On WM2003SE or WM2003, I can use the navigational button to navigate the call history and speed dial function. But after I upgrade to WM2005, those function seems disappear. Does anybody experience that problem and how to get it back those functions. Thank you
XDA II
ROM Version: 1.50f.blWWE
ROM Date: 05/13/2005
Radion Version: 1.18.00
Protocol Version: 1337.38
Yap... I have the same problem! Don´t know why that hapens.
But it´s real bad...
i have the same problem
and it seems that the camera and the record button on the left side of my XDAII does not functioning as well.
but before i upgrade my XDA im sure that i was functioning.
pls help.
Not sure what you are talking about, but on mine, I can still use the Navigational DPAD to browse my Call History and Speed Dial... :wink:
mine is working
thats the some with hardware butons camera and record
people who camera and record butons doesnt work navpad does work also?
al butons in my xda are working as expected .....
I've the camera and record butons working, but navigational DPAD doesn't.
Well, once the phone dialer is runnig, I can't use anymore the DPAD, left or rigth movements to call respectively the "Speed Dial" and "Call History" (very incovinient).
Instad the only way now, is to use the soft buton "menu" or the butons at the dialer.
Off course, once the "Speed Dial" or "Call History" functions are activated, the DPAD can be used again to navigate up/down inside
Fernando
Conchas said:
I've the camera and record butons working, but navigational DPAD doesn't.
Well, once the phone dialer is runnig, I can't use anymore the DPAD, left or rigth movements to call respectively the "Speed Dial" and "Call History" (very incovinient).
Instad the only way now, is to use the soft buton "menu" or the butons at the dialer.
Off course, once the "Speed Dial" or "Call History" functions are activated, the DPAD can be used again to navigate up/down inside
Fernando
Click to expand...
Click to collapse
I still don't get it!
What's so hard about using your thumb to press the respective on-screen buttons instead than the DPad? They're just a couple of centimeters appart? :roll:
.. you would avoid the finger prints on the touchscreen...
and less finger movements required, cause all actions, left, rigth, up, down, would be in the same pad.
Fernando
Good point, but then how do you manage not to get any facial grease on the display while talking? (don't tell me you ALWAYS use a Bluetooth headset!)
Besides, this devices are meant to be used with the stylus or fingers (I know it's a personal choice, but...), just use a decent screen protector and lens cloth to clean it from time to time and you are done.
And if you are so paranoial about finger prints, grease and finger movement, why don't you get a smartphone instead? (that reminds me, don't you ever type SMS or text? 'cause that's one hell of finger movements)
Cheers!
Rayan
Got your point. You're rigth.
But why not to have a simple functionality
- when it is simple to implement
- it was previously available
- and you're already used to it
I can tell you, I used it always this way with WM2003.
That's my point.
Fernando
Okay, I will not argue with that, you are right! ... :?
I mean, I understand that WM5.0 by nature, it's supposed to be more one-hand-friendly so the DPAD is supposed to be used for one hand opperations and that's true in the rest of the interface, so you ask WHY NOT ON THE DIALER?!? :roll:
But I would go even further... WHY THE HELL MICROSOFT DIDN'T FIX THE RECURRENT ALARMS ON WM5.0????? :evil:
But that's another story!!! :lol:
Cheers!
Related
Just put Tombraider on my XDA, absolutely brilliant.
Ive tried it yes brilliant!
...but lacking two buttons...how do you access the
menu to save game or use health packs?
alqwerty said:
Ive tried it yes brilliant!
...but lacking two buttons...how do you access the
menu to save game or use health packs?
Click to expand...
Click to collapse
Can you give me a link where i can find this tombraider, i am a fanatic.
i found the link on google searching for tombraider pda
http://www.tombraidertogo.com
hope it's the right one
Just discovered the lack of buttons, I am going to try the different key controls A B C, have you tried those yet? I was hoping the save/pause button is remapped. Will let you know.
All keys are available
use the contacts and calender buttons and the rec button for the above mentioned functions.
