1) I Have a back pac: CF type II +VGA output, The VGA is working 100%
But the mini drive 2,2GB disapperred in the 1,50fWWE or 1,50gWWE??
2) En solution for MMS?
3) flight mode ok, with radio 1.17
Related
What ever I try I can not get my Globalsat BT GPS working in Alturion 5.3 with i-mate 1.72. However I can see the responce of my GPS blue LED when I switch on Alt. with the correct com setting!
I tried e.g. hard-resets with/without WM installation of com5, with/without BTHTools installation of com7 and any combination (all with fresh Alt. installation, no other applications)
Beam "receive all incoming" is always off
TT3.03 however works fine in all conditions (installed after I try Alt.) with settings: SiRF Bluetooth/Bluetooth GPS
If anyone has Alturion 5.3 working with 1.72 ROM please let me know the details of your config e.g.:
- version of Alturion (I have 5.3.1.4 and don't trust some updates)
- BTHTools version/ port
- WM com port
- what GPS
- any special utils
or anything else you think is helpfull to try
Anyone knows if TT "SiRF Bluetooth/Bluetooth GPS" works via the serial port or does this somehow works differently???
Thanx for any suggestion.
Ronald
I have Alturion 5.2 and its working for me with bluetooth gps with noproblems where you get update to 5.3 i use without any utilits 1.72 suport serial com
MDA II T-Mobile
ROM 1.72.00WWE 03/15/04
Radio ver 1.14.00
Protokol ver 1337.24
ExtROM 1.72.126
GPS Bluetooth Blue-i
1.you hawe to pair bluetooth (com port 5 in bluetooth settings)
2.restart MDA2 and bluetooth
3install Alturion
4start bluetooth
5start Alturion and setup com 5 and its working for me
good luck
Thanx for the info lou
I have exactly the same ROM like yours !?. Is your "i-blue GPS" a SiRF II type?
The 5.3 upgrade you can download from www.alturion.com with this exe http://www.alturion.com/update/AlturionAutoUpdate21.exe It probably only works if you are a registered user.
Ronald
http://www.bluegps.com/
here its info about my bluetooth gps
I have 1.72 and Alturion PRO 5.3.
My Bt antenna is Emtac.
It works fine in this configuration.
When you make your connection to the BT antenna , do it through the bluetooth settings on your qtek where you activate the COM5 outbound. Then bond your device with the antenna.
it should work then.
before the upgrade my v1605 at rom schap's 354b (ita version) with radio version vodafone 1.32.00.00 my device working with usb only for charging .
In activesync (4.5 from PC) the connection is : >>*USB <<. It's normal ?
Sorry for my english.
I have the same issue.
It's a DHCP pb.
I think that is due to this firmware.
Il will upgrade my phone this night and we will see.
Uncheck "Enable advanced network functionality" in Setting/Connections/Usb-to-PC
Solve probleme for me
I couldn't manage to get my Prophet with the WM6.1 Shadow 2.0 TE acting as a Modem.
Is there any driver for XP or Vista to connect to our recently upgraded tool and use the GPRS connection? (USB or Bluetooth).
Thanks in advance.
Hi,
my Niki is not charging from USB, nor recognized by PC.
Orange led (charging) is on, WM battery meter says 'charging', but not charging.
Tried with 2 different batteries. Those charge perfectly on an external battery charger.
Blueetooth doesn't work properly. It can see other BT devices, fetch services, but only shows 'serial port' and 'handsfree' while on other WM devices, I can see Obex file transfer, PAN,...
Rom version: 1.31.412.09
date: 10/30/07
Radio version: 1.58.16.27
protocol version: 25.61.30.03H
R: 1.58.16.27
G: 25.61.30.03H
D: 1.31
M: 04
B: 04
Windows Mobile 6 (CE 5.2.1622 (build 18128.0.4.4))
Bought Unlocked.
any idea ??
extUSB damaged? if so what about Bluetooth?
A new ROM could fix something? What about Radio version?
thanks a lot!
Try with a new radio, the 1.58.21.23S works fine..
carlosmozas said:
Try with a new radio, the 1.58.21.23S works fine..
Click to expand...
Click to collapse
thanks Carlos, but how can I flash radio with a non working USB? (not even in bootloader mode)
could it be done directly from microSD card? I've read you can do this for flashing ROM...
Well, after trying several times/ways, I wasn't able to upgrade anything (SPL, Radio, ROM) from microSD.
But my phone WORKS!!!!
I opened it, and checked for a bad contact on extUSB port.
After inspecting with a lens, I noticed cracks on extusb contacts to the board.
I tried to repair them with a soldering iron, a thin tip, and lots of pacience.
After that, I tried the phone on a pc, and miracle! it was detected, ActiveSync connected, and most important, battery was really charging!!!!
So if you have the same extUSB problem, and out of warranty, check those contacts, otherwise tech service will ask you to replace de mainboard!
I bought a HTC Touch Dual (Niki100-20keys) on internet. My home, notebook, office PCs don't recognize it.
This is the original sw configuration:
bootloader: SPL-1.16.000 (CPLD-4)
ROM: 1.31.831.11 (date:11/01/07)
RADIO: 1.58.16.27
OS: windows mobile 6 professional
THE BATTERY RECHARGES WHEN CONNECTED VIA USB.
After searching this forum and talking via PM with some moderators, I flashed WWE official ROM, trying to solve the USB issue. I used the SD-way and it worked fine. Now I have:
bootloader: SPL-1.22.000 (CPLD-4)
ROM: 2.16.831.3 (date:28/11/08)
RADIO: 1.65.29.22
OS: windows mobile 6.1 professional
But the ActiveSync don't work and the SD flashing don't work anymore.
THE BATTERY STILL RECHARGES WHEN CONNECTED VIA USB.
I tried every procedure described in this forum (searched for 3 weeks and tested), but I can't see the phone from PC (also MTTY doesn't recognize it on any COM/Usb port).
It seem to be a Hardware Issue (also according to HTC On-line Technical Service).
Anyone can help me? Is there a test I can do to verify if really USB data transfer channel is broken?? Shoul I try to change USB miniport on the board??
Thanks in Advance