Just a little info -I discovered at the weekend. I have been playing with the wm5 1.60a for a while and in orfder to save space in the storage i have installed a lot of programs on the extended_rom partition. I renamed this via the registry. Don't do this !as it really screws things up. You end up with two extended rom plabels in explorer and you can not rename them back. I have had to reinstall wm5 1.60a
I dont see any problem installing program in Extended ROM. All you have to make sure is you have to rename the Extended ROM BEFORE you install anything.
If you rename it AFTER then surely you are going to be screwed. Because the program installed in the extended ROM is registered in the registry as whatever name the extended ROM when the program are installed.
Can you please be more specific with your problem. If not I think your post is "misleading".
True
In summary you are correct. I should have renamed Extended_rom before installing programs to it.
However when you reset the machine the operating system creates a new folder called extended rom and puts the renamed extended rom data and programs in it.
The original renamed folder with the memory chip icon is also present in the directory view so the data appears twice.
odd to say the least
I dont have the problem that you described.
When I install WM5 v 1.60a. I immediately rename it to "STORAGE" then install program in it. I have been using version 1.60 for more than a week now and I have countless Soft Reset even Hard Reset(Persistent memory right?) and no double folder and anything.
Just follow my advice and rename it at the beginning. I am sure you wont have the problem.
Hi,
This has most likely been covered but can someone tell me how do I rename storage areas. I have WM2005 1.60a Rom Thanks to Buzz.... and I as defalt run out of storage memory really quick and my program memory is massive, I am really sorry if this has been cover so even if you could point me to where it is discussed.
Thanks Heaps.
where can i download wm 2005
where can i get the latest wm 2005 rom?
found a link but the files is corrupted?
can anyone of you help me to have this latest rom.
seal said:
Hi,
This has most likely been covered but can someone tell me how do I rename storage areas. I have WM2005 1.60a Rom Thanks to Buzz.... and I as defalt run out of storage memory really quick and my program memory is massive, I am really sorry if this has been cover so even if you could point me to where it is discussed.
hi Schen i try to rename the ext_ROM but it say can not rename it tell me what should i do pls
Click to expand...
Click to collapse
Re: where can i download wm 2005
arquizon said:
where can i get the latest wm 2005 rom?
found a link but the files is corrupted?
can anyone of you help me to have this latest rom.
Click to expand...
Click to collapse
U can get it at buzzdev.net
Goodluck....n rgds
Leslie Lee
I tried download 1.6a at buzzdev.net but is" index" only ,can u help
HI, SCHEN
Can u help me how to change the ext_rom to storage step by step?
I am new user , I don't even know where can i find the ext_rom to rename and someone told that i can't rename the ext_rom.
ymchow said:
Leslie Lee
I tried download 1.6a at buzzdev.net but is" index" only ,can u help
Click to expand...
Click to collapse
u go to site http://buzzdev.net
U need to register. registration is free.
u can then download.
there r 5 versions of wm2k5 for himalayas there
regards n best wishes
Thank! Leslie Lee I had download successfully
Related
So is there a way I can do this on my G4 8125? I've been trying, but have not been successful.
Extended ROM basically consists of large number of CAB files. Go to the ftp and get hold of some of the ROM packages in ZIP format and unzip the EXT rom. Unlock your EXT ROM and replace everthing with the one you've downloaded. Done.
Personally, I don't use Ext Rom. Upon hard reset, I just skip the Ext Rom installation and I install my stuff manually, which I think gives more flexibility. I had my phone backup-ed into an EXE file which I can use when I hardreset next time.
I don't know how to unlock it, and I can't even stop my Cingular one from installing every time.
To stop it from installing, upon hardreset, softreset your phone just after the security option (eg when it asked you to set your PIN for the phone). It should skip installing the EXT ROM.
I'm not sure if it is read only or not, but you can try. Download and open Total Commander (for PPC), at the top section of TC, enter this
Code:
\Extended_ROM
It will show you stuff in your Ext Rom. See if you can overwrite it.
