Related
Hello,
I tried to upgrade my imate with bluetooth (instead of cable, because it is in my job)and now the only thing i see in the screen is "Serial v1.02" I have tried to do a full reset but nothing changes. What can i do??? Thanksss
:lol: not buy serial cable!!!
there is an OFFICIAL UPGRADE ready and existing, but not yet PUBLIC,
it is one nice 40 MB RUU file which will uprgade your unit to english language:
Microsoft Pocket PC version 4.20.0 (Build 13252)
ROM version: 1.60.00WWE
ROM date: 12/03/03
Radio version: 1.06.01
Protocol version: 1337.16
ExtROM version: 1.60.06
Indirizzo http://xda-developers.com/incoming/rom160wwe/RUU16006WWE_T-mobile_NL.exe
IT'S FANTASTIC AND EASY WHIT THE USB CRADDLE
What you may try to do, for a start, is to reinstall the ROM upgrade once again, USING THE USB CRADLE and nothing else. Better remove the SIM card before installing the upgrade. Also, make sure that the battery is fully charged. All through the upgrade process, do not touch the device.
Finally....
Next day When i was in my job put my imate in the cradle, ran the upgrade and it worked.....I am happpppppy ¡¡¡¡
Upgrade failed
I had the same problem as dherrero. However, I have no luck as him. My XDA II still dead can not be boot. Anyone can help? Thanks.
IT's DEAD
I have a MDA from T-Mobile for 3 weeks now. I find out about the rom update (RUU16006WWE_T-mobile_NL.exe), tried it and got the message that the update failed.
On my MDA screen therse is only the message "USB v1.01".
Running the update again doesn't help.
Is there a solution or do I have to contact T-Mobile?
Hi all ,
One of my Friends had the same problem , he tried another computer and it works , then guess what was the problem ???? We found that it was ZONE ALARM !!!
So please check You'r computers guyes ,it might be another software makes the upgrade failed .
Thanks
Hi all!
We have to be aware, that the upgrade program says "NO PROGRAMS RUNNING ON THE PPC AND NO PROGRAMS RUNNING ON THE PC ITSELF"
It's a hard lesson i learned years ago while flashing a BIOS..... if possible, do it at an UPS equipped PC (or notebook btw) to reduce your chances of killing your device.
Windows XP has many more programs running than one would suspect. As a first measure, kill all the ones you can in the right side of your taskbar, shut down your Anti Virus and Firewall, and cross your fingers while upgrading.....
Should we also shut down Activesync? Or is it needed for the upgrade?
Thanx.
I am in the same boat this day. Please help !!! I tried to upgrade the imate threw the club imate ... i downloaded ok i believe ... i did not use the cradel just a mini sync usb cord ... i used this before many times to sync... but when i tried to run the official update it stopped and now it says only serial v1.02 when i put it in the cradel it says usb v1.o2 its dead... no light for batter scharge nothing???? no sync at all please help
ActiveSync is not involved in the upgrade process. The upgrade program runs out of this, with it's own connection and settings via USB.
I haven't used the mini cord, so I'm of no help about it.
Try the upgrade program again, looks like it failed to fully flash your ROM. (That's why you don't see the charging light, it's Software controlled)
Good Luck!
mm
Try to update your imate using a cradle connected to a pc(usb). It should work
i have the exact same problem as highlighted by the others here, USB and v1.02 screen. Question is, how do you continue to flash your rom after it fails and you put back your unit into the cradle and activesync does not sync it anymore
the upgrade doesnt use activesync so it doesnt matter. Just put the imate in the cradle(in other pc, if possible) and run the upgrade
qtek rom update problem
hi guys. my qtek only says USB v 1.02. I cannot do any rom flash. what rom should i use. where can i download it from?
I get the message: "Logon to MSN Messenger Service failed because the service is not compatible with this version of the program"
The update is not completely installed. Here are some tips:
After installing, be sure to soft-reset your Pocket PC so the update can take effect
If the battery of your device has completely run down, or if you have "hard-reset" the device (factory reinitialization), the update disappears. You will need to re-install the update each time you set up your mobile device.
Although i did above, i still get this message.
