Hi, I already read a lot in the forum and the wiki, but as my first try to update my rom went terribly wrong I tend to ask some pros for help
I got me a used XDA1, it worked fine and was a german O2 Model. Then I got the last Update from O2 (3.19) and updated it with success. Then I wanted to unlock it with your Special Edition Rom, downloaded it and tried to apply it just like the O2 one via active sync and progam A. Result was, that my xda got stuck, now I can only see the empty transfer bar on the xda and can´t connect to the xda with active sync anymore. Both resets won´t help to bring the xda back to live the silly bar comes back every time... I can still get into the bootloader, though. As far as I understand I can still get the thing working again with a SD-Card and a rom on it? Can someone pleasepleaseplease tell me which card to buy (I don´t have one jet...) and how to get a onto this card and where I can get this rom? I still have the Files this O2 exe unzipped onto my disk and theres a nice 31MB NK.nbf in the Program/German folder. I already found the description how to flash from a SD-card with the bootloader, I just don´t know where to find the right rom and how to put it on a card... And maybemaybe, could someone tell me the right way to get this O2 xda working with a D1 card without getting it stuck again???
Thanks a lot to all your answers, I really need this thing to work again, and still ask myself how I could try to update the rom without reading enough, seems I will cry into my pillow till it works again cause it´s the only cell I got at the moment
Download xdatools and install, choose the nbf file as source and your card reader/writer as destination, choose this from the drop down menu at the bottom. You will need a 64 meg minimum sd card, a card reader/writer, xdatools and the nbf file. Once xdatools has programmed the sd card you insert into xda, push reset while holding power, when prompted push the action key which is the centre of the 4 way rocker switch. You will find many roms in the the kitchen that is kindly run my lumpistefan. Make sure to choose sd card flashing at base of screen before cooking rom. Here is the link for the rom kitchen.
http://lumpistefan.dyndns.org/
thanks a lot for the fast answer I got all the progs and the original 3.19 german o2 rom from rom kitchen. Now I´ll just have to get me a SD-Card... One more little question. I can´t turn the XDA off with the powerswitch and after reseting it also turns on automatically. I´ll have to wait till Monday to buy a SD-Card, so is there a way to get the thing off although it is still in transfermode or will I have to leave it on and in the cradle?
If you want it switched off completely, just poke once into the hole under the headphone socket, this will completely disconnect the battery, when you want it back on just push once again. Always do that procedure after flashing a rom also, push once then leave for on eminute, push once more to switch back on with new rom and noot sequence.
works fine, thanks
Related
I acidently loaded the firmware for I-mate on to my XDA II and now all that comes up on the screen is HTC engineering mobility V0.23. I also can't get it to sink. What should i do?
This is a Demo phone i got for free so i cant send it back.
Thanks for any help
1. I can reassure you that you really did destroy your OS! :lol:
2. Try search at this site, this sort of topic has been being discussed since...
...I don't remember!
3. Have a glance at threads, discussing SD method of OS flashing + you'll need a ROM image file (for any kind of XDA2) and an SD card (>=64Mb).
Loading a new rom with an MMC or SD card
ok i went to www.romkitchen.de and created a rom for pocket pc 2002. So now all i need to do is load it on to my MMC card, put in into my XDA2 and reboot?
Pocket PC 2002 or Windows Mobile 2003 for a XDA2
Should i use Pocket PC 2002 or Windows Mobile 2003 for a XDA2?
Stop!!! The site you are looking at is cooking roms for the old XDA 1, it is not for XDA 2!
TY, i got a copy of some one elses OS, and im going to try to flash it with an SD card.
That didnt work, I dont think im putting it on the SD card right? Do i just copy it to the card or do i need to do somthing to the .nb1 file to make it a boot file?
Also my Bootloader is V0.23 kinda old.
Does any one know of a place i can send this to get it fixed in the US? This is a Demo phone i dont think i can send it back to O2.
Don't give it up yet.
1. XDA2 ROMs are marked 1.xx (1.60, 1.72...) - you need this ones.
2. How do you put it to the SD? You need OSimageTool or maybe other program to put it to the card in RAW format - not converted by active sync or so...
I tried using the OSimageTool to save the .nb1 into the .img but it tells me "don’t know how to write distinationfile". I was able to convert the .nb1 in to a .nbf but that’s it. Is there another conversion program out there?
