Hey Guys,
I'm running WM5, 1.50g for more than a week now.
Its simply wonderful.
there are some compatibiltiy issues witih the S/Ws now; but that'll be there. we were able to use this OS before the release thats the big thing.
I'm looking for two piece of info here.
1> Wireless USB modem is not working - does anyone have any idea? inputs on this? (i didnt try to mix this topic with non-woking buttons; hope thats okay and we can close the topic as soon as its resolved)
2> I'm on 1.50g now and able to use large amount of storage mem. I was running 1.60a earlier and cud not use large mem (just about 14M for storage) where I had to store all my email data and the loaded S/Ws. due to the space crunch; I had to come back to 1.50g.
As the 1.60a is faster (i heard so - cud not test and fall back to 1.50g imm.) and i'd like to go for that. Does anyone has got any idea how to make use of the 120MB memory in 1.60a to be used for my email storage and to be able to load S/Ws and data on it?
Thanks in advace.
Wireless USB modem on WM5
hey guys,
just reviewing whether anyone has contributed!
I saw another thread "Warning WM5 1.60a and Extended _rom" and I think, I can get around a way on how to make use of that 120mb program memory in 1.60a and i'll definitely going to try that once I hv the steps with me.
as regards the Wireless USB Modem; I think i'm the only person who's facing this issue or may be fewer ppl. if anyone's using I-mate PPC phone with WM5 with working application (wireless USB modem) please share ur configuration with me.
thanks.
Updating the topic to expand the audiance and expacting at least one response
:lol:
I am also having a problem with the USB Modem... It says "com open error (8)"
hello Duan,
have u found any resolution yet?
Nope... And after searching around the net I still have had no success.
Hey Guys,
I'm switching back to the WM2K3 SE now. I think its high time; we do not have any idea about the USB modem functionalities that's most important while we use the device as a modem while away from home or office.
I was okay with Camera, Record and all other facilities not available. I'm not in for all those flashy features but I have to have my Voice and Data connectivity inplace thats more than important for me anytime.
So, Guys; please please let me know once we have a solution for the Wireless USB / BT modem.
Thanks.
Wireless Modem on WM5
Went back to the 1.60b now coz i thought I have now got the BT adapter / dongle.
However, I'm not able to use the BT wireless modem with the adapter itself.
as I said.. as soon as i start the wireless modem application the signal indicator doesnt show the cross mark on it and continue show the signal strength. otherwise I think my lappy is able to detect the phone and everything works fine except the modem application.
I downgraded to a couple of versions of SE now (I have now forgotten how many times I flashed my device - guys let me know if its harmful to flash the device multiple times - now a days its about almost everyday I flash my device, thanks to my exch servr that hold my data). I tried 2.20SE I also tried the latest one thats been converted to english by Buzz and tried to start the BT modem application - no luck - same symptoms.
and again I flashed my device with 1.60b (along with the DCR ). However, the BT modem or USB modem issue is not resolved.
I'd really appreciate if someone can help me with the Modem application PLEAZEEE - PLEAZEE.
THANKS A LOT IN ADVANCE --
Yeah forgot to tell ya - I'm using iMate Pocket PC Phone Edition.
Guys, please try this configuration on WM5 as bluetooth modem, remove any connection on 'My Isp', start wireless modem application & dial...
FYI, I use 1.06b rom & billionton usb dongle. Btw I can't determine which modem type it use (cell line / gprs / etc.).
COM OPEN ERROR!! WM5
Has anyone solved the COM OPEN ERROR on the WM5 phone devices.. Desperately trying to setup the so called USB wireless modem for my laptop...
Its driving me crazy!!
Any help gratefully received!
Re: COM OPEN ERROR!! WM5
timroutledge said:
Has anyone solved the COM OPEN ERROR on the WM5 phone devices.. Desperately trying to setup the so called USB wireless modem for my laptop...
Its driving me crazy!!
Any help gratefully received!
Click to expand...
Click to collapse
while i have not gotten the wireless modem to work, i have successfully started and seen the connection icon turn yellow. having written that, i started getting the "com open error" after adding com ports under bluetooth set-up. deleting those ports under bluetooth eliminated the error for usb in wireless modem application.
separately, in order to see the modem in my phone & modem control panel, i had to press start in wireless modem prior to tethering the device to my thinkpad.
btw, i am running wm5 on a ppc6700 (cdma/ev-do version of the htc apache, i believe.)
kp
Related
After creating and installing a new ROM based on ENG-4-00-05 using the kitchen at www.yorch.net (did this a couple of months ago), I have been unable to get either of my GPS receiver software packages (CoPilot & Pharos) to attach to the comm port. I have no problems with ActiveSync 3.7.1 which uses the same comm port. BTW, this is a Siemens SX56 running on the US AT&T network.