I use the XDA-developers special rom v1.2
Can anyone help me out on this?
did you install the upgrade ms put out for messenger ?
yes i did and still gave the same notice...
i installed the xda-developers special edition rom v 1.2
could that be incompatible with the msn service?
Anyone has the same experience?
Or solved this?
i dont know the special eddition rom is much older then the msn update
could be some files it cant update
most people these days have gon from the spc rom to cooked roms from the kitchens
You have two options, either to go to Microsoft site, Pocket PC section, then download a fix for the MSN. The other option is install the lastest ROM 1.72, it includes this fix
waladany said:
You have two options, either to go to Microsoft site, Pocket PC section, then download a fix for the MSN. The other option is install the lastest ROM 1.72, it includes this fix
Click to expand...
Click to collapse
I sincerely doubt that the 1.72 ROM will do any good in his XDA1-device.
Install the MSN update, and if that doesn't help - Get a fresh ROM either from an official download (www.qtek.se, www.o2.co.uk or whatever) or from one of the kitchens. I think you can even include the msn-update in the ROM when you cook it...
I tried to do a ROM Upgrade but something went wrong and now the screen on my XDA II just shows the words Serial and v1.06. When I did a hard reset the screen still shows the same thing. When I connect the device using the cradle the word Serial changed to USB, but it didn't seem to connect to the PC. The Activesync was not activated also. When I tried to run the ROM Upgrade again, it shows ERROR 100: MODEL ID ERROR. I tried to run HimaUpgradeUT_noID.exe, it shows Error 103: ROM IMAGE FILE NOT FOUND. Can anyone please help me get my device working again? Thank you in advance.
Wrong ID
a few days ago i had the same problem with my HTC Blue Angel (also known as
qtek 9090)
temporaly youre PDA shows the bootloaderscreen. On top it shows youre kind of connection, on the bottom you can find the revision of this piece of software.
try this tool to reanimate youre pda.
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar runterladen.
extract this file into the dir, where you have copied the original ROM-Image from youre developer, put youre PDA into cradle and check, if the status of this connection is changed in USB. Everything o.k? Right now: doubleklick on MAUpgradeUT_NoID and drink a coffee. it takes about 10 Minutes and after this youre pda runs as well. dont forget to copy youre original ROM-Image with the original Installer after finishing this procedure to avoid any errors.
Well, i hope this tutor will help you. i´m interested for.
Wrong ID
a few days ago i had the same problem with my HTC Blue Angel (also known as
qtek 9090)
temporaly youre PDA shows the bootloaderscreen. On top it shows youre kind of connection, on the bottom you can find the revision of this piece of software.
try this tool to reanimate youre pda.
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar runterladen.
extract this file into the dir, where you have copied the original ROM-Image from youre developer, put youre PDA into cradle and check, if the status of this connection is changed in USB. Everything o.k? Right now: doubleklick on MAUpgradeUT_NoID and drink a coffee. it takes about 10 Minutes and after this youre pda runs as well. dont forget to copy youre original ROM-Image with the original Installer after finishing this procedure to avoid any errors.
Well, i hope this tutor will help you. i´m interested for.
[email protected] youre own risk.
Dead XDA II
Hi Guys, I'm new to all this because my XDA has never failed me, until now. I too tried to upgrade the ROM, realising too late that the upgrade from a UK site was not meast for the Asian zone.
Anyway, I tried downloading the following link:
http://rapidshare.com/files/36498840...adeUt_noID.rar runterladen.
When I tried to lanch the file it tells me that RUU.dll is missing.
Is there a link that works or is there a fix for this? As I said, I'm new to this therefore need step by step instruction.
Hope someone can assist, I'm lost without my XDA II.