If the extended_rom is protected like in G3 >2.xx SPLs then you have no luck there. Even if you change something and it looks like it worked you'll get bad checksums on next soft-reset and all data in extended-rom will be deleted
mestrini said:
If the extended_rom is protected like in G3 >2.xx SPLs then you have no luck there. Even if you change something and it looks like it worked you'll get bad checksums on next soft-reset and all data in extended-rom will be deleted
Click to expand...
Click to collapse
exactly what happened to me.
after it had bad checksums, strange characters and folders, i formatted the extemded rom using wizard service tool ver 4.2.1
now my extended rom is empty... but i have a copy of it on the PDA in a different folder and on my PC.
Is there a way to restore it?
royorlev said:
exactly what happened to me.
after it had bad checksums, strange characters and folders, i formatted the extemded rom using wizard service tool ver 4.2.1
now my extended rom is empty... but i have a copy of it on the PDA in a different folder and on my PC.
Is there a way to restore it?
Click to expand...
Click to collapse
Absolutely. Simply use WST and select the "Write ROM" option. Then select "Extended ROM" and upload the backup from your PC.
Hi All,
Is there any way to build own ExtROM?
Thanks
For Atom / Atom Pure / Atom Exec: Use WinImage Version 8.1 or similar program to edit IMG file. There are many programs that can do it.
Do not touch folders found in this image file. Programs that depend on these folders are: FM Radio, AutoConfig, WirelessManager, Camera, Equalizer, Album (life), ImageEditor (life)
The version of the Extended Rom is taken from the text file:
061020_AL1ARCWWE_EX0604.txt
The name is picked up versionCPAapplet.cpl (found in Settings->System Info)
So far, I did not encounter any problems changing the version numbers
The default folder name for this partition on your device is \_QHiddenPartition\ However, when we unlock this hidden partition at device runtime, we can not use the same folder name to install programs and lock it afterwards.
Normally, I used this partition to place the cabs I want to install at hard reset. This is no longer a problem with the cooked ATOM/ATOM EXEC ROMs we made because, serialzs introduced MortScript to do the automatic installation of cabs found in \_QHiddenPartition\ and \cabs\ folder found in storage card.
It is not necessary, however, to unlock the hidden partition just to edit the contents at device runtime. You can always use Total Commander to browse this partion by keying \_QHiddenPartition\ on the location bar.
For ATOM LIFE users, you can simply remove the 12-byte header of IMG file, and WinImage 8.1 can be used to edit the file. You need to restore the 12-byte header prior to flashing your device again.
tj your are very kind ^^;
Last time i ask.you say search.
i use search but still confuse cause alot of topic.
but now you posted this info.
THANKS YOU
thank you,i'm trying to cook and release WM 7.0 tonight. j/k
How to remove or add programs being install in order??? I found that del *.cab to remove the programs and copy *.cab to auto install the programs from extended rom. But i don't know the file where listed the programs is able install in the extended rom at hard reset. In the past,when i cooked BA rom, i remember that i can edit the file include the paths of the cabs I want to auto install at flash rom or hard reset.
jiggs said:
For Atom / Atom Pure / Atom Exec: Use WinImage Version 8.1 or similar program to edit IMG file. There are many programs that can do it.
Do not touch folders found in this image file. Programs that depend on these folders are: FM Radio, AutoConfig, WirelessManager, Camera, Equalizer, Album (life), ImageEditor (life)
The version of the Extended Rom is taken from the text file:
061020_AL1ARCWWE_EX0604.txt
The name is picked up versionCPAapplet.cpl (found in Settings->System Info)
So far, I did not encounter any problems changing the version numbers
The default folder name for this partition on your device is \_QHiddenPartition\ However, when we unlock this hidden partition at device runtime, we can not use the same folder name to install programs and lock it afterwards.
Normally, I used this partition to place the cabs I want to install at hard reset. This is no longer a problem with the cooked ATOM/ATOM EXEC ROMs we made because, serialzs introduced MortScript to do the automatic installation of cabs found in \_QHiddenPartition\ and \cabs\ folder found in storage card.
It is not necessary, however, to unlock the hidden partition just to edit the contents at device runtime. You can always use Total Commander to browse this partion by keying \_QHiddenPartition\ on the location bar.
For ATOM LIFE users, you can simply remove the 12-byte header of IMG file, and WinImage 8.1 can be used to edit the file. You need to restore the 12-byte header prior to flashing your device again.
