardware ?
Can have replace Flash ROM- Radio stack?
Thank You.
maybe it can work if you change your boot loader to 1.06
but now I haven't upgrade bootloader any time.
Can you help me how to change bootloader?
Thank!
HI
I AM IN NOW BIG TROUBLE
I HAVE O2 WITH SPLASH ON SCREEN AND HANGS THERE
all i done is upgarde downgrade from version 1.600 /1.66/1.72
all giving same errors
error 114 while erasing radio rom
this is RUUL LOG
9:54:14 Write block133
09:54:19 Update Stage 3 complete
09:54:34 Begin Stage 4
09:55:04 Radio Erase retry 1
09:55:34 Radio Erase retry 2
09:56:04 Radio Erase retry 3
`
THEN ERROR
NEED GUIDANCE
its a nogsm on screen
No GSM
1.72 wwe
thanks
no one has problem before ?
how to do with mmc card
why lauch vwrsion does not communicate with xdaII
i got Xda_II_LaunchROM_v10311
alos Xda_II_Upgrade_v16050
but this two cant communicate
also i put himupgradeUT in same folder but it gives error bed chacksum
i am becoming crazy now
OK.. can u tell me what version you have now? and what version are you trying to upgrade.. lets make this step by step.. i will try my best..
srtange
i had put my phone on charger after two hours
windows start up scrren appeared
also if i allow to reset phone hangs on O2 screen
its work ok now but without gsm
this is information
i got O2 XDAII
ROM VERSION 1.72.00WWE
ROM DATE 03/15/04
RADIO VERSION NOT AVIALABLE
PROTOCOL VERSION NOT AVIABLE
ExTROM VERSION 1.72.181
IDENTITY
Model No. PH10B
Platform: pocket pc
imei: not aviable
i cant flash radio part
my boot loader is 1.03
thanks and regards
Oh My God i dont know how to upgrade the bootloader... i think the problem is your bootloader cuz its not updated.. it sgould be 1.06 and all of that will work fine.. i dont know how to upgrade the bootloeader...
Dear friends,
please help me, since the Radio upgrade keeps failing on my second XDA II unit at 10% (bootloader 1.06)
The RUULog.log files shows this:
*****
14:43:27 Connection with USB
14:44:02 Begin Stage 4
14:44:32 Radio Erase retry 1
14:45:10 Radio Erase retry 2
14:45:30 Stage 4 Complete
14:45:30 Begin Stage 5
14:45:30 Write block1
14:45:42 Write block2
14:45:48 Write block3
14:46:23 Radio Update data retry 1
14:46:30 Write block4
14:46:38 Write block5
14:46:45 Write block6
14:47:21 Radio Update data retry 2
14:47:56 Radio Update data retry 3
*****
It looks to me as if the memory chip isn't working properly.
I tried Radio 1.08, 1.10, 1.17 and 1.18 with exactly the same result.
Now I have no radio at all on my device
I made a backup of my DOC binary partition and it looks just fine.
Don't know what to do next.
Please advise
Sascha
I extracted the radio version 1.20.31.10 from the imate jasjam 1.31.305.2 rom using Asukal's method.
You can find the radio upgrade only and upgrading instructions on the Hermes Extracted Radio ROMs wiki page.
Remember:
- screen will show "Upgrade Radio Stack Please wait........."
- after finishing flashing radio you will see an "Upgrade Error", but the radio ROM will be flashed anyway
- no need to hard reset after upgrading the radio, only soft reset with stylus when upgrade ends.
- upgrade at your own risk, i take no responsiblity for anything that happens to you, your Hermes, your marriage, etc.
This sucks...I followed the directions to the letter and now I'm stuck on the windows mobile screen.
It seems that when it soft-rest, right above the D1.18 (on the bottom center on the screen) NO GSM appears for a few seconds then disappears.
i have exactly the same problem, it just sits at the windows mobile screen.
i am going to do a hard reset to see if that helps
too bad :/ I was just about to upgrade my radio rom with that.. thx for the notice.
Hard-rest doesn't help. I think the issue is NO GSM...the phone doesn't know what to do. And, not being able to activesync, I can't do anything else.
Had the same problem.
Put the device in Boottloader mode (left OK & Power & reset), and loaded Radio 1.16.
Workes !
Probably something went wrong during extracting 1.20 Radio.
oops... sorry guys, i will remove the upgrade inmediately... it worked on my hermes, will try to flash an older rom an try it again! Those who are stuck on windows mobile screen do what torklemm says: flash radio 1.16
That's what I'm trying to do now, I just hope it works.
Thanks.
EDIT: Can't seem to get it to see the phone via activesync. Unable to flash anything at this point.
I am going to give that a try now, will update with the results
Bacco said:
EDIT: Can't seem to get it to see the phone via activesync. Unable to flash anything at this point.
Click to expand...
