Related
:evil:
Hi guys,
I need some serious help here. Today I tried to upgrade my MDA II with the latest 1.60 ROM. Somehow during the upgrade something went wrong and my computer frooze and needed a reset. This was in the beginning 10 minutes of the ROM upgrade and my the screen of my PPC went off. After the reboot of my workstation I could not get my MDA II to connect to my workstation. The MDA is completely useless now. The only thing I have on the screen is:
Serial (or USB) on top of the screen (with no backlight) and at the bottem of the screen Version 1.01.
I can't soft reset of hard reset. I took the battery out and waited for almost 30 minutes but I still can't turn the thing on nor can I soft or hard reset. I can't thing of anything else that I can do and I just sold my Loox yesterday so now I'm lost!
Anybody with a good suggestion??
Please help.
Regards,
Wouter
The Netherlands
I think it's a way to use a SD-card with a Rom on it.
Looks like Your bootloader is still working and can reflash a rom to Your device.
Now You have to find somone with an 64MB SD-card to put a rom on it and reflash Your device.
With best regards
Jens
Hi Jens,
I think my bootloader is not working anymore. I tried to do a hard reset a dozen times but the bootloader menu doesn't come up. But thanks for suggesting though.
Wouter
Hi wouterk,
I don't know if this would be of any help, but you've got nothing to lose now.
I've got a similar error that the RUU program asked me to remove my XDA II from the cradle and right after that, the XDA II screen freeze at "Seria 1.01", same as yours.
So I put my XDA II back to the cradle and from my PC, I clicked Control Panel > System > Device Manager > and here my XDA II was recognized as an unknown device, so I updated the MS USB Sync driver.
After the driver update, I rerun the RUU and the ROM upgrade went fine. Now I have my XDA II back alive and kickin' with the new MDA ROM. At least this works for mine and hope it would also work for yours as well.
HTH.
Hi Joparp,
Of course I gave your suggestion a try. But too bad it didn't work for me like that :? . I remebered that when my workstation crashed, after the reboot it found a new USB device (my cradle?) but I couldn't get your sollution to work for me. But I still have hopes. Tomorrow evening I'll meet a guy who can fix my problem (keep my fingers crossed....). So I feel reasonable relaxed now.
It is nice to see that so many people responded to my problem. I posted my problem on three different sites and many people responded. That was a nice feeling! I keep this thread posted about the result of tomorrow.
B.t.w did you install the 1.60 ROM eventually?
Wouter
Hello wouterk
well, i'm sorry about this and i guess the safest way to do ROM update thru SD Card.
i do agree with jenson suggestion and i can't see any other way to resolve this problem which i hope will work here are the steps as follows :-
ask any one who has MDA II device, 64MB SD Card and SD Card reader to backup his/her ROM and Post it for you somewhere where you can download it and write it to SD Card.
ofcourse he/she if using Windows will need serial cable and hyper terminal software which normally can be fount under start/programs/Accessories/Communication otherwise download from http://www.hilgraeve.com/htpe/index.html
get the device into Bootloader Mode ( power button+any direction+reset )
Connected via Serial cable and use these setting 115200 baud, 8n1, direct to com1 port or maybe com2 it depends on which port they use
type d2s command to backup ROM to SD Card which i recommend 64MB SD card formatted and when done you will see something look like this
D:Waiting for card insert.........
SDetected one card
SD:ready for transfer OK
Total card size=3D40000ze=0
SDCARDD2S+,cStoragePlatformType=FF
********************************************************************************
***********************************************
Store image to SD/MMC card successful.
SER>
then reset the device and get SD card reader and insert this card into the reader and use ntrw image reading and writing tool
if you don't have it you can download it from here http://www.tamiminet.com/othman/ntrw.exe
from the command line run ntrw read MDAII.nb1 E:
This assumes your SD card reader has drive letter E:
now you will have new file which is MDAII.nb1 it's about the size of the SD card zip it and post it somewhere so he/she can Download it and unzip it then write it back to SD Card using this command b]ntrw write MDAII.nb1 E:[/b]
again this assumes your SD card reader has drive letter E:
when done go into bootloader mode ( power button+reset ) with SD card inserted, hit camera button and flash your device with rom which is on SD Card
if you don't have serial cable you still can do it using Linux with cardle and thanks for bio and few other cool guys who mentioned this hints on other thread
put your device in bootloader mode
connect via cradle
use any terminal (minicom) to connect to the used port (/dev/ttyUSB0)
- you should see something like 'USB>' or 'SER>'
put an SD Card into device
type d2s on command prompt
wait untill you see Store image to SD/MMC card successful
i don't think this will include the Applications on the Extended ROM but no problem this can be done later.
i hope this could help to get back you device to life.
best regards and good luck.
