I have upgraded my Himalaya to 1.50g and yesterday forgot to charge it and now it won’t turn on even I’ve put it in the cradle for 2 hours now. How can I fix it and prevent it from happening again? It didn’t happen to me before upgrading to WM0.5
tried reset both the normal reset and the special 2005 hardreset ?
Yes, I’ve try both. But no sign came. Only the red light gets on when I put it in cradle
Put the battery off and place it on the battery slot behind the cradle..
if still the same.. reply ASAP!
I’ve charged the battery since got your advice but it did not help also
I can not see any sign that my Himalaya is alive but the red light when connected with the power supply. With the power I’ve tried to come to bootloader mode but without success. It didn’t respond any more
I’ve just managed to wake it up one time. It comes as from hardreset. The battery indicator showed backup battery 100%, main battery 34%, but it last only about 5 minutes then come off again and the red light come back
sounds like a hardware issue with the battery
or a very very naugthy unstd sim card
Now it’s working again!
Thanks lot! I have cleaned it from inside out let the battery full charged for 1 night, managed to hardreset it, reinstalled the rom and now it’s working again
Related
May someone please help me?
This morning I tried to turn on my device (at night I turn the radio off) but it was dead, no way to wake it up... So I put it on charge in the craddle but all that changed was a fix red light on the left.
I tried to remove the battery bat it didnt have any effect.
I tried to hard reset, but nothing.
This is the end of a horrible week, in fact I've had also had huge problems with battery duration, device hot burning and loosing all charge in two hours, so yesterday I had to hard reset and restore all data with Sprite Backup. Everything seemed to work fine until this morning.
I have to say that the last application I installed before having all these troubles was SpriteBackup! Might it be the point?
Please help me.
Wow, after removing battery once, twice... testing, charging-recharging the device woke up.
the battery is 0% and now charging, but I'm afraid the problem might come back.
I read some threads about issues in restoring data (also causing several hard resets): does it happen only with windows backup application or even with spritebackup? It should be a chance, but it's after installing spritebackup that my device (before working fine) started having charge issues and hard boiling temperatures (as it it was hard working in background all the time).
thanks to all who will help me understand solve these doubts.
Now it's charging but the divice is very hot... I never noticed it before :?:
It was unlocked and working perfect until the battery went completely dead and wasnt charged back up for a week. After pluging in the charger I was unable to do a complete charge as the pda keeps starting up. It runs for about a minute or two then restarts and boots back up, the cycle continues with no end. I got to work for about 10 ten minutes, the phone worked, the charger was active in the battery option menu, but then it started all over again. I've reflashed and changed roms. The amber charge light does appear. Also hard reset doesnt work. Please help, bought the phone used but only got to enjoy it for a day.!
It maybe the battery is banjaxed, I have seen similar behaviour with an ipaq and a defunct battery.
if not its board memory
if im right yourin big trouble u have to replace the whole main boards .. i hope im wrong it juist bthe battery.
good luck bro
Hi there,
I have a special question to my G4 witch i do not get in operation anymore: The Problem is, that the device does not turn on, independent any keys. Either the ON-Button, Soft-Reset, Hard-Reset i do not get any of the "normal" screens. The display does not light.
Additional, the red power-charge-LED does not light when i plug in the USB-poer-supply. The same, if i disassemble the battery and plug the G4 to the power-supply...
The device has not been used for a couple of months. The last action a Upgrade to WM6.5 that worked definitively fine for a while.
Has anybody an idea? Or happend before?
Thanks in advance
Ernie
i think it`s easy
hey .. i doubt you have a problem with your g4 phone, i think you have a problem with the battery. since you left the batter inside the phone for alot of months and you didn`t use it, i think the battery is super dead, so dead, that the g4 cant power off and go to charge mode. 1 : you could try letting it charge more, like .. 1 hr plugged in , orrr , you could find an universal charger, which charges the battery by touching it`s + and - with it`s pins and putting electricity in it. (sorry for the bad explanation but i`m from romania). I think one of them two should work, if you know some other friend who has a working g4 just try with his battery. Good luck ! ^_^
Thanks for your reply.
But it happens without (!) the battery: If disassemble the battery and connect afterwards the power cable, the red LED does not flash, and no key has a function. As Soft-Reset "switch" and Hard-Reset (2-button on the left plus Soft-Reset-Switch)
First i mentioned the same as you thought...
Has anybody an idea what can be done here?
Thanks in advance.
Ernie
I'm encountering this same problem. I let the device charge over night with no luck. It will not power on at all. The battery was working fine last week. its completely dead
My Universal turn on the red LED for a seconds and after that do not charge and do not turn on. Have you find any solutions?
Thanks
exactly the same problem here on touch 3g
i got my touch 3g in Jan 2009 in Shanghai,China. Now i'm in singapore.... it's bricked, i didn't do anything wrong, it's not dropped on the ground or into the water, yesterday it was fine, but this morning i just found that it's power off. plugging in the power cable , and i won't see the orange power led. it's completely dead, soft reset and hard reset can not be initiated, because it refuses to power on.
i'm going to htc care center at harbourFront next weekend ...
JeromeMorrow said:
My Universal turn on the red LED for a seconds and after that do not charge and do not turn on. Have you find any solutions?
Thanks
Click to expand...