Both software packages seem to think that the port is unavailable, but it is NOT clear if they think the port is missing or in use by another program.
When I first discovered this problem, I did build several different ROMs just as a sanity check, but they all seem to have the same issue. Is there a problem with 4-00-05 base code? Other than this problem, I have NO problems with the new ROM code and really enjoy the new features of WM2003.
Any help will be appreciated
David
be sure that beams is not checked under settings/connections/beams, also the foling keyboard driver if present will grab the com1 port also, you need to disable it, it will re-enable after reset so will need to be done after each reset.
usb driver.zip for wi modem
Installation of HTC USB modem driver into Windows XP
I am sorry to bother here, unfortunatelly, I have a problem. I can not install the USB driver into Windows XP on my PC. If I open an inf file, no modems are listed. I have Win XP home CZ (Czech). What could be a problem? Bad driver? Is there another driver? Thank you very much for your answer.
Novka
unfortunately
these are for an XDA II ... so we are still at the
"How can we use XDA I as a wireless modem on WM2003 (except the DE version) ?" stage.
Anyone has options or solutions. I hate to carry another GPRS phone along the XDA just to connect my laptop.
xda-modem
you can look at : http://www.myxda.com/downloads/swupgrade/setup modem_win2k.pdf
Re: xda-modem
donnyriyadi said:
you can look at : http://www.myxda.com/downloads/swupgrade/setup modem_win2k.pdf
Click to expand...
Click to collapse
This is a great howto document but my understanding is (and I have checked on my PPC) their is no wmodem.exe software.
The problem is as follows.
The entire wmodem is using rilgsm (and the radio software part) in order to work.
So from this poin it is impossible to make it happen.
What I suggested, but since my PPC programming skills are low, is to find a program that simulates a proxy on our XDA. Meaning that the XDA is used as a gateway from the computer.
The proper definition is, i think, "reverse passthrough".
The starting point can be the Remote Control software that display the XDA image on PC ...
Anyone has seen such app ... or has it in development ?
Decebal
wireless modem
i had a standard german rom as i bought my xda, and there was also no wireless modem app.
but if you install another rom, like the wm2003 one, or the special rom from xda-developers, the wireless modem app is already installed.
my problem is, when i connect my modem after a while(about 15-20 minutes) or if i open more than one webpages at the same time, the modem doesn't work anymore, and i have to reset my xda. I have tried with another handphone(nokia 6800) and it worked properly. Does anyone knoe why this happened ?
The starting point can be the Remote Control software that display the XDA image on PC ...
Anyone has seen such app ... or has it in development ?
Click to expand...
Click to collapse
there is one from microsoft. its called remote display control. but it only work with activesync, and if the activesync connected to xda, the internet connection from the xda won't be used, instead the xda will try to connect via your pc.
Small point... if you look at benmuliono's post it was for XDA2 not XDA1...
HTC USB modem driver
Good day,
about my post, there is a misunderstanding. There is no problem with XDA I or XDA II and wireless modem application (for the present). There is a problem with a driver usbmdm.inf and its installation into the Win XP CZ, because the USBMDM.INF file is not recognized as the driver by my Win XP CZ (HTC USB modem does not appear in installation window).
Thus, if the wireless modem application is running on the XDA, the info "new hardware is detected ..." appears. Then, I want install the modem into the system, but I am not succefull.
I try to make connection with XDA II of my friend, although I am an owner of XDA I (which is shown in left side). That is probably the source of the misunderstanding.
I am looking for somebody who has similar problem or has a working driver for my system and would be so kind to send it to me ([email protected]).
Thank in advance for your help,
Novka1234
xda as modem for laptop
After 3 months and 463 hairs later, I have finally figured a work-around for turning our xda (1)'s into a USB modem for internet access via GPRS. I will have it available for download on my website for only $20.00 beginning 7/20/04. it will be available through PAYPAL only. (I know this is worth a lot more than twenty dollars, but I wanted everyone who wants it to be ablle to afford it.)
how
how can you demonstrate this first.
this is interesting ... but a.f.a.i.k. it is not possible.
are we talking about any WM2003 ROM and only with the wmodem software ?
F.A.I.K.
it will be available for any english wm 2003 rom , (propriatary) software pkg,
I understand the skeptisism, but will not be releasing a demo or trial version. this has always been possible as I understand it, it has just been squashed by the manufacturers and software giant. just a couple more days and everyone will be happy.