Sorry i ment "destinationfile" all one word
xdatools are ONLY for xda1
if you want to mess with xda2 flashing
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
Is there a way to make a boot disk out of an SD card if so how?
Mine is defiantly wiped if I try to run an update to 1.60 using HimaUpgradeUt.exe it show all my image versions as blank. When I hit upgrade it just hangs on the install screen that says "current software is now being erased from your pocket PC. This will take only a few minutes." The progress bar never advances from there, I've tried to reset and it’s the same thing over and over.
Hi,
I have an XDA O2 (Wallaby) which I got from a friend of mine who used it without a problem in its life and now I am stuck with a flashing O2 XDA.
Let me try to best describe my problem.
I had copied some of my excel files onto the O2 and then I had a distinct feeling that it had gotten to be much much slower.I am not too sure if this is the cause.
I was not using it as a phone but one day I slipped in my SIM card so as to surf the net and it just would not connect via GPRS and after that it had become very slow hanging every once in a while so I did a soft reset but it still was slow and the GPRS would not connect neither did it detect my phone service provider.I used to surf prevously through GPRS without any problems.
Then I did a hard reset and it just wouldnt work after that it would start with the blue O2 screen and begin to flash on and off with a blank screen with a small keyboard icon in the lower right hand corner presumably the affected excel file....I think my XDA has a virus now please help me out from here.
I tried doing a hard rest and I depressed the reset button on the RHS side that's it(smaller hole bigger one for soft reset) Once I press down with the smaller end of the stylus I press it again then the blue screen with the O2 logo comes to life it stays on for sometime and then a "tink" noise comes and the busy sign comes as if it has just opened an application ..a blue small band on the top most corner and a small keyboard icon on the lower rhs hand of the screen then the screen begins to flash ten seconds apart for quite some time...infact that all it does before shutting down and restarting all over again.
Is there any other way to do a hard reset.What is the right way?? as on one of the forums said that I should depress the power button and the soft reset button at the same time for about 5 sec I tried the hard and something called the WALLABY Bootloader V5.15 came on the screen with the message 'WAIT' after a couple of nail biting seconds I got an error saying GSM ERROR the screen was a clourful white red green and blue strips....what happened??
Then I proceeded to depress the soft reset button it restarted with the usual error of a program being opened and the screen flashing..
Hope to get a reply from this forum.
Take care
Ciao
Al
flashing screen
almaal have you tried flashing with a sd card? the GSM error indicates that the radio unit is corrupt. Have you attempted to upgrade the rom? If u have was it programme A or Programme B? by the sounds of things you have. Does the power light light up? let me know the answers to this and i might be able to help
have you tried flashing with a sd card? the GSM error indicates that the radio unit is corrupt. Have you attempted to upgrade the rom? If u have was it programme A or Programme B? by the sounds of things you have. Does the power light light up? let me know the answers to this and i might be able to help
Hi,
1st off thanks for your reply....
I have downloaded Programme A to upgrade my rom but cant seem to get it loaded onto the SD card. I unzipped osimage.exe and tried to store it from my PC to SD card but cant seem to do it....furthermore I was advised by friends out here not to be a braveheart and venture to kill my XDA but still I'd like to try...you see I'm not to conservant with the software bit and I'm only a end user...
Could you give me a step by step guidance to get the software loaded to the SD card via a card reader and then flashing the rom..
Hope to hear from you....
Alvin
flashing from sd card
Firstly make sure u have winzip winrar or some other compression software on the computer then right click on the programme A exe file and click open with whatever compression program u have i use winrar so i will say open with winrar. You now need to extract all files into a folder.
Once you have done that open up OSimagetool and on source browse for the folder u just extracted the programme A to and look for nk.nbf,you will need to tell it to look for nbf files and not nb1 files , which is the default and select it,it is in the english folder. In the destination u need to select your sd card which should be in a card reader as u cant program it directly to the XDA or via the memory card, once you have done this click copy. when that is finished you need to take the card and place it in the xda and do a cold reset . A screen will appear saying SD Download click the action key on the pad to commence flashing. after a few minutes it will inform you that it has finished. remove the sd card and Cold boot again then once the wallaby has rebooted back to your bootloader screen soft reset it,ignore the gsm error now cross your fingers while you wait to see if it reboots. If it reboots ok set up activesync again and run the radio upgrade. By the Way any info on the sd card should be saved before attempting this as it will be overwritten by the osimage tool. Also only the xda can read the card , the pc will say it needs formatting Good luck
Any Luck
Did you have any luck reflashing with a new rom almaal?
