Related
First off, after realising that i needed to unlock my SX56 and ATT/Cingular/Siemens weren't going to help, I ran across the forum. Had a new ROM cooked and running in almost no time at all! Thanks to everyone!
Here's my question: I'm running a slighly modified "A.30.09 ENG Siemens" ROM on a Siemens SX56 (Wallaby). I downloaded PhonExt 1.2 and copied the file to my XDA, but I can't get it to install. I've searched a lot, and read a lot of posts, but I guess Im missing something. I just get a "SetupPhoneExt_PPC2002 is not a valid Pocket PC Application" error message. (I tried running it on my desktop as well, just to make sure I didn't need to that and copy it over...")
Any help would be appreciated.
kylechenier.at.hotmail.com
Try this...
Make sure the .exe file or a shortcut to the .exe file is in your Startup folder on your SX56: My Device\Windows\StartUp\PhoneExt.exe.
After placing this file in your StartUp folder, soft reset, the program will load.
You should see an icon in your system tray when the program is active.
can't even get phonext.exe
I can't get phonext.exe. The file i downloaded from the phonext website is the SetupPhoneExt_PPC2002.exe, which i can't run. Do I need anything other than just the "phonext.exe" file itself? Can I just copy the phonext.exe file from someone, or do I need to run the setup?
am running wm2003 - does that matter?
I'm running wm2003 -- does that make a difference?
You will need to run that setup file from your desktop. I have a copy of SetupPhoneExt_PPC2002.exe that I just ran from my desktop with no problems at all. It is strange that you cannot run the setup file from your desktop. Are you getting an error message or will the file just not run?
I am running Windows 2000 on my desktop. My SX56 is running WM2003 with A.30.09 ENG ROM, and Activesync 3.8.
I am not sure just copying the PhonExt.exe file from my SX56 and emailing to you would work, but I can if you would like.
It worked!
I don't know what was different when I ran it this time, but whatever it was seemed to have worked.
Thanks llwhipll!
Been trying everything on the Internet and managed to make some headway with Monet (Virgin Lobster 700tv) unlock (this might work for Meteor/C700 as well).
1. Firstly you need to get rid of the 'registry security policy' lock.
Download cert install sp.zip:
[see attachment]
a. copy "SP_AllowCertificateInstall.cab" to the root of Monet memory or card
b. Use file explorer on monet to navigate to file. Click to run. Should run ok.
c. Unzip "SDA_ApplicationUnlock.zip" on PC and run "SDA_ApplicationUnlock.exe" whilst Monet is connected via activesync
2. Copy registry editor onto Monet. I used PHM, but others should work. Note install PHM loader on PC whilst monet is connected via activesync. It might install correctly on Monet, it might not. This does not matter. Just navigate on your PC to Program Files\phm and find the .exe file and copy to root of Monet memory or card.
Also nice free remote registry editor here (works from PC whilst phone is connected via activesync):
http://www.breaksoft.com/Blog/Utilities/2005/1/Mobile_Registry_Editor.aspx
Excellent 'free' combined file explorer and registry editor (perhaps for later - after app. unlock) SGS:
http://www.handango.com/PlatformPro...925777&Ntt=registry&productId=195244&R=195244
3. Using phm (or the registry app you like) change the four keys specified in this guide (you might find the above process has already reset 1001 and 101b:
http://wiki.spv-developers.com/HTC_Application_Unlock_Guide
They are:
Under HKEY_LOCAL_MACHINE\Security\Policies\Policies:
a. Change the DWORD named "1001" to 1 (could originally be 2)
b. Change the DWORD named "1005" to 40 (could originally be 16)
c. HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128 or 16 (before) 144 (after)
d. HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 101b = 1 (this key might not exist, if so, create it).
