Related
I flashed a custom rom before the radio. Im not an idiot,,, Im just acting like one
I see that several threads say to simply flash with the official carrier ROM if you mess up and flash a custom a ROM without flashing the radio first. But I cant connect via usb to flash a official ROM. It says that the device is not connected. I thought I could just then flash using the SD method but I cant find info on how to do that with the official rom speciffically.
I have flashed many phones but left for about 6 months and it looks like just because I use to know what I was doing doesn't me that I still do. Please help Im stuck on the carrier logo. I can get to the bootloader but it doesn't do me any good.
use the sd card method.
http://forum.ppcgeeks.com/showthread.php?p=181044#post181044
you will need to unpack the sprint rom first using winrar, to obtain the RUU_signed.nbh file.
So there is hope,,, great!
What I couldn't figure out this morning was,,,,,, I downloaded the official Alltel ROM but from what I understand I need to place a file with a nbh extension on the card....
Its been on the splash screen all day,,,,,, I get off in a few hours,,,, I'll go over the link u gave me and see if it leads me to a nbh file. Thanks.
Hello Everyone
I know, there are many How-To's and ways to achieve what I want. unfortunately non of those I tried have worked.
My goal. I want to unroot my Hero, to send it back to RMA, because the usb controller is not working. And this is the second biggest Problem atm.
All the How-To's to unroot the device an install the original RUU or at least most of them include the use of the USB function. (creating a gold card 4 example or flashing a different bootloader)
To the USB Controller. It is hopeless. I tried everything. I even set up a Linux VM but where ever I plug it in, the system won't recognise my hero. They don't even recognise something.
Lucky me, the Hero is still able to charge the battery.
*****
Ok lets give some details on the actual situation.
I'm able to boot to HBOOT/Fastboot (volume down)
I'm able to boot to Clockwork Mod Recovery 2.5.0.7 (home)
Right now, it's restoring the system to FroydVillain 1.7.1, because i formated the boot partition (After 5 hours, I was tired and did one big mistake)
> The restore worked. I have my old System again.
What I tried to do
1. I downloaded the actual RUU, ran it, got the rom.zip out of it.
2. Booted into Clockwork Mod and tried to install from zip, where i got [Error Message 1]
3. Renamed the rom to update.zip and tried to install toe "normal" way. Also got the same [Error Message 1]
4. Renamed the rom into HEROIMG.zip, ran HBOOT which checks the zip and led me to [Error Message 2]
Error Message 1
Code:
-- Installing: SDCARD:rom.zip
Finding update package ...
Opeing update package...
E:Can't open /sdcard/rom.zip (bad)
Installation aborted
Error Message 2
Code:
SD Checking...
Loading...[HERODIAG.zip]
No image!
Loading...[HERODIA3.nbh]
No image or wrong image!
Loading...[HERODIA2.nbh]
No image or wrong image!
Loading...[HERODIAG.nbh]
No image or wrong image!
Loading...[HEROIMG.zip] // takes about 3 minutes...
Checking HEROIMG.zip // takes about 1 minute...
Main Verion is older!
Update Fail!
I downloaded the actual Hero RUU three times from the website, in case something went wrong while dl.
I got an older RUU from a xda thread and tried it with tis one.
I am not able to create a goldcard, because you have to connect the phone via usb to a computer.
Well Any help is much appreciated.
Regards
mae`
Hey,
really sh*tty that usb ain't working..
having trouble from time to time myself, got a suggestion for ya though
1) find yourself a rom that is very close to a stock rom (suggesting stock WWE,
as can be found on this forum, mr bang, stock wwe rooted)
http://www.romraid.com/paul/hero/upd...5.5-signed.zip (maybe an option)
2) make sure it doesn't have a customized kernel (or flash the stock one )
3) make sure it doesn't have apps2sd
4) use universal androot => UNROOT
5) delete busybox from your phone
guess this should get as close as it can be to a stock sense rom
(meaning unrooted and minor customizations
grtz, [email protected]
Hey mattnmd
Thank you for the hints!
Actually I could not download the ROM because the link seems "wrong" but it pointed me in the right direction.