I have followed the procedure. The system rebooted and I got the GSM error which I ignored and continued the process. The system rebooted properly i.e I get to see the start menu and the calendar, but the device does not get detected by activesync. Another thing to note is that the system has become terribly slow. And although the backlight is switched to on it the device keeps on flashing. What do I do now?
almaal said:
I get to see the start menu and the calendar, but the device does not get detected by activesync. Another thing to note is that the system has become terribly slow.
Click to expand...
Click to collapse
That´s quite normal on a device with the gsm error.....
Stefan
wallaby xda flashing
format the sd card then and copy the radio upgrade over to the card. not as an exe file almaal, right click it again then extract files and copy the files over , if u have a cab file including then just use file explorer on the xda to navigate to the storage card and click on it and it will install. If not then click on the rsupgrade.exe. Hope you have more luck with this than i have i had . Good luck
wallaby xda flashing
format the sd card then and copy the radio upgrade over to the card. not as an exe file almaal, right click it again then extract files and copy the files over , if u have a cab file including then just use file explorer on the xda to navigate to the storage card and click on it and it will install. If not then click on the rsupgrade.exe. Hope you have more luck with this than i have i had . Good luck
Not charging I think
Hi I dont know what to make of it but now my wallaby came to life with the rom that I flashed but it seems to have gone crazy. Let me best try and explain.
1) The green charge light does not come on when I put it onto the cradle or plug it directly for a charge.
2) It does not make any sound, no beeps no nothing....but when an mp3 is put on it plays
3)The back light does not come on which is enabled but does not work I have to work with a dark screen...is there a brightness control which can be adjusted...its like its on power save mode or something..
Now its back flashing the O2 screen again its become terribly slow and unstable and I have to do a constant reset. How do I know which is my ROM to flash, I've flashed the R.30.07 ENG Rogers (4700 kB available) from http://www.romkitchen.de/WM2003/form.php.
I somehow feel that my O2 is not charging
Can you make any sense of this ..
Alvin
Hi
And another thing is that I trird copying the radio upgrade over to the card and then clicking on rsupgrade.exe. The upgrade fails at 1% giving an error as follows:
Flash Failed!
Press ok to restart your device.
What could be the problem? and how can I fix it?
Thanks
See http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Regards,
Neil.
Flash Failed
Neilius you have obviously not been through this process, no offence, but as i have tried to ask with a few posts on here it seems when the radio upgrade fails the wallaby refuses to charge. Which i think is the reason the radio upgrade always fails at 1%. Unfortunately nobodys knows or is even interested in finding out why
Flash Failed
Neilius you have obviously not been through this process, no offence, but as i have tried to ask with a few posts on here it seems when the radio upgrade fails the wallaby refuses to charge. Which i think is the reason the radio upgrade always fails at 1%. Unfortunately nobodys knows or is even interested in finding out why
No Charge no back light
Hi,
I have flkashed my rom but I cant get the RSU upgrade done.Now I have a running O2 with no backlight and it does not charge....where do I go from here....please reply my life is a meess without my O2 is it time for a change...howz the O2 mini or the imate JAmin fed up with this GSM error.
Alvin
ok my phone is HTC 8525, with WM 6.1 professional . It worked fine for 3 days then it start freezing , before it does that a blue background will appeare ,then it will not let me do anything at all . When I try to touch an icon, it will say something like invalid location or could not find target . I have to hard reset it. sometimes I have to reset it 4 or 5 times a day . , In addition, the mini card will freeze the whole phone is there is a solution like reinstall the whole thing ? please help me I truly appricat it . In addition, the mini card will freeze the whole phone is there is a solution like reinstall the whole thing ?
Hmmm, "the mini card will freeze the whole phone"??? Are you referring to the SD Storage Card? Do you have any volatile data stored on the card? Any Today Screen Applications?