Othman
Riyadh, Saudi Arabia
It is working again!
:lol:
Hi guys,
Thanks to Akira my MDA II is working again. Everything is working again exept for the bluetooth communication with my Emtac bluetooth GPS. That problem still remains in my case. I even did another hard reset but still the same problem. I then put the Towa fix again on it and now I can use my GPS again.
So thank you all guys!
Wouter
Hey Guys,
I'm running WM5, 1.50g for more than a week now.
Its simply wonderful.
there are some compatibiltiy issues witih the S/Ws now; but that'll be there. we were able to use this OS before the release thats the big thing.
I'm looking for two piece of info here.
1> Wireless USB modem is not working - does anyone have any idea? inputs on this? (i didnt try to mix this topic with non-woking buttons; hope thats okay and we can close the topic as soon as its resolved)
2> I'm on 1.50g now and able to use large amount of storage mem. I was running 1.60a earlier and cud not use large mem (just about 14M for storage) where I had to store all my email data and the loaded S/Ws. due to the space crunch; I had to come back to 1.50g.
As the 1.60a is faster (i heard so - cud not test and fall back to 1.50g imm.) and i'd like to go for that. Does anyone has got any idea how to make use of the 120MB memory in 1.60a to be used for my email storage and to be able to load S/Ws and data on it?
Thanks in advace.
Wireless USB modem on WM5
hey guys,
just reviewing whether anyone has contributed!
I saw another thread "Warning WM5 1.60a and Extended _rom" and I think, I can get around a way on how to make use of that 120mb program memory in 1.60a and i'll definitely going to try that once I hv the steps with me.
as regards the Wireless USB Modem; I think i'm the only person who's facing this issue or may be fewer ppl. if anyone's using I-mate PPC phone with WM5 with working application (wireless USB modem) please share ur configuration with me.
thanks.
Updating the topic to expand the audiance and expacting at least one response
:lol:
I am also having a problem with the USB Modem... It says "com open error (8)"
hello Duan,
have u found any resolution yet?
Nope... And after searching around the net I still have had no success.
Hey Guys,
I'm switching back to the WM2K3 SE now. I think its high time; we do not have any idea about the USB modem functionalities that's most important while we use the device as a modem while away from home or office.
I was okay with Camera, Record and all other facilities not available. I'm not in for all those flashy features but I have to have my Voice and Data connectivity inplace thats more than important for me anytime.
So, Guys; please please let me know once we have a solution for the Wireless USB / BT modem.
Thanks.
Wireless Modem on WM5
Went back to the 1.60b now coz i thought I have now got the BT adapter / dongle.
However, I'm not able to use the BT wireless modem with the adapter itself.
as I said.. as soon as i start the wireless modem application the signal indicator doesnt show the cross mark on it and continue show the signal strength. otherwise I think my lappy is able to detect the phone and everything works fine except the modem application.
I downgraded to a couple of versions of SE now (I have now forgotten how many times I flashed my device - guys let me know if its harmful to flash the device multiple times - now a days its about almost everyday I flash my device, thanks to my exch servr that hold my data). I tried 2.20SE I also tried the latest one thats been converted to english by Buzz and tried to start the BT modem application - no luck - same symptoms.
and again I flashed my device with 1.60b (along with the DCR ). However, the BT modem or USB modem issue is not resolved.
I'd really appreciate if someone can help me with the Modem application PLEAZEEE - PLEAZEE.
THANKS A LOT IN ADVANCE --
Yeah forgot to tell ya - I'm using iMate Pocket PC Phone Edition.
Guys, please try this configuration on WM5 as bluetooth modem, remove any connection on 'My Isp', start wireless modem application & dial...