The game is almost a direct port - with the exception of no multiple key presses - so you cant make Lara do that handstand climb manouever.
I am glad that I never played the game originally on the playstation - so I am slowly trying to complete it for the first time.
4 months in and I am only up to level 5!!!!!
Jayman
I remember I installed the game, but I had to take it out, because the only way that I could quit the game was resetting the machine, how do you quit?
Jayman are you using a xda?
I cannot access the menu or quit too.
Nope neither can I, how do you map those buttons to save/pause etc, as the man said, the only way out is a soft reset.
Right:::
I use control config A.
Flip screen left and toggle off both running and walking.
Within the game, all soft buttons(ie those on screen) should work as advertised.
D pad -directs Lara
calender - gets out current weapon.
contacts - fires or actions.
record/volume button - accesses menu.
In the menu u can go up and down 3 levels
Inventory - here are your weapons medipaks compass, press the soft select to use a medipak (Lara will groan) or to change weapon.
Above that is Items where you keep anything you have found.
The bottom screen is the options where if you select 'game' you have the option to load or save a game. You can also exit to the title screen.
Then from the title screen you use the same option to exit back to TODAY.
I have also found that if i press one of the phone buttons - it exits imediately without the need for a soft or hard reset and when you restart the game providing you have not hard or soft reset, you are exactly where you left the game.
Hope this all makes sense and is of help to you. If this does not work for you it may be the OS you are running or some software that is providing a conflict. This all worked on original OS and SE1.2 but I have not upgraded to WM2003 yet. If you have any other software that has the rec/volume button mapped - this may be the conflict to prevent you getting to the menus.
Good luck and Good Raiding.
Jayman.
(PS - I never enjoyed single player games on console or PC - always prefered to beat someone in the room - but it is great on a mobile platform when caught out with time to kill - yet would not carry a handheld - so this game is a godsend hence earlier post - MORE PLEASE)
Thanks Jayman.
The copy I am testing is probably a demo :wink:
guys a bit tarded :|
D pad -directs Lara
calender - gets out current weapon.
contacts - fires or actions.
record/volume button - accesses menu.
no way u can remap the volume button on a XDA!!!!! simple
gazzaman2k said:
guys a bit tarded :|
no way u can remap the volume button on a XDA!!!!! simple
Click to expand...
Click to collapse
Not quite accurate.
I haven't tried the Volume button on Tomb Raider specifically, but there are plenty of games that allows you to use the volume button.
Between the ones I can remember are:
Motocross Stunt Racing, Morphgear emulator, Darxide EMP, etc.
i got the full version of tombraider and i could never get the medipk and options up to exit i had to soft reset :\ even when i remaped buttons it dont work for volume :|
Well pressing volume or any of the phone buttons does nothing.
Jayman, are you using an XDA, the phone buttons on mine do zilch, I cannot quit or get a menu once I have started a game.
Yeah I am using the XDA.
I did nothing special when I loaded it on so I can not see how yours would be different - unless you have mapped the buttons in another application that could be affecting it?
Try reinstalling and make sure all apps are closed right down before booting. Also - shouldn't make a difference - but i usually turn the phone off before playing games.
Jayman.
I have spent ages with this, without success, there is no menu at the foot of the screen, just have left/right arrows bottom right, and the movement icons, the volume key does nothing, neither of the phone keys red/green does anything.
i told you it didnt work but no one listened :| only way to exit is soft reset
gaz
i wonder why... i have an emulator, that emulates an old computer of mine, (colecovision ADAM), and IT allows me to map all 5 buttons to play the ADAM roms. hmmm
im sure its just a programing glitch.
i installed the game, great graphics.. but its too sufisticated for me
i like arcade cames, like TURJAH II, SIBERIAN STRIKE X and such.
