hi, i have installed tomtom 5.0 but i cant pair my gps bluetooth(sysonchip). I worked with tomtom3.x and 4.x. When i launch tomtom and try to setup the gps, i only can bound with com2, 6, and 9. Any idea?
I have had the same problem with TomTom and Oncourse Navigator 4.2, I believe it is an incompatibility problem with WM2005. I tried using the built-in GPS manager in WM2005, but I do not think it is working in this version, or it will only work with newer GPS porgrams compatible with 2005.
Solved¡¡¡
The problem is TomTom list only the ports that appears in HKEY_LOCAL_MACHINE\Drivers\Active but when you create an outgoing port (with the BT applet), it isnt included in this list. I ve create a little C program (5 kb) that include the port com5 manually, so Tomtom can see it and you can Select it. I ve put a link to this program in windows\startup to be executed after each reset. Now it works ))
If someone need it i can post it....
YES! Post it here, please ...
Thanks in advance.
Hi, This is the way it worked for me.
1) Create a outgoing port (5) to connect with the gps
2) Place the patch in \windows\startup (to be executed each time you reboot).
3) Reset the device.
4) Run tomTom, select "other gps bluetooth". Then you should see "Port 5".
If you need a diferent port tell me and i will recompilate the program or i will post the source code.
tomtom 5 doesn't install, program crashes.. tried 2 install the cabs... only ttn.cab gives a failure on install, the other cabs installed corectly.
how did you install 5?
follow this
http://forum.xda-developers.com/viewtopic.php?t=22706
dherrero, you are a genius! This has been driving me insane.
I have just downloaded your patch and sprinted to my car to try it and it worked immediately!
You are wellcome.....
dherrero said:
follow this
http://forum.xda-developers.com/viewtopic.php?t=22706
Click to expand...
Click to collapse
tnx , works great!!
Brilliant!
Strangely enough, the patch still keeps working if you run this patch once, then delete it.
Doesn't look like you need to put it in your windows\startup directory.
yep, when tomtom bounds to the gps in port 5 (or other) it retains the port number.
Anyway keep the patch in your sd card (or other safe place)because you may need it if tomtom "forgets" the port
If i install it from the CD, the setup is crashing
If i copy the .cab "ttn.CAB" (2.58 mb) and copy it to the device and open it he say's: "Unpacking was unsuccesful"
Someone?
dherrero said:
follow this
http://forum.xda-developers.com/viewtopic.php?t=22706
Click to expand...
Click to collapse
Hi AkTje. See link above.
It was posted already
HI,could you explain me why I cannot install tomtom 5 from the cd to the qtek2020 with WM2005???
I receive this error:
"the memory 0x000..... cannot be read"
Backlight goes off, can change???
Check this link
http://forum.xda-developers.com/viewtopic.php?t=22660&start=0&postdays=0&postorder=asc&highlight=
Does someone know how to install the voices on TT5?
AkTje said:
Does someone know how to install the voices on TT5?
Click to expand...
Click to collapse
just create a folder in Mydevice and call it Voices and copy the voices here :wink:
Ciao
If you dont want all 28 voices.
just copy voice (00.chk)(01.chk)Etc.
To your device
mydocuments/tomtom/
TheHat
Related
New Voice Dialer++ (MS Voice Command 1.5 Is out)
1.5 is free to download for users of 1.0 & 1.1
go get it now :twisted:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
iggy said:
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
Click to expand...
Click to collapse
I've been trying all day and cant get the darn thing to download I keep getting
Service Unavailable
The server is temporarily unable to service your request. Please try again later.
Any chance of sending me the file ?
Just tried it and it again and it worked. I would be happy to send it if needed, do you have an email that can handle 5.5mb attachments?
Yes please please mail it to [email protected]
Many Many thanks
I tried this on my XDA II with the 2.06 2003SE ROM and found a problem - could someone else let me know if they have the same problem...
After installing I reset my device. After the reset, I found that I couldn't select any of my other input panels other than the default Block/Letter recognisers or the built in keyboard. IntelliPad (Phone Pad) and MessageEase were in the list but when I selected them it just switched to the default keyboard.
Can anyone help?