I found e repacked Stock ROM (1.5) which I was able to flash.
So... My base system is ok for the moment. BUT my recovery is not
There is still clockworkmod recovery installed and it won't let me install updates.
Now in the next step I need a way to flash a different recovery (the original) without the use of USB.
androot does work. btw =)
Thanks a lot
mae` said:
Now in the next step I need a way to flash a different recovery (the original) without the use of USB.
Thanks a lot
Click to expand...
Click to collapse
np man, but here i can't help
never got the problem
grtz
Put the Hero like stock without USB
Is there a solution for this already?!! I've exactly the same problem - USB doesn't works, not even for charge! And I need to make it stock-alike in order to send it to warranty. I managed to install the stock ROM but still, there's the AmonRa Bootloader installed... I created a goldcard without USB using this: w ww.mikesouthby.co.uk/2010/08/htc-desire-creating-goldcard-using-mac-or-linux/
but, when I try to apply the HEROIMG.zip trough Hboot, it says "Main version is older"
What am I missing?! Is the installed radio too recent for the stock image I'm trying to install?!
I have no solution jet. But I'll write as soon as I see a way.
_________________________
HTC Desire S - xda app
Worked for me!!!
Well, I found a way to solve my problem! I needed to put my GSM Hero as stock as possible (without root/custom ROMS/AmonRa/etc) without USB... The only solution, as far as I've read is to flash using a GoldCard the zip file from the RUU *.exe from HTC. I manage to create the GoldenCard without USB but when I tried to flash, it would say "Main Version is Older" after checking the HEROIMG.zip . It finally worked when I used this particular RUU version: RUU_Hero_HTC_WWE_2.73.405.38_WWE_release_signed_No Driver.exe from XDA thread #559622. Give it a try
Finally done
Hey dusturn
You are my (HTC) Hero
I just made the goldcard, and installed the new/old image (2.73.405.38) The Device got the old cupcake 1.5 on it and I was not able to get into recovery anymore!
It finally seems to be ok! Thank you very much!
dusturn said:
Well, I found a way to solve my problem! I needed to put my GSM Hero as stock as possible (without root/custom ROMS/AmonRa/etc) without USB... The only solution, as far as I've read is to flash using a GoldCard the zip file from the RUU *.exe from HTC. I manage to create the GoldenCard without USB but when I tried to flash, it would say "Main Version is Older" after checking the HEROIMG.zip . It finally worked when I used this particular RUU version: RUU_Hero_HTC_WWE_2.73.405.38_WWE_release_signed_No Driver.exe from XDA thread #559622. Give it a try
Click to expand...
Click to collapse
How did you make goldcard without USB? I have the same problem but cannot find a solution.
hi guys.
i tried to update my LG Optimus one (p500) with pc suite iv and the lg tool but both say im up to date. im on firmware 10a...
now i want to go to 2.2.2 and it seems i cant via that method. i read the other methods by manully upgrading and down grading firmware. im on MTN network here and i heard that in order to update my firmware, my network needs to allow it. ok so in africa everything moves at a very slow speed... riding a elephant to work is very slow pace .
so what i want to know is if i do this manual firmware update will it cause me problems? and is the roms and kernels region based... in other words will it effect my simcard and network ect.?
im rooted with Z4root and i got thunberg recovery + back up.
on the backup... i cant do back up of the sd-ext ... i presume its because i have not done a partition of my sdcard... is this correct... all others are backed up.
i also cant seem to get onto my sdcard via this recovery. it picks up my device but not my sd card. so if something goes wrong i can get onto my sdcard via recovery... SCREWED
i got windows xp service pack 3 and mac probook. i have the lg mobile drivers installed on the xp system.
i hope that im clear on what i need. id really be great full if someone could help me..
anyone?
