i have an o2 xda 2 that hang on power up at O2 screen then stuck there
i had tested sw reset and even hardware reset but same
i had flashing the rom also but still same
any bro out there who might be able to help me pls
Are you also getting GSM error?
not only gsm bro, with or without sim also when power on stuck on O2 screen
You could try flashing a new rom using sd card method then address any other issues once you get a working pda. One other thing is try removing battery overnight.
I have same issue. Even I have unplug the battery overnight. It is same. I try to download the offical ROM from seeO2 website and upgrade the ROM. (It can upgrade via service mode only.) But it get a error 114 when the upgrade in Radio ROM. After that the screen is same at O2 starting screen and hang (can't off the device).
Please give me help and advice.
Rambo
I only see the OS ROM version (1.60.00WWE) when the device startup and display "No GSM".
Please help!
Related
Please any one come across Error 101:Connection Error in HimaUpgradeUt.exe ? I was using Tmobile 1.72 beta and trying to upgrade to imate 1.72 Official, the upgrade program started, and hang at 40%, forced to reset, and my O2 hang at O2 Splash screen.
I tried hard-reset, and still hang at O2 Splash screen, and when I try to reinstall/upgrade/download, the upgrade program prompt me this error 101:connection error, any one have this before.
Please help, thanks
Reset your device into bootloader (arrow any direction + power + soft reset)
Disable any firewall you may have on your PC (I have had problems with ZoneAlarm)
Restart the upgrade program
I had a problem with Zone Alarm as well. I didn't need to hard reset, though.
Hi guys, thanks for your speedy reply. My friend do not have the patience to wait, so have send to service centre in Singapore and they have help him to solved the problems and with O2 1.66 ROM (FOC)
Thanks guys, you are great, and great forum
Hi all, first of all I am no geek, I would like to unlock my HTC TYTN so that I may use other sims while abroad etc. I have read the instructions, downloaded v£a of the Sim Cid unlocker, however every time I run the unlocker my phone shuts down and reboots. I have tried with the phone without sim with none network sim with Orange sim same result phone shutys down and reboots. I have tried waiting till it is connected via active sync after rebooting but it nust keeps rebooting. I have even manually loaded the hard spl and run it on the phone but my phone shuts reboots and the spl has not been updated. Can anyone tell me what I am doing wrong?.
Thanks in advance Jimmy
info on device status tytn on orange
I have kept trying but still the phone keeps rebooting everytime I try to unlock. Device status uis as follows
operator version 24.181.1.612
ROM version 1.81.61.2 WWE
ROM Date 09/20/07
Radio version 1.27.12.29
Protocol version 22.45.88.07W
does any of this indicate I would have a problem using current unlock version 3a?.
Thanks in advance Jimmy
Check to see if the SPL has changed... Go to bootloader - hold power, OK above flywheel and reset with stylus. hold until tri-colour screen comes up. It will tell you your IPL and SPL.
It may already have flashed and that means you can update your rom with more safety.
Do you get any errors when running the pc? For instance [error 260](pretty common).
If that error keeps coming up you need to COMPLETELY remove activesync and then reload. All sync relationships MUST be deleted too. That fixed mine
Cheers...
Hello to everyone. I am newb here. I need a great men to help fix my phone. I got a Cingular 8125 G4 CID-locked but sim-unlocked device. Prior to upgrading, it finely works in a Cingular Official ROM and WM5. Now I decide to put some more interesting rom - a AKU 2.3 rom (if i am not mistaken this is a Wizard Love Rom). It was upgraded successfully. Then I flashed another rom which I am not familiar with the content. Unfortunately didn't go right this time. Now I am stuck with RGB screen. I even use shelltool in RGB screen (even knowing not to work in this kind of mode). In the middle of the process, the device turns off and shelltool hang, never show progress. I pull out the usb cable from the device. Then when I turn on the unit it gives me the RGB screen showing IPL/SPL 2.25.0001 with no splash screen, OS and GSM. I tried flashing different rom which I know is safe for G4 CID-locked device but no luck at all. I can get through 96% and the device turns off automatically and return to blinking RGB screen with on and off usb connection. Did I bricked my device? Please help revive my Wizard 100. Thank you in advance.