Click to collapse
You do not need activesync, disable activesync usb connections, put the device in bootloader mode and start the flash utility (ma_upgrade_noid) from 1.16 radio upgrade.
pof said:
You do not need activesync, disable activesync usb connections, put the device in bootloader mode and start the flash utility (ma_upgrade_noid) from 1.16 radio upgrade.
Click to expand...
Click to collapse
Tried that pof, all is get is "checking the info on your device and don't disconnect, etc" and nothing more. A few minutes later it shows the screen detailing the PPC radio and ROM versions and the radio version that I'm trying to install, but everything is blank. I say yes anyway and it just sits on the "checking the info on your device and don't disconnect, etc" screen forever.
That's why I thought something wasn't right w/o activesync. I'll try again.
EDIT, again: I'm now trying the Cingular 1.13 radio...that seems to be installing. Pray for me guys
EDIT 2: Yeah, I get the same error as you shark1
I get an error stating this utility is not design for this device please get the correct update utility
i have the same problem On boot i see "NO GSM". Now my tytn doesn't boot and also when i try to reload 1.16 radio it stucks... I'll try with 1.13...
1.13 don't go it say it's not designed for my device... o__O
now i'll try 1.11 same problem...
I'm uploading a "hopefully" fixed version on ftp (again, it worked on my hermes from 1.16 to 1.20), do not download it yet until I finish uploading... (17% now) i will edit this post and let you know when it is finished.
EDIT: Upload finished!
POF: OK i will wait, hopefully that will work, at present I will try 1.11 as others are trying 1.13
I get the same update error with 1.11
I have try to find my old phone, so I can make calls
Ok, now I'm totally confused. In bootloader, I don't see USB on the bottom anylonger. if I unplug my USB cable, I see serial...but I can't seem to do anything to get USB recognized again.
Why did I do this???
EDIT: Rebooted everything!
Hi all,
got the same problem. Phone in bootloader and can't go back to 1.16 or lower..... hope the new 1.20 will work
rmaat said:
Hi all,
got the same problem. Phone in bootloader and can't go back to 1.16 or lower..... hope the new 1.20 will work
Click to expand...
Click to collapse
i hope to... or i think that our only way is c.a.
pof said:
I'm uploading a "hopefully" fixed version on ftp (again, it worked on my hermes from 1.16 to 1.20), do not download it yet until I finish uploading... (17% now) i will edit this post and let you know when it is finished.
EDIT: Upload finished!
Click to expand...
Click to collapse
pof, please clear the not yet
also this radio have the same problem; not designed for this device... and now?
Guys
I just got my TyTN (unlocked, stock TyTN, HERM200, HT636 series) yesterday. Device info as follows:
ROM version: 1.18.255.3
ROM date: 07/22/06
Radio version: 1.03.03.10
Protocol version: 32.34.7010.01H
ExtROM version: 1.18.255.106
I am on Cingular and in the Washington DC area.
I was trying to flash the Radio only to 1.16 because I am having issues connecting to the Cingular UMTS network, as per the wiki site (http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms). Here's what happened:
a. I ran the upgrade file.
b. The device got into the bootloader mode (tricolor screen) successfully
c. Then the upgrade utility gave me the following error:
ERROR 120: COUNTRY ID ERROR
The ROM image that you are trying to use is not designed to work with your device. Please check the vendor website and download the correct ROM update.
Click Exit to quit
(attached screenshot)
d. I clicked Exit. The device remained in the Bootloader mode (tricolor).
e. I then removed the battery and restarted it.
Thankfully, the device started working properly after starting up.
Any thoughts regarding what's going on? Why was I not able to update my Radio?
I will really appreciate any help in this regards.
JoKer
tried to run the upgrade twice when you get the error? without disconnecting the device from usb...
No pof ... I haven't .. I disconnected it before restarting it. What exactly should I do this time?
gravejoker said:
a. I ran the upgrade file.
b. The device got into the bootloader mode (tricolor screen) successfully
c. Then the upgrade utility gave me the following error: ERROR 120: COUNTRY ID ERROR
d. I clicked Exit. The device remained in the Bootloader mode (tricolor).
e. I then removed the battery and restarted it.
Click to expand...
Click to collapse
Everything ok until "d", don't do "e". Go to "a" again.
I followed all of above steps with my stock TyTN. Fired up the upgrade again after the country ID error, I get the white screen indicating a radio upgrade is being performed. After a while I get the 114 error, I reset the TyTN but the radio is still 1.03. Anything else I need to consider?
check your bootloader version. Radio upgrades can only be done with bootloader 1.04, if you have bootloader 1.06 you don't have the 'rtask' command needed to go to radio bootloader.
pof said:
check your bootloader version. Radio upgrades can only be done with bootloader 1.04, if you have bootloader 1.06 you don't have the 'rtask' command needed to go to radio bootloader.
Click to expand...
Click to collapse
Ok, I have 1.06 bootloader. I was interested in a newer radio ROM to figure out whether my old ROM prevents me from having a simultaneous voice/data connection...
Any suggestions what to do next?
Flash a ROM matching your CID with bootloader 1.04.
Read this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104