ok i just bought a Qtek 1010 second hand and it will hold battery and do every thing normal but after about 30mins of using it it will turn itself off i noticed last night that there are two screws missing from the back of it and was wondering if that could contribute to the proble
p.s the battery has not dropped it just turns its self off
battery measuring of it own change is not 100% reliable
just because it say it's not empty dont have to mean that it's not
help
so what do you sugest because the green light is on the top of the qtek1010 when it is in the cradel so do you have any ideas on what i could do to rectify the problem whith the qtek 1010
Related
I have upgraded my Himalaya to 1.50g and yesterday forgot to charge it and now it won’t turn on even I’ve put it in the cradle for 2 hours now. How can I fix it and prevent it from happening again? It didn’t happen to me before upgrading to WM0.5
tried reset both the normal reset and the special 2005 hardreset ?
Yes, I’ve try both. But no sign came. Only the red light gets on when I put it in cradle
Put the battery off and place it on the battery slot behind the cradle..
if still the same.. reply ASAP!
I’ve charged the battery since got your advice but it did not help also
I can not see any sign that my Himalaya is alive but the red light when connected with the power supply. With the power I’ve tried to come to bootloader mode but without success. It didn’t respond any more
I’ve just managed to wake it up one time. It comes as from hardreset. The battery indicator showed backup battery 100%, main battery 34%, but it last only about 5 minutes then come off again and the red light come back
sounds like a hardware issue with the battery
or a very very naugthy unstd sim card
Now it’s working again!
Thanks lot! I have cleaned it from inside out let the battery full charged for 1 night, managed to hardreset it, reinstalled the rom and now it’s working again
Hi there,
I have a special question to my G4 witch i do not get in operation anymore: The Problem is, that the device does not turn on, independent any keys. Either the ON-Button, Soft-Reset, Hard-Reset i do not get any of the "normal" screens. The display does not light.
Additional, the red power-charge-LED does not light when i plug in the USB-poer-supply. The same, if i disassemble the battery and plug the G4 to the power-supply...
The device has not been used for a couple of months. The last action a Upgrade to WM6.5 that worked definitively fine for a while.
Has anybody an idea? Or happend before?
Thanks in advance
Ernie
i think it`s easy
hey .. i doubt you have a problem with your g4 phone, i think you have a problem with the battery. since you left the batter inside the phone for alot of months and you didn`t use it, i think the battery is super dead, so dead, that the g4 cant power off and go to charge mode. 1 : you could try letting it charge more, like .. 1 hr plugged in , orrr , you could find an universal charger, which charges the battery by touching it`s + and - with it`s pins and putting electricity in it. (sorry for the bad explanation but i`m from romania). I think one of them two should work, if you know some other friend who has a working g4 just try with his battery. Good luck ! ^_^
Thanks for your reply.
But it happens without (!) the battery: If disassemble the battery and connect afterwards the power cable, the red LED does not flash, and no key has a function. As Soft-Reset "switch" and Hard-Reset (2-button on the left plus Soft-Reset-Switch)
First i mentioned the same as you thought...
Has anybody an idea what can be done here?
Thanks in advance.
Ernie
I'm encountering this same problem. I let the device charge over night with no luck. It will not power on at all. The battery was working fine last week. its completely dead
My Universal turn on the red LED for a seconds and after that do not charge and do not turn on. Have you find any solutions?
Thanks
exactly the same problem here on touch 3g
i got my touch 3g in Jan 2009 in Shanghai,China. Now i'm in singapore.... it's bricked, i didn't do anything wrong, it's not dropped on the ground or into the water, yesterday it was fine, but this morning i just found that it's power off. plugging in the power cable , and i won't see the orange power led. it's completely dead, soft reset and hard reset can not be initiated, because it refuses to power on.
i'm going to htc care center at harbourFront next weekend ...
JeromeMorrow said:
My Universal turn on the red LED for a seconds and after that do not charge and do not turn on. Have you find any solutions?
Thanks
Click to expand...
Click to collapse
oglop said:
i got my touch 3g in Jan 2009 in Shanghai,China. Now i'm in singapore.... it's bricked, i didn't do anything wrong, it's not dropped on the ground or into the water, yesterday it was fine, but this morning i just found that it's power off. plugging in the power cable , and i won't see the orange power led. it's completely dead, soft reset and hard reset can not be initiated, because it refuses to power on.
i'm going to htc care center at harbourFront next weekend ...
