For all,
I have two computers both with XP Professional with ActiveSync 4 one of them can not connect My XDA II WM 1.50i with the Excheange Server of my work, what could be wrong?
The second PC work 100%
Also the XDA II conection with Excheange Serve through GPRS works 100%
somebody can help.
thank
did you try all the firewal setiting and the like?
the exchange i think must be the last one or 2003 but i not certain about that
you can try first the firewall settings of that xp and what error do you have
its the last version of activesync 4?
hope thats helpfull
Re: did you try all the firewal setiting and the like?
rictec said:
the exchange i think must be the last one or 2003 but i not certain about that
you can try first the firewall settings of that xp and what error do you have
its the last version of activesync 4?
hope thats helpfull
Click to expand...
Click to collapse
The ActiveSync is show this erro: Support Code:85020010
The ActiveSync Also asks to verify the connection, however as the xda works ok with another PC XP and with GPRS I do not know what to do.
try the fireall setting
try to see if in that pc the firewall settings are permisive
that problably a firewall prob but....
do you have outlook 2003 instaled in that machine also try to connect with it already open that solved my problem once and i have to open it first since
as a last resort do a new partnership
do like this on that machine thats not working
disable firewall
remove all mobile devices in file->delete mobile devices
open task manager and end process wcescomm.exe and wcesmgr.exe
them open device manager
look in usb ports
connect your device and when a usb device appears remove it (problably windows mobile device but you will see it )
remove the device and restart the pc
when restarted open outlook just in case
activesync will autostart
put you device in and create a patnership
this was what i had to do whem first instaled buzzmobile2005
hope this help you too if it doesnt
try
http://wiki.xda-developers.com/index.php?pagename=ActiveSync4
Re: try the fireall setting
rictec said:
try to see if in that pc the firewall settings are permisive
that problably a firewall prob but....
do you have outlook 2003 instaled in that machine also try to connect with it already open that solved my problem once and i have to open it first since
Click to expand...
Click to collapse
Again I revised the connection of the firewall PC1 x PC 2 the look identical.
Same version of Outlook no diference if Outlook is open
This is drive'me crazy
Re: as a last resort do a new partnership
rictec said:
do like this on that machine thats not working
disable firewall
remove all mobile devices in file->delete mobile devices
open task manager and end process wcescomm.exe and wcesmgr.exe
them open device manager
look in usb ports
connect your device and when a usb device appears remove it (problably windows mobile device but you will see it )
remove the device and restart the pc
when restarted open outlook just in case
activesync will autostart
put you device in and create a patnership
this was what i had to do whem first instaled buzzmobile2005
hope this help you too if it doesnt
try
http://wiki.xda-developers.com/index.php?pagename=ActiveSync4
Click to expand...
Click to collapse
Thank for trying to help I already had looked at the notations on the ActiveSinc I have the impression that the problem is a DLL in the XP the solution perhaps is to reinstall everything again.
Curiosity: What it means NSPS in your ExtRom topic
reinstall everything?
seach in the forum if none o what i sad worked there is some dlls i see somewhere you can remove and reinstall.
well if it didnt work and reinstall is a possibility do it
remember service packs
my ntsp in extended rom is :never twice the same programs......lol
good luck
Related
Hi,
I am sure these questions have been asked a thousand times but I have searched for the last 30mins through the boards and cant find any.
I have been given an XDA which is locked to O2, I have a cradle with a USB connection. The software CD however is broken. I have plugged in the USB and allowed Windows to search for a driver for the new hardware (I have XP home) which it doesnt do. I have searched to download the software which is on the CD but I cant find any. Could anyone please advise me what my first steps are?? The XDA is on fine I just cant connect it to my laptop.
I have seen manyu ask about unlocking so Ill follow those examples.
Hope someone can help really want to get this XDA working.
You need to install Activesync...use google, or check the main pocket pc pages, 3.8 is released a few days ago.
No drivers are needed!
just download MS ActiveSync 3.8 from here:
http://www.microsoft.com/downloads/...21-8a85-45a2-8d13-653beb6cdddc&DisplayLang=en
Enjoy :wink:
Thanks for the help.