FYI, I use 1.06b rom & billionton usb dongle. Btw I can't determine which modem type it use (cell line / gprs / etc.).
COM OPEN ERROR!! WM5
Has anyone solved the COM OPEN ERROR on the WM5 phone devices.. Desperately trying to setup the so called USB wireless modem for my laptop...
Its driving me crazy!!
Any help gratefully received!
Re: COM OPEN ERROR!! WM5
timroutledge said:
Has anyone solved the COM OPEN ERROR on the WM5 phone devices.. Desperately trying to setup the so called USB wireless modem for my laptop...
Its driving me crazy!!
Any help gratefully received!
Click to expand...
Click to collapse
while i have not gotten the wireless modem to work, i have successfully started and seen the connection icon turn yellow. having written that, i started getting the "com open error" after adding com ports under bluetooth set-up. deleting those ports under bluetooth eliminated the error for usb in wireless modem application.
separately, in order to see the modem in my phone & modem control panel, i had to press start in wireless modem prior to tethering the device to my thinkpad.
btw, i am running wm5 on a ppc6700 (cdma/ev-do version of the htc apache, i believe.)
kp
Hi,
I have an XDA O2 (Wallaby) which I got from a friend of mine who used it without a problem in its life and now I am stuck with a flashing O2 XDA.
Let me try to best describe my problem.
I had copied some of my excel files onto the O2 and then I had a distinct feeling that it had gotten to be much much slower.I am not too sure if this is the cause.
I was not using it as a phone but one day I slipped in my SIM card so as to surf the net and it just would not connect via GPRS and after that it had become very slow hanging every once in a while so I did a soft reset but it still was slow and the GPRS would not connect neither did it detect my phone service provider.I used to surf prevously through GPRS without any problems.
Then I did a hard reset and it just wouldnt work after that it would start with the blue O2 screen and begin to flash on and off with a blank screen with a small keyboard icon in the lower right hand corner presumably the affected excel file....I think my XDA has a virus now please help me out from here.
I tried doing a hard rest and I depressed the reset button on the RHS side that's it(smaller hole bigger one for soft reset) Once I press down with the smaller end of the stylus I press it again then the blue screen with the O2 logo comes to life it stays on for sometime and then a "tink" noise comes and the busy sign comes as if it has just opened an application ..a blue small band on the top most corner and a small keyboard icon on the lower rhs hand of the screen then the screen begins to flash ten seconds apart for quite some time...infact that all it does before shutting down and restarting all over again.
Is there any other way to do a hard reset.What is the right way?? as on one of the forums said that I should depress the power button and the soft reset button at the same time for about 5 sec I tried the hard and something called the WALLABY Bootloader V5.15 came on the screen with the message 'WAIT' after a couple of nail biting seconds I got an error saying GSM ERROR the screen was a clourful white red green and blue strips....what happened??
Then I proceeded to depress the soft reset button it restarted with the usual error of a program being opened and the screen flashing..
Hope to get a reply from this forum.
Take care
Ciao
Al
flashing screen
almaal have you tried flashing with a sd card? the GSM error indicates that the radio unit is corrupt. Have you attempted to upgrade the rom? If u have was it programme A or Programme B? by the sounds of things you have. Does the power light light up? let me know the answers to this and i might be able to help
have you tried flashing with a sd card? the GSM error indicates that the radio unit is corrupt. Have you attempted to upgrade the rom? If u have was it programme A or Programme B? by the sounds of things you have. Does the power light light up? let me know the answers to this and i might be able to help
Hi,
1st off thanks for your reply....
I have downloaded Programme A to upgrade my rom but cant seem to get it loaded onto the SD card. I unzipped osimage.exe and tried to store it from my PC to SD card but cant seem to do it....furthermore I was advised by friends out here not to be a braveheart and venture to kill my XDA but still I'd like to try...you see I'm not to conservant with the software bit and I'm only a end user...
Could you give me a step by step guidance to get the software loaded to the SD card via a card reader and then flashing the rom..
Hope to hear from you....
Alvin
flashing from sd card
Firstly make sure u have winzip winrar or some other compression software on the computer then right click on the programme A exe file and click open with whatever compression program u have i use winrar so i will say open with winrar. You now need to extract all files into a folder.