Nopes ! your phone is not bricked,as long as it gets into Bootloaders (RGB screen) its safe.
Download official cingular stock rom and flash in Bootloaders to recover or flash wizard_love rom.After recovering,don't use shelltool,its risky and old method,now a much better method is available.Either upgrade through 'SoftSPL or HardSPL'.
Thanks for the reply I appreciate it. I did all that, download the cingular official rom from the link I got from xda forum and wizard love rom and flashed it but no luck at all. It gives me the same problem. When doing the upgrading the phone restart at 96% and reboot itself showing different error every upgrading attempt. What I only got in bootloader screen is the IPL/SPL 2.25.0001 no OS and GSM (Radio Rom). Maybe I got a corrupted file in my phone. Or just my battery. I tried wall charging but no good. Should I buy a new one or try my luck again. BTW, the error message appeared during upgrading are 274, 302 and 260. The first two seems to be serious matter. Please help me.
Probably,the battery is the culprit here,if its not fully charged or not having enough juice,it won't complete the flash,there are many comm errors due to weak battery,try to get it charged and then try.
How many hours just to have a fully charge battery using wallcharging?
Or maybe my battery needs to be replace. FYI it's 1 yr and 8 mos old now.
My Wizard was revived this time. The problem was the dead battery. I bought a new one and everthing goes fine when I flash the Official Cingualr Rom. Thanks to zabardast_1 and the gurus here in the forum.
Thanz !
It was pleasure to help you,glade you got it up and running
Hey guys,
Recently i have had some problems with my touch dual so I decided to downgrade to a previous official firmware. I had the newest official WWE firmware on it previously.
The ROM installation was successful, everything went good...but now everytime I turn on my phone it never gets past the "please align ur screen" section. My phone is responding to all the screen taps perfectly, but everytime i finish the final tap (on the top right hand side of screen) it always goes back to the middle cross. I can never get past the "screen align" section!!!
Please help !!
thanks
JAMinGUY said:
Recently i have had some problems with my touch dual so I decided to downgrade
Click to expand...
Click to collapse
What sort of problems? Hardware issues before flashing? Which version did you flash from and to.
it always goes back to the middle cross. I can never get past the "screen align" section!!!
Click to expand...
Click to collapse
Try reflashing the ROM or even WM6.1 Official:
http://www.4shared.com/file/8884562...2094051_Radio_NikeMR_1652825_signed_Ship.html
This is from US, and will update the SPL, radio, and ROM. Make sure the phone is provider unlocked (is not locked to one particular phone company) before doing so.
EDIT: My bad. I need to learn to read.
my previous ROM was: RUU_Nike_HTC_ASIA_WWE_2.12.707.2_Radio_NikeMR_1.65.29.22_signed_Ship
I flashed it to: RUU_Nike_HTCASIA_AUS_1.31.710.12_Radio_Nike_1.58.21.23_signed_Ship
after the flash, it now will not get past the "align screen" page everytime I turn on the phone, although it DOES respond to the screen taps.
I can connect it to the computer to problems, it still connects to activesync so i can still flash it to various OFFICAL ROMS.
rling said:
What sort of problems? Hardware issues before flashing? Which version did you flash from and to.
Try reflashing the ROM or even WM6.1 Official:
http://www.4shared.com/file/8884562...2094051_Radio_NikeMR_1652825_signed_Ship.html
This is from US, and will update the SPL, radio, and ROM. Make sure the phone is provider unlocked (is not locked to one particular phone company) before doing so.
Click to expand...
Click to collapse
Rling, I see you are from AUst too? me too....
The hardware issue I had while using the 6.1 ROM was that my screen taps on different icons would not work, instead everytime i tapped the screen, it would goto my contacts.
I am now trying to download the link U posted and see how that works .
thanks
Hey I tryed flashing it to WM6.1 Official ROM:
http://www.4shared.com/file/88845629...gned_Ship.html
but it said invalid vendor ID and wouldn't flash...........my niki100 is still stuck in the "screen align" screen.....responds to screen taps....but doesn't go past the screen align section!!!!!!!!
any ideas anyone??????? help!!!!!!!!!!
anyone have this problem with their touch dual's before?????????????