This may sound stupid but I have downloaded activesync and run the .exe file it copies the files then does nothing. It doesnt provide me with an application to start.
Anyone had the same problem?
It should appear on your programs menu on the desktop, try plugging in your xda to the usb and firing up activesync on the xda if it doesnt start automatically.
It shall ask you to connect your device to the cradle..
After installation, put your device in the cradle, and wait till the USB port detects the device...
You shall see the ActiveSync window after that. If not, then check your USB ports.
What version of Windows you have? WinXP?
I have Windows XP home.
Ok ill talk you through the steps I have done.
1. I downloaded activesync and ran it. Copied files but didnt produce an application.
2. Put XDA in the cradle and connected to my laptop through USB. Windows detects new hardware.
3. I have tried for Windows to look for the software but then it doesnt find anything.
I have also tried to open up active sync on the XDA whilst it is connected to my laptop, activesync opens fine on the xda but it doesnt fire anything up on the laptop.
ActiveSync 3.8 System Requirements:
http://www.microsoft.com/windowsmobile/downloads/as-sysreq38.mspx
I don't think its a problem in your Windows!
try to install ActiveSync 3.7.1 from here:
http://www.microsoft.com/windowsmobile/downloads/activesync37.mspx
If it didn't work, then double check the cradle's USB cable, maybe its not well connected to the PC or maybe its defected!
Otherwise, ActiveSync shall work like a charm!
Tried that too. Thanks for the help though.
I think its something to do with my operating system as the older version of activesync also doesnt provide an application to open.
delete the unrecognized PDA from the device manager, then plug it in again.
I've got ActiveSync 3.8 and I'm XP Pro SP2. XP does not see the XDA in the cradle. I've tried everything I can think of. Are you sure no driver is required? I read in the O2 help that you can plug the cradle into a hub but I've got a brand new motherboard that has several ports. I've tried all the ports but XP never sees the device.
Hi, in response to the questions above have you gotten the ActiveSync to open up at all? Also, when you plug in the cradle does Windows acknowledge the cradle connection or not?
Firewall ...
I had a similar problem and had a firewall running (not the Windows XP one). ActiveSync needs to connect to the PC through 127.0.0.1. If the firewall blocks that it can't see the device. It opens fine, says it's connected (in this case) but the phone registers no connection .... might be something to look at.
I installed 2005, and couldn't sych at all by AS4, everytime it tried to connect, i said looking for changes and then a protection fault, so I downgraded to wm2003se and active sych couldnt connect, I reinstalled AS 3.7 and then 3.8, but it can not run at all it just starts connecting, then stops and I can not show Activesynch window, it can not even explore the device
does anybody have a solution for this, or do I have to format and reinstall windows
yo medman
personally i think it was a bad mistake to upgrade to W2005. cause its still in the development phase and u wont find a lot of help from us users cause most of us are still waiting for a stable version to come out
looking at u'r situation
hard reset u'r PPC, do not connect u'r USB.....now install 3.8 MSYNC....... restrt u'r computer.....n then once rebooted......connect the USB cradle with u'r comp and put in u'r PPC...
it shld work now..
best of luck
sync problem...solved!
hey medman,
i don't see why every one is dissing wm2005, its a great rom!
but for the people who are having problems with connecting their device with wm2005 to ActiveSync 4.0 i figured out what is wrong:
if you connected your device to your computer before you installed the new
ActiveSync, it set your device with no driver, and even if you have the
ActiveSync driver now you computer allready recognised your device, so:
the solution is to delete the device setting under device manager of your
computer [start->control panel->system->hardware->device manager]
now with device manager open and with you ppc not connected:
go to the view tab and check "show hidden devices"
then look for the driver of the ppc most likely under the "Non-Plug and Play
Drivers" but if it is not there look around for the driver
when you find it, you went to delete it by right-clicking on the driver and
clicking uninstall
after you delete the old driver have ActiveSync running and place your ppc in the cradle, and the new driver should be installed by ActiveSync 4.0
if you need activesync 4.0 just tell me and i can give you my sight that i uploded as4.0 and wm2005 in a rar file, by the way...most answers are being found on this topic http://forum.xda-developers.com/viewtopic.php?t=18584&postdays=0&postorder=asc&start=0
re:
To rooschool: I did what u suggested but same...