Once you have done that open up OSimagetool and on source browse for the folder u just extracted the programme A to and look for nk.nbf,you will need to tell it to look for nbf files and not nb1 files , which is the default and select it,it is in the english folder. In the destination u need to select your sd card which should be in a card reader as u cant program it directly to the XDA or via the memory card, once you have done this click copy. when that is finished you need to take the card and place it in the xda and do a cold reset . A screen will appear saying SD Download click the action key on the pad to commence flashing. after a few minutes it will inform you that it has finished. remove the sd card and Cold boot again then once the wallaby has rebooted back to your bootloader screen soft reset it,ignore the gsm error now cross your fingers while you wait to see if it reboots. If it reboots ok set up activesync again and run the radio upgrade. By the Way any info on the sd card should be saved before attempting this as it will be overwritten by the osimage tool. Also only the xda can read the card , the pc will say it needs formatting Good luck
Any Luck
Did you have any luck reflashing with a new rom almaal?
I have followed the procedure. The system rebooted and I got the GSM error which I ignored and continued the process. The system rebooted properly i.e I get to see the start menu and the calendar, but the device does not get detected by activesync. Another thing to note is that the system has become terribly slow. And although the backlight is switched to on it the device keeps on flashing. What do I do now?
almaal said:
I get to see the start menu and the calendar, but the device does not get detected by activesync. Another thing to note is that the system has become terribly slow.
Click to expand...
Click to collapse
That´s quite normal on a device with the gsm error.....
Stefan
wallaby xda flashing
format the sd card then and copy the radio upgrade over to the card. not as an exe file almaal, right click it again then extract files and copy the files over , if u have a cab file including then just use file explorer on the xda to navigate to the storage card and click on it and it will install. If not then click on the rsupgrade.exe. Hope you have more luck with this than i have i had . Good luck
wallaby xda flashing
format the sd card then and copy the radio upgrade over to the card. not as an exe file almaal, right click it again then extract files and copy the files over , if u have a cab file including then just use file explorer on the xda to navigate to the storage card and click on it and it will install. If not then click on the rsupgrade.exe. Hope you have more luck with this than i have i had . Good luck
Not charging I think
Hi I dont know what to make of it but now my wallaby came to life with the rom that I flashed but it seems to have gone crazy. Let me best try and explain.
1) The green charge light does not come on when I put it onto the cradle or plug it directly for a charge.
2) It does not make any sound, no beeps no nothing....but when an mp3 is put on it plays
3)The back light does not come on which is enabled but does not work I have to work with a dark screen...is there a brightness control which can be adjusted...its like its on power save mode or something..
Now its back flashing the O2 screen again its become terribly slow and unstable and I have to do a constant reset. How do I know which is my ROM to flash, I've flashed the R.30.07 ENG Rogers (4700 kB available) from http://www.romkitchen.de/WM2003/form.php.
I somehow feel that my O2 is not charging
Can you make any sense of this ..
Alvin
Hi
And another thing is that I trird copying the radio upgrade over to the card and then clicking on rsupgrade.exe. The upgrade fails at 1% giving an error as follows:
Flash Failed!
Press ok to restart your device.
What could be the problem? and how can I fix it?
Thanks
See http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Regards,
Neil.
Flash Failed
Neilius you have obviously not been through this process, no offence, but as i have tried to ask with a few posts on here it seems when the radio upgrade fails the wallaby refuses to charge. Which i think is the reason the radio upgrade always fails at 1%. Unfortunately nobodys knows or is even interested in finding out why
Flash Failed
Neilius you have obviously not been through this process, no offence, but as i have tried to ask with a few posts on here it seems when the radio upgrade fails the wallaby refuses to charge. Which i think is the reason the radio upgrade always fails at 1%. Unfortunately nobodys knows or is even interested in finding out why
No Charge no back light
Hi,
I have flkashed my rom but I cant get the RSU upgrade done.Now I have a running O2 with no backlight and it does not charge....where do I go from here....please reply my life is a meess without my O2 is it time for a change...howz the O2 mini or the imate JAmin fed up with this GSM error.
Alvin
Dear members
I was really very desperate to try my hands on ROM upgrading since I got my Atom life. But inspite of all ROM being available here I am not able to upgrade my ROM because it has to be done through mini-sd. I don't know whats going wrong but here are the issues I have faced:
1.I am not able to get the Record+Reset working on my Atom life.