I've found the same problem with Intellidialler but finally managed to get Calligrapher working and never drew the connection with voice command. On top of that, there was an error the first time I tried the 1.5 upgrade setup and now if I try setting up 1.5 again it states that "No previous version of Microsoft Voice COmmand US PPC 1.50 was not found on this machine. The setup cannot continue" (yes you read the double negative right it's not a typo) I've tried uninstalling 1.0 and 1.5 and reinstalling to no avail. If anyone has an idea about either of these problems please share...
Hey pole_vaulter1,
I had exactly the same problem (No previous version etc).
It can be solved by copying the .cab file in c:\program files\microsoft voice command\ onto your xda\imate\mda and running the cab file from there.
Hope this helps.
Craig.
Craig,
Thanks a bunch - worked perfectly. I really should have thought of that myself but I suppose that's what a forum is for. Now if I could only get my Tengo and Intellipad to show up instead of the keyboard it would be perfect (until the next upgrade,tweak, software, etc.)
THANKS,
Travis
Craig,
in my case the installer does not create the \program files\microsoft voice command\ directory. Can I extract the cab file from the msi?
G'day Eddy,
I'm assuming you have 1.0 or 1.1 installed on your ppc.
Do you install files to another location? The file that went into the directory I mentioned is ... "Microsoft Voice Command.PPC420_StrongARM.CAB". You might be able to search your pc for that file?
As for extracting the cab from the msi - no idea sorry
Hope you find it.
Craig.
Craig,
no, I did not have version 1.0 nor 1.1. I got the impression that you installed without a previous version.
G'day Eddy,
No, I had the exact same problem as Travis a couple of posts up where I installed the upgrade, it gave me an error at the end of the setup on my ppc saying I already had voice command already installed (even though you had to have it installed for the upgrade to work) so I uninstalled it on my ppc - soft booted it to make sure it wasn't still resident, tried to re-install it and it gave another error saying that I didn't have the necessary software installed (version 1).
I'm not sure if you can buy version 1 of the software anywhere anymore but from other posts, apparantly handango will only let you buy it if you are a US or Canada resident.
Sorry for the bad news for you.
Craig.
Cab file MSVC 1.50
I found the cab file. Just copy it to you're device. :lol:
Dutchie,
could you mail this cab file to me or did you extract from the msi file?
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
No Wifi or Wordlogic after MSVC :-(
SH..... no WIFI or Wordlogic after I installed 1.5. I uninstalled it, and they work again. Anyone having the same problem with Voice command??? :?:
Does 1.0 the same??
I had quite a few problems after installing Voice Command 1.5. MS Reader would not run (out of memory error) and Calligrapher would not work either (still apeared in the bottom right) but only keyboard would load when Calligrapher chosen.
If I disabled Voice Command 1.5 (as opposed to removing it) everything was fin again.
From another forum I found that the problems I was experienceing was related to plugins in the Today screen (I had the Sprite monitor programming running). When this was removed, Calligrapher kicked back into life and Voice Command 1.5 worked fine.
MS Reader still gave the same out of memory error, but I found that if I added a shortcut in the Startup directory for MS Reader and made sure it loaded first then it would work fine after that.
Hope this helps
Mike
NinjaDonkey said:
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
NinjaDonkey said:
...do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
Interestingly, I have a similar problem, but I haven't touched MS Voice Command. I've had to make Intellipad my default input method, even though I use Fitaly more often. Once I change from Intellipad to anything else, I can't go back to Intellipad, or anything else, for that matter...
tomtom is the only thing stopping me for to go to magneto
i tried it for a while its nice but i need my tomtom
if you know a way for using it ?
please no other soft sugestions because for the moment
my budget is to low for buying something new
TomTom 4.40 is working perfect under WM 5
TomTom3 + Magneto
Hi,
when i try to install TT4.4 the installer crashes!
What can i do about that?
best regards!
Re: TomTom3 + Magneto
Dodger said:
Hi,
when i try to install TT4.4 the installer crashes!
What can i do about that?
best regards!
Click to expand...
Click to collapse
I was also having the same trouble with the installer. Setup.exe kept on crashing. So I resorted to installing the program off the pda.
What you need to do is copy the following files to the pda:
wzd.cab
voice.cab
ttn.cab
gps.cab
Then run each one off the pda and the program should then be installed.
