i need your help
it's seems to me , that , activesyc 4 dissconnect during upgrade, oh, i forgot to say , the patch didn't work as well, i am getting msg. sorry this patch can't patch or somehting like that
any help
my device is pda2k ,
my pc is windows xp sp2 , dell laptop,
I'm sorry to inform you that this release of Windows Mobile 5.0 works ONLY on Himalaya devices (i.e. MDAII, XDA2, QTek2020, etc).
Your's is a Blue Angel device.
Sorry!
Rayan
same problem
I try to upgarde yesterday, but get the same problem ; can't patch , can't connect to act sync 4.
thank you Ryan for your reply
but , this is really bad from microsoft, why not blue angle?
why ,
is there any update soon
hi
for it to not give error.. you need to have the power plugged in to the sync cradle for the upgrade..
Related
RUU upgrade didn´t finish after 8 hours.
I think it never started, because all what I could see is word USB in the top of the dispaly after the scren that showed my old ROM versions and the new ones, and I accepted the Start upgrade.
After retrying RUU as suggested in several posts, I get ERROR 101. Connection error. Check cables, power, ....
It seems that bootloader is missing, as I can not get into it (only words Serial/USB on top and v 1.01 at bottom of the screen).
Do I have any solution. (I bougth it in Hong Kong THREE days ago!!), and I am live in Spain.
Can anybody tell me what is the machine waiting for when shows Serial/USB screen ??
What can I further do ?
Problem solved !!
It seems that the problem was in mi portable (Windows 98 Second edition).
After starting upgrade again with a Windows 2000 machine all worked perfectly.
Is it documented any problem upgrading with Windows 98 SE ??
well 98SE is a pretty old os which usb support is not as good as later os's
also dident ms stop supporting it altogther ?
they wanted to anyway not sure if they desided to support it anyway
Re: Problem solved !!
vcp said:
It seems that the problem was in mi portable (Windows 98 Second edition).
After starting upgrade again with a Windows 2000 machine all worked perfectly.
Is it documented any problem upgrading with Windows 98 SE ??
Click to expand...
Click to collapse
Upgrades are only supported in Windows 2000 and XP.
Grtz,
Jos
Ok that upgrade is only supported under W2K or XP,
BUT
it didn´t mentioned it in the presentation scren
AND
it starded ERASING my flash.
I think that an OS check can be performed and this problem can be easily corrected.
You can imagine how i felt during the three days that I have my XDA dead.
it's windows...
what did you expect...
I have the tmobile pocket pc 2003 but when i connect it to my pc it doesn't detect it... i don't know wat to do... i need it to connect so i can unlock it.. well any advice will help....
how do you plan to unlock it through the PC ??
It's enough to copy xdaunlock.exe to your device and run it ... unless you have RSU 6.2x whicj will require you to down grade it first.
i don't know wat to do
i lost the cd's dat came with my tmobile pocket pc and i need to put the special edition rom... but i have the activesync software and outlook but it still won't connect through activesync... wat am i supposed to do? i can't just use the unlocker program b/c it's rom version 4.01.16 ENG... please help...
Re: i don't know wat to do
Try downloading the newest version of Active Sync (3.7.1). Than synchronizing should work with your Device....
HTH
Stefan
please help
i do have the newest version of active sync... and during the setup when it tries to detect my pocket pc it says dat there is nothing connected... i don't know wats wrong.. it works on my friends computer...
is it 98 or ME ?
their usb were always somewhat waco
it's ME and it was working on a XP but my laptop that had XP is not working so i can't use it.. i wasn't able to unlock it with my other laptop before it broke so can anyone tell me if i can fix the usb problem or if it's a different problem?
maybe windows update or some driver update from the laptop makers site
i couldn't find any driver updates for the sony vaio notebook PCG-FX200 series does any one know where i can find some?
hello,
if your computer doen't recognize your pocket pc device for some reason, you can go to control panel select user accounts and create a new user. Then restart your computer with new user name. Try and let me know if it solve your problem.
Hello,
I tried to upgrade my SPV M1000 to WM5. I followed the procedure and ran the device in bootloader mode. I put the device on the cradle and it displayed USB and V1.06. Ok sounded good.
I started then the HimaUpgradeUt.exe program on the PC. The problem is HimaUpgradeUt.exe didn't find the mobile device at all. After maybe 1 minute looking to it displayed an error 101 message.
I tried different things : install ActiveSync 3.8, 4.2, 4.5 (no change)
I tried to connect the device with mty and it worked !
I tried to run HimaUpgradeUt.exe with the SPV running WM2003 and it found the device. I didn't try to upgrade in this mode anyway.