For all of those who are now running SE thanks to dcs and others. Just download this little app, unzip it, run setup when connected via activesync and then add it to your start menu. Works like a charm and saves having to hard map a button to rotate your screen we are already limited to buttons as it is. I just put it at the top of my start menu and can use from any application of course. Thank you guys for all of your hard work.
not bad at all. but what i did was use phm plus; it gives you the short cut icons to the items in the settings folder (like bt, clock, input, etc). in this case i copied the "screen" shortcut and had it appear in the today screen using tdlaunch. just click on the icon and the option for landscape or portrait comes up.
cheers
thanks .. that was a very nice utility ..
Cool, another way is to assign it a hardware button, very easy t flip on the fly.
RE
Hi ZeroXtreme!
If you'll to assign the RotateSE to a hardware button its slower than the default Rotate Screen because of the rotating circle.
I think creating a shotcut on the Today screen launcher program is still a better choice and it can also relieves one of the hardware buttons for other use.
Thnx
Works as intended...
thats weird :? ...
does'nt WM2003SE has a <Rotate Screen> at "Assign a program:" list in Buttons section ?! :?:
in my i-mate JAM i can rotate the screen between 'Portrait' and 'Landscape(right-handed)' by pressing "Record" button
i wonder if xda2 wm2003se has it or not, coz mine gone junk while i'm upgrading to chines rom SE
later 8)
@NightmarE
Yes, it does have the hardware button assignment, the problem is that most of us have already used all the hardware buttons for other tasks, so a Start menu option is a nice solution...
I agree I have upgraded to the blue angel but having it in the start menu is much better than hardmapping it to a button, I posted the app for those who want a different option, if you want to waste a button on just rotation then be my guest but some of like myself don't use screen rotation that often then it is better in the start menu and not on a button that I need, considering I use alot of apps like Microsoft Voice Command.
It os better to have it in the Start Menu than in a Today Screen, if you are in the middle of a app it is easier to just open the Start Menu and rotate than go through settings->screen or close then today then back to the app...
I'm using SPB Pocket Plus and add "rotate screen to the right" to close/minimize dialog ... That's just how I do it. Free Up start menu slot for my other frequently used apps.
Right now I'm quite a happy XDA2 user
use PHM utility to add a shortcut of RotatSE in Task bar near by bluetooth icon it will be like i-mate Jam icon 8) ...
laters :lol:
I assinged one hardware button to flip the screenand made the flipting system easily and fast...
Works great on the Treo 700wx. Thanks!
Hi, is ROM version 1.66.00WWE a wm2003SE?
Just tried the software a while ago but it didn't work.
Is there a version of this working on wm2003? just found out that my phone is not wm2003SE version but a wm2003, software not compatible with wm2003. :c
Works ok, but...
Hi.
It works fine, but how I configure it to rotate to the other side (clockwise) ??
Thanks in advance,
Joe
First, the important stuff:
Download Link:
http://www.mr2-power.com/downloads/DeviceLock.CAB
Here is the old thread discussing the app from the time I first released it:
http://forum.xda-developers.com/showthread.php?t=261277
I have released a new version of my Device Lock application. There is one primary enhancement in this version, but it is one many people have asked for.
Upon installing the new version you will notice a two new options in the Device Lock control panel applet. First is "Easy Unlock". What this option does is allow you to unlock the device with a single click of the left menu button (the button directly under the Unlock menu that appears when the device is locked) and not need to touch the button on the screen or type "*" on your keyboard. The second option enables a vibrate alert when the device is unlocked using this method. This is to avoid having the phone unlock in your pocket (fairly unlikely) and not notice it.
If you want the least number of button presses to unlock you can always select the "Do not lock buttons" option in the Lock tab of the Buttons control panel applet (same place you assign programs to different buttons). This means that even if your device is suspended you can simply press the left menu button to unlock the device. One click, easy, but also prone to accidental unlocking (so you should probably use the vibrate option).
The safest (and my preferred) method) is to select the "Lock all buttons except Power button" or "Lock buttons if device is locked" option. Then, if your device is suspended (mine usually is when in my pocket) you have to first press the power button, then the left menu button to unlock. Still only two button presses and easily done without looking at the device. If the device is not suspended.
Everything else is the same as it always was.
Enjoy!
