I already install the ACTIVESYNC 4.0, After click the HIMAUPGRADEUT, the update screen in my windows XP just until the 0% there then stop. (the error is can't connect to my XDA II, pls reboot ur computer or ur XDA)
my XDA II no boot to the install mode also. (still in the windows, no boot to the blank screen). me already try more than 10 time still the same. anybody can help me n tell me wat happen??
i install the wm2003 n wm 2003se no this problem, anybody pls help?
thank u so much.
have you put the device into bootloader :?: mode please refure to this picture hope it helps http://wiki.xda-developers.com/index.php?pagename=Himalaya_2005_How_to_Hardreset_and_BootLoader
Some people have problems putting the device in Bootloader mode, if that's your case, place the attached file on the same directory as the ROM upgrade and installer.
This will automatically put the device in Bootloader mode.
Good Luck!
Related
i am newbie to pocket pc...
can anybody can teach me how can i reinstall back to my original wm2003...
i downloaded the 'O2XdaII_WM2003SE_Asian_Edition' zip file...i just copy the 'HimaGetDeviceData' file into the main memory and open the file...the screen suddenlly turn black.. it only show 'serial ' and 'v1.06'...i not yet upgrade the devide yet..
what is it means?..is it was turn to bootloader mode?....i try to press all the button and reset button was no effect..HOW can i turn off the bootloader mode???
.. i din do any installation to wm2003se or wm5... my xdaII is in original condition..stock... 1.66rom, wm2003.
i am very panic...i can't do anything...i just newbie to pocket pc...
Plz HELP me...
p/s :forgive me for my english
sounds and smells like bootloader mode;
get the latest firmware for your PDA from your provider, dock the PDA and let it install.
Don't panic, this happens when you execute this himagetdevice.exe on your XDA.
Put the XDA into the cradle, then execute ON YOUR PC the program himaupgrade.exe that you should find in the extracted zip directory of the ROM you downloaded.
Cheers
Pat
thanks v much.. ...prob solve!!
Hi,
My XDA II was up and running until I wanted to flash it with Wm2003se.
I not sure if the battery is fading out or what but the flash didn't conplete and I am left with the "serial 1.06 boot screen" I have tried numerous times of taking out the battery, letting everthing drain out and trying again. but it still goes back to the serial screen. Also activesync won't recognize the device and Windows XP picks it up as "Unknown Device". When I try and reflash it, I get the "communication error". Could someone dump thier Rom and/or instruct me on how to flash my device using my SD card?? Or if there is another way to revive my XDA II, I am open to anything. Thanks!!
Shane
Hi
Am also facing same problem on my O2 xdaII..it always shows serial v1.02
can any one help us pls..
tks isse
Hi
same problem whit MDA ll t-mobile de.please help
shane said:
Hi,
My XDA II was up and running until I wanted to flash it with Wm2003se.
I not sure if the battery is fading out or what but the flash didn't conplete and I am left with the "serial 1.06 boot screen" I have tried numerous times of taking out the battery, letting everthing drain out and trying again. but it still goes back to the serial screen. Also activesync won't recognize the device and Windows XP picks it up as "Unknown Device". When I try and reflash it, I get the "communication error". Could someone dump thier Rom and/or instruct me on how to flash my device using my SD card?? Or if there is another way to revive my XDA II, I am open to anything. Thanks!!
Shane
Click to expand...
Click to collapse
Come on....Somebody help us, we have a crisis club going on here!!!
did u guys follow all the intructions in upgrading the rom?
try this
disable activesync by ctrl+alt+del and kill wcescomm.exe by end process
make ur phone in bot screen
put ur phone in the cradle(with the power supply, so that ur bat will not drain).
usb should be in the display and not serial
make sure the 3 files(ms_ , radio_ , and nk) are in the same folder with himaupgrade.exe
run himaupgrade.exe
Wait about 5 processes i think. after the pc will let u know if it is done... get ur xda from the cradle and hard reset it (power button+reset button)...
if it doesnt work still im sory, im just a newbie, i just did mine.... maybe u should read more...
shane said:
shane said:
Hi,
My XDA II was up and running until I wanted to flash it with Wm2003se.