Click to expand...
Click to collapse
You’re in the wrong section this is the Wizard forum.
I use a universal charger. Its one which takes the battery not one which plugs into the phone ...
whenever I let my phone run flat I leave the battery in the charger for a couple of hours then put it back in the phone and connect the phone charger. Once there are enough electrons whizzing around in the battery there's enough power to drive the IC that manages the charging in the phone ...
if the battery is too flat it won't even open the gates for you ...
HI,
I purchased Touch Dual from UK as SIM FREE unit last year. Couple of days back i checked the HTC web site and saw the WM 6.1 upgrade from HTC available there; So yesterday i downloaded that file i.e. " RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship " and upgrade the device.
At the time of running the RUU the unit battery level was 70% and after the upgrade the battery was almost 55%. So i kept using the device and that was perfect. Anyhow i forgot to recharge the device and next morning i realised that Unit went off somewhere during the night. So i simply attach the charger cable with device but immedately i realised that the usual orange light hasn't turned on and after a while the red colour light shows up instaed of orange. Upon seening this i try to turn on the device and its turned on BUT went into AEROPLANE MODE automatically and stays there. And above all the BATTERY ALWAYS SHOWING THE CHARGE LEVEL IS 0% besides the fact that unit is continiously charging from the last 24 hours....
And if i remove the charger the becomes dead..
Any suggestion would highly appreciated.
This can mean two things:
1. Your battery is broken
2. Your charger doesn't work well (I had this with a blackberry charger I borrowed from someone)
The second is the easiest to check if you charge it with a usb cable instead of the charger you can see if it works or with another charger of course. It switches to airplane mode when the battery level is to low so don't worry about that. The led is red when it really has no battery level at all so also nothing to worry about
Good luck.
wmn79 said:
This can mean two things:
..... nothing to worry about
Good luck.
Click to expand...
Click to collapse
Thanks for the suggestion. The problem is solved ... Now i know that if battery went to ZERO level than one must remove the SIM and charge the unit.... for atleast the initial 10% charge level... after that insert the sim into unit...
Anyway Thanks again
I just bought a Touch Dual on eBay, its running a WM6.1 rom with spb Shell and I really like it. I noticed something very strange as soon as I put the battery in, a red light comes on when the phone is switched off. I thought that maybe it was because the battery may have been flat, but after a full charge when the device is powered off a red light stays on!
Any ideas anyone? This can't be good for the battery life.
Okay, I was thinking what the problem could be, maybe it is a registry setting that you have to change but I can not point you to the right direction, the only 2 solutions i can think about is to flash another rom and see what happens otherwise download this http://www.4shared.com/file/139838962/14bdb14/KaiserNotification_cab.html it is built for the Kaiser so you can play with the led's I don't think you can use it for that but I'm almost sure you can use it to to turn off al the led-lights.
Sorry, that I can offer you a real solution but maybe someone else can help you to solve it.
Goodluck
i have the same problem with mine. Here is when it happens....
Battery totally drains
Phone switches itself off
When try to charge red light
When switch on screen flashes and you get battery warnings.
The only way i found to get around it was to alternate batteries or to remove battery for 10 mins and try again.
-----------------------------------------------------------
HTC Touch Dual
WM 6.1
Manilla 2.0.1917...
Hey...
My Mozart seems to have stopped working. The battery run out this morning when I was in university and ive just got home and plugged it in to find that the red led is flashing up the top! Its flashes for a while and HTC comes onto the screen, it then shows an image of a battery on the screen then nothing, no lights, no charging, no booting.
Help!
i see well that happened to me, you seem to have drained the battery. the best solution is..
keep it charged for a while..
if it does not work.. remove the battery for a while then bring it back and charge again,
just let it charge until the battery regains enough power to boot the phone.
never let the battery fully down /!\
the smartphone Have to be charged before the battery nearly 30% otherwise u Will deteriorate the lifetime of u'r battery
Hi, I would like to know if the problem was the battery or hardware related? I am having this same problem and Im about to go to the phone shop to get this looked at... after being on the phone to someone who speaks the worst broken english for 20 minutes!
Thanks.