To install the maps just go through the setup to install it onto the storage card.
Oh and if you encounter the backlight problem whilst running Tomtom then you will need to press the "Red Disconnect Call Button" so it can be minimized, you will then need to go into the backlight settings and readjust them accordingly.
Good Luck!
when instal 4.40 i wont take my key
any suggestions ?
yeah, you could buy it instead.
any solution for backlight problem with tomtom 4.40 ?
Problem of backlight
Explore Cd Tomtom 4.40 to go in the folder voice then to take the files voice04.cab and voice05.cab (are the English voices UK) Initially to put it to Program Files for example then to launch the cab since to this folder (Program Files) in your pocket PC
Voice11 and Voices12 (are the french voices)
This procedure corrects the problem of backlight
what do you mean ?
if you install a voice the backlight problem is gone ?
In my case that corrected the problem
I had this problem of backlight
During installation of files wzd.cab ttn.cab gps.cab
and for my part after to have installed the file voice 11 and Voice 12 .cab (women and men french voices) the backlight error disappeared
That was the good solution in my case
The backlight is automatically returned and work good after voice.cab installation
So I suppose that the 4 cab files describes above must be all present so that tomtom 4.40 run correctly
But it's not the same problem for everyone
Dutch Voice Cab files
Hi everone,
Does anybody knows the numbers of the dutch voice.cabs.
:?:
Greeting from holland
Re: Dutch Voice Cab files
[email protected] said:
Hi everone,
Does anybody knows the numbers of the dutch voice.cabs.
:?:
Click to expand...
Click to collapse
can someone upload one ? or a download link :roll:
TomTom 4.4 filestructure
Hi,
First: thanks Nightspider and Dherrero for your tips!
it's hard working, but thanks to your tips TomTom 4.4 is beginning to work
on my XDAII.
I had to put the Benelux.CAB on the Storagecard. Only then it would install.
But I've ran into another problem, it says now "no maps found"
I suspect this have to do with the name and/or the place where you put
the directory with the maps. Can anyone who has a working TomTom 4.4
tell me the exact names of the directory, where the are and what files are in them?
TIA
Re: Dutch Voice Cab files
Hi Everyone,
When you want Dutch language you need to install the following cabs
voice14.cab = "Bram" a male voice
voice15.cab = "Eva" a female voice
voice16.cab = "Nora" i think (not tested)
Now the problem is where to put the Benelux map.
Greetings [email protected]
TomTom 4 Benelux map
I've found it!
Put the Beneluxmap in \Storage Card\.
During executing Beneluc.cab it was stored on
\Storage Card\My Documents\Benelux.
So you have to put the Benelux map in the root of Storage card!
TomTom 4 activation
Damn, now the bloody thing is asking for the activationcode.
Anyone?
TomTom 4 activation
Thanks for the solution.
I installed the map with a cardreader.
Works as wel
But i get the same activation problem
TomTom 4.40
Sorry,but 4.40 tom tom italian language with wm2005 blacklight doesn't work anyway
I have the same problem like Venom...
We need same help!!
TomTom 4.40
Same problem with the Dutch Language.
Pressing the hangup button and then go to the power settings to chance the backlight, solves the problem for the time being.
But i prefer a solution that works ever time.
Any can help us
The installer crash when it is going to copy the files and if i copy ttn.cab and i tap it the result is "Instalation of ttn.cab was unsuccessful. What can i do? thanks
magneto
I am using Mangeto....
Hi dherrero,
I had the same problem and downgraded to WM2003SED.
With WM2003SE it works perfect
I dont want to downgrade and tomtom 4.40 works well with magneto. What is happening??
I don't no.
Because i can't figured it out and i need TT i downgraded to WM2003SE.
When somebody knows that it wil work i upgrade again.
Maybe others can help you. :?:
Good Luck
You can copy the files out of the cab files and manually place them in the required directories, here a list of the files from the (ttn.cab) and where they go
Program Files\Navigator\data.chk
Program Files\Navigator\TomTom Navigator.exe
My Documents\TomTom\CurrentMap.dat
I use WinCe Cab Manager to extract the files
Hope this is of soem use!
Dogo
Thanks It works...
Activation Codes for Tomtom5 UK map
anyone have a code or work around for this??