I not sure if the battery is fading out or what but the flash didn't conplete and I am left with the "serial 1.06 boot screen" I have tried numerous times of taking out the battery, letting everthing drain out and trying again. but it still goes back to the serial screen. Also activesync won't recognize the device and Windows XP picks it up as "Unknown Device". When I try and reflash it, I get the "communication error". Could someone dump thier Rom and/or instruct me on how to flash my device using my SD card?? Or if there is another way to revive my XDA II, I am open to anything. Thanks!!
Shane
Click to expand...
Click to collapse
Come on....Somebody help us, we have a crisis club going on here!!!
Click to expand...
Click to collapse
I assume you did a hard reset?? In the past three days I have gone from Windows Mobile 2003 >>> Windows Mobile 5 >>> back to Windows Mobile 2003 SE (SIN's magic version available here on XDA-Developers) which I like best of all (for many reasons, mainly speed and reliability). As someone else stated, you need to put it in the cradle AFTER deleting the old profile in ActiveSynch on the PC. Oh, and make sure you are using ActiveSynch 4 or higher. This is now available from Microsoft's site. :idea:
i need help...i have been reading for the past 2 day..finally give-up......i have a xda..rom ver..3.14.03eng
rom dat..09/27/02
radio ver..6.12
protocal....324e4
i need unlock to used with t-mobile...because att is closed in my state....
i am using sd card to install SPromv1.2.......
i download spromv1.2 from this site..copy to a sd card..insert sd card ..do the hard reset..it boot back up and go through the process of allign screen..and do the stylus thing....till say simlock....what did i do wrong or did i miss any step...thanx for ur time
Looks like you do not install the ROM.... ;-)
After downloading the Special ROM you have the file in exe format. Since you have currently a "good" Rom installed, just connect your device via Actve Sync and run the exe fiel on your PC....
Follow the instructions,. that´s all.....
Stefan
i don't have ative sync...this just a phone i just need to unlock...but if u can post link to dowload ative sy...thanx for ur time....sooooo basicly u have to synco ur device to ur PC for able to run SPRomv1.2 on ur pc?? also..i looking at xdatool...follow the instrution using the bootloade+osimage....??? what do u think ..thanx agian for ur time
Just search Microsoft fot ActiveSync or the ftp server here. Should be available at many locations.....
You require ACtvice Sync to be able to flash the ROM via Cable.
Other way i described in a short way is explained here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
thanx for ur time stephen...let u know how it turn out when i unlock it..........
thanx stephen...i have sucesfull unlock now...but i can not sycony my xda to my computer anymore?.....i got 2 xda ..i try the other 1 too...it would not sycony or connect to my PC..help?.....i was connect at forst then i do the SPromv 1.2 then right now every time i put the phone on the cradle...sycony with turn green and disconnect my unit agian...help...
Dear All master,
I need help on my o2 Atom, when I upgrade it to latest version, it stop on stage 5: Burn in Radio Rom, 0%. Nothing happen even I had to wait for 1 hour.
I upgrade it with original atom rom from o2 site : 'Xda-Atom-ENG-20060426-MOT0822.exe'
The device stay in "O2" screen. this device can switch to diagnostic mode.
what should I do?
Note I repeated loading rom but Ietunai problem in Flash
Probably the Radio Hardware broken.... try to install without the Radio ROM.
sliders7 said:
Probably the Radio Hardware broken.... try to install without the Radio ROM.
Click to expand...
Click to collapse
from wher i can find that rom ?
or can u upload it ? for me plzzzz
http://pdaviet.net/showthread.php?t=17158
you can find how to flash rom without bootloader, extended rom , radio.
read my first post
medkid said:
http://pdaviet.net/showthread.php?t=17158
you can find how to flash rom without bootloader, extended rom , radio.
read my first post
Click to expand...