Click to expand...
Click to collapse
cdmavn said:
How to remove or add programs being install in order??? I found that del *.cab to remove the programs and copy *.cab to auto install the programs from extended rom. But i don't know the file where listed the programs is able install in the extended rom at hard reset. In the past,when i cooked BA rom, i remember that i can edit the file include the paths of the cabs I want to auto install at flash rom or hard reset.
Click to expand...
Click to collapse
The script runs through all cabs present in the the two locations stated above. You don't have to edit any list like you do for AutoRun in BA. Also, AutoRun does not work with cab installation that require user interaction. Now, as for your question regarding the order they go - it's alphabetical.
Hi jiggs!!
You awesome! I have added my operator in autoconfig list, all work fine, now I have all settings for my operator!
THANKS A LOT!!
interesting in rom cooking, thats what i.m always thinking about,.
but i'm afraid to do this, i'm afraid i'll bring my atom unusable,.
thanks anyway jiggs,.
ex.image said:
Hi jiggs!!
You awesome! I have added my operator in autoconfig list, all work fine, now I have all settings for my operator!
THANKS A LOT!!
Click to expand...
Click to collapse
Pls post your settings for others, too. Thanks.
jiggs said:
For ATOM LIFE users, you can simply remove the 12-byte header of IMG file, and WinImage 8.1 can be used to edit the file. You need to restore the 12-byte header prior to flashing your device again.
Click to expand...
Click to collapse
how do you remove 12-byte header?
ichanz said:
how do you remove 12-byte header?
Click to expand...
Click to collapse
Open the file with an HEX-editor, cut the first 12 bytes and save the file. That's all.
You can use "XVI32". This Hex-editor is included in the original Scooter-ROMkitchen.
Hi all,
I use remotePROTECT as a security measure on my Atom - I find the program great.
It will be even better if I place it in extROM (hidden partition) so that it will install again upon hard reset.
I've followed the instructions that come with the software - they require me to place the program's CAB file in the extROM along with the setupE file.
I tried that - did a hard reset and nothing happened - didn't install.
I have an O2 Atom with an official ROM release installed.
Is there anything else I need to do? I note there is an Autoinst.dat file in the hidden partition, but it's encrypted or gibberish so I can't do much with it.
If I've overlooked anything can someone please suggest what I can do to make this do what I want - install itself again after hard reset.
Thanks in advance.
Avocado said:
Hi all,
I use remotePROTECT as a security measure on my Atom - I find the program great.
It will be even better if I place it in extROM (hidden partition) so that it will install again upon hard reset.
I've followed the instructions that come with the software - they require me to place the program's CAB file in the extROM along with the setupE file.
I tried that - did a hard reset and nothing happened - didn't install.
I have an O2 Atom with an official ROM release installed.
Is there anything else I need to do? I note there is an Autoinst.dat file in the hidden partition, but it's encrypted or gibberish so I can't do much with it.
If I've overlooked anything can someone please suggest what I can do to make this do what I want - install itself again after hard reset.
Thanks in advance.
Click to expand...
Click to collapse
If you have read the first post carefully, then you will understand that this won't work because the built-in AutoInstall of the official ROM restricts to signed CABs only as defined by list with no known format as of this date. That's why we have cooked ROMs to bypass this and created another AutoInstall script. There are work arounds for your purpose but definitely this solution is not for you. You have to do some research on this forum.
Anyone knows how to change or create new network settings. I found xml files in network folder and asked if there is a way to have my personal network settings like auto sms delivery or auto configure vms numbers or ...
vocian said:
Anyone knows how to change or create new network settings. I found xml files in network folder and asked if there is a way to have my personal network settings like auto sms delivery or auto configure vms numbers or ...
Click to expand...
Click to collapse
you need to secure this from your operator.
although you can edit the xml files with notepad, I don't know if the GUID found there is important. you can also generate your own GUID to have a unique value.
select the existing xml that best fit your requirements and edit it. you can't edit the cabs found in the networks because they are signed. you need to provision your own cabs. it's more like provisioning certificates using cabs.
jiggs said:
you need to secure this from your operator.
although you can edit the xml files with notepad, I don't know if the GUID found there is important. you can also generate your own GUID to have a unique value.
select the existing xml that best fit your requirements and edit it. you can't edit the cabs found in the networks because they are signed. you need to provision your own cabs. it's more like provisioning certificates using cabs.