2.I have found somewhere in this forum that 2gb minisd does work. is this correct?
3.Can there be any alternative way to get this device upgraded like we use to do in HTC devices.
I wish to know from all the users if they are having answers for these questions.
This is a must have for a thread for Atom, but couldn't find any dedicated solution to this procedure of upgrade.
Hope to get some solution soon.
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------
What you see above were the most expected questions of a newbie to ROM upgrading in O2 Atom Life[O2 comet]
Here is the most simple guide in upgrading the device. This is based on my personal experience so any deviation ca be expected in case you do it yourself. But most of the steps are just ubiquitous in case of any attempt at upgrading the ROM in Atom Life[O2 comet]
--------------------------------------------------------------------------------------------
INSTRUCTIONS:
Formatting card & setting the file type to fat16 or fat on your PC or with the help of any pocket pc application.
Then you need to copy the file[xxx.DIO] on your memory card[not in any folder] Just reset the device pressing record[in right middle side] along with stylus in the softreset hole[in the left botton side]
Take Stylus out first & then keep pressing the record button until black screen with minisd detect appears.
Thats it. Now it will start installing the ROM from the memory card.
Things to remember:
1.get 1gb or less card[2gb won't do at times]
2.Format it in windows or in your ppc in either fat or fat16 format[don't do fat 32 it won't work]
3.Copy the file on the memory card[not to any folder in it]
Hope the guide will help you & you will have no problems in updating the phone reply if there is any problem.
Regards
Saksham Katyal
W/O RUU for Atom life it is a hard nut to upgrade ROM in Atom life. I hope develpors may have some answer for this.
sakshamkatyal said:
Dear members
I was really very desperate to try my hands on ROM upgrading since I got my Atom life. But inspite of all ROM being available here I am not able to upgrade my ROM because it has to be done through mini-sd. I don't know whats going wrong but here are the issues I have faced:
1.I am not able to get the Record+Reset working on my Atom life.
2.I have found somewhere in this forum that 2gb minisd does work. is this correct?
3.Can there be any alternative way to get this device upgraded like we use to do in HTC devices.
I wish to know from all the users if they are having answers for these questions.
This is a must have for a thread for Atom, but couldn't find any dedicated solution to this procedure of upgrade.
Hope to get some solution soon.
Click to expand...
Click to collapse
Hi guy, can only adv you the pt(1) + (2)...
1.I am not able to get the Record+Reset working on my Atom life: You must Press Record + Reset, leave Reset first.
2.I have found somewhere in this forum that 2gb minisd does work. is this correct: Yes, I always use 2G SD to up ROM (make sure there's no any file in SD excepted AL1.DIO)
Good luck!
I didn't get you my friend. plz be more clearer.
1. Press Record + Reset, then leave Reset first but still keep pressing Record. AL will be in Bootloader mode for yr up ROM by SD.
2. For up ROM by SD, I always use 2G SD to up ROM (make sure there's no any file in SD excepted AL1.DIO).
3. AL can support 4G SD w/o no any problem, not yet test for 8G SD.
bravedoan said:
1. Press Record + Reset, then leave Reset first but still keep pressing Record. AL will be in Bootloader mode for yr up ROM by SD.
2. For up ROM by SD, I always use 2G SD to up ROM (make sure there's no any file in SD excepted AL1.DIO).
3. AL can support 4G SD w/o no any problem, not yet test for 8G SD.
Click to expand...
Click to collapse
have u tried flashing using a 4G card?
2G cards never worked for me. I use a 512M card for flashing. Without RUU u can't flash a custom ROM.
but maniac i have seen you claiming that 2gb card does work. thats whar made me confused.thanx allover..anybody tried 8gb on life with minisd adaptor.
sakshamkatyal said:
but maniac i have seen you claiming that 2gb card does work. thats whar made me confused.thanx allover..anybody tried 8gb on life with minisd adaptor.
Click to expand...
Click to collapse
naah. i dont think I have ever mentioned that before. If I have, then its by mistake. My bad then.
@Maniac, Don't bother brother. May be it could have been because of some mistake or may be in some other context.