DMW
good
this will be indeed great. i'm close to buy an expensive pcmcia GSM card for my laptop but this will be a great alternative.
can you tell me this:
* the pc will use all ports for connexions (not limited lika a proxy) ?
* will the receive function be disabled or when a call comes it just suspend data and allow call ?
* do we need to install software on xda and pc too ?
* are there any inconveniences from your point of view ?
* can you at least post some screenshots or anything "tangible"
* what transfer rate have you achieved ?
Thanks for your ideea and making it practical.
?
i guess that no news is bad news.
so be it!
XDAII i modem failure
hello frns, i am getting a strange error since 2 days it says"error:692,
hardware failure of the connecting modem"
i am using my XDAIIi PPC to access net on my PC. i have installed the HTC
USB modem for the device.
when i run the query it works fine and give erything in success but when i
try to dial it gives me the above error. i was able to connect it before
but now it is not working.
i am having airtel postpaid connection in M.P.
also before i used to get the connection light up in the wireless modem
dialog on my PPC but even that is not there now. please help me with that.
wht should i do to get the net running up again. i there any other drivers
which i should use or what??
usbmodem for xdaIIi
Thank you, got the USBMDM from here. the files above is still working. AFtet install it the setup is done till finish. No problem, it works on my ppc. Now I don't to worry getting into the net via my xdaIIi.
Wow, this is really great. I'm using the MDA Vario to connect to the internet.
Works great!!!
possible fix for "Error 692"
@puneet_84:
I too followed the installation instructions exactly, but had Error 692. After extensive web-searching, found the solution. Hope it works for you - it did for me. (But no guarantee!)
http://www.ppcsg.com/index.php?showtopic=78789
On trial and errors testing out various config changes I found that the key cause of my XP popping out the Error 692 is when I disabled Modem Compression at any end whether one and not the other or both (meaning the setting at modem properties in the Control Panel and the modem properties in the Dialup networking sections).
The fact is Modem Compression must be enabled on the Control Panel modem properties for the HTC USB modem and the modem properties in the corresponding dialup networking configuration.
Click to expand...
Click to collapse
Hello:
Is it possible to upgrade the ROM without a serial connection? Maybe useing an SD card or other such method??
The connector on the bottom is damaged and will only charge, but not connect, I use BT for all other connectivity, but if I can change the ROM I might be able to get the unit fixed for free (long story)
icarusbop said:
Hello:
Is it possible to upgrade the ROM without a serial connection? Maybe useing an SD card or other such method??
The connector on the bottom is damaged and will only charge, but not connect, I use BT for all other connectivity, but if I can change the ROM I might be able to get the unit fixed for free (long story)
Click to expand...
Click to collapse
u can use SDimage....
here is link to WM5 SDimage...
http://buzzdev.net/index.php?option=com_remository&Itemid=68&func=select&id=9 :wink:
Thanks for the info - I'll investigate it , but I must ask : what is bad about useing windows and firefox???
his signature is just able to display to each user who see it
what their system is
as to show that even on the internet nobody can be 100% anonymous
so i dont think you should see it as his openion of anything since
him as a user dont see what you see unless of cause he have the same setup as you
ok Doke.
This kitchen is based on sprint 3.35 release
NOTE:This is an os rom. radio 3.35 and olipro 2.40 unlocker required.
Features:
* Only 57 mb, includes all tools and everything.
* Very easy to cook. just run buildflash.bat and follow instructions.
* Clean
oem folder has been cleaned, windows live and some other stuff is removed from sys, Every program has its own folder. if you want it to be cleaner just delete related folders from sys folder.
* Adjusted security policies
* based on original sprint release. It is not a remixed version. Almost everthing extracted from original sprint rom, including xip, sys, oem drivers etc.
* Fixed PIE, not freezing anymore.
I have spent lots of time on it and have adjusted lots of stuff that i cant remember.
I have learnt most of stuff from xda-developers.com, ppcgeeks.com, howardforums.com , no2chem and dcd and they are source of some of the packages i have included. So thank you all.
It would not be possible without the wonderfull kitchen tools either.
So please thank them also if you like this kitchen.
Instructions: Just run buildflash.bat and follow instructions.
http://www.megaupload.com/?d=JMST2UF9
March 30 UPDate:
http://rapidshare.com/files/103708242/a1kitchen.zip.html
Disabled extended rom , added some more oem's such as telus mobile email, metrix, x button etc, fixed sprint epst
A1jatt, looking forward to trying this out. Thanks again for the work.
GPS Working?
Also have you noted any issues with the alarms with this Kitchen/Rom.
Also stock dialer OEM'ed??