4. Restart
5. HOORAY. Now your phone is fully application unlocked.
-----the following procedure is to SIM Unlock, this currently does not work. Possibly spv-services will be updated at some time to work with the Monet---->
6. Now download spv_services:
http://www.spv-developers.com/forum/showthread.php?t=236
a. copy the cert.cab file to you Monet. Select and run using File explorer. it should run fine.
b. Next step. Run SPV_services from PC whilst phone still connected via Activesync. Should unlock ..... however I get checksum error....
Will investigate. Anyone have any luck please say. At least we can now get the phone app.unlocked.
------------------------->
Note: I have read that the phone might again become app.locked if you do a hard reset. If this is the case, just follow the above again.
rgds
colonel said:
(...)
b. Next step. Run SPV_services from PC whilst phone still connected via Activesync. Should unlock ..... however I get checksum error....
(...)
Click to expand...
Click to collapse
So this thread should not be named Full unlock for HTC Monet :>
apparently wen i tell spv services to use simlock tool. it freezes at a blue screen trying to load a php.. this is after i input AGREE into the box..
it opens fine b4 that.. am i doing anything wrong?
bongmaster said:
apparently wen i tell spv services to use simlock tool. it freezes at a blue screen trying to load a php.. this is after i input AGREE into the box..
it opens fine b4 that.. am i doing anything wrong?
Click to expand...
Click to collapse
SPV-Services needs to access the internet.
A php is an active type of web page.
It would appear that there is something blocking it from access the internet. Most probably a firewall on your PC, either the internal windows one, or a 3rd party package you have installed. You need to check this.
If its for the Monet I wouldn't bother anyhow as SPV-Services can not currently SIMunlock this phone.
rgds
colonel said:
SPV-Services needs to access the internet.
A php is an active type of web page.
It would appear that there is something blocking it from access the internet. Most probably a firewall on your PC, either the internal windows one, or a 3rd party package you have installed. You need to check this.
If its for the Monet I wouldn't bother anyhow as SPV-Services can not currently SIMunlock this phone.
rgds
Click to expand...
Click to collapse
1st thing i checked was the firewall..
i know wat a php is i run a phpbb forum and yea it is a Monet (lobster 700)..
shame ( i really need to unlock the networks on it ) i have an O2 sim and wen i put it in it askes for a network unlock code.. if only i had that code.. any idea how to obtain it?
the only way currently is to use virgin or a commercial service
If you put at least £30 of talk time on your virgin account, they will send you the unlock code for free.
Otherwise search google or this forum for a commercial unlocking service.
rgds
colonel said:
1. Firstly you need to get rid of the 'registry security policy' lock.
Download cert install sp.zip:
http://www.spv-developers.com/forum/showthread.php?t=425
Click to expand...
Click to collapse
Hi, I have a question. I would like to try it but the link above shows: Invalid Thread specified. If you followed a valid link, please notify the administrator :-(
burticek said:
Hi, I have a question. I would like to try it but the link above shows: Invalid Thread specified. If you followed a valid link, please notify the administrator :-(
Click to expand...
Click to collapse
Edit: Never mind. I have found it ;-)
Virgin Lobster
I have followed all the instructions
I get an error when running the sim lock to as follows:
Encrypted checksum not found
I then use a vodafone sime and get Network is locked. PLease input unlock code.
Any ideas?
SteveW
classicxda said:
I have followed all the instructions
I get an error when running the sim lock to as follows:
Encrypted checksum not found
I then use a vodafone sime and get Network is locked. PLease input unlock code.
Any ideas?
SteveW
Click to expand...
Click to collapse
simunlock is not working yet on the monet.
this procedure only app. unlocks
rgds
c.
Lobster unlock
What would it cost to do this?
Cheers
SteveW
just phone virgin if yu have a lobster. they require £30 of airtime to be purchased before they give you the code
Application Unlock for HTC Monet
Hi colonel
I have been trying in vain to do an application unlock on my Lobster 700tv. I have managed to install and run the "SP_AllowCertificateInstall.cab" which went ok. The "SDA_ApplicationUnlock.exe" also ran ok. However, running PHM required a copy to be placed on the Monet which I did. Attempting to run the "setup.exe", gave the following message:
"ALERT: Setup is Not a Valid Windows CE Application"
Because of this, I attempted to change the registry keys using "Mobile Registry Editor.exe" which seemed to do the job. However, applications still wont work (I'm trying to install TomTom Navigator 6).
