Hi everyone
I'm new to this message board and need some help I hope some one can help. Ok here goes I have today tried flashinng the ROM on the SPV M1000 which is the same phone as an XDAII just orange branded.. when I went to teh orange site and downloaded the rom update v3.66.1.230 and followed the instructions and got the following error message ERROR 120 : COUNTRY ID ERROR 0-0-4-4-4 and the phone / Pda is constantly stuck on and on the screen of the phone it reads Serial on the top of the screen and v1.06 at the bottom.
can anyone please tell me how to fix this problem. I'm not very technically minded when it comes to these things so instructions in laymans terms would be greatly appreciated.
Thanks to every one in advance.
[email protected]
m1000
the unit is stuck in what is known as bootloader mode.
Did download the rom that matches your contry of origin, ie uk for uk phones.
I flash these units all the time at work and dont have a problem.
You can sometimes get the phone out of bootloader by re-running the upgrade. Try downloading it again and running it.
Related
Hi all,
I am puzzled ! I can not upgrade my XDA II anymore.
It was first a 1.66 FRA/Orange XDA II.
I succeed in upgrading it to 1.72WWE.
When using HimaGetDevice, I get PH10/CDL/WWE.
I would like to get back to the french version of 1.72,
but no way : country code error.
I patch the file to CDL/WWE : no way.
Orange/FRA ? Same.
Orange WWE has no more success, nor CDL/FRA.
Seems I am stuck in 1.72WWE...
Does somebody ever meet this strange behaviour ?
blg
try to delete all id-entries in the three update files by using er2003edit and re-start updating. that should help.
regards
peter
I 've just tried this few minutes ago : it doesn't work.
blg
No idea, everyone ?
Since my last post, I have tried many other things,
but still Country Id error.
I have tried without PH10 stuff, and the error
changed in Model Id error.
So I put back PH10.
I have tried the following settings : PH10/Imate/WWE
and Coutry Id Error again. With O-O-O-O-O flags.
Someone knows the meaning of the flags ? Seems
the second one is the model (when no model in
ROM, then PH appears in second place).
blg
Dear friends
I was tring to upgrade my iMate Pocket PC also know as Himalaya with windows2003 SE , while upgrading I faced problems, the upgarde failed and now I am just getting no display and OS too. The only message displayed is
Serial
v1.03
nothing is working please help
bye with regrads,
your unit is still okay; even better that the usb version is showing on the screen. it's simply stuck on bootloader mode. what kind of problems did you encounter resulting in the failed upgrade?
one suggestion i can give before you downgrade is to try and proceed with the upgrade to se. put your unit back on the cradle but don't expect activesync to "recognize" the device. just put it back on the cradle and rerun the upgrade to se.
same thing happened when i upgraded but to wm2005. the screen showed error and the only thing on the screen was the usb version. i simply cradled back the unit and ran the upgrade. worked.
cheers
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
oh, it appears that you have the "wrong country" id issue. i'm not entirely sure as to how to avoid this but i believe it has something to do with the correct rom version (guys, correct me if i'm wrong). where did you get the rom you used for upgrading to se? downgrading might be the only trick if there is no rom for saudi-based users...but if any chaps presently living there and were successful in upgrading their units perhaps you could share the rom version/s you used?
cheers
yasirirfan said:
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
Click to expand...
Click to collapse
To overcome the Country ID Error, first you need to install this tool...
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.zip
Open the ROM file you want to upgrade, then change the appropriate 'Operator ID' code, after this click 'Save ROM image'.
Upgrade ur device. You will no longer face the error message.
Hey guys.
Yes, I'm new here, but not new to phones or computers by any means - trust me.
In any case, what happened was I downloaded the XDA Live version of Windows Mobile 6 for my Hermes (originally Rogers branded) and installed it.
Then, I discovered the actual forum here, and saw Schaps' version of WM6 pro and I want that badly. Regardless of which version I'm trying to upgrade to, I get the same issue.
Here it is:
When I connect the phone normally with ActiveSync and try to upgrade to Schaps' ROM (or Dutty's, or the official one, or the T-Mobile one, or the Qtek one, anything), I get a 260 error saying that my USB cable isn't properly connected. Now I've seen and tried the fixes for that error with no luck. The other error I occasionally get is one saying that my device code isn't correct or something or other. And another one is that my image file is corrupt and that I should check my update utility.