How do you get tt5 to recongnise you have another map on the SD card???? anyone ????
It must be a map specific for tomtom5.0. Older maps doesnt work in tomtom5
Tomtom5 crashes continuesly..
And when Tomtom is installed and I want to sync my device in my cradle, device.exe en gwes.exe will crash also and need to softreset before sync will work again.
I deinstalled all tomtom components, and sync'n will work flawlessly... but after unpacking the cab files and start Tomtom Navigator.exe I'll get the same problem again..
In which order did you install the cabfiles?
edit: Older maps seem to work with tomtom5; all you need to do is edit the apn file in the old map folder and change the last number (map version) to the version of the tomtom5 you've got.
can't select voice, although i installed several voice cabs...
tom does not recocnize the voice file, but it is there (\tomtom\dataXX)
voice does work on wm2003
tomtom 5.0 crashes
Yes, tomtom 5.0 crashs sometimes. In my case, when i try to manage witch poi's categories to see in the map the sometimes it crash. I dont know if the problem is magneto or tomtom 5.0 but tomtom4.4 worked well. I hope tomtom releases a fix....
Bstard said:
can't select voice, although i installed several voice cabs...
tom does not recocnize the voice file, but it is there (\tomtom\dataXX)
voice does work on wm2003
Click to expand...
Click to collapse
hi, all
same problem as Bstard
@Bstard
have you solved ?
Regards.
tomtom 5 solved
i've heard that you can copy tomtom 3 poi.dat from old map to the new one, and although you don't get the new pois stability problems go away.
voice files cab install
dogo said:
You can copy the files out of the cab files and manually place them in the required directories, here a list of the files from the (ttn.cab) and where they go
Program Files\Navigator\data.chk
Program Files\Navigator\TomTom Navigator.exe
My Documents\TomTom\CurrentMap.dat
I use WinCe Cab Manager to extract the files
Hope this is of soem use!
Dogo [/quote
What about the voice fies? How to install?
Click to expand...
Click to collapse
Re: voice files cab install
What about the voice fies? How to install?
Working on this, but for the life of me i cant get TomTom to see any voice files
Dogo
Re: voice files cab install
dogo said:
What about the voice fies? How to install?
Working on this, but for the life of me i cant get TomTom to see any voice files
Dogo
Click to expand...
Click to collapse
Ok got mine working heres what i did!
I Copied data05.chk & engf.vif to My Device/My Documents/TomTom
All working fine now, I Had no luck with the ROM Version 1.50h.00WWE, TOMTOM Kept crashing, now using ROM Version 1.50g.00WWE
Now looking for a fix to the backlight keeps switching off
dogo
Voice solution for tt5
Just create the Voices folder in mydevice and copy the voice files here :lol: :lol:
ciao
TTN5 using older maps...
Krypt,
You say all you need to change is the pna file? I have some TTN2 USA Maps and have changed the .pna file to 562 and it still only finds my Great Britain TTN5 map.
Any advice?
Please can anyone send me the dreaded patch for my ipaq 3115 / bt77 gps receiver that wll let me use tom tom 5.
thanks in anticipation.
Dave
is it this one ? I'm not sure....
Ipaq port 5 problem using BT77 gps receiver
Thanks for the patch. I have run this file but unfortunately it did not help.
I have run this file over a previous patch I had downloaded from the forum. Although they have different file names the message displayed was that I had already update the tom tom application and did I want to reinstall which I did.
Am I doing something wrong? The patch I think I need is the one that goes into the ipaqs startup folder.
I have tried all of the other fixes i have found with no success.
I use this one for my MDA II, it also makes com 5 visible to TT5. Maybe it works on ipaq ?
Hi, Ive just installed TomTom 6.010 on WM6, but I can never get a GPS signal.
If I go to configure my GPS device in TOMTOM, which type of receiver do I select? The NMEA GPS? (I'm assuming this is COM5:9600, too)
Please help lol
Mines set up as:
Other NMEA GPS reciever
GPS Baud Rate 57600
Com 4
and Tomtom 6 works perfectly.
I had to use the tomtom 6 patch listed in an earlier post as my tomtom wouldn't work under Win Mobile 6, have you had to do the same.