Firefly137 said:
hi guys.
i tried to update my LG Optimus one (p500) with pc suite iv and the lg tool but both say im up to date. im on firmware 10a...
now i want to go to 2.2.2 and it seems i cant via that method. i read the other methods by manully upgrading and down grading firmware. im on MTN network here and i heard that in order to update my firmware, my network needs to allow it. ok so in africa everything moves at a very slow speed... riding a elephant to work is very slow pace .
so what i want to know is if i do this manual firmware update will it cause me problems? and is the roms and kernels region based... in other words will it effect my simcard and network ect.?
im rooted with Z4root and i got thunberg recovery + back up.
on the backup... i cant do back up of the sd-ext ... i presume its because i have not done a partition of my sdcard... is this correct... all others are backed up.
i also cant seem to get onto my sdcard via this recovery. it picks up my device but not my sd card. so if something goes wrong i can get onto my sdcard via recovery... SCREWED
i got windows xp service pack 3 and mac probook. i have the lg mobile drivers installed on the xp system.
i hope that im clear on what i need. id really be great full if someone could help me..
Click to expand...
Click to collapse
Dear i am really sorry to say that most of the things i am not able to understand. What i understood is
1) you want to change Rom (upgrade or downgrade).
2) Your SD card is not detecting in recovery.
What are the queries you have
3) GSM will work or not as you have heard it should be country specific.
Ok now here are the answer.
1) For downgrading the ROM, you can downgrade and upgrade any official ROM via KDZ updater. Here is the link. http://forum.xda-developers.com/showthread.php?t=883314
2) It may be something went wrong. Just restart your phone and have factory reset it may be solve your problem.
3) Yes you have heard it right. But that is only for 2.3.3. In case of 2.2 we have globe release so you can downgrade it without having any GSM issue.
From next time be precise so that people can understand what is the exact problem you are facing. If you have any query you can ask. Members will defiantly help you out.
sweetbinodray said:
Dear i am really sorry to say that most of the things i am not able to understand. What i understood is
1) you want to change Rom (upgrade or downgrade).
2) Your SD card is not detecting in recovery.
What are the queries you have
3) GSM will work or not as you have heard it should be country specific.
Ok now here are the answer.
1) For downgrading the ROM, you can downgrade and upgrade any official ROM via KDZ updater. Here is the link. http://forum.xda-developers.com/showthread.php?t=883314
2) It may be something went wrong. Just restart your phone and have factory reset it may be solve your problem.
3) Yes you have heard it right. But that is only for 2.3.3. In case of 2.2 we have globe release so you can downgrade it without having any GSM issue.
From next time be precise so that people can understand what is the exact problem you are facing. If you have any query you can ask. Members will defiantly help you out.
Click to expand...
Click to collapse
thank you for your reply.
sorry for not being clear.
let me try again:
ok so this is my phone at the moment...
p500 stock firmware 10a
rooted with Z4root
my recovery: recovery-RA-thunderg-2.2.1-GNM
i have not partitioned my SDcard
using super manager and file expert as my explorer
have titanium backup and backed everything up.
what did i do so far:
i deleted all the useless app that come stock.
what do i want to do:
1: i want to try different roms and kernels
2: i want to make sure that my nandbackup is done correctly
3: i want to know if all the roms and kernels will work in my region (south africa) even though my service provider (MTN) has not allowed any updates. so can i install a 2.2.2 version rom and will still be able to use is in my country
my Q? :
1: do i need to update my firmware to 2.2.2 if the kernel or rom is based on that firmware 2.2.2( or what ever version). or does the roms come with that firmware and if i install that rom wil my firmware be at what ever version the rom is?
2: i backed up everything i could. but when i tried to backup my sd-ext it says "something went wrong, check log". so is this because i did not partition my SDcard yet?
on the SDcard not picking up... ONLY!!! when I'm in my recovery (recovery-RA-thunderg-2.2.1-GNM), when i select usb mode in my recovery then it enables it but my pc does not pick it up as mass storage, so i cant copy over any files while in recovery mode. what must i do?
3:can i install any roms even if MTN has not enabled firmware 2.2.2
sorry for the long post
hope im more clear now
1.no you dont have to upgrade or downgrade...just flash the rom of your choice..
2.flash a new recovery and try...