Click to collapse
but my phone is dead and it fail when i try to unpgrade it and it gave this eorr ===
!!!Please use DSUU in OS mode and syno with PC first !!!
usb transfer fail.
what shoud i do now plzz help me i dont know how to get it in DSUU mode its gose on boot loader but cant get it in to DUSS MODE
my Xda Atom Exec o2
waseemraj said:
but my phone is dead and it fail when i try to unpgrade it and it gave this eorr ===
!!!Please use DSUU in OS mode and syno with PC first !!!
usb transfer fail.
what shoud i do now plzz help me i dont know how to get it in DSUU mode its gose on boot loader but cant get it in to DUSS MODE
my Xda Atom Exec o2
Click to expand...
Click to collapse
u can't update using DSUU from activesync anymore. since u got broken ROM.
u must use Bootloader by pressing:
-power + camera + reset
-plug the USB
-start the update using DSUU.
sliders7 said:
u can't update using DSUU from activesync anymore. since u got broken ROM.
u must use Bootloader by pressing:
-power + camera + reset
-plug the USB
-start the update using DSUU.
Click to expand...
Click to collapse
i just do as u say but the but it fail gives the eorr as i told in my last post
and plzz tell me is i just have to get it in bootmode and conact it with usb and start updating
what is DSUU?? is this the file Xda-Atom-Exec-ENG-20060721-MOT0822 ? or what ?
Easy fix, check post #12 http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=EBOOT
more than likely you will need a 256 or 512MB SD Card, the method discussed here (in most cases) will not work with higher capacity cards. Check the Atom Wiki too.
homer285 said:
Easy fix, check post #12 http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=EBOOT
more than likely you will need a 256 or 512MB SD Card, the method discussed here (in most cases) will not work with higher capacity cards. Check the Atom Wiki too.
Click to expand...
Click to collapse
i tryied that too but still same postion.....
what shoud i do now plzzz help me i tell u again what it look like
====================================================
USB connected,waiting for download ..............
!!!Please use DSUU in OS mode and syc with PC first!!!
Usb Transfer fail
some one plzzzz help me ? for my atom exec
waseemraj said:
some one plzzzz help me ? for my atom exec
Click to expand...
Click to collapse
well...
after u see bootloader screen and waiting to download.
it should be ok to connect to USB and PC will recognize it for sure!
if doesn't... u should try different computer. not yours. just borrow somebody else computer... see the outcomes? just in case u got error/corrupted activesync.
if still not working... u must using SD card upgrade.
Use any ROM.. use WM5 Official ROM.
Extract the ROM.
put: diskimage_Ver.nb0 to the Blank SD card (use 512MB or 1GB)
and activate the bootloader again.
If your device are normal.. it should looking for SD card and start installing the ROM. If your device badly damage.. it will NOT run both method.
i don't know this is your hardware or Software are damage.
Maybe u should send it to the repair... hopefully u still got the warranty.
If Hardware is the problem, usually they replace the motherboard.
because no way to fix NAND memory module.
just keep trying... don't try one time only...
Good Luck & Pray!
sliders7 said:
well...
after u see bootloader screen and waiting to download.
it should be ok to connect to USB and PC will recognize it for sure!
if doesn't... u should try different computer. not yours. just borrow somebody else computer... see the outcomes? just in case u got error/corrupted activesync.
if still not working... u must using SD card upgrade.
Use any ROM.. use WM5 Official ROM.
Extract the ROM.
put: diskimage_Ver.nb0 to the Blank SD card (use 512MB or 1GB)
and activate the bootloader again.
If your device are normal.. it should looking for SD card and start installing the ROM. If your device badly damage.. it will NOT run both method.
i don't know this is your hardware or Software are damage.
Maybe u should send it to the repair... hopefully u still got the warranty.
If Hardware is the problem, usually they replace the motherboard.
because no way to fix NAND memory module.
just keep trying... don't try one time only...