Click to expand...
Click to collapse
thank you very much indeed. I found xml files for defualt operator and also txt file wich list this operators. Gussed that first input my operator to that list and then create new xml. but i figured if any guide for what all of this xml comands mean and the whole format.
and another question : how to edit or change cabs? I have a background of programming with c++ and visual basic.net. Is it possible for me to create my own cab without too much effort? and with which compiler ?
tnx
jiggs said:
It is not necessary, however, to unlock the hidden partition just to edit the contents at device runtime. You can always use Total Commander to browse this partion by keying \_QHiddenPartition\ on the location bar.
Click to expand...
Click to collapse
Jiggs,
I am using an atom life, I fould that I could not browse the extended rom with Total Commander. In my memory, I should be able to use TC to browse the extended rom on my ATOM EXEC. Do you know what I am doing wrong?
By the way, is it possible to unhide the extended rom?
vocian said:
thank you very much indeed. I found xml files for defualt operator and also txt file wich list this operators. Gussed that first input my operator to that list and then create new xml. but i figured if any guide for what all of this xml comands mean and the whole format.
and another question : how to edit or change cabs? I have a background of programming with c++ and visual basic.net. Is it possible for me to create my own cab without too much effort? and with which compiler ?
tnx
Click to expand...
Click to collapse
use PocketPC Installation Creator to create cabs.
hh93220 said:
Jiggs,
I am using an atom life, I fould that I could not browse the extended rom with Total Commander. In my memory, I should be able to use TC to browse the extended rom on my ATOM EXEC. Do you know what I am doing wrong?
Click to expand...
Click to collapse
You must simply type \_QHiddenPartition in Total Commander to switch to Extended ROM.
Btw: It's described in the Atom Wiki. You should read it.
By the way, is it possible to unhide the extended rom?
Click to expand...
Click to collapse
Yes:
hit me
scorpio16v said:
Open the file with an HEX-editor, cut the first 12 bytes and save the file. That's all.
You can use "XVI32". This Hex-editor is included in the original Scooter-ROMkitchen.
Click to expand...
Click to collapse
Thanks!! The problem resolve after I remove the first 12 bytes.
For AtomLife ExtRom.img.
Anyone was successful to flash editted ExtRom.img of AtomLife with DSUU? If possible, could you please show me few experience to Update ExtRom via DSUU.
Ex: Remove 12bytes header/edit(add or remove anything can do)/restore 12bytes header. Then replace new ExtRom.img in \Window\temp\ExtRom.img and delete \Window\temp\FLASH.DIO while completed extract of DSUU running. Then imitate DSUU instruction. Is it right? This way, I cuccessed to new Flash.dio for AtomLife.
what is the virus susceptibility on wm6 unofficial roms since many or all files could be rewritten or copied from windows folder makes a backdoor for virusses unlike wm5 rom which doesn't let its files be copied to memory card from windows folder (e.g, battdrvr.dll).
you can copy sucj a system files because it is using it and dont allow to copy..
kamalneet said:
what is the virus susceptibility on wm6 unofficial roms since many or all files could be rewritten or copied from windows folder makes a backdoor for virusses unlike wm5 rom which doesn't let its files be copied to memory card from windows folder (e.g, battdrvr.dll).
Click to expand...
Click to collapse
with WM5 you can modify filesystem : same at WM6
with resco viewer it lets me copy or replace battdrvr.dll on wm6 roms but it wouldn't let me copy or even replace the battdrvr.dll ,that means when there is a virus attack it would currupt all wm6 writable memory which is bad this means rom should be made in such a way that rom section of memory should be un editable and read only it might also solve problem of memory leak due to read only files
kamalneet said:
with resco viewer it lets me copy or replace battdrvr.dll on wm6 roms but it wouldn't let me copy or even replace the battdrvr.dll ,that means when there is a virus attack it would currupt all wm6 writable memory which is bad this means rom should be made in such a way that rom section of memory should be un editable and read only it might also solve problem of memory leak due to read only files
Click to expand...