3.you can use any rom anywhere .....what has mtn got to do with the phones firmware...is yours a cdma phone??
hit the thanks button if i helped you
Firefly137 said:
thank you for your reply.
sorry for not being clear.
let me try again:
ok so this is my phone at the moment...
p500 stock firmware 10a
rooted with Z4root
my recovery: recovery-RA-thunderg-2.2.1-GNM
i have not partitioned my SDcard
using super manager and file expert as my explorer
have titanium backup and backed everything up.
what did i do so far:
i deleted all the useless app that come stock.
what do i want to do:
1: i want to try different roms and kernels
2: i want to make sure that my nandbackup is done correctly
3: i want to know if all the roms and kernels will work in my region (south africa) even though my service provider (MTN) has not allowed any updates. so can i install a 2.2.2 version rom and will still be able to use is in my country
my Q? :
1: do i need to update my firmware to 2.2.2 if the kernel or rom is based on that firmware 2.2.2( or what ever version). or does the roms come with that firmware and if i install that rom wil my firmware be at what ever version the rom is?
2: i backed up everything i could. but when i tried to backup my sd-ext it says "something went wrong, check log". so is this because i did not partition my SDcard yet?
on the SDcard not picking up... ONLY!!! when I'm in my recovery (recovery-RA-thunderg-2.2.1-GNM), when i select usb mode in my recovery then it enables it but my pc does not pick it up as mass storage, so i cant copy over any files while in recovery mode. what must i do?
3:can i install any roms even if MTN has not enabled firmware 2.2.2
sorry for the long post
hope im more clear now
Click to expand...
Click to collapse
Good dear this time you are almost on trac.
1)first of all you can flash Mik 2.3.4 rom with Franco kernel v18 find it on rom dev section.
2) it doesn't matter most. You can have contact backup on gmail server and backup your sms from any sms backup apps.
3) mike and andy from will work.try those.
1) every rom comes with kernel (firmware). You can simply flash rom and you done. Like if you are flashing Mik rom just flash zip file from recovery and you are ready to roll
2. You can ship this part.
3. this is bit controversial. official rom will work but may be without GSM. But you can flash mike and andy rom. It will work 100%..
Sent from my LG-P500 using XDA Premium App
sajjan said:
1.no you dont have to upgrade or downgrade...just flash the rom of your choice..
2.flash a new recovery and try...
3.you can use any rom anywhere .....what has mtn got to do with the phones firmware...is yours a cdma phone??
hit the thanks button if i helped you
Click to expand...
Click to collapse
1. thank you
2. must i go clockworks?
3. MTN is gsm i think... i was just wondering is it is going to be a issue since MTN need to allow update if i wanted to update my phone through pc suite or lg tool.
sweetbinodray said:
Good dear this time you are almost on trac.
1)first of all you can flash Mik 2.3.4 rom with Franco kernel v18 find it on rom dev section.
2) it doesn't matter most. You can have contact backup on gmail server and backup your sms from any sms backup apps.
3) mike and andy from will work.try those.
1) every rom comes with kernel (firmware). You can simply flash rom and you done. Like if you are flashing Mik rom just flash zip file from recovery and you are ready to roll
2. You can ship this part.
3. this is bit controversial. official rom will work but may be without GSM. But you can flash mike and andy rom. It will work 100%..
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
1) ill try that rom
2) everyone seems to say back up 1st.. so i did but as i say i cant back up sd-ext... so is this just if i have partitioned?
and how can i fix the fact that i cant get onto my SDcard when in recovery... must i use clock works instead?
are you saying i must not back up?
hehehe
Look, your operator has better things to do than implement FW version checking. GSM is a standard stuff, either the phone talks to BTS or does not.
try clockwork....your 3rd question is answered above
Hey guys,
I jumped the ICS train pretty soon with my GSII, and so far am quite happy with it.
Especially important for me is the full device encryption offered by ICS, which I got enabled from the first hour (works great btw., but don't use CWM recovery and disable USB debugging).
Now, I'd like to upgrade to a newer iteration of ICS. My question is:
As my phone is encrpyted, I image I cannot use ODIN, right? What is the supposed way to update, can I perhaps use Mobile ODIN?
Thanks very much for any help!
I would also like to know if and how I can upgrade my phone while it is encrypted.
Anyone?