-Matt Armstrong
Terrific, almost perfect. It miss an important feature for me: turning off display after lock, which is important for listening music.
Good job.
Updated: Found the option "blank screen" is what I want. Shouldn't it be "black screen"? My understanding of "blank screen" is unlock to today screen.
Perfect now.
Hey Matt! First, thank you very much for this great software and for the improvements. Also a special thank you for sending me an email that my request has been heard
Still, I have problems on my Hermes using your new "Easy unlock feature". I assigned DeviceLock to the left SoftButton in my TodayScreen. When I press it it locks the device and for unlocking, I have to repress the left soft button. When repressing, I still have to touch the screen and it also doesn't vibrate.
Could it be that it's because of me using WM6? Do you have WM6 installed on your device? Can anyone confirm it with a Hermes running WM6?
Dandie said:
Hey Matt! First, thank you very much for this great software and for the improvements. Also a special thank you for sending me an email that my request has been heard
Still, I have problems on my Hermes using your new "Easy unlock feature". I assigned DeviceLock to the left SoftButton in my TodayScreen. When I press it it locks the device and for unlocking, I have to repress the left soft button. When repressing, I still have to touch the screen and it also doesn't vibrate.
Could it be that it's because of me using WM6? Do you have WM6 installed on your device? Can anyone confirm it with a Hermes running WM6?
Click to expand...
Click to collapse
No, I do not have WM6 on my Wizard and the software has never been tested (by me) on WM6. The issue could be that you are mapping the lock software to the same button required to unlock it.
Here's a simple test, when you press the left SoftButton to unlock the device, does a dialog pop up with a title of Unlock? If so, does the dialog say that you can press the button on the screen or type "*"?
-Matt
nice release! thank you a lot!
Thank you very much.
Very nice program... simple, and it works.
armstrom said:
Here's a simple test, when you press the left SoftButton to unlock the device, does a dialog pop up with a title of Unlock? If so, does the dialog say that you can press the button on the screen or type "*"?
Click to expand...
Click to collapse
Yes, that's what it does - as it was always doing before . I hope this issue can easily be resolved. Maybe you're using some functions that are different for WM6.
Dandie said:
Yes, that's what it does - as it was always doing before . I hope this issue can easily be resolved. Maybe you're using some functions that are different for WM6.
Click to expand...
Click to collapse
Crossbow can't be the reason for the problem.
App works w/o any problem on both my HTC devices.
Cheers
hrb
hrb said:
Crossbow can't be the reason for the problem.
App works w/o any problem on both my HTC devices.
Cheers
hrb
Click to expand...
Click to collapse
Also with the EasyUnlock feature? No additional touchscreen press necessary?
Someone else who has it assigned to the left Soft Button for activation and working EasyUnlock?
There are still a small issue left. When the devicelock is activated and display is off (with blank screen option), only pressing the left or right soft keys can turn on the display. Even worse, pressing the softkeys will trigger the commands of softkeys before the unlock windows shows up. For example, in today, pressing the left softkeys will run email.exe in my treo 750v before " unlock " shows up, which is very annoying.
When can't it just lock/unlock without any extra effect?
This is probably a problem with the microsoft lock mechanism. I'm using the method described in the MSDN to turn off the screen, so I'm not sure how I can do it differently. I can search for an alternative method to blank the screen, but I don't have much hope of finding one. I did not write the locking mechanism itself so I have no control over the way it locks/unlocks. All I'm doing is automating the process that is built into the OS. So I cannot fix bugs in the lock itself. Even the Easy Unlock solution is simply an automation. The solution turned out to be very simple, I simply keep the device lock application resident in memory after locking the device. It continually searches for a window with the title "Unlock" and then simulates pressing the * key... That's it. After sending the keypress it vibrates (if enabled) then terminates. So the application is only resident in memory while the phone is locked.
And I'm not sure what you mean by lock/unlock without any extra effect. The only "effect" I add is the vibrate on unlock, which is optional.