Click to collapse
Please don't take this as a challenge, and I'm not being sarcastic. I'm not that kind of person if you knew me, but with this great knowledge of yours about windows ce, I would really like to see a rom you cook for all of us
i know you r not that person which we think u r but i am only saying to cook readonly files , if i knew how to cook i wud be like u then . i wouldn't be here asking questions. discussing a possibility isn't wrong way to go but may be it would give someone newer idea to make more perfect roms.
kamalneet said:
i know you r not that person which we think u r but i am only saying to cook readonly files , if i knew how to cook i wud be like u then . i wouldn't be here asking questions. discussing a possibility isn't wrong way to go but may be it would give someone newer idea to make more perfect roms.
Click to expand...
Click to collapse
if you want to be a cook read this thread and follow the instructions, then you will be .
http://forum.xda-developers.com/showthread.php?t=325062
hi
before installing Tom rom I have decided to dump my original rom in case I needed to put it back.
anyway I have been able to dump the 4 Raw files. now I see that in the Kaiser section there is a guide on how to reconstruct a rom to make it flashable and I wonder if I can do the same with my Niki.
any expert could pls confirm this?
thanks in advance for your help.
cheers
edit: I ve just noticed that there are some other threads about this subject...anyway if someone can confirm the right procedure would be great. thanks
Yeah, also wondered about that Kaiser rebuilding tutorial.
Talked to a few people over PM who have the same problem.
But even in the Threads nobody who knows more about flashing/ROMs seem to be willed to help out with a fre informations. :-/
Still confused about the needed baserom in this thread.
-Is this available for Niki? (Where)
-Why do i need it / why can't i rebuild a rom ONLY with my phone and need something like a bsserom?
-if i use baserom from a english device, what will happen if I use with my german RAW files?
Thyraz said:
Yeah, also wondered about that Kaiser rebuilding tutorial.
Talked to a few people over PM who have the same problem.
But even in the Threads nobody who knows more about flashing/ROMs seem to be willed to help out with a fre informations. :-/
Still confused about the needed baserom in this thread.
-Is this available for Niki? (Where)
-Why do i need it / why can't i rebuild a rom ONLY with my phone and need something like a bsserom?
-if i use baserom from a english device, what will happen if I use with my german RAW files?
Click to expand...
Click to collapse
well..nice qustions..to which obviously I cant reply..hope someone will be so kind to help us out.
Thyraz said:
Still confused about the needed baserom in this thread.
-Is this available for Niki? (Where)
-Why do i need it / why can't i rebuild a rom ONLY with my phone and need something like a bsserom?
-if i use baserom from a english device, what will happen if I use with my german RAW files?
Click to expand...
Click to collapse
a baserom is nothing more then a normal rom, just put a rom you like, together with the dumped filen in the kitchen folder. maybe ruu needs some information from the rom file itself, which are not present on the device.
what you find on your device is just that what you dumped. (but after hardreset)
.. i know that this not matters for you anymore. but eroG needs to know.
therealholg said:
a baserom is nothing more then a normal rom, just put a rom you like, together with the dumped filen in the kitchen folder. maybe ruu needs some information from the rom file itself, which are not present on the device.
what you find on your device is just that what you dumped. (but after hardreset)
.. i know that this not matters for you anymore. but eroG needs to know.
Click to expand...
Click to collapse
well yes I defenitely needed to know these things...
now, if it is not of too much trouble for you, where do I find a baserom and is there a guide on how to do it...just to avoid stupid mistakes while doing it?
thanks a lot
So, from baserom there are not much information used. (Perhaps Header information for Rom file, or something like that)
My new ROM is (more or less) the same result as on my device?
And Baserom isn't a own file format, i can use the wwe-rom postet here in the forum?
thx for help
Thyraz said:
And Baserom isn't a own file format, i can use the wwe-rom postet here in the forum?
Click to expand...
Click to collapse
Yes that should work fine.
request guide on how to get dumped rom back to device
i've read alot about how to dump rom from device and how to get dumped rom back to device.
the more i read i got confident how to dump rom .... did it .. and now have my 4 raw files.
on the other hand the more i read about how to get dumped rom back to device ... more and more i got unsure how to do it.
so please all senior posters and specialists - can you please post a cookbook on how to get it back to the device ?
thanks ! alot and keep up the good work here !