What do I do?
ANY HELP would be greatly appreciated!
Thanks in advance!
P.S. My bootloader version is 1.11 (I think) as per the following screen during bootloader:
HERM200
IPL-1.01
(The following part is in yellow below the above part)
HERM200
IPL-1.11
I had the same problem.
I then upgraded the boot loader with hard-SPL:
http://forum.xda-developers.com/showthread.php?t=296722
Now it's working fine and I can load any ROM.
Cheers
Pat
I successfully upgraded to SPL-1.10, with the same result (no change).
I'm really unsure of what's going on with this...but I really need to upgrade to Schaps' TouchFLO ROM - and should be able to easily...
When you upgrade the rom, chose hard-spl (safe).
Good luck
Patric
hi
I've a SPV C100 bought from orange france
I tryed to upgrade by another rom
when upgrading begin it's stoped at 13%
and restart i got a splash screen (start up orange logo)
I tryed most of rom but upgrading stops at 4% or i got invalid vendor ID
now i can't use my phone if someone can help me
Did my phone die?
I need orange rom fr original or another solution
I'm waiting for your answers
please help me!!!!
IMEI:359534005798165
S / N:SZ645F804879 A
P / N:99HCD060-00
HTC Innovation
Hello,
You should read before trying to flash your device. There is sticky post in the forum who contains a lot of important informations about Hard SPL.
About the original orange Rom i don't know where to find it.
fla242
after a lot of search, finally I got here and read this post...
I encountered the same problem, and I think my phone is 80% dead!
My phone was unlocked, but carelessly, I didn't complete the hard-SPL flash procedure and flash a new ROM directly, so it is dead...
I downloaded an original Orange ROM, but process stopped @4%, and returned "INVALID VENDER ID". Is there anyway that I can flash a new ROM?
Now my phone can enter the rainbow screen only, and it reads:
ONBL 1.08.0000
SPL 1.08.0000
Any experts here can offer a solution? Can I flash rom via SD card, and how? Really really appreciate your help.
SPV C100 was reborned!
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
how
how o make htc gold card for spv c100
l have not find any thing
imyels said:
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
Click to expand...
Click to collapse
The HTC GoldCard is a great way of rescuring a WM smart phone or ppc,it not only works on c100,but also other HTC mobile sevices
please tell me is there any way torecover spv c100
Here you can find a few Oxygen ROMs
Hi,
I have MDA Vario II, aka Herm300, aka Tytn ... My problem is that I've got "No GSM". So I got in forum and checked how to try to Fix it threads... So I tried by putting "Hard-SPL" and also I've tried to Upgrade "Radio", but every time when I start upgrade I recieve "Error 262" at 0%, I changed several Radio's but I had always same result. Also I've tried to downgrade to Official Rom of WM5 and it stops at 13% witn "Error 262" . So my Question is:
Is it possible that I have hardware problem not radio problem .
ATM it works fine with Schap's ROM as PDA and "No Gsm" Again ...
On Bootloader I got:
IPL-1.01
SPL-1.40.Olipro
If there is another solution that may help I'm open for advice.
classic brick...
wich one is the 262 error. (why to put the error number? write the entirely error!)
Dunno if it is brick, because I cant update with most of the roms and also I get error with every radio I try to update with ... I've tried with more than 10 radio's from the archive ...
P.S. I think it is Hardware problem + I got brick and because of the hardware problem i cant reinstal rom+radio or rom to repair brick problem ...
So wich one is the error??????
error 206 207 200768 i dont know...i have this issues too and the cprog.exe seems to be incompatible ... my cable hasnt a good contact to the usb plus the rom i had i didnt downgrade to wmoriginal in a few times...
-Mobile MDA Vario II - help my screen is four colours
Hi I have the same phone a T-Mobile MDA Vario II i ran unlock program HTC_Hermes_SIM_CID_Unlock_v3a - i must have run it wrong or something cause my phone has colours on the screen red green blue white with the ipl 1.01and spl 1.40 - it used to ipl 1.4 (ithink) and spl 2.14(i think) before i tried to run the hct_herm.....v3a.
Is my phone trashed or what can i do . when i plug in the usb cable the message at bottom goes from serial to usb but thats it - the active sysnc does not see the phone. help help help any advice welcome ( short of buy a new phone) this is my new phone i only got it a day ago.
tks