It takes 5 to 10 minutes to find GPS signal some times (spesialy for the first time)
On some ROM versions it is immidiate. experiment...
My Com port is 0, but before i pair it with my HTC.
I use original Tom-Tom GPS
Optika said:
It takes 5 to 10 minutes to find GPS signal some times (spesialy for the first time)
On some ROM versions it is immidiate. experiment...
My Com port is 0, but before i pair it with my HTC.
I use original Tom-Tom GPS
Click to expand...
Click to collapse
Excuse me, but I'm a bit confused...what exactly are you pairing with the HTC? The GPS?
Why are you using external BT GPS instead of the internal one? is it due to low satellite reception?...cause I do this as well, since I have sun shields on my car, and the BT GPS is placed on the shield on a clear location where the reception is much better.
The internal is mapped to Port 4, but actually it is on Port 5.
cheers thanks. works great now
i havent had to update tomtom at all yet, but im not using a particularly kosher version *ahem* (although i do have a tomtom 6 lisence, just not for the maps im using)
If you run QUICK GPS BEFORE opening tomtom it finds the satellites pretty fast (at least for me). If I do not run it tomtom takes a long time to locate the satellites.
mcwtrekkie said:
Hi, Ive just installed TomTom 6.010 on WM6, but I can never get a GPS signal.
If I go to configure my GPS device in TOMTOM, which type of receiver do I select? The NMEA GPS? (I'm assuming this is COM5:9600, too)
Please help lol
Click to expand...
Click to collapse
you should be using the update 6.030 for TomTom 6 with devices with internal GPS
walshieau said:
you should be using the update 6.030 for TomTom 6 with devices with internal GPS
Click to expand...
Click to collapse
I agree - it is much more reliable like that.
walshieau said:
you should be using the update 6.030 for TomTom 6 with devices with internal GPS
Click to expand...
Click to collapse
?? well i have 6.0.10 and it works beside the fact that the menu is not visible (but clicking opens the settings box etc).
The main question i have:
How can i add an additional map manually? I have GB + major roads of WE. I have France maps. Just copying is not enough... so what else can i do?
doncsunny said:
?? well i have 6.0.10 and it works beside the fact that the menu is not visible (but clicking opens the settings box etc).
The main question i have:
How can i add an additional map manually? I have GB + major roads of WE. I have France maps. Just copying is not enough... so what else can i do?
Click to expand...
Click to collapse
You should only have to copy the map subdirectory (probably called France for this map) into the root of your SD card and Tomtom will be able to find it.
Location of TomTom 6.x patch for Windows Mobile 6?
A search of this forum does not seem to reveal the location of the latest TomTom Navigator 6.x patch that allows said software that I just purchased to run on my newly purchased x7501, which has the Windows Mobile 6 2.19 ROM code flashed.
What / where is the latest TomTom 6.x patch?
Is there a later, proven, "better" 2.x WM6 ROM available?
Alternately, what tools are used to develop the ROM flash code and application patches?
Thanks,
Tom
[email protected] said:
A search of this forum does not seem to reveal the location of the latest TomTom Navigator 6.x patch that allows said software that I just purchased to run on my newly purchased x7501, which has the Windows Mobile 6 2.19 ROM code flashed.
What / where is the latest TomTom 6.x patch?
Is there a later, proven, "better" 2.x WM6 ROM available?
Alternately, what tools are used to develop the ROM flash code and application patches?
Thanks,
Tom
Click to expand...
Click to collapse
If you're looking for tools there is a section within the forum for this and you can also check multiple Wiki pages.
TomTom 6.x works well on my Athena running WM6. Never had to install a patch to get it to work.
ltxda said:
If you're looking for tools there is a section within the forum for this and you can also check multiple Wiki pages.
TomTom 6.x works well on my Athena running WM6. Never had to install a patch to get it to work.
Click to expand...
Click to collapse
To add to that, I normally do not do any settings. I just install after every flash and start the program and leave device near my window and go off to have a coffee. After several minutes it sees the sats, and maps etc. That is it. The rest is automatic the next time I start and goes faster.
Alway s have the maps and voices folders installed (copied) to card.
apd said:
You should only have to copy the map subdirectory (probably called France for this map) into the root of your SD card and Tomtom will be able to find it.
Click to expand...