It has been over a month. Any news on this? This will be the last time I recover this thread if no one can answer OP's question.
if u encrypt and incase u flash a new rom ur sd card wud b bloced and u will have to flash te stock rom again and u will have to format it to gain access to internal sd
Flashing Firmware on a Fully Encrypted ICS
neerajganga said:
if u encrypt and incase u flash a new rom ur sd card wud b bloced and u will have to flash te stock rom again and u will have to format it to gain access to internal sd
Click to expand...
Click to collapse
See http://forum.xda-developers.com/showpost.php?p=24923240&postcount=16 and http://forum.xda-developers.com/showthread.php?t=1630941
Ed
Hello!
I need some help and I know this is the place to find it!
I have searched for several days all over the internet trying to read and gather information, and I am coming up short.
I know Bruno Martins has posted some information on his blog on how to "readback" (backup) your current rom for your phone, but there is no information on how to flash the entire ROM package back to your phone (at least with regard to the errors you may receive).
Basically, I am looking for some help on how to backup one of my phones entire rom package and put it on my other phone that I messed up via the Smart Phone Flash Tool (the exact same model: Star Touch Diamond 2 B2000 MT6573).
The new phone works perfect, I have never touched it, my old phone which is the same model I deleted and formatted the system so I need to put the stock rom on.
I was able to do a "backup" of my new phone, but when i try to flash the preloader and uboot, etc, the sp flash tool says error loading file, or region too large with overlap.
Any help would be greatly appreciated!
By the way, my phone is not bricked, but I cannot access recovery! I was able to find and install another fully assembled rom to my phone and the phone does power on with lights, but it doesnt have the display driver I need so I cannot see anything.
The reason I flashed another rom was because the phone was essentially bricked and wouldnt do anything, and that was the only rom I could find on the internet that was a full package (preloader, uboot, system, etc) but isnt compatible with phone.
Anyhow, if I understand correctly I need to use hexadecimal calculator to find length of partitions of original phones rom, readback the files, somehow edit the preloader file? then flash them back to the old phone?
Please help!
I would love to make a tutorial of this method with pictures and possible errors for everyone if we could get this solved!
Please point me in the right direction!
And I wanted to thank BRUNO in advance for his hard work and help!!
have you tried the neutrino rom from notorious? its reallllly small around 50mb. you may be able to install that since it so small, then work your way back down? not too sure and i can say im no grandmaster but it might work!
***derp. neutrino... thats for atrix only. but hey same concept. maybe a small barebones rom will get you running enough to get things done properly.
Hello stokemonkey!
No, I have not tried the neutrino rom. My main goal is to take my working phone and copy the firmware to my other phone which is the same model. I attempted to flash a rom and then it didnt work out so well (phone still lights up, drivers are not compatible).
I all else fails I can attempt the neurtino rom (as long as you dont have to install from sd card zip file because I cannot!)
the neutrino is an Atrix 4G rom only, so you cant use it and it also needs to be installed via internal so its a no go either way. isnt your phone the china "htc" model? i dont have much user time on an htc so im not too sure what you can do?
again id try to find a barebones that you can flash the way you did with the rom that gave you errors. ill try to do some searching too and see what i can find. let me know if you get anything workin! and if there is someone else out there that can enlighten the both of us help would be appreciated!
and isnt yours like an evo 4g? maybe one of those roms will work?
Thanks for your response and suggestions. I will try to dish up a small tutorial with how far I can get in the backup/flashing process. I can check for an evo 4g rom and see what the specs are. The current rom I used i believe works, but doesnt have the video driver so the screen has no image. I believe each partition of ram has a set size so you can only flash a rom for the mt6573 chipset which will fit in the available space for each partition and also happens to contain the video, audio, bluetooth, etc drivers.
I have used SP Flash Tool and was able to backup all of the partitions of my working phone but the SP Flash Tool gives all sorts of errors when I try to load the files and flash them to my non-working phone.
The funny thing is that I downloaded files for a different phones rom and was able to flash those to the non-working phone, as mentioned in my previous post, which allows the phone to power on, but the phone doesnt work besides lighting up.
I know it is possible to make a backup of my good phone and flash that rom onto my non-working phone, I just dont know what I am doing wrong.
So far, this is what I have done . . .