I have since managed to load and run "MobileRegistryEditor.exe" on my phone without problems but I still cannot get TomTom Navigator 6 to run, although it loads onto the storage card ok.
Please can you help?
Regards,
leadweight
leadweight said:
Hi colonel
I have been trying in vain to do an application unlock on my Lobster 700tv. I have managed to install and run the "SP_AllowCertificateInstall.cab" which went ok. The "SDA_ApplicationUnlock.exe" also ran ok. However, running PHM required a copy to be placed on the Monet which I did. Attempting to run the "setup.exe", gave the following message:
"ALERT: Setup is Not a Valid Windows CE Application"
Because of this, I attempted to change the registry keys using "Mobile Registry Editor.exe" which seemed to do the job. However, applications still wont work (I'm trying to install TomTom Navigator 6).
I have since managed to load and run "MobileRegistryEditor.exe" on my phone without problems but I still cannot get TomTom Navigator 6 to run, although it loads onto the storage card ok.
Please can you help?
Regards,
leadweight
Click to expand...
Click to collapse
I also have been trying to unlock my Lobby to no avail.
Used a couple of reg editors but when u change the values the phone comes back "Unable to perform this operation".
I also used the HTC unlocker which came back with the same message.
Lobster headache
Hi bocsta
I had problems to start with but I had failed to read colonel's instructions correctly. I couldn't get PHM to run on my phone so I tried some of colonel's other suggestions. I found that "SGS Explorer" did load ok and I used its registry editor to change the registry keys as listed. I am assuming that my phone is now unlocked but TomTom Navigator 6 will not run.
Can someone please help before I throw my lobster back in the sea?
Regads .....
leadweight said:
Hi bocsta
I had problems to start with but I had failed to read colonel's instructions correctly. I couldn't get PHM to run on my phone so I tried some of colonel's other suggestions. I found that "SGS Explorer" did load ok and I used its registry editor to change the registry keys as listed. I am assuming that my phone is now unlocked but TomTom Navigator 6 will not run.
Can someone please help before I throw my lobster back in the sea?
Regads .....
Click to expand...
Click to collapse
Colonels zip file comes nack as not a valid archive ?
Where can I find the first file in his list being : SP_AllowCertificateInstall.cab ???
Find File
bocsta said:
Colonels zip file comes nack as not a valid archive ?
Where can I find the first file in his list being : SP_AllowCertificateInstall.cab ???
Click to expand...
Click to collapse
The file you require is "cert install sp.zip"
You can get it by clicking on colonels attached files link on the bottom left of his list.
Regards
leadweight said:
The file you require is "cert install sp.zip"
You can get it by clicking on colonels attached files link on the bottom left of his list.
Regards
Click to expand...
Click to collapse
Have you tried downloading it recently The zip file says it is not a valid archive or is damaged ?
bocsta said:
Have you tried downloading it recently The zip file says it is not a valid archive or is damaged ?
Click to expand...
Click to collapse
I have just tried it again and it downloaded ok. I'm not sure why you have had problems - keep trying as it could be just a glitch.
Regards ...
leadweight said:
I have just tried it again and it downloaded ok. I'm not sure why you have had problems - keep trying as it could be just a glitch.
Regards ...
Click to expand...
Click to collapse
Yes it dowmloads OK. I just cant unzip it. Can you try to unzip it please ?
If it fails and you still have the Zip file that you unzipped originally cann you please PM it to me ?
Thanks
The file "xx" cannot be opened. Either it is not signed with a trusted certificate...