To Destroyer7337:
I didn't connect the ppc before the active sych, I raid this topic before I tried wm2005, I took all the precautions u mentioned, but to no avail, any way I downgraded to 2003se bu I cannot synch with all versions of activesynch
Driver?
What is the name of the driver? I can't find anything in non plug and play and I'm not sure what I'm looking for.
Ryan
i let my almost-future son-in-law take home and play with my g4 wizard love wm6 cingular branded wizard.
he mailed it back to me and now it won't connect to activesync 4.5.
if i uncheck advanced settings on the usb settings page, the computer gives me the usb balloons that says it is connected to the computer.
activesync doesn't even want to look for the pda.
if i check the box, activesync tries to find the pda but fails.
also, the computer doesn't seem to connect to the computer since there are no usb balloons.
is there anything i can try short of reinstalling wizard love.
thanks
Plug it into the usb wire, turn it on and then do a hard reset do not unplug it till active sync pops up on your computer.
irv6744 said:
i let my almost-future son-in-law take home and play with my g4 wizard love wm6 cingular branded wizard.
he mailed it back to me and now it won't connect to activesync 4.5.
if i uncheck advanced settings on the usb settings page, the computer gives me the usb balloons that says it is connected to the computer.
activesync doesn't even want to look for the pda.
if i check the box, activesync tries to find the pda but fails.
also, the computer doesn't seem to connect to the computer since there are no usb balloons.
is there anything i can try short of reinstalling wizard love.
thanks
Click to expand...
Click to collapse
You havent mentioned what OS you have on your pc. If you have XP SP2 you can sometimes jumpstart activesync 4.5 by restarting the DHCP.
Start -> Control Panel -> Administrative Tools (only visible in classic view of control panel) -> Services -> DHCP client -> Restart
peter petrelli said:
You havent mentioned what OS you have on your pc. If you have XP SP2 you can sometimes jumpstart activesync 4.5 by restarting the DHCP.
Start -> Control Panel -> Administrative Tools (only visible in classic view of control panel) -> Services -> DHCP client -> Restart
Click to expand...
Click to collapse
i've got the same problem olso with xp sp2 and i tried it on vista .
after the update to wm6 its ****ty both solution didn't work for me.
I hope some one get a solution
thanxxx
Same problem with me too..
all the sudden the activesync service in WM6 doesnt start at all..
ActiveSync on PC warns me there is a problem with the connection..
Is there anybody out there that knows how to get the ActiveSync service back and running again.? I tried the the taskmanager to look for the service itself. But found out that the activeSync service is nowhere to be found between the other services. 16 other services are found.
I tired it on Vista (Mobile 6.1) and Windows XP SP2 (Activesync 4.5)
It does not help when i start the program ActciveSync (application) in WM6.
dCY said:
Same problem with me too..
all the sudden the activesync service in WM6 doesnt start at all..
ActiveSync on PC warns me there is a problem with the connection..
Is there anybody out there that knows how to get the ActiveSync service back and running again.? I tried the the taskmanager to look for the service itself. But found out that the activeSync service is nowhere to be found between the other services. 16 other services are found.
I tired it on Vista (Mobile 6.1) and Windows XP SP2 (Activesync 4.5)
It does not help when i start the program ActciveSync (application) in WM6.
Click to expand...
Click to collapse
I had the same problem one time after flashing to WM6. How I got it to work was to delete the old mobile device from my active sync, then connect the usb cable.
i've tried all the hints here but so far no connectivity to activesync.
did anyone get the pda seen by winxpsp2 any other way that worked.
i can get into boot loader but still no connection ro activesync.
thanks
Hi
in the begining , sorry for my poor langague
first point u should have active synchronize virgin 4.5 not earlier
second point delete the old connection from the programe.then make a new connection between ur device & pc. it will work properly (in shaa allah)
try it & let me know
zizo
shalom
i uninstalled activesync and then rebooted, downloaded a new copy and reinstalled it.
the computer sees the pda through the rndis driver and says it's installed.
at the end of the install i got some kind of message about outlook not being the default email reader but i ignored it.
then i ran the basic outlook setup but did not make outlook the default mail client.
but active sync still refuses to connect to the computer to the pda.
any other thoughts.
later tonight or during the week i will try it on another xp computer and then a vista computer to see if one of them works.