Anybody tried 8gb microsd with minisd adaptor. Actually I wish to post results myself but the problem is that its not available in my city so have to order from ebay so a bit reluctant if it doesn't work.
Thanks & Regards
Saksham Katyal
My suggestion. Keep a smaller mini SD for flashing and a higher capacity card for other purposes. From my personal experience of using a 4GB card. Read is quite slow at times. It could also give issues while booting if you install applications on memory card.
I think I have no other option but to buy one. Hope it won't turned out to be a bad deal.
@maniac, bro why you have this slow reading problem when I don't imagine this can be there in such a high model PPC.
Moreover let me confirm everybody once again that the 2gb minisd won't work for ROM upgradation but 1gb does work like charm so try it w/o any doubts. It is confirmed as I have experimented with few of the phones.
I don't know if this may help you:
http://forum.xda-developers.com/showthread.php?t=401336&page=1
http://forum.xda-developers.com/showthread.php?t=401336&page=2
sakshamkatyal said:
I think I have no other option but to buy one. Hope it won't turned out to be a bad deal.
@maniac, bro why you have this slow reading problem when I don't imagine this can be there in such a high model PPC.
Moreover let me confirm everybody once again that the 2gb minisd won't work for ROM upgradation but 1gb does work like charm so try it w/o any doubts. It is confirmed as I have experimented with few of the phones.
Click to expand...
Click to collapse
Speed of the processor has got nothing to do with the SD card reading speed. It all depends on the card driver. My 4 GB is a pain at times.
maniac2403 said:
have u tried flashing using a 4G card?
2G cards never worked for me. I use a 512M card for flashing. Without RUU u can't flash a custom ROM.
Click to expand...
Click to collapse
2G is working for me. Never test 4G to flash ROM.
Really bravedoan? Thats a surprise I must say for me atleast as it didn't work for me. Anyway thanx for your reply. Any idea of 8GB working on Life?
sakshamkatyal said:
Dear members
I was really very desperate to try my hands on ROM upgrading since I got my Atom life. But inspite of all ROM being available here I am not able to upgrade my ROM because it has to be done through mini-sd. I don't know whats going wrong but here are the issues I have faced:
1.I am not able to get the Record+Reset working on my Atom life.
2.I have found somewhere in this forum that 2gb minisd does work. is this correct?
3.Can there be any alternative way to get this device upgraded like we use to do in HTC devices.
I wish to know from all the users if they are having answers for these questions.
This is a must have for a thread for Atom, but couldn't find any dedicated solution to this procedure of upgrade.
Hope to get some solution soon.
Click to expand...
Click to collapse
Can you help please?. My rw6815 after upgrading to wm6.1 of Biohazard cable / pc is total block. Before I left the blue screen of Biohazard. Today, after many restarts I managed to bring up the black screen with writing "Device clean boot ...... reset to factory default !!"""". I attacked the usb to PC for power and possible connections to the PC . But an hour has not changed and the computer screen does not acknowledge it. What do I do ????? Greetings Raphael. Translated from Italian by Google.
Oh Poor dib,
Mate this handset seems to me is identical to O2 Atom phone. So its better if you just check out a similar thread catering to Atom users. Try Wiki if it can help. We are users of Atom life which is not the phone which you are asking about. I could have helped you had it been an HTC phone which I used for long time. But this is my first O2 phone so can't help much. Hope someone knows about this problem comes out with its solution. Good luck brother.
Regards
Saksham
dib0231 said:
Can you help please?. My rw6815 after upgrading to wm6.1 of Biohazard cable / pc is total block. Before I left the blue screen of Biohazard. Today, after many restarts I managed to bring up the black screen with writing "Device clean boot ...... reset to factory default !!"""". I attacked the usb to PC for power and possible connections to the PC . But an hour has not changed and the computer screen does not acknowledge it. What do I do ????? Greetings Raphael. Translated from Italian by Google.
Click to expand...
Click to collapse
Just out of curiosity, do you have an external storage card inserted?
I inserted a 1gb miniSD from FAT32.
I think you have not followed the instructions carefully. Follow the instructions by formatting card & setting the file type to fat16 or fat on your PC or with the help of any pocket pc application. Then you need to copy the file[xxx.DIO] on your memory card[not in any folder] Just reset the device pressing record[in right middle side] along with stylus in the softreset hole[in the left botton side]
Take Stylus out first & then keep pressing the record button until black screen with minisd detect appears.