JAMinGUY said:
Hey I tryed flashing it to WM6.1 Official ROM:
http://www.4shared.com/file/88845629...gned_Ship.html
but it said invalid vendor ID and wouldn't flash...........my niki100 is still stuck in the "screen align" screen.....responds to screen taps....but doesn't go past the screen align section!!!!!!!!
any ideas anyone??????? help!!!!!!!!!!
Click to expand...
Click to collapse
Invalid vendor ID would pop up if you have a phone other than Nike. Sure it is not a neon? The info would be printed in the battery compartment.
yeah in the battery compartment it says NIKI100
i am 100 % sure its not a NEON
If it's a NIKI100, then the only other time it would give the error if the phone is locked to a phone company. You'll need to CID unlock the phone first.
Nah its not locked to any phone company, I can use telstra, optus and 3 sims in it no problems...
I have success in updating or downgrading it to various ROMS...but it always loops the "screen align" section on the various ROMS.............
JAMinGUY said:
Nah its not locked to any phone company, I can use telstra, optus and 3 sims in it no problems...
I have success in updating or downgrading it to various ROMS...but it always loops the "screen align" section on the various ROMS.............
Click to expand...
Click to collapse
Phone not locked - Checked.
Radio - Higher than 1.65 - Check on boot screen (the red letters on right)
ROMS - Official and custom.
If the screen alignment loops despite all the above, then it could be a hardware problem.
I remember my brother's mda vario. There was a error with the touchdisplay, so it stuck at the screen align screen.
Maybe this is your error.
Put the orginal rom and orginal spl on it and send the device to your vendor.
Today a employee of UPC picked up my phone for a reparation at HTC.
I've enclosed a letter with my complains so I hope that they will repair it without any costs. Let's hope for a solution. As soon as I know something I'll let you guys know.
me too having the same problem tried even changeing touch pad
any solutions pls
regards
riaz
My O2 Atom Life got a problem "automatically turn off it self when low battery" and if I try to turn on , it will shut down again while booting Windows ( Windows - Splash Screen )
By this case , people say it was cause of Battery and need to change a new battery to solve the problem.
So, I brought a new battery , but the problem still left ...
later I once had changed my SIM CARD to my other mobile . After , I tried to turn on my O2 atom life and it was turn on "completely" without shutting down while booting Windows. Also the "automatically turn off it self when low battery" is not occur when I am not insert SIM CARD
So , in conclude , No any problem occur when I'm not insert SIM CARD
Would anyone please tell me What the cause of this? ... Hardware of Software or how can I fix it?
- Thank you very much for every answer -
ALICEACADEMY said:
My O2 Atom Life got a problem "automatically turn off it self when low battery" and if I try to turn on , it will shut down again while booting Windows ( Windows - Splash Screen )
By this case , people say it was cause of Battery and need to change a new battery to solve the problem.
So, I brought a new battery , but the problem still left ...
later I once had changed my SIM CARD to my other mobile . After , I tried to turn on my O2 atom life and it was turn on "completely" without shutting down while booting Windows. Also the "automatically turn off it self when low battery" is not occur when I am not insert SIM CARD
So , in conclude , No any problem occur when I'm not insert SIM CARD
Would anyone please tell me What the cause of this? ... Hardware of Software or how can I fix it?
- Thank you very much for every answer -
Click to expand...
Click to collapse
You mean the problem was fixed when you inserted a different SIM card?...that's strange...have you tried reflashing your phone and tried using the same "bad" SIM?
juliuscezar said:
You mean the problem was fixed when you inserted a different SIM card?...that's strange...have you tried reflashing your phone and tried using the same "bad" SIM?
Click to expand...
Click to collapse
Thank you for your attention . Actually , I mean "NO SIM CARD" or "TURN OFF PHONE MODE"
ALICEACADEMY said:
Thank you for your attention . Actually , I mean "NO SIM CARD" or "TURN OFF PHONE MODE"
Click to expand...
Click to collapse
I guess you got to have it checked to a qualified technician.