If this is the case, try shutting off the phone and removing the card. Then place the card into a card reader, and plug it into your PC. Make a folder on the desktop of your PC, and COPY all the contents of the SD card to the folder.
Now, reformat the SD card in your PC, as FAT32, and default for all characteristics.
Once reformatted, copy all that stuff back onto the SD card from the temp folder on your desktop, making sure everything is returned to it's original locations. Pop the SD card back into your phone and see if it's fixed. Sometimes, corrupted space on the SD card will make the phone behave very badly. Hopefully, this procedure might fix it for you.
-pvs
Yes Sir, i apaologize , i was refering to the SD card . i am just tierd resetting the phone every 4 hrs . do you recomend any shops that can fix the soft -ware . i notices when i start the phone and i go to clean tmp it will say" 8 Fils and 4 folders of 656 Bytes cleard ! . then 5 hrs later the blue screen comes back
After doing what pvs said, and if you still have problems I'd check for bad blocks with MTTY... I would also ,after confirming no bad blocks, would flash a stock rom then reflash wm 6.1 and see if that helps... Cheers...
Wow , how to do all that if you dont mind me asking , actually i took the SD card out i am not in need for it at the moment . can you please help me to do what you said and i truly appreciat it , Great thanks for both of you gents
pvs already says what to do in his previous post...
To check for bad blocks follow this : http://forum.xda-developers.com/showthread.php?t=377389
To Flash a stock rom you need to know what carrier the phone was on. Download the wm6 update from their site and, Making sure you have Hard SPLed your phone, I suggest flashing via the sd card method. Its safer than flashing through pc.
Format sd card fat32. copy .nbh file of the stock rom (you may have to search for it) onto the sd card and rename to "hermimg.nbh". Put back in hermes and reset to bootloader (power button, OK button above flywheel and soft reset with stylus. Hold all buttons until it goes to tri-colour screen). It should recognise the os flash and load up a screen showing 1st boot screen, 2nd boot screen, gsm And os (or something like that as cooked roms don't generally have the gsm part). MAKE SURE YOU HAVE AT LEAST 50% BATTERY!!!!! Follow the prompts... I generally use the sd card method to flash ALL my roms so I don't have problems like usb disconnecting or pc rebooting/hanging or power failures.
Hope this helps you out, Cheers...
BASELABBAS ... Please describe what you are doing when you say that you are "HARD-RESETTING" several times a day. Are you:
1) poking the stylus into the hole at the base of the unit?
- or -
2) holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR]?
If you are doing the first ... this is called a SOFT reset. The second is a HARD-RESET, and will wipe the phone clean of ANYTHING outside of what came with the ROM itself.
Since you have posted that you already removed the SD Card from the device, and can (for the time-being) live without it, I recommend you do an ACTUAL Hard Reset (backup anything you need to keep first) via step #2 above, and then be patient about installing any apps. I wouldn't do anything more than sync it up via ActiveSync with your contacts for the first few of days. If things start to go crazy without any third-party apps installed, then I would look into the steps that ultramag69 has suggested ... starting with a flash to a stock ROM.
WM6.1 has been a bit shaky on our Hermes thus far. Some people are getting good results, but a lot of others are having issues like you are describing. I would suspect that your ROM might not be a good match, before I'd suspect bad blocks at this point (and it's a bit easier to test for).
If the stock rom does better on your device, you can try flashing back up to a WM6.1 ROM after that. And if you haven't already, make sure that you have installed HARDSPL before doing any of this stuff.
Good luck,
-pvs
Mr. pvs , I am doing the #2 holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR]. I tried to download Hard-SPL 1[1].10, when I open it on my PC it will give me instructions then when I press upgrade I will see 4 color screen the Sync icon will disappear and then it will say that it lost connections.
it looks like i need to update
this what is say
From :
Image Version : TNT.19199
to
image version 2.05.255.1
BASELABBAS said:
Mr. pvs , I am doing the #2 holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR].
Click to expand...
Click to collapse
OK, well that's definitely a Hard Reset. So your WM6.1 Rom is acting flaky right aftwerwards, eh? I would say it's time to try a different ROM, as we've been discussing above.
BASELABBAS said:
I tried to download Hard-SPL 1[1].10, when I open it on my PC it will give me instructions then when I press upgrade I will see 4 color screen the Sync icon will disappear and then it will say that it lost connections.