Thats it. Now it will start installing the ROM from the memory card.
Things to remember:
1.get 1gb or less card[2gb won't do at times]
2.Format it in windows or in your ppc in either fat or fat16 format[don't do fat 32 it won't work]
3.Copy the file on the memory card[not to any folder in it]
Hope the guide will help you & you will have no problems in updating the phone reply if there is any problem.
Regards
Saksham Katyal
hello pal i am using new gene with sumits vanilla manilla
rom
my phone it automatically is on loud speaker when i call or recieve
when i am connecting my head phone it is not responding
i am not able to connect to active sync or to usb mode
coz i wanted to flash my gene with new rom
my headphone works when i try to restart my phone by connecting the headphone at the time of restart
i know that it is not hardware problem plz help me man plzzzzzzzzzzz
went to boot loader and no usb word coming there
update---------------------------------------------------------------------------------------------------------
my loudspeaker problem got solved for Rs 500 and i am still not able to connect to active sync . i am using new gene with original gene rom,i flashed my phone with memory card can anyone help me in connecting to activesync
keshavmalu1 said:
hello pal i am using new gene with sumits vanilla manilla
rom
my phone it automatically is on loud speaker when i call or recieve
when i am connecting my head phone it is not responding
i am not able to connect to active sync or to usb mode
coz i wanted to flash my gene with new rom
my headphone works when i try to restart my phone by connecting the headphone at the time of restart
i know that it is not hardware problem plz help me man plzzzzzzzzzzz
went to boot loader and no usb word coming there
Click to expand...
Click to collapse
i have had same problem with sumit and other manilla rom but it solved by itself.do hard reset....or try another rom.or if u still want to stick to that try to change pagepool.also plz use few third party applz......
i observed in last 2 weeks these types of problems are happening with wm6.1,ill recommend wm6.5 for all guys who dont want face these annoying errors...
deathgame said:
i observed in last 2 weeks these types of problems are happening with wm6.1,ill recommend wm6.5 for all guys who dont want face these annoying errors...
Click to expand...
Click to collapse
hey hows your work of genero?can u tell me how can i intergrate opera and remove PIE/ means what i have to remove from packages to completely remove PIE/
saurabh88 said:
hey hows your work of genero?can u tell me how can i intergrate opera and remove PIE/ means what i have to remove from packages to completely remove PIE/
Click to expand...
Click to collapse
for removing PIE5-(WM6.1)-
BROWSING
Browsing_DPI_96
Browsing_Lang_0409
BROWSINGCORE
for removing PIE6-(WM6.5)-
BROWSING
Browsing_DPI_96
Browsing_Lang_0409
BROWSINGCORE
browsingie
browsingie_LANG_0409
----------------------------------
i think we cant remove PIE from ROM because it supports some other applications(not confirmed ask for sumit).
I am waiting for correct version of WM6.5 to continue my work on GENERO..and iam quite confirm that next versions of 23049 will be nice!
Yes the First 4 browsing* folders support SMS and EMail functionality so it will break if you remove those 4 packages. Browsingie and Browsingie_lang_0409 can be removed though. In WM 6.1 this would cause Internet Explorer 6 to behave like 5.5. It wont render HTML pages good, it will work only for WAP sites. In WM 6.5, it would also cause the Widgets platform to stop working since it depends on the MSHTML.dll and other files inside it.
Ya, i too have a bit good expectations from 230xx series, the next build should be good, however that would only happen if they didn't made any changes to the feature list. Introducing new features causes more bugs. And looking at the COM4 tree (234xx), i think the new Contacts application that appeared in 23412 build may also come in any of the next build of 230xx Lets see!
download original rom from http://rapidshare.com/files/150494470/RUU_Signed.nbh.html (new gene)
http://www.mediafire.com/download.php?n1ydj4mzlyg (old gene )
1. Format your SD card to FAT32.
2. Just rename downloaded the file as GENEIMG.nbh and copy into your SD card.
3. Hold the camera button then press the soft reset button while holding the camera button.
4. Press the down volume when it asks you to press something.