Sopranokam said:
A1jatt, looking forward to trying this out. Thanks again for the work.
GPS Working?
Also have you noted any issues with the alarms with this Kitchen/Rom.
Also stock dialer OEM'ed??
Click to expand...
Click to collapse
Link is working now.
Yes gps is working, tested with tomtom, windows live and google maps.
No no problems with DST, alarms etc.
Yes stock dialer is OEM'ed.
Link not working?
The file you are trying to access is temporarily unavailable.
etexter said:
The file you are trying to access is temporarily unavailable.
Click to expand...
Click to collapse
Ignore. I got it from megaupload finally.
Thanks for the perfect kitchen...
No bugs, fast, easy to customize and no attempt to install bleeding edge updates!!! This is exactly what I was looking for.
Thanks again!!!
my experience.
Great rom - easy to use, and fast. Although it didn't like being compiled under parallels on Mac OS X, I had no issues with the build file under a windows laptop.
My only problem that i have found (kind of major) is that I can not connect to the internet via #777 on Telus. I have the "Ev" on my title bar, and the internet briefly connects, but quickly drops the connection saying unknown problem. I have no idea why this is happening, but would love a solution
Otherwise google maps, works fine w/ wifi, and I was unable to get tomtom to find the map (no maps found) so have no clue there.
Thanks for the rom, and if anyone has advice on how to resolve my two issues that would be great Keep up the great work.My ex
artiss said:
Great rom - easy to use, and fast. Although it didn't like being compiled under parallels on Mac OS X, I had no issues with the build file under a windows laptop.
My only problem that i have found (kind of major) is that I can not connect to the internet via #777 on Telus. I have the "Ev" on my title bar, and the internet briefly connects, but quickly drops the connection saying unknown problem. I have no idea why this is happening, but would love a solution
Otherwise google maps, works fine w/ wifi, and I was unable to get tomtom to find the map (no maps found) so have no clue there.
Thanks for the rom, and if anyone has advice on how to resolve my two issues that would be great Keep up the great work.My ex
Click to expand...
Click to collapse
That is weird. You might want to try without any add-ons and reprogram your phone via *22803 using option 1 and then option 2 to update prl.
I have flashed 5-6 phones ... have not had single problem in last three weeks.
No body else has complained at ppc or xda yet. Since not even one other person is having same issue, I am guessing it’s not a bug; it’s just your settings.
If you can help me with duplicating the problem on my phone, i probably can fix it.
Tomtom issue is not rom related. Tomtom maps should be stored in folder in the root directory of sd card.
Sure what info would you like to know? I performed the following:
- Installed the Olipro 2.40 unlocker
- Flashed with Sprint Rom 3.35 latest
- Used the buildflash.bat on a windows box to create my install
- Installed the created rom
- Performed a *22803 with option 1 & 2
- Checked with Telus that I do infact have a data plan
- When I connect to the internet either through Opera or IE I get this message "Cannot connect for an unkown reason blah blah please check settings"
Now I have tried with a username & password (esn dec) with no luck. Now with my ignorance I have misplaced the data I wrote down on MSID, NAI, DUN, etc numbers so I have no way of verifiying that data. Now when I installed the sprint rom it started the install its extra stuff after an accidental power cycle - did that fubar stuff? Should I of relocked my phone, reinstall telus, then re-unlock and perform the above steps?
So with tomtom the maps are in the root of the SD? In a dir? Do I have to edit the currentmap.dat file?
Thanks for the quick reply and help - what other info do you want
from here
http://rapidshare.com/files/103173398/Erase_Extended_Rom.zip.html
flash the attached rom ( it includes flashing utility) . it will erase sprint stuff you have in extended rom.. that should fix data problem
tomtom maps should be \\storage_card\usa and canada maps
no need to edit any files
Did that, and re-entered the data for my #777 connection (username and password). Unfortunately I still have no internet. Will keep plugging away. Thanks
However TomTom is working now with maps
artiss said:
Did that, and re-entered the data for my #777 connection (username and password). Unfortunately I still have no internet. Will keep plugging away. Thanks
However TomTom is working now with maps
Click to expand...
Click to collapse
i have followed the steps you lave listed, still i am unable to duplicate the problem.
may be flash telus oem, get data working and then copy every single epst setting before you reflash.
inorder to flash telus oem you will need relocker from ppc site.
EDIT: seems like internet problems are related to sprint customization..
http://forum.xda-developers.com/showthread.php?t=380820
Cant get to epst on sprint either
have you tried ##778<send> and ##778#
? you can also go to windows folder and run epst.exe
a1jatt said:
have you tried ##778<send> and ##778#
? you can also go to windows folder and run epst.exe
Click to expand...