Thank you
Ben
cannot download from the link
hello
I have a black screen on my qtek 2020i (XDA2i) after upgrading the ROM, and I saw that the solution you are providing works good, but I cannot download the fix using the link
please advice
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar
XDAII Dead
hi,
ive put my MDA into the cradle and get the Serial screen to change to a USB screen. ive downloaded the file and put it with the rom upgrade that i got frm T-Mobile. when i run the program on my computer i keep gettin "Connection Error" screen. what should i do.
pleas advise.
m1000 dead sad
i regreat to say i did try for update my spv m1000 today but my got died now when i tried i did conntect my ppc with ppc via bluetooth actvesync when i run HimaUpgradeUt.exe then a window open and shows mgs wait 30 minunt but after even 1 minunt got error also my phone got stop like dead and screen shows on top serial and on bottom it shows v1.3 i realy .sad. becouse now i cant reeboot also even ui have not data cable any body help me plz what i do now ?
thanks for my help
really want to say thanks who helpd me i upgraded now my spv m1000 my self without any problem becouse i brought data cable of i mate and its workin fine with my spv m1000 yahooooooooo xda roken
usman_hussain1987 said:
hi,
ive put my MDA into the cradle and get the Serial screen to change to a USB screen. ive downloaded the file and put it with the rom upgrade that i got frm T-Mobile. when i run the program on my computer i keep gettin "Connection Error" screen. what should i do.
pleas advise.
Click to expand...
Click to collapse
Hi Usman,
What OS of windows PC do you use? it can't work with windows vista. Try to downloads new version of active sync then try it again. The upgrade is specify, can't work in any kind of devices
I have a O2 XDA Atom. I bought it in Hong Kong so it has the Hong Kong (Chinese) firmware/ROM on it. But I want to upgrade to the English version. So I download the ROM update software from O2, but it does not allow me. It says "Error: Country ID Or Device ID Error". What should I do?
I did try to google it, and this is what I came up with. I tried the solution, but it still doesn't work. http://forum.xda-developers.com/showthread.php?p=1613389
PLEASE HELP. I am really bad at Chinese. I can hardly use the phone.
Download ROM you wnat to up.
Run ROM .exe file.After extracting,don't click next button,go to Windows\Temp folder on PC,find pass.32.
Open it with ultraedit32 or winhex,find CHT(with chinese),change to WWE(if you want to up WWE ROM) and save.
Go back ROM update window and click next.After a few step,your phone is had new ROM!
Sorry about my English!
i have the same problem with u
does any body have the solution for me
Henry2007 said:
I have a O2 XDA Atom. I bought it in Hong Kong so it has the Hong Kong (Chinese) firmware/ROM on it. But I want to upgrade to the English version. So I download the ROM update software from O2, but it does not allow me. It says "Error: Country ID Or Device ID Error". What should I do?
I did try to google it, and this is what I came up with. I tried the solution, but it still doesn't work. http://forum.xda-developers.com/showthread.php?p=1613389
PLEASE HELP. I am really bad at Chinese. I can hardly use the phone.
Click to expand...
Click to collapse
Believe (correct me if im wrong guys, IMO) if you upgrade from one of the ROM's available here at the forum. lets say any updated WM6 cooked rom or even a WM5 that is WWE . it will change everything! the language will be english since it's a WWE.
the error: "Country ID or Device ID Error" has been posted here for the nth time already. You need to enter bootloader mode "camera+reset" prior to upgrading the ROM.
Upgrade Procedure: FYI
1. Put device to bootloader mode: (CAMERA+RESET)
2. Connect device to PC under Windows XP using USB cable
3. Extract files to Windows/Temp then execute Device Software Update Utility.EXE<-(DSUU for Atom Pure)
4. Follow on-screen procedure
I looked through as many posts as I could but maybe I'm not doing it right.
I flashed the android 2.2 ROM on my HTC HD2 from O2 but now I need to go back to windows 6.5 which was originally there. I dont have the official ROM and I would be very thankful if someone could send me the correct link to how to do it or how to get the official ROM.
Just a reminder I have an O2 HTC HD 2
Thanks to anyone and everyone who helps !
you didnt say which country, so i will assume UK.
first, run hspl.exe (the one you used when you installed hspl) but this time choose 2.08.0000
then
get 1.72 from htc website
http://www.htc.com/uk/SupportDownload.aspx?p_id=297&cat=2&dl_id=960
phone into bootloader, connect usb, run the 1.72 rom.exe
If you didnt mean UK, go to teh htc website, choose your country, choose your phone, click support, downloads, change the dropdown from 'all' to 'rom updates', find teh one that says o2 and use that.
thanku
thanks bruv ... ill look into it !
i still have an issue that the phone keeps restarting or gets stuck in a while !
There's a 3.14 rom, you could try that, but it could also be faulty....