Sackbauer, I totally agree with him.
I have 4 Raw files for a Norwegian ROM, but how do can i "transform" them into a acctually "flash" file?
Please someone with the knowledge, write a "easy to understand/ step by step" guide to the ones that don't have a clue about this..
Ole
im getting kinda confused with this also, dumping the rom is no big deal, but putting it back together and flasing my phone with it, thats the big how to...
I has contact with Tom.
And he busy with vietnamese new year now.
He said will back after 1,2 day and answer all questions..
Don't worry
... good to hear that tom will take care after his new year ;-)
also keep my fingers crossed that someone is able to check radio rom and possibly enable gps and wifi ...
let me try first:
- download this kitchen
- Copy your part01.raw and part02.raw into the BaseRom Folder of this kitchen
- Copy a Nike RUU_signed.nbh into the BaseRom Folder (e.g. tom_codons rom just open the. exe with winrar and extract the file)
- Open !Begin.cmd, press 2 and do everything, what is prompted
- Open !Cook.cmd and do what is prompted
- when HTC Rom Tool is opened press Rom_Builder and ... right from System. Then Choose os_new.nb and press built
i wrote this without testing again. so if i missed something tell me, please and i'll try to help.
sounds good !
will try it later this evening and will let you know ...
thanks so far
omg .... it appears that i just "cooked" my first rom out of my dumped files from my niki .
thanks therealholg for your guide !! thats what i was looking for.
the only thing which makes me a bit nervous about reflashing my just cooked rom onto my device is that during cooking it sometimes says "file not found".
but after ignoring these messages i have a nbh file which obvioulsy was not in the folder before !!! ;-) yeah
so, now i know how to revert the process but i am to anxious to try it as this is my only niki.
lets see and wait what others say about the step by step guide of therealholg ...
in anyway - you made my day therealholg
cheers
wow... thanks for this...
tryed it out and works...
the only thing is that it still says Niki Project on the boot screen...
everything else works just fine
marazi said:
wow... thanks for this...
tryed it out and works...
the only thing is that it still says Niki Project on the boot screen...
everything else works just fine
Click to expand...
Click to collapse
You can add the splash screen in HTC Rom Tool.
therealholg said:
let me try first:
- download this kitchen
- Copy your part01.raw and part02.raw into the BaseRom Folder of this kitchen
- Copy a Nike RUU_signed.nbh into the BaseRom Folder (e.g. tom_codons rom just open the. exe with winrar and extract the file)
- Open !Begin.cmd, press 2 and do everything, what is prompted
- Open !Cook.cmd and do what is prompted
- when HTC Rom Tool is opened press Rom_Builder and ... right from System. Then Choose os_new.nb and press built
i wrote this without testing again. so if i missed something tell me, please and i'll try to help.
Click to expand...
Click to collapse
What to do with part00.raw and part03.raw?
Part00.raw is the are with IPL, SPL and Splashscreen. We don't want to override our new SuperCID Bootloaders
Part03.raw is content of your local storage ... i think you can't flash this area with ruu.
hi all friends...!
I'm just back from some days busy with vietnamese new year.
And have made code kitchen for reconstruct a dumped rom niki device.
What we need to do now ?
1. Copy part02.raw u dumped from original rom to Tools folder and run step1.bat
2. Extract RUU_signed.nbh from Ship rom and put in ShipRom folder.
Link download :
http://www.asia.htc.com/download/RU....707.09_Radio_Nike_1.58.16.27_signed_Ship.zip
Or here :
http://www.asia.htc.com/download/RU....871.14_Radio_Nike_1.58.16.27_signed_Ship.zip
3. Run Reconstruct a dumped rom.cmd in my Tools and wait some times.When page DOS done it will exit .U go to Update_Rom folder already have new RUU_signed.nbh.This files reconstructed your original Rom with your languages.
Have funs..!
This ROM has had everything I can remove without causing instabilities removed.
There is no ExtROM with this, but one can be added very easily.