Any help is very welcome.
is your machine with win vista also?
as you said that you tryed to install ActiveSync 3.8, 4.2, 4.5, guess its WinXP. if its 2000/WinXP/win2003 then use only 4.2 version of ActiveSync. don't know why but i can only have sucess with that version. check for any security software that may block COM. with ActiveSync-Pocketpc.
that HimaUpgradeUt.exe you use is for your model? as im not an expert on this matter, don't know if your precise phone is a himalaya, maybe thats the prob. ehehhe then maybe not as im not aware of all the brands this peace of tech can became!
do right click on my computer and select manage, goto device manager and see for a mobile entry there, while your pocket is connected in serial/usb boot mode. there must be a windows ce device there for this to happen, and you should, not a must, but try to shut activesynch down while doing this detection with HimaUpgradeUt
Yes I'm running Windows XP Pro SP2. I installed activesync 4.2 again and disabled the firewall. I can see windows detecting the device when I put it on the cradle. But there is still the 101 error message when I try to run the update.
Vista and upgrade
Firstly thanks to marcjero for guiding me to this thread...
secondly... I had no probs at all, syncing my device with vista's WMDC(Windows mobile device center), apparently I tried to flash my device... and yes its an i-mate XDA II, currently running on C_ShekharAKU3.5.R40.P24_public_ROM and want to update to the latest one... apparently, connected my device to my system in bootloader mode... and well since then my system has a prob detecting my device... and I cannot even sync now... when i try to run HimaUpgrade, get the same 101 error code... :-(
any ideas how to get this thing working again?
PS: its seriously frustrating for me
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
syncing not working either...
xda2jojo said:
you cannot flash the device except in winxp...
jojo
Click to expand...
Click to collapse
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
xda2jojo said:
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
Click to expand...
Click to collapse
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
daWidoW said:
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
Click to expand...
Click to collapse
marcjero said:
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
Click to expand...
Click to collapse
what OS you are using while flashing and synching? xp? vista?
I'm running XP SP2
About Vista...
Read this thread
Could worth to try.
I tried to flash using my work laptop and it's working now
44% processed, finger are crossed...
hey every body i have an prophet and its cant connect on the pc using activsync 4.5 or 4.2 also 4.1?? cuz i wanna to make an upgrade but (usb not rycognized) is appear every time i connect it so i cant cuz of this problem.
any one help me plz i need help so much
HI.
When I bought my Prophet (2nd hand) it was as a sh*t....and I decided to change / upgrade the ROM. After this it was impossible to connect to activesync and.......tachan!!! it was the usb cable!!! there are some usb cables unable to connect some devices (as my bluetooth GPS) and I changed the cable....all perfect!
Maybe is this your problem. If it is not the answer maybe you can try to change the ROM and try and try....
I hope it will help you.
Hello all =)
(Happy New Year)
-= Some thing happen'd to my Sync with my phone to -> Windows 7
i didnt Sync it some time now..
couse i have a new job where i work on secret army electronic circuits
so they dont allow to come with a phone that has a camera =)
so i didnt use my HTC HD2 for a month now =)
I noticed a new ROM wanna try it.
BUT >!< when i plug my phone to the USB ( to the back of my comp ) click on ActiveSync ... And nothing happens
-= did almost every thing i could ... restarted deleted the soft on the windows 7 ( with PErfect Uninstaller ) installed it again / Restarted my comp
Noting =(
Any one ? PLZ .... SOS =)
Try Windows Mobile Device Centre instead of ActiveSync.
No no )))
Sorry i didnt ex. this as well - = - i click on my Device ( htc hd2 ) the " activesync "
what i have on my pc ( windows 7 ) Device Center v6.1
and still ... no response when i try to sync....
( i searched the web little bit, some say they have the same problem but with Evo, seens 1-st of Junuary 2011, sounds not real .. but still )
You don't need to manually run ActiveSync on your phone, it should start automatically when succesfully connected to your computer.
Silly question, but do you get a new external hard drive when you plug in your phone to the computer?
Does WMDC show your phone connected?
fred_up said:
You don't need to manually run ActiveSync on your phone, it should start automatically when succesfully connected to your computer.
Silly question, but do you get a new external hard drive when you plug in your phone to the computer?
Does WMDC show your phone connected?
Click to expand...
Click to collapse
Nop .... i only hear the sound of "Plug in" of the USB and thats all...
nothing happens next ... =(
-------------------------------------------
No need for help any more .... =(
i have gave up on u guys ... "the best forum of mobile" disapointed me!
i have made a FORMAT to my comp
20 minutes and i got a clean new windows 7...
30 minutes done drivers ...
i wish i knew what WAS the problem ....
but any way
NOW every thing is working .....
THANKS ANY WAY!