-Matt
armstrom said:
This is probably a problem with the microsoft lock mechanism. I'm using the method described in the MSDN to turn off the screen, so I'm not sure how I can do it differently. I can search for an alternative method to blank the screen, but I don't have much hope of finding one. I did not write the locking mechanism itself so I have no control over the way it locks/unlocks. All I'm doing is automating the process that is built into the OS. So I cannot fix bugs in the lock itself. Even the Easy Unlock solution is simply an automation. The solution turned out to be very simple, I simply keep the device lock application resident in memory after locking the device. It continually searches for a window with the title "Unlock" and then simulates pressing the * key... That's it. After sending the keypress it vibrates (if enabled) then terminates. So the application is only resident in memory while the phone is locked.
And I'm not sure what you mean by lock/unlock without any extra effect. The only "effect" I add is the vibrate on unlock, which is optional.
-Matt
Click to expand...
Click to collapse
Sorry, Matt, I didn't make me clear. As to the extra effect, I mean the side effect of triggering commands before unlocking. Since it also happens to other lock program, I guess i have to settle with it.
Well, this may be a problem specific to the Treo. I tried the scenario you describe on my Wizard and had no problem. I changed myoption to "blank screen" and the device unlocks just fine for me when I press the left app button. However, the difference with my phone is that the only way to turn the screen back on is to press the power button (just like waking it up from being suspended). Unfortuantely, I doubt there is anything I can do to solve your problem, I'm sorry.
Edit: Just to clarify something, are you pressing the left app button (the one with the mail icon on it) or are you pressing the left menu button? I may have made a mistake in my initial post Basically, you need to press the button that is directly below the menu item that says Unlock.
-Matt
Hi, this device lock works fine on my orbit.
One small issue as previously stated with the left soft key.
I use wm5 new menu.
With first press new menu pops up
Second press, bye bye new menu
Third press unlock and vibrate
Thanks for the app, I was already using the previous release and this is now more convenient for me.
Great update!
On the easy unlock, could you make the vibrate much shorter?
I have SPB shell and get the "now screen" on wake up
It would be nice to have the unlock app the way it is right now but separate so that I could map it out on the "now screen"
Thanks
I mean left softkey ( the key corresponding to the two big buttons on bottom). In treo 750, once devicelock is activated, only the softkeys (left or right) can turn on the screen (same in vjdevicelock), all hardware buttons and keyboard keys are locked.
Maybe it is not related to treo. You see, both uniqueboy and Kikouyou has the same problem as me.
oh my, please port this to smartphone!
GREAT !
An absolutely superduper great and VERY useful little app !
Specially using the "Lock all buttons except Power button" approach
Cheers hrb
hi
was checking out Slide2Unlock just now and I actually set it to be launched by DeviceLock (launch program when device is lock feature) and the result is not desirable. there's some 'violation' error.. = ( anyway of overcoming this?
think it will be cool to have the phone auto lock when it's off and launch 'Slide2Unlock' when it's awake!! = )
Flashed to WM6.5 in an apparently futile quest to resolve my wifi connectivity issues. Now I'm trying to get used to the new UI. It's fine, but I'm missing one feature on the phone: It used to be that within the Phone application, hitting up on the D-pad would bring up Speed Dial, then you could hit the D-pad up or down to get to the number you want, and then hit the middle of the D-pad to dial. Made for nice eyes-free dialing. How do I replicate that feature?
iconsoft phonex has an even quicker option of favorites
it also has a fairly simple speed dial using the pad
comes with a today plugin w/ row of quick opening buttons:
favorites, messaging, phone pad, comm manager, ring/vibe selector
favs, comm & selector all slide open right on the today screen
making calls to my favorites has never been quicker or easier
http://forum.xda-developers.com/showthread.php?t=506221
this is the favorite people app for win 6.5 and you can use the dpad for dialing
Thanks for your replies. What I'm looking for is fast, eyes-free dialing. Under WM5 and WM6, I used a program called Smartskey. It remapped the function of the d-pad within the default Phone application, so that hitting Up brought up your speed dials and Down brought up the call history. I found my old copy of smartskey 0.6 archived on my PC and installed it on my new WM6.5, but it appears that those d-pad remappings aren't working.