Click to collapse
It dont work either way...codes or windows folder!
How to reinstall
On the Kitchen we have a folder named OEM with some program on it
how is possible to reinstall that progral like "HTC_CommManager_Titan"
Thank You
Alain
NotLutzik said:
It dont work either way...codes or windows folder!
Click to expand...
Click to collapse
here is the fix.
http://rapidshare.com/files/103708242/a1kitchen.zip.html
I upgraded to Spiaatie WM6.5 v3 - I get this message when I turn on my hx2750 - 'Unrecognized Card'
In the HP Wi-Fi Manager the link status says - 'Driver Not Loaded'
and in the version tab all three fields in the wireless LAN Information say
'Driver Not Loaded'
I have tried reinstalling v2 which worked before - Same problem and not all aspects of v3 removed such as the start up screen.
I have installed a wm6.1 version and this still did not solve the problem.
I have also tried going back to wm2003 from the HP site and again still missing drivers.
NONE of these options have worked.
I have searched all sorts of forums and even though others have had this problem NO solution has been posted.
Is this a hardware, Software or Registry problem?
If will test any options provided as I would really like to get it working again.
Any solution found will be posted in detail.
Many thanks in advance.
It would appear that if you went back to WM5 and even WM2003 and it still does not work then it's possible its a hardware issue. You may be out of luck with software fixing it. I'm running it with no problem and have not heard of anyone else having these issues. Especially with every version of software.
Thanks for getting back to me. I guess I will try taking it apart and seeing if any wires have come loose.
I anyone has any suggestions as to what to look for that would be good.
or if anyone has any other ideas as to how I might fix this please let me know.
I might go in Ebay and see if I can get a cheep Compact flash wireless card but would prefer not to as I use that to store data and music on while I use the SD card for Programs and TomTom data
Thanks
Update
OK took my Ipaq apart and got it back together without killing it
No luck though still no wireless.
Widened my search and found a russian site that detailed a simular problem and provided an update fix. My problem was that I could not get registered on their site.
Can someone help me and get the file 'up0015.cab' in this link
http://4pda.ru/forum/index.php?showtopic=57381&st=1220&p=1440781&#entry1440781
I can't understand why I could not login but this is supposed to solve my problem if you believe google translation
Thanks in advance.
osmanager said:
OK took my Ipaq apart and got it back together without killing it
No luck though still no wireless.
Widened my search and found a russian site that detailed a simular problem and provided an update fix. My problem was that I could not get registered on their site.
Can someone help me and get the file 'up0015.cab' in this link
http://4pda.ru/forum/index.php?showtopic=57381&st=1220&p=1440781&#entry1440781
I can't understand why I could not login but this is supposed to solve my problem if you believe google translation
Thanks in advance.
Click to expand...
Click to collapse
Is there anyone who speaks russian who can help me?
File up0015.cab
Here is the file you are looking for.
I have seen the same problem with the "driver not loaded" message on my
HX2790. Solved the problem by doing a hard reset if I remember correctly.
Since I haven't used this file myself I must stress that using it is at your own risk.
The file was made by the great cook Yurrix and can also be found on his website. That is where I got it from.
Website is: http://all2me.blogspot.com/2008/02/15.html
Hope this helps.
Greetz Rowley.
Update
Hi
Many thanks for the file.
However unfortunatly it did not work.
In my settings screens it updated my Network Adapter list to include a SAMSUNG WLAN CF CARD (SWL-23x0)
Did a Hard reset after - Calendar + Message + Power and reset - to get to Formating PS screen.
Now Network Adapter list says HP iPAQ Wi-Fi Adapter
However the HP Wi-Fi Manager says
Status - Link Status - Driver Not Loaded
Version - Wireless LAN Infromation - Driver Version: Driver Not Loaded
F/W Version : Driver Not Loaded
MAC Address : Driver not Loaded.
I then ran the inbuilt self test. This seems to give a false result if I test only the Wi-Fi it hangs but if I test it with other items it says it passes. But i don't believe it.
I now think my card is dead as someone told me earlier.
But I had to try.
Thanks to all who helped.
Here is the 0016wifi cab made by Yurrix.
same problem
Same problem as above, but I tried switching wireless cards with another hx2795 (one that won't charge the battery) and found they both work (just not connecting through the software or possible hardware path). I applied both the xxx15 fix and the xxx16wifi fix and neither one works.
if I can't find the answer, I will just have to use one as a battery charger and the other as my pda. . .
if anyone knows of a fix, please let me know.
thanks