1. Installed SDK tools for android
2. Obtained my scatter txt file by using command prompt
3. Used MTKRomStudio to open that file which tells me the addresses of all the partitions and their file sizes
4. Used SP Flash Tool V.2.11.29.00 to "readback" (backup) each individual rom file (preloader, uboot, bootimg, android, dsp, etc)
5. Confirmed the file sizes of each of the above files to what MTKRomStudio said the file size should be
6. Attempted to load these files into SP Flash Tool and get errors such as "partition too large, failed to load", or "partitions overlap".
7. I was able to open some of the partitions such as android, and usrdata but when attempting to flash I receive errors such as "dram error".
8. I was able to download an entire backup of all "readback" files for a different model phone, and each one of those files loaded fine and downloaded to my non-working phone.
9. Just to mention, my non-working phone was completely dead (no power up, no lights) before I flashed the random phone rom I found online, and now at least it powers up (lights up).
Anyone have any information? I have created a small visual representation of what I have been looking at and messing around with. Let me know!
Mt6573 phone flash help
Hi all, I need help. I used sp flash tool and flashed the original files to my phone. I then restarted the phone and it would not go past the blue android screen. I let se overnight and still no success. After that i flash the boot and still no progress. Finally i flashed the uboot and now it only lights up but no picture at all. I have used sp flash to try to flash the entire file system back to the mt6573 but it will not flash the recovery, android, or sec_ro files. Can anyone help?
CrimsonX said:
Hi all, I need help. I used sp flash tool and flashed the original files to my phone. I then restarted the phone and it would not go past the blue android screen. I let se overnight and still no success. After that i flash the boot and still no progress. Finally i flashed the uboot and now it only lights up but no picture at all. I have used sp flash to try to flash the entire file system back to the mt6573 but it will not flash the recovery, android, or sec_ro files. Can anyone help?
Click to expand...
Click to collapse
Same problem here except I can't flash dsp and preloader
UPDATE : flash worked finaly.my phone is fixed
Sent from my GT-P5110 using xda app-developers app
Whistler011 said:
Same problem here except I can't flash dsp and preloader
UPDATE : flash worked finaly.my phone is fixed
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
Please share how you did it, i'm in the same position with a MT6573 phone that are stuck on boot, and wont accept the preloaderfile
nsxtas said:
Please share how you did it, i'm in the same position with a MT6573 phone that are stuck on boot, and wont accept the preloaderfile
Click to expand...
Click to collapse
Same here.
Can somebody please post all the files .
I have an Alcatel one touch 918 not d/m/n
It`s the second phone that i have bricked.
Sharing it`s caring.
LeStonga said:
4. Used SP Flash Tool V.2.11.29.00 to "readback" (backup) each individual rom file (preloader, uboot, bootimg, android, dsp, etc)
Click to expand...
Click to collapse
I'm using MTK6573 phone but could i know how do you start the "readback" using SP Flash. I'm not able to start it while holding VOL-UP button and connect the USB data cable into your phone. Are there any other methods to start it. Thanks for your help.
CM
Why don't you make a try with CyanogenMod?
LeStonga said:
Thanks for your response and suggestions. I will try to dish up a small tutorial with how far I can get in the backup/flashing process. I can check for an evo 4g rom and see what the specs are. The current rom I used i believe works, but doesnt have the video driver so the screen has no image. I believe each partition of ram has a set size so you can only flash a rom for the mt6573 chipset which will fit in the available space for each partition and also happens to contain the video, audio, bluetooth, etc drivers.
I have used SP Flash Tool and was able to backup all of the partitions of my working phone but the SP Flash Tool gives all sorts of errors when I try to load the files and flash them to my non-working phone.
The funny thing is that I downloaded files for a different phones rom and was able to flash those to the non-working phone, as mentioned in my previous post, which allows the phone to power on, but the phone doesnt work besides lighting up.
I know it is possible to make a backup of my good phone and flash that rom onto my non-working phone, I just dont know what I am doing wrong.
So far, this is what I have done . . .