I downloaded and installed the demo for phonex. It's quite nice, thanks for the tip. Unfortunately, the today shortcuts aren't as useful under Titanium, which is what I'm trying to run.
I may resort to that Favorite People app, but if possible I'd rather find a way to replicate the old smartskey functionality -- habits are hard to break.
Hi Everyone
Sorry if this has been asked before (can't find on searches)
Orange have just replaced my broken HD with a TG01 and I am trying to get MSVC 1.6 installed. Trouble is I can't find any way to remap a hardware button
Any help will be appreciated
Regards
CD (UK)
I know the registry to map the camera key but after reset the changed reg value resets back to default . If you're interested in experimenting further in that i can tell you, other than that i don't know how to map other keys, sorry.
Hi Chromedome, I have tried MSVC but it does not activate when I press the talk button on my BT headset.
Does MSVC work on your TG01 via BT headset?
dr_strangetrick said:
Hi Chromedome, I have tried MSVC but it does not activate when I press the talk button on my BT headset.
Does MSVC work on your TG01 via BT headset?
Click to expand...
Click to collapse
No, I have an integrated BT in the car so never use a headset, sorry
Always used MSVC for years just for general dialling rather than searching through all my contacts but can't find how map a button
I really have mixed feelings about this TG01: Nice big screen but find it 'tinny' and unstable. Have to re-boot to un-freeze it often. Poor call quality.
Has the potential to be a really good phone
CD
Maybe a prg called AE Button plus is what you need..I don´t use it myself so can´t tell much
AE Button Plus
This is single-handedly the greatest program I have on my TG01, common .... think about it ... what is the one problem that we all have with out TG01's? ... well.. how about this.. it only has 6 buttons, and all of them are very necessary. Can you remap your power button? Well the power button is kinda important.. isn't it? How about the volume up and down button? No... those are kinda important too.. ahhh how about the camera button.. I don't need a friekin' camera anyways(being sarcastic here).. the thing is is that we can't remap anything... unless you install AE Button Plus.
but....... You can remap each key (haven't tried the power button ehheeh) including the softkeys "home" and the button that looks like "<-", here is the nifty thing, you can remap them to respond to 1, 2, or 3 clicks, or long press, so each button can now have at least 2-3 items mapped to them. You can setup an audio record and audio stop button with Resco Audio Recorder all mapped to your camera key and still have your camera key work as normal, so essential your camera key has 4 keys mapped to it. If you hold it down for a long press then it will bring up the camera, then a short press will take a photo, if you press it two times then it will start recording in Resco Audio Recorder, and if you hit it three times then it will stop. This is how I setup mine. I also mapped the "<-" softkey button so that a double click will bring up the SPB Mobile Shell Task Manager. I mean, it is the greatest thing ever. Also, I bought it yesterday through handago for only 5.99 dollars cuz I have a 25% off coupon. Then when you buy it, the annoying 5 start-up splash screen doesn't appear at boot time from your device. Here is the info.
http://ae.inc.ru/aebplus.php - developers website, after you buy the item then you want to go back here and download the latest version v2.6.6.2, also, you have to activate it through the website using the registration code that you received from Handango.
http://www.handango.com/catalog/Pro...&deviceId=2180&platformId=30&productId=182670 - Buy the item here, you can get 25 percent off of the purchase price by using the coupon "GAMES25", I know it is not a game, but it worked for me ehheehhe. The version that is downloaded from Handango is version v2.6.5. I have been using the "GAMES25" coupon for about 6 months now eheheh, I think they forgot to expire this coupon ehehhe.
Seriously pplz, try the trial, this is the best 5 bucks I have ever spent on software, is the absolute proverbial icing on cake, such a nice finishing touch to my TG01. All in all, this program adds more than 20 new buttons to our devices. Seriously, also I just thought of something you know how you added the little joystick functionality to your usb port (http://www.fpsece.net/forum2/viewtopic.php?f=13&t=423&start=0), now you can program those joystick buttons to do additional things too heheh, this program for me has truly completed my phone.