Good Luck & Pray!
Click to expand...
Click to collapse
The above information will likely do more harm than good!
waseemraj said:
i tryied that too but still same postion.....
what shoud i do now plzzz help me i tell u again what it look like
====================================================
USB connected,waiting for download ..............
!!!Please use DSUU in OS mode and syc with PC first!!!
Usb Transfer fail
Click to expand...
Click to collapse
Bro I have recovered from this 20+ times, if its not working (and you can enter bootloader mode) then you're doing something incorrectly, either that or your memcard is incompatible, remember in most cases 256 or 512MB are the only working sizes! So place that EBOOT.nbo into and "empty" SDCard with your PC, enter the bootloader then stick the card in.... It wont take long, once you the screen goes black pull out the SDcard and then enter bootloader, plugin your USB and execute official O2 rom AKU2.2
The flash may not finish completely freezing in the Extended rom update, dont panic! unplug, softreset then flash in DSUU mode...easy as! works every time!
homer285 said:
Bro I have recovered from this 20+ times, if its not working (and you can enter bootloader mode) then you're doing something incorrectly, either that or your memcard is incompatible, remember in most cases 256 or 512MB are the only working sizes! So place that EBOOT.nbo into and "empty" SDCard with your PC, enter the bootloader then stick the card in.... It wont take long, once you the screen goes black pull out the SDcard and then enter bootloader, plugin your USB and execute official O2 rom AKU2.2
The flash may not finish completely freezing in the Extended rom update, dont panic! unplug, softreset then flash in DSUU mode...easy as! works every time!
Click to expand...
Click to collapse
Confirm!!!
I have done this also even using 1 GB memcard, my memcard is NCP mini SD.
I don't know it was lucky or it does work for 1 GB memcard. Even with non empty one.
But becareful, maybe I am just lucky, perhaps you should use 256 MB or 512 MB only.
homer285 said:
The above information will likely do more harm than good!
Click to expand...
Click to collapse
hei... he is desperately need help.
We all want to help him, thats all i can offer.
If you have different method.. thats a good news for him.
everybody here try to help him.. contribute something to help him.
so no more harm to his already broken device.
think the brighter side!
cheers
i search for it but i can't find it
i want to flash my rom but if i go the splash screen en i run on my pc the rom update it goes to de gray window and i see 0% and nothing happend
can anybody help?
thanks tom
reading wiki is really hazardous to our health.
make sure ur device hv HardSPL installed.
Put ur device in bootloader mode, flash the rom.nbh file using raphael ruuwrapper.
Look at this:
http://htc.back2basic.shacknet.nu:8084/
There you can find a Dutch manual about flashing your TP.
thanks for your help
but it's also not working
the hardspl works but untill the gray screen is still on 0% and never go to 1%
HELP :S
tom1687 said:
thanks for your help
but it's also not working
the hardspl works but untill the gray screen is still on 0% and never go to 1%
HELP :S
Click to expand...
Click to collapse
Dear friend,
Use the fastest, simplest and safest method:
1. Flash Hard SPL
2. Rename the nbh file of the desired ROM after RAPHIMG.nbh
3. Copy it to the root of your SD Card
4. Enter bootloader mode [press vol. down and soft reset]
5. Follow on-screen instructions
Good luck and cheers.
hello Kevlar-Source
i have found the problem i can't flash with windows vista it dont work now have i done what you say on the storage cant and flash ik whit windows xp and it's works
thanks
PROBLEM SOLVED
did u follow the steps exactly? also make sure to remove sim card before flashing hardspl.
Works with Vista, no prob!
What i did wrong, was that the folder was not empty with just the loader and rom... Took me a while
I hope you take the manual by the letter, you should be able to upload the rom. You must also use a USB-cable to flash the phone! Don't forget to have the "Mobilitycentrum" open.
Daneels said:
You must also use a USB-cable to flash the phone!
Click to expand...
Click to collapse
Just to quote George Cooney: "What else?"