With the addition of an extROM, UC can be used (SDAutoRun is in the windows directory)
This is intended for ROM cooks, and so I won't attach any upgrade utilities. It is an OS.nb rather than an nk.nbf for the purposes of saving space.
Some packages can be found here: http://forum.xda-developers.com/showthread.php?t=371497
This uses SDautorun V2 so is suitable for multi-language use.
I will upload a version suitable for flashing in the near future.
Based on multiple ROMs including official Kaiser, Touch and WM5 Prophet ROMs. This is a WM6.1 ROM.
Contains Mail, Contacts, Calendar, internet explorer and phone functionality.
Internet Explorer and help files have been removed in the new version!
http://rapidshare.com/files/102087207/newos.zip.html
v2
http://cid-cddbf77985693632.skydrive.live.com/embedrowdetail.aspx/XDA%20files/ROMs/Clean
Reserved for updates.
thx my friend
i think i will use it to start cooking a room =)
Thanks a lot
exactly what i am looking for ,
I will download it as soon as possible
thanks,thanks,thanks,.........
I have been waiting for this !
Can you inform us about free storage space after fresh flash? And how is the speed?
Thanks
Hi, how to flash is rom image OS.nb using which flashing tools? cos the new method is flashing the rom image nk.nbh.
can i use the new method of flashing?
Thanks in advance
Cheers
Thank a lot
there is about 55mb storage and 30mb program memory, but I've just realised I left the help files in! there is also the extROM with nothing in it, so in total 65mb free. I shall change the registry so it is unhidden/unlocked when I upload the update. I will also remove some other programs.
The new WM6 upgrade guide shows how to convert the *.nb into a *.nbh for flashing.
I shall upload an update when I can.
is downloading it, thanks, mate.
l3v5y said:
This ROM has had everything I can remove without causing instabilities removed.
There is no ExtROM with this, but one can be added very easily.
With the addition of an extROM, UC can be used (SDAutoRun is in the windows directory)
This is intended for ROM cooks, and so I won't attach any upgrade utilities. It is an OS.nb rather than an nk.nbf for the purposes of saving space.
Some packages can be found here: http://forum.xda-developers.com/showthread.php?t=371497
This uses SDautorun V2 so is suitable for multi-language use.
I will upload a version suitable for flashing in the near future.
Based on multiple ROMs including official Kaiser, Touch and WM5 Prophet ROMs. This is a WM6.1 ROM.
Contains Mail, Contacts, Calendar, internet explorer and phone functionality.
Link http://rapidshare.com/files/102087207/newos.zip.html
Click to expand...
Click to collapse
Hi, I have downloaded the file, it is a newos.nb. i wonder how i can flash my ROM as it is a .nb file rather than a . nbf? ?
mantis123 said:
Hi, I have downloaded the file, it is a newos.nb. i wonder how i can flash my ROM as it is a .nb file rather than a . nbf? ?
Click to expand...
Click to collapse
See post #8.
Help me please. Who have internet sharing in cab file?
l3v5y said:
there is about 55mb storage and 30mb program memory, but I've just realised I left the help files in! there is also the extROM with nothing in it, so in total 65mb free. I shall change the registry so it is unhidden/unlocked when I upload the update. I will also remove some other programs.
The new WM6 upgrade guide shows how to convert the *.nb into a *.nbh for flashing.
I shall upload an update when I can.
Click to expand...
Click to collapse
May we know when the updated one comes??
I'll finish it when I am at home and have some free time. I have a few deadlines coming up so might not be till the weekend.
I'm uploading a new version to my skydrive account... It consists of two seperate parts, OS.nb and ExtROM.nb. These will need to be combined for flashing (see the "new wm6 upgrade guide")
When uploaded it will be available here: [FONT="]http://cid-cddbf77985693632.skydrive.live.com/browse.aspx/XDA%20files/ROMs/Clean[/FONT]
If someone wants to mirror it please do, I don't have the time to now.
thanks very good
hi l3v5y,
on this v2 the problem of ring is ok, because on the first one i can't change the ring tone
I removed most of the default ringtones for space. If you put one into the \My Documents\Ringtones directory I think it should work.
I normally have my prophet set to vibrate so I wouldn't have noticed this :S.
i will try and tell you for the V2
Tkanks very much!