Now if someone can help me with my non-mounting SD card problem I would much appreciate that!!! hehehehee.... hope this helps someone.
-Kili.
PS: When mapping the softkeys, for some reason you have to go from right to left, so map the "<-" key first, then the zoom bar then the home key or something like that, but there is an order to it, just a weird quark and also, there are issues, in particular the newest versions of TouchFlo3D that block some buttons so AE Button Plus is unable to intercept and process them. One definitely needs to test AE Button Plus and see if it will work as you before purchasing. EHHEEHH This is my disclaimer section!
chromedome said:
No, I have an integrated BT in the car so never use a headset, sorry
Always used MSVC for years just for general dialling rather than searching through all my contacts but can't find how map a button
I really have mixed feelings about this TG01: Nice big screen but find it 'tinny' and unstable. Have to re-boot to un-freeze it often. Poor call quality.
Has the potential to be a really good phone
CD
Click to expand...
Click to collapse
Don't give up on it yet. Many including myself thought that way at first, but when ppl started cooking new roms things got much better. Now i can boldly say that i dont regret buying this phone, especially at such a bargain price. Try the 6.1 rom from here (ffboy must get all the credit for it), read about how to flash a new rom here (SDDL+ Method) and in a few minutes you will have a totaly new phone!! Sound is very very clear (no more comlaints about not being heard etc.), no gps connection problem, free boot ram higher than ever and battery life at it's best.
Good luck! Phone is great, give it another chance!
plus AE Button Plus....
Kilihari said:
AE Button Plus
This is single-handedly the greatest program I have on my TG01, common .... think about it ...
Click to expand...
Click to collapse
Absolutely agree!
I've been using this program for ages.It's a pity that TG01 has so few hardware buttons:
Anyway: My settings:
volume up for:
1 Single press: Press PageDn (very useful reading)
2 Double press: Ok/Close
3 Triple press: Switch Display Off/On
Volume down for
1 Single press: Resco Audio Recorder -rec (This device don't have REC button.....)
2 Double press: Resco Audio Recorder -exit
3 Triple press: Switch Display Off/On
I'm also using the useless zoom bar to change apps (Like ALT+TAB)
How to?:
Tap Left softkey: File
Add button
Add Key (Touch the zoom bar: The program detects Key code 405C as Win Key)
Tap Add Key
You'll have a new button called Button #405C
Tap & Hold over the new line (Button #405C) and assign Alt+Tab to it
The program ask to self reset, say Yes and .... here you are!
Enjoy!
Thank you Thank you Thank you
Thanks Guys
Flashed with Noksers ROM & SPB
Will try AE Button plus - looks like it will be the DB's (had something similar on my HD (Mobile Magic)
Once again thanks for all your help
CD (UK)
chromedome said:
Thanks Guys
Flashed with Noksers ROM & SPB
Will try AE Button plus - looks like it will be the DB's (had something similar on my HD (Mobile Magic)
Once again thanks for all your help
CD (UK)
Click to expand...
Click to collapse
Nice to hear you found interest in your phone again
chromedome said:
Thanks Guys
Flashed with Noksers ROM & SPB
Will try AE Button plus - looks like it will be the DB's (had something similar on my HD (Mobile Magic)
Once again thanks for all your help
CD (UK)
Click to expand...
Click to collapse
Also playing with MSVC and my TG01...
If you want a simple free alternative, you can use HButton 2.3 to remap camera button.
From message #6:
Kilihari said:
This is single-handedly the greatest program I have on my TG01 ... AE Button Plus. You can remap each key ... $8 ...
Click to expand...
Click to collapse
If anyone (except me) is still interested - now free.
http://ae.inc.ru/aebplus.php
pol098 said:
From message #6:
If anyone (except me) is still interested - now free.
http://ae.inc.ru/aebplus.php
Click to expand...
Click to collapse
Many thanks for flagging
Yes just now happened to be of particular interest, although I had a paid version long ago !
Regards,
Kevin