Click to expand...
Click to collapse
No ... try Hard-SPL-V7.zip found at the bottom of THIS PAGE. I THINK you can flash it via the SD method if ActiveSync isn't working for you (if not, somebody please correct me). To do this, open the downloaded ZipFile with WinZip or WinRAR and copy the file inside named RUU_signed.nbh to your desktop. Rename it HERMIMG.NBH, and copy it to the root of your freshly reformatted (FAT32) Storage Card. Put the Storage Card into your device and press the side OK button and the power button simultaneously while resetting with the stylus until the tri-color screen appears and turns white. The device will find the HERMIMG.NBH file and offer to upgrade by pressing the Power Key. This will install HardSPL onto your device without the need for ActiveSync. You can also flash ROMs in this manner.
Again, good luck,
-pvs
No, You need to run a file from the phone itself to install hard SPLvia sd card. You can find it on page 116 of the hard SPL or how not to brick your hermes thread.
Cheers...
ultramag69 said:
No, You need to run a file from the phone itself to install hard SPLvia sd card. You can find it on page 116 of the hard SPL or how not to brick your hermes thread.
Cheers...
Click to expand...
Click to collapse
Thanks for checking me on that, Ultramag. I had a feeling there was something I was forgetting.
-pvs
Hi guys
I own a HTC TYTN (Vodafone 1605) having WM5 and would like to have latest updates and features on it. I checked HTC site and i suppose they are not offering any updates for this model.Please help since i am not very used in doing upgrades etc.
Thanks
Ashok
Start here!
DO THIS FIRST!(MOST IMPORTANT)
HARD SPL
http://forum.xda-developers.com/showthread.php?t=296722
THIS IS NEXT
SIM/CID Unlock
http://forum.xda-developers.com/showthread.php?t=293665
THEN GO HERE
Schap's WM6 ROM (It's great!)
http://forum.xda-developers.com/showthread.php?t=359458
IF YOU GET STUCK GO HERE
http://forum.xda-developers.com/showthread.php?t=455859
Mind you, Schaps is a very old rom now, go to the wm06 part of this forum to find roms that are more current.
It may be old but it still works great.
It might be old but i like it. It doesn't hang and all my 3rd party apps work flawlessly even TOMTOM 7.
What ROM would you suggest?
At the moment I'm using REVROM Lite. I changed the flash screens though as I like some others better. I also use Tomtom 7 though I have it installed on my sd card and just send a shortcut to windows startmenu folder. Have no probs whatsoever.
Its really fast and seems to be stable with me NOT having to soft reset at all for the last 2 days... You gotta admit thats pretty decent performance, I've also had no HR's or freezes. Could just be I've finally found the rom and setup that is good for me...
Cheers...
Yeh, i hear ya. I actually flashed two other ROMS on my phone tonight just to see what they were like, but i'm going back to schaps. It was stable and it seemed to give good battery life. I have all my 3rd party apps installed to my 8GB SD card to save space on my phone. Seems to work for me. Thanks for your input. Two heads are better than one unless one of them is a goathead. LOL Anyway thanks again.
Have been having similar problems upgrading my HTC TyTN from its official WM5 to the Official release of WM6. Every ROmor upgrade or program I have used has failed once it has switced the phone into bootloader mode even using Hard-SPL. Ive being crazy trying to find a solution. Hasnt help that Ive had enough trouble getting started thanks to using Vista-64bit and its driver signing problems. I have since sorted that problem and am now not getting any further with flashing the ROM.
I wouldnt class my self as an expert but I also would consider myself a novice as I build PC's and have flashed both my Xbox 360 and my PSP so am used to working in the shady underworld.
Vista Home premium
Ok here's what i've found with vista. I run AVG anti virus and spybot search and destroy on my laptop. When i use my laptop to flash a rom to my phone i have to turn both off. Even then when i flashed to the OEM cingular rom i had to put my phone in bootloader for it to flash. If i let the program put it into bootloader it wouldn't work. Now, when i flashed to shcaps and my preferred radio rom it worked fine as long as advanced network funtionality WAS checked. Before i found these fixes though i used the SD flash method which is in my opinion the best way to go since it is so simple. That is the way i flashed my Axim X51V so i was familiar with that method, i just had to figure out the correct procedure for the phone.