Hey lissen folks.... any luck on finding the solution.... were u guys able to run the AS4.5 after removing the device? If yes, how do you remove the devioce?
I know its a problem with PC because i tried it on other PC with Win2000 and it worked fine. ANything to do with firewall perhaps?
Hello people,
As everyone knows, there are people who cant connect the new Roms with ActiveSync, for those who cant, we will post here the rigth ones.
Let´s go guys, let's do some work for us... and encourage the people to cook for us too!
The Roms tested:
BD's v5 (Blackdragon) - Thanks mkoch5 for test it.
Best Regards
have u tried this?
1. Keep the WM device connected.
2. Go to Start > Start Search.
3. Enter Device Manager or devmgmt.msc to launch the Device Manager window.
4. Look under the Network adapters node for Microsoft Windows Mobile Remote Adapter. If this is not present, skip to step 5. Otherwise, right-click Microsoft Windows Mobile Remote Adapter and choose to Uninstall.
5. Look under the Mobile Devices node for Microsoft USB Sync. If this is not present, skip to step 6. Otherwise, right-click Microsoft USB Sync and choose to Uninstall.
6. Disconnect and reconnect the WM device. The device driver for the PPC Phone will re-install and Windows Mobile Device Center will launch.
exakt said:
have u tried this?
1. Keep the WM device connected.
2. Go to Start > Start Search.
3. Enter Device Manager or devmgmt.msc to launch the Device Manager window.
4. Look under the Network adapters node for Microsoft Windows Mobile Remote Adapter. If this is not present, skip to step 5. Otherwise, right-click Microsoft Windows Mobile Remote Adapter and choose to Uninstall.
5. Look under the Mobile Devices node for Microsoft USB Sync. If this is not present, skip to step 6. Otherwise, right-click Microsoft USB Sync and choose to Uninstall.
6. Disconnect and reconnect the WM device. The device driver for the PPC Phone will re-install and Windows Mobile Device Center will launch.
Click to expand...
Click to collapse
I´m using the activesync 4.5 in windows XP. I can connect the Niki while i´m using older ROMs, but newest, i cant.
regards
can´t help but same with my Niki100
Michael
Please Guys, can anyone cook some ROMS with the old active sync function for those who can´t connect with computer?
Best Reagards
I tried the same ROM on a NIKI200 (the other one is a NIKI100) and Active Sync works perfectly
Someone knows where the difference is between 100 and 200 ?
I have same problem on my XDA Star too. On newer rom (Phoenix and latest Lilly) can not connect with activesync
hmmmmmm flashed the NIKI100 again ...and now it works with Activesync
and also in FAST Mode
Don´t know why ... but it works
Michael
Awsome!
What ROM do you used?
regards
I used BD´s V5 .... and it works ...nearly perfect
Michael
Anyone tested the New LILLY ROM v1.4.5 (Build 20757.1.4.0)?
Has anyone sollution about this problem????
Hy to all!
I got a problem with activsync on my hero.I install activsync from my memory card , but i can't sycronise my phone, then i download the one from the web site and no succes. On my computer is comming out some message like wmisrsc.exe-no disk- there is no disk in the drive. Then i got the 3 option cancel, try again, and continue. I have been trying to go on application settings , development and to unmark usb debugging. Still the same...If i run the program activsync none of the icon is available. Is it wrong someting with my coputer? ( I use windows XP) . Thank you in advance
Soft Reset Required
Hi Carmen,
I had this problem too, I found that I had killed the task 'PC Sync' using a taskkiller... this cannot restart itselt without rebooting the device.
I don't know if this is exactly the problem you're having, but it is what I found with mine.
Give it a try... reboot your Hero and remember to not kill the task called 'PC Syncronisation'
Regards,
Dan
Am I missing something here? You are talking about Microsoft's activesync? It aint gonna work.
No is the one for android! Any sugesstions?
You mean HTC sync? In that case sorry no suggestions as mine works fine.