I keep getting this error whenever I try to open a couple applications, like Navizon, HTC Home Customizer, MS Live Search, and a lot more (but googlemaps and a few work just fine). Anyways I flashed to a DCD 3.0.1 rom I cooked... I added a few apps from the titan kitchen by copying the OEM folders into the DCD OEM folder and it all went pretty fine....
has anyone ever encountered these errors? I think I'm gonna have to cook a clean rom with just the basics and have to install everything one by one again unless someone knows what to do..
I had the exact same problem.
you didn't include the .NET framework in your build.
re-cook with that option selected, and those apps will work.
nickles96 said:
I had the exact same problem.
you didn't include the .NET framework in your build.
re-cook with that option selected, and those apps will work.
Click to expand...
Click to collapse
im using dcd 3.0.1 kitchen, i dont even see it listed as an option and i thought it was already built in anyway
Did this ever get resolved? I am having the same issue with Garmin and I know I have .net installed
if you are installing to a memory card, try installing to main memory... that worked for me with MusicID
Bump having this issue helpplease
trying to install or try some different Radio cabs I keep getting this error few other programs as well fairly new so I am pretty confused. oh this is is on My Kaiser Tilt though was hoping not to have to start a whole new thread.
getting the same error message
i keep getting the following error message
"The file 'xx' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
every time i do a soft reset all my installed programs get like this, and i have to reinstall them for them to work. This only happens to the applications i've installed on my own, not the ones that come with the phone.
if there is anyone out there who has a solution, please let me know.
File Explorer error on MDA Vario 2
Hello ppl
i uninstalled a game & a worldmate live program from my windows mobile in the morning.. from the very next moment i'm unable to browse through my file explorer
i click
start>file explorer
i get the following error
"The file 'Start' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
help pls..... on this issue..
regards
Prasad
SOLUTION!!!
Most of the cases this is not a CERTIFICATE problem-
if you go to your file explorer and look for the PROGRAM FILES directory you will be surprise -
actually this happens when you install cabs on the storage card - those apps write temp files all the time - so when you take out your SD card - those apps continue writing this temp files -
in the bottom line = go to your device and rename the FOLDER storage card to storage old -
now you will see the icon for your SD CARD next to the name STORAGE CARD 2-
the last thing is to remove the SD CARD an re insert it again - now you will see that it return to its original name (STORAGE CARD) .
enjoy
Thank you mate, same problem here solved with your help
uZardWebP
I m not able to rename the storage card to storage old pls help and i m getting the same error message with uzard web browser.
http://www.yourmobileblog.com/2010/09/working-solution-for-errors-like-file-cannot-be-opened/
I got the solution here, check out yourself
i tryed everything and nothing seemed to work i got a 8525 im trying to flash a new rom i dont it 10 times or more on a 8125 first i put a new framework on my phone.. first i tryed 2.0 then tryed 3.5 but when i go and run the hard-spl-v7 its just saying "file or assembly name 'system version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089 or one of its dependencies, was not found ten i push quit then says the application failed to load required components if the .net compactframework is installed on a storage card pleaseensure is in place and launch the application again if tis fails a re installation of the net framework is recommended support info -2144783643 (80000005) and if i try to click on a rom all it says is te application failed to initialize properly (0x0000135) click on ok to terminate the application i tryed looking all over te forums and cant find nothing about it so plz help me
If you installed the .net framework to an SD card, re-install it to the Phone. These system files AREN'T to be installed anywhere but main memory...
You also need to install Hard SPL V7 on it too... This gives you a safety net if and when things go wrong with the flash, never gonna be 100% safe but better odds of recovery if Hard SPL V7 is installed...
Cheers...
thanks alot im going to try it out again.... i just wish it was as easy as the ones i done on the 8125 wizard
This is my first post, so apologies if this is in the wrong place or has been asked before (I have searched and found some answers, but none of these worked)
Basically, last night whenever I tried to use an application on my HTC HD2 I was getting the following error message:
"The file xxx cannot be opened. Either it is not signed with a trusted certificate, or one if its components cannot be found. If the problem persists, try reinstalling or restoring this file."