Click to collapse
oglop said:
i got my touch 3g in Jan 2009 in Shanghai,China. Now i'm in singapore.... it's bricked, i didn't do anything wrong, it's not dropped on the ground or into the water, yesterday it was fine, but this morning i just found that it's power off. plugging in the power cable , and i won't see the orange power led. it's completely dead, soft reset and hard reset can not be initiated, because it refuses to power on.
i'm going to htc care center at harbourFront next weekend ...
Click to expand...
Click to collapse
You’re in the wrong section this is the Wizard forum.
I use a universal charger. Its one which takes the battery not one which plugs into the phone ...
whenever I let my phone run flat I leave the battery in the charger for a couple of hours then put it back in the phone and connect the phone charger. Once there are enough electrons whizzing around in the battery there's enough power to drive the IC that manages the charging in the phone ...
if the battery is too flat it won't even open the gates for you ...
HI,
I purchased Touch Dual from UK as SIM FREE unit last year. Couple of days back i checked the HTC web site and saw the WM 6.1 upgrade from HTC available there; So yesterday i downloaded that file i.e. " RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship " and upgrade the device.
At the time of running the RUU the unit battery level was 70% and after the upgrade the battery was almost 55%. So i kept using the device and that was perfect. Anyhow i forgot to recharge the device and next morning i realised that Unit went off somewhere during the night. So i simply attach the charger cable with device but immedately i realised that the usual orange light hasn't turned on and after a while the red colour light shows up instaed of orange. Upon seening this i try to turn on the device and its turned on BUT went into AEROPLANE MODE automatically and stays there. And above all the BATTERY ALWAYS SHOWING THE CHARGE LEVEL IS 0% besides the fact that unit is continiously charging from the last 24 hours....
And if i remove the charger the becomes dead..
Any suggestion would highly appreciated.
This can mean two things:
1. Your battery is broken
2. Your charger doesn't work well (I had this with a blackberry charger I borrowed from someone)
The second is the easiest to check if you charge it with a usb cable instead of the charger you can see if it works or with another charger of course. It switches to airplane mode when the battery level is to low so don't worry about that. The led is red when it really has no battery level at all so also nothing to worry about
Good luck.
wmn79 said:
This can mean two things:
..... nothing to worry about
Good luck.
Click to expand...
Click to collapse
Thanks for the suggestion. The problem is solved ... Now i know that if battery went to ZERO level than one must remove the SIM and charge the unit.... for atleast the initial 10% charge level... after that insert the sim into unit...
Anyway Thanks again
Hi guys,
I'm repasting what I wrote in my previous thread hoping you can have a clearer view of my issue.
My phone has the standard ROM, WP 6.5, nothing changed
I never flushed the phone, never formatted it, etc, everything is legit!
My TG01 has died many months ago and now I'm looking into ways of having it re-activated. I will explain to you my possible theories why it died, so maybe some of you will have an idea how to fix it
- For the first 4-5 months I only used PC USB (synchronization) charging, as I had a UK mains which obviously does not work in Europe. I noticed that the battery indicator was never really accurate, showing me the battery levels very vaguely.
- I often synchronized my Outlook e-mails with my mobile phone, one day my phone died when I chose to synchronize all e-mails. It died to an extent that the battery was completely empty. My PC wouldn't recognize it and it would only start for 5 seconds (the red led lamp would shine) and then die...
I somehow managed to revive it with my normal charger but afterwards it used to overheat quite a lot...
- One day I left it to synchronize again and the battery died on me again (at least that's what I think had happened)... the difference that USB PC charging did not work anymore as well mains charging. I was desperate enough to buy a replacement battery from eBay and I still have the same story. When I connect the phone to the charger I don't even see the diode lighting up anymore.. NOTHING. Any tips?
Could it be that the replacement battery is also so empty that even a mains can't charge it anymore? I heard someone mention something with cutting a wire etc, ... would that help me? IF so.. how do you exactly do that?
Thanks!
Hi guys,
So far no luck in getting updates from you, but I've got an update for myself:
I somehow managed to get the LED diode turn red when I connected it to the computer, which should be indicating the fact that the phone is charging, right? When I try to power it up the device manager recognizes a device called TOSHIBA DL... does this mean my phone is in some sort of emergency state?
The screen lights up a bit as well, but remains black.
yess this means your tg01 is NOT bricked. try take your battery out and put it back in so its totaly switched off then press n hold CAMERA, VOL UP, POWER keys to perform a master reset. if that doesnt work try this,
use the short pin method, put a .tsw in a PRG folder at the root off your sd card and short pins 1 and 3
if not,
download a tg01 rom in a .bin and flashh the .bin via tgdownloader
if you dont know these methods please tell me and i will link and help you.
Hi!
Thanks for your reply. If you could guide me a bit with the pins method, that would be great.
Also, when I plug in the mobile phone to charge now the red light is now flashing, instead of remaining constant, what could that indicate?
Phone never turns on now
hi there, it sounds like your battery has gone flat try leaving it on charge via USB for a few hours see if that will kickstart it and for the pin method
http://forum.xda-developers.com/showthread.php?t=654674
try to charge your battery first as it may just be a flat battery but if not you may need to reflash your rom via the pin method
if there are any problems or you are unsure message me back