1. Installed SDK tools for android
2. Obtained my scatter txt file by using command prompt
3. Used MTKRomStudio to open that file which tells me the addresses of all the partitions and their file sizes
4. Used SP Flash Tool V.2.11.29.00 to "readback" (backup) each individual rom file (preloader, uboot, bootimg, android, dsp, etc)
5. Confirmed the file sizes of each of the above files to what MTKRomStudio said the file size should be
6. Attempted to load these files into SP Flash Tool and get errors such as "partition too large, failed to load", or "partitions overlap".
7. I was able to open some of the partitions such as android, and usrdata but when attempting to flash I receive errors such as "dram error".
8. I was able to download an entire backup of all "readback" files for a different model phone, and each one of those files loaded fine and downloaded to my non-working phone.
9. Just to mention, my non-working phone was completely dead (no power up, no lights) before I flashed the random phone rom I found online, and now at least it powers up (lights up).
Click to expand...
Click to collapse
I have a MT6575 phone and I have exactly your nr. 7 issue (BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)). Were you able to get this working somehow? I am confident that the selected partitions are for this phone as I read them out myself. But flashing back won't work. Does anyone have any leads?
e-lime said:
I have a MT6575 phone and I have exactly your nr. 7 issue (BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)). Were you able to get this working somehow? I am confident that the selected partitions are for this phone as I read them out myself. But flashing back won't work. Does anyone have any leads?
Click to expand...
Click to collapse
If you have the correct files use the newest version:
http://forum.xda-developers.com/showthread.php?t=1982587
It is easy to mess things up if you try random files.
MTK 6577 and SP Flash Tool
I too am also having problems with the flash tool. I am trying to help a friend bring his chinese note 2 clone back to life. He somehow got CWM onto the phone and the custom recovery seems to be functioning properly, but I cant find any sort of ROM file to flash in recovery.
Now I am going back and trying to restore the phone to factory using the flash tool. Installed the VCOM drivers, then went to load the scatter file we obtained from the factory (Bro Tech) it says the scatter file is incorrect format?
My question is: are there any roms we could try to flash on this phone from CWM or do we have to use the Flash Tool? I'm hoping since CWM seems to be working that I can simply flash an acceptable rom with that instead of trying to find a scatter file.
Maybe someone can suggest some ROMs to try flashing with CWM. The phone is: Goophone N2 7100 I believe. Thanks for reading, I really want to help him resurrect this interesting piece of copyright infringement (the phone looks amazingly like a Note 2 till you get close to it)
Evita Carbonized
GTab 2 7 AOKP'd
DollarStrawz said:
I too am also having problems with the flash tool. I am trying to help a friend bring his chinese note 2 clone back to life. He somehow got CWM onto the phone and the custom recovery seems to be functioning properly, but I cant find any sort of ROM file to flash in recovery.
Now I am going back and trying to restore the phone to factory using the flash tool. Installed the VCOM drivers, then went to load the scatter file we obtained from the factory (Bro Tech) it says the scatter file is incorrect format?
My question is: are there any roms we could try to flash on this phone from CWM or do we have to use the Flash Tool? I'm hoping since CWM seems to be working that I can simply flash an acceptable rom with that instead of trying to find a scatter file.
Maybe someone can suggest some ROMs to try flashing with CWM. The phone is: Goophone N2 7100 I believe. Thanks for reading, I really want to help him resurrect this interesting piece of copyright infringement (the phone looks amazingly like a Note 2 till you get close to it)
Evita Carbonized
GTab 2 7 AOKP'd
Click to expand...
Click to collapse
Create personalized file scatter for your device with MTK Droid. Here: http://forum.xda-developers.com/showthread.php?t=2160490
[email protected] said:
Same here.
Can somebody please post all the files .
I have an Alcatel one touch 918 not d/m/n
It`s the second phone that i have bricked.
Sharing it`s caring.
Click to expand...
Click to collapse
Have a alcatel 4033a Phone Got bricked and needs to be flash any help on that ..? plz i need help
Alecupid said:
Have a alcatel 4033a Phone Got bricked and needs to be flash any help on that ..? plz i need help
Click to expand...
Click to collapse
hi, i've made a mistake.
I've installed an odex version from a modified recovery(with dalvick cache). Can anyone help me?