In searching for the solution, a lot of people are saying that I need to edit the reistry. (Specifiaclly HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1)
I have tried downloading the recommended registry editors on the forums (Resco Explorer etc.) but am unable to install because the "program is from an unknown publisher." I click yes to get pass this initial message, like I always have done in the past, and the following is displayed:
Installation was unseccessful. The program or setting cannot be installed beacause it is not digitally signed with a trusted certificate."
I have also tried using a program recommended called CeRegistryEditor and using my PC via ActiveSync to edit the registry, but am getting an error message "Access Denied!".
Does anybody know any other way of editing the registry? Am I actually doing the right thing? Are there any security settings that I need to disable to allow CeReistryEditor to edit the registry?
This is really bugging me, I have only been without my apps for about 12 hours throughout the night but it is hard to live without them!! I REALLY don't want to perform a hard reset and will do anything to avoid this!
When I get this I just remove evertyhing to do with it on the phone and re download it (the cab file usually) and it seems to work.
thanks for your reply. I have tried this but when I try and reinstall I am getting the message: Installation was unseccessful. The program or setting cannot be installed beacause it is not digitally signed with a trusted certificate.
I think that the security settings have been changed, but I cant see how to change them with editing the registry which I am struggling to do
Can I ask what app you are trying to install? Or is it any app?
Multiple Apps that were running OK yesterday, but not today. I think it is all the apps that I have downloaded from Omarket.... Omarket isnt working either!
Hi,
Any luck on this. I m also facing similar issue after installing Android on my HD2.
I have the exact same issue after running Android from SD card. No application (non-stock ones) are working anymore. Like 3rd party certificates are being blocked or something...
For everyone with this problem, download Mobile Registry Editor and connect your phone to your PC via USB, then start the Editor and go to "HKEY_LOCAL_MACHINE\Security\Policies\Policies" and search for the DWord "0000101a" and change the decimal to "1", that will fix your problem. This problem happens to me if I "reboot" while in Android instead of turning the phone completely off and then back on.
Edit: Added link to download.
As a side note, I always did this to mine while running Windows Mobile, then booted Android after fixing the registry.
and when this is not possible
Hi,
i have the same issue after loading android from the sd-card.
But, i am not able to change the reg, access denied, also with ceregistry unlock tool.
So, what can i do?
regards
Nine
Niine said:
Hi,
i have the same issue after loading android from the sd-card.
But, i am not able to change the reg, access denied, also with ceregistry unlock tool.
So, what can i do?
regards
Nine
Click to expand...
Click to collapse
Hi,
I also have the same issue after loading android from the sd-card. I have also re-installed the stock rom and the problem still persists. Im also unable to install any reg editors as keep getting the "not signed with a trusted certificate".
I read that a cooked rom may be a solution around this but I liked the set up I had and wanted to keep my original rom so any other suggestions would be appreciated.
Thanks
Lee
Exactly the same problem.
Non-stock programs not working after failed boot of android from SD card, and I'm unable to change any registry entries either. Practically I'm locked out of my phone, just the basic functions working. Any help would be greatly appreciated!
if forget where I originally found this link (its on xda some place)
http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
but run this first and you no longer get the access denied when using the mobile registry editor , hope it helps.
I have the same problem, just remove the program that was not working, pull out your memory card , then delete the files in the sd card except the application installer, hard reset your phone, and remember to go to SETTINGS-UPDATES&FEEDBACK-ERROR REPORTING-DISABLE ERROR REPORTING, and turn off your phone, put in the memory card and turn your phone on and install the application one by one, the application installed will work as normal, Good Luck, remember to back up your data before hard reset
larrytango said:
if forget where I originally found this link (its on xda some place)
http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
but run this first and you no longer get the access denied when using the mobile registry editor , hope it helps.
Click to expand...
Click to collapse
i tried this methode but unfortunately this message pops up all time:
"phone is not unlockable"