No reset below 70% energy
I have the same problem. Thanks to your discovery i am sure that it is a bug in the radio firmware. Seems that there are different radios ,because not all users of this device have that problem. For me, if i have to do a reset, for installing software or so, i switch the device into flight mode, and then i can do a reset even at 20% of energy !!! If the device hangs for some reason, try to reach the Comm-manager through the hardware-button "Start-Menu" to switch the phone off. If that doesn´t work, remove the SIM-card, restart your device, switch to flight mode (works without SIM-card inside) and then insert the card again. This last solution is not very comfortable, but in case of emergency it is rather useful.
My radio-firmware-number is AL1_KLNC2340_080121_RS001
Hopefully someone will write a new radio firmware without that lousy bug and tell us how to update our beloved AL.
Greetings from Germany
Hubie53
hubie53 said:
I have the same problem. Thanks to your discovery i am sure that it is a bug in the radio firmware. Seems that there are different radios ,because not all users of this device have that problem. For me, if i have to do a reset, for installing software or so, i switch the device into flight mode, and then i can do a reset even at 20% of energy !!! If the device hangs for some reason, try to reach the Comm-manager through the hardware-button "Start-Menu" to switch the phone off. If that doesn´t work, remove the SIM-card, restart your device, switch to flight mode (works without SIM-card inside) and then insert the card again. This last solution is not very comfortable, but in case of emergency it is rather useful.
My radio-firmware-number is AL1_KLNC2340_080121_RS001
Hopefully someone will write a new radio firmware without that lousy bug and tell us how to update our beloved AL.
Greetings from Germany
Hubie53
Click to expand...
Click to collapse
If the problem is radio firmware you may have to flash your AL with an official ROM at O2 site. Have your AL flashed, so that you can also flash it with WM6.5. in case you want it.
juliuscezar said:
If the problem is radio firmware you may have to flash your AL with an official ROM at O2 site. Have your AL flashed, so that you can also flash it with WM6.5. in case you want it.
Click to expand...
Click to collapse
I guess Atom Life is an extremely poorly built phone.
The reason of rebooting is the phone drawing too much power and it shuts down.
Without sim card, the 3G / mobile function will certainly draw up lots of power.
Atom Life poorly built
mcdull said:
I guess Atom Life is an extremely poorly built phone.
The reason of rebooting is the phone drawing too much power and it shuts down.
Without sim card, the 3G / mobile function will certainly draw up lots of power.
Click to expand...
Click to collapse
Maybe the phone function draws a lot of energy. But after rebooting the battery has lost around 2 or 3% of energy. I think this is normal and not booting below 70% must have other reasons, for example wrong recognition of the battery status, and that must be (i think so) a false parameter in the radio firmware (or in the startup sequence of the ROM?).
hubie53
due to the bad battery and freezing of the phone, I have given up the atom life and get myself a touch HD. I do know that some of the revision of atom life would be better..
same problem here
but with atom exec
please i get tired from this ppc
hi,all
Greeting,
i have same problem even already replace the battery with the new one,
is it radio version problem..?
my radio is : AL1_KLNC2340_070905_RS001
OS is AtomLife WM 6.5 builds 28233 • 23569 • 23115 • 21905 • 21754 WWE of bajok
can anyone advise me regarding these matter,or should i change the radio version into AL1_KLNC2340_080121_RS001 as per Juliuscaesar says..?
tks all,
might be helpfull of your kindly advise
Warm Regards
Rama for atom life indonesia
ramaramsati said:
hi,all
Greeting,
i have same problem even already replace the battery with the new one,
is it radio version problem..?
my radio is : AL1_KLNC2340_070905_RS001
OS is AtomLife WM 6.5 builds 28233 • 23569 • 23115 • 21905 • 21754 WWE of bajok
can anyone advise me regarding these matter,or should i change the radio version into AL1_KLNC2340_080121_RS001 as per Juliuscaesar says..?
tks all,
might be helpfull of your kindly advise
Warm Regards
Rama for atom life indonesia
Click to expand...
Click to collapse
You should've upgraded your device's radio into AL1_KLNC2340_080121_RS001 before flashing, mate.
i did hardreset for my atom life, or maybe change your battery with the new one and than do hardreset...good luck...
regards.