Click to collapse
if i don´t have sd card the tomtom 6.030 don´t works ??? i installed on microdrive but don´t find the maps ???? any idea??? thanks
Its cause your copy of TT6 (6030) isn't correctly hacked to allow the use of the maps you have.. Try another mod/hack
No success
I am having no success installing TomTom Navigator HOME 6.010 on my x7501, which has the 2.19 WM6 ROM flash.
I have unsuccessfully tried twiddling the user interface settings that seem as if they may affect the outcome.
When executed on a laptop running Vista, without WM5torage, the installation program does not recognize the x7501 as a valid installation location. Attempting installation while running WM5torage 1.75 causes a WM5torage hang and the x7501 needs a reset to connect to a laptop running Vista, and results in a "<file name> not found" error message after WM5torage ceases functioning. One file might get copied, most often none get copied successfully.
Installing from various locations and combinations with the ppc cab file results in a "Installation of <cab file> failed" message, to the system, microdrive and/or the 4GB microSDHC card.
Though new to the xda and mobile device space, I am reasonably experienced otherwise. As painful as this might be for both of us, please tell me, step by step, how you successfully installed TomTom Navigator HOME 6.010 onto your x7501. Please do not assume anything, as I have likely missed something simple. I would need to know the versions of software used, e.g. ROM, WM5torage, Navigator.
According to the TomTom web site, Navigator 6 on WM6 is not supported.
Thank you,
Tom
Someone has another version here. You need legal maps to use
http://forum.xda-developers.com/showthread.php?t=322243
[email protected] said:
I am having no success installing TomTom Navigator HOME 6.010 on my x7501, which has the 2.19 WM6 ROM flash.
I have unsuccessfully tried twiddling the user interface settings that seem as if they may affect the outcome.
When executed on a laptop running Vista, without WM5torage, the installation program does not recognize the x7501 as a valid installation location. Attempting installation while running WM5torage 1.75 causes a WM5torage hang and the x7501 needs a reset to connect to a laptop running Vista, and results in a "<file name> not found" error message after WM5torage ceases functioning. One file might get copied, most often none get copied successfully.
Installing from various locations and combinations with the ppc cab file results in a "Installation of <cab file> failed" message, to the system, microdrive and/or the 4GB microSDHC card.
Though new to the xda and mobile device space, I am reasonably experienced otherwise. As painful as this might be for both of us, please tell me, step by step, how you successfully installed TomTom Navigator HOME 6.010 onto your x7501. Please do not assume anything, as I have likely missed something simple. I would need to know the versions of software used, e.g. ROM, WM5torage, Navigator.
According to the TomTom web site, Navigator 6 on WM6 is not supported.
Thank you,
Tom
Click to expand...
Click to collapse
I had a similar problem installing the retail/downloaded copy of TomTom onto my device. I called TomTom support and they couldn't figure it out. I eventually figured out where the installation files were, extracted them and moved them over to my SD card. Then I installed them from there without any problem. I asked tech support to document the procedure I implemented to get this done in case they have other people with the same problem. Hope this helps. I'm slammed with work now or else I would look to see which files I used and post the info. I'm sure if you're familiar with installing CABs from the device you'll be able to tinker around a bit and find them. One thing I remember is that I had to extract the CAB on the CD or DVD before I was able to access the actual installation files. The first CAB is the archive and the CABs inside the archive are the installation files.
6.030 officially out-
Actually, Tomtom has officially released this update...
http://www.tomtom.com/support/product.php?ID=1401&Language=4&query=update&FID=6814
Basically, d/l the latest version of TT Home, insert your mem card or connect the device (mem card only 4 Vista), and click the D/L button on the above page.
Then follow the instructions. If it doesn't install, then you can manually pull the
cab file from:
(C:\Users\XXXX\Documents\TomTom\HOME\Downloads).
Then open with Winrar, and extract the ttn.cab file located in the 2577 folder.
Transfer to the card/device, run it, and you should be good to go.
Last note: Palm has an official update available on their site here:
http://www.palm.com/us/support/downloads/gps_nav.html
which appears to be the same exact file (same size).
Hope that helps...
hey guys i just want to copy the tomtom map to the microdrive via activesync but when trying to copy cline.dat i have an error what can i do to copy this file to the microdrive?