This is from the post that explains SD flash.
1. download hardspl v7 from the first post.
2. extract ruu_signed.nbh and rename it to HERMIMG.nbh
3. copy it to a microsd card, make sure the card is formatted as fat32
4. download sspl-herm from here
5. extract SSPL-HERM.exe and copy it to your phone.
6. insert sd card and run sspl-herm.exe on the phone.
7. you should see the tri-color screen and then it should change to this
8. press power button to start flashing
9. reset when you get the msg that its done
Good luck
OH and if you need the official Cingular WM6 ROM you can download it here.
If you have Hard SPL installed ignore the steps using SSPL.exe as that is Soft SPL. It's not as safe as Hard SPL.
Cheers...
PS. make sure you use a 2Gb or less sd card as the bootloader won't recognise sdhc cards, format FAT32 (most cards are default formatted FAT) & make sure of your spelling as it won't work otherwise - hermimg.nbh.
thank´s you all for help me upgrade HTC TYNT
Can some one know how can I get windows 6.1 for my dopod 838pro and installation procedure. I saw some preview from youtube that it will work like htc touch pro or touch diamond. http://www.youtube.com/watch?v=PsSNzYftjZs
OK, look at the top bar, You should see a word that looks like this - "Search". Click on it, type in a request making sure to specify the hermes. Wow, answers galore....
Sorry I tried my level best but I can't find any wm 6.1 for my dopod 838pro. Can you plz give me any direct download link in english version. My present rom
ROM: 3.54.707.3 (07/05/07)
Radio: 1.47.00.10
Protocol: 32.80.7020.20H
Try the WM06 part of the forum, I believe heres a sticky with a heap of cooked roms and the new WM6.5 in production on various posts....
At least tell us you Hard SPLed your Hermes, look here - http://forum.xda-developers.com/showthread.php?t=296722
You need to do this BEFORE upgrading the rom. You need Hard SPL V7.
I got problem to instal spl v7. When trying to update it after a certain next, the display gone multi color and it says that connection is no longer exist. when I check spl on my device it shows spl 2.03. I am using vista home. What to do. Sorry for bother you again.
Go to page 116,post 1160 of thread I gave you. It tells you how to install Hard SPL with the sd card.
Just remember, the sd card MUST be 2Gb or less, it has to formatted FAT32 and the spelling of hermimg.nbh is VERY important.
Cheers...
Thanks bro fainally I made it.
I still can't find the wm6.1 upgrade page. I tried HardSPL 7, it finishes in an instance, how do i check whether i have HardSPL it?
And where do i find the update for 6.1? I'm pretty new to all this, so I am kinda blur and lost now~
@ultramag69 i tried Hard-SPL-V7 with the help of this instruction http://forum.xda-developers.com/showthread.php?t=296722&page=116 and mobile said update in progress bfor half an hour and still its in progress it ill complete or is it in problem can i remove battery?....................
still update in progress more than 45 mins is this complete can i remove battery anyone pls help me..........
after one hour its in progress so i removed battery now mobile not power up not enter in to boot mode any solution? any one pls help me.................
Just Did my phone for the first time
Go to this link first and make sure your phone has the latest version installed.
http://forum.xda-developers.com/showthread.php?t=296722
Follow the sets it's easy enough
After you soft reset your phone
That being done you'r now ready to flash a new rom there are plenty on the hermes windows mobile 6 thread
http://forum.xda-developers.com/forumdisplay.php?f=355
I found this rom to be the most like the one on the u-tube video
http://forum.xda-developers.com/showthread.php?t=461490
Down load the rom, extract the files
rename the ruu_sgned file to "Hermimg"
Now put a micro SD memory card in a card reader
open my computer right click the drive that represents the memory card and format it
choose the fat 32 file system.
now copy the hermimg fie to the root of the card
soft boot your phone
press the power button to comfirm the rom update and watch the progress bar
when complete
reset your phone and the new software will install
if you get a new soft ware installed do you want to reset pick no
the phone will reset when all the software is installed.
great stuff
try a few rom
find the one you like best
sry but you will need to put that card in your phone after you copy hermimg onto it
maybe you should go to the how to unbrick my phone thread
didn,t see that last post
ouch!!
here's the best chance at I solution
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Go here
I hope you find an answer