Hi,
I am having this problem with my Wallaby (Siemens SX56).
Although the battery is fully charged, it is not turning on by pressing on/off button when it is not connected to power. But as soon as I connect to the power cable, it turns itself on in reset mode.
Anybody familiar with this problem? I would really appreciate any help from anyone.
You can contact me directly on my email: [email protected]
Thanks a lot.
Sanjiv
Related
In sum, earlier today I was using my phone with no problems-- calls, texts, using apps etc. I went to 'close my screen' when I was done using it and I realized the side power/lock screen button was not working and my screen was not responding when I wanted to lock it. I removed the battery hoping it would reset the phone and fix what was wrong but now my phone will not turn back on. I plugged the phone into the wall for at least 30 minutes as well as plugging it in the computer for quite some time. No response from the phone at all. (no charging icon, computer is not detecting the usb cable when plugged into computer, etc.)I also held the buttons down to try to power on as well.
I was wondering if there was a way to fix this problem, or somehow retrieve files (mainly pictures) from the phone,
Thank you for your help. Any feedback will be greatly appreciated.
Andrew
samsungs424 said:
In sum, earlier today I was using my phone with no problems-- calls, texts, using apps etc. I went to 'close my screen' when I was done using it and I realized the side power/lock screen button was not working and my screen was not responding when I wanted to lock it. I removed the battery hoping it would reset the phone and fix what was wrong but now my phone will not turn back on. I plugged the phone into the wall for at least 30 minutes as well as plugging it in the computer for quite some time. No response from the phone at all. (no charging icon, computer is not detecting the usb cable when plugged into computer, etc.)I also held the buttons down to try to power on as well.
I was wondering if there was a way to fix this problem, or somehow retrieve files (mainly pictures) from the phone,
Thank you for your help. Any feedback will be greatly appreciated.
Andrew
Click to expand...
Click to collapse
Did you try to boot into download mode?
1057
michaely123 said:
Did you try to boot into download mode?
Click to expand...
Click to collapse
I attempted to hold volume down, power and home buttons but the phone did not respond. The computer is also not recognizing it while plugged in via usb. The button does not seem to be 'stuck' as i can still hear a slight clicking sound when I press it.
Try removing the battery and hold power down for 30 seconds and then try installing the battery again.
Try that ^
maybe a jig might help
after screen replace
device isn't turning on
when I plug charge cable in
it vibrate once
I tried many things
hard reboot (volume up+power button)
it vibrate three times but still not working
and also it doesn't work anymore
push reset button next to sim slot
not work
any suggested solution to solve?
Send it back to service and tell the guys that screen is not working and its due to service's mistake. Dont forget to say you are not responsible for the problem and will not pay money.
Hello everyone,
i got a problem with my z ultra and have tried looking similar problem on this forum but none of the solution seems working.
Please note that i have a stock phone, never did anything to it including unlocking rooting etc as i have no idea what it is, just casual usage.
So the problem occured when i tried to move an apps from sd card to my internal storage, and then my phone freezed midways,
the phone went unresponsive just showing the freezing screen.
Then i pushed the red button near the sim tray hoping the phone will reboot as i had similar problem before, and thought that it was just another minor problem and it worked.
But this time after pushing the red button the phone wont reboot again after i try to turn it on again using the power button, only a vibration but the screen showed no display whatsoever.
Ive been looking a solution on this forum with similar problem and there was a suggestion to connect the phone to power source and push the power and + vol together but there was only vibration thrice without indication of my problem has been solved.
Ive also tried a solution on youtube to disconnect the power cable, charge it to power source, wait for the Red LED to blink and reconnect the power cable again but it wasnt working.
Long story short after trying several method now my phone only blinking Red LED 3 times when i tried to turn it on, i tried to charge it to full but the Red LED keeps showing on even after i discharged it, so i had to push the power and + vol button to turn it off.
I suspect that my phone is hardbricked looking at the symptomps
Please anybody here could help me to fix it?
It's probably not hard-bricked.
Try this,
1, connect your USB cable to PC (without phone connected to it )
2, press volume up button and then plug in the usb cable to your phone
3, if light goes blue colour then you are back in business and you can still revive your phone
step 3 if successfull means your phone is up with fastboot mode and you can upload a recovery via flashtool
let me know your results ,
rgds
Hi, I'm not sure how to start this, sorry..
My LG G5 has a problem where every time I plug in a OTG cable, a notification comes up that says power supply.. When I tap on the notification it give the options like charging only, power supply, MTP etc..
If I tap on MTP, the notification will go away, then will pop up again POWER SUPPLY. It is very annoying.
Not sure how to fix it. Any help is appreciated! Thank you!
Maybe the otg is lose thaty why its fluctuating try again by placing the phone on any surface like bed or table plug the cable and try not to move the phone and cable, this is what i do when i connect my phone to my computer if the phone is in my hands then i face the same problem so i follow this method i mentioned
I was searching for a solution for my contact sync issue and I needed to reboot. After pressing reboot, the screen goes blank and I cannot boot again. Volume up + power doesn't work. Plug in power and the light didn't turn on. Even try to hit the tiny hole that looks like reset and that didn't work with. Help!
I am on official miui 9 with Google installer
Did you hold the power button for a longer time?
Yes, try holding the power button for some time. One time, after fastboot, it took around 90 seconds to power up.
there's a tiny hole that looks like a reset ????
did you poke the mic hole?
rioru said:
Yes, try holding the power button for some time. One time, after fastboot, it took around 90 seconds to power up.
Click to expand...
Click to collapse
Hi Rioru, did you ever find a solution to your issue. After charging last night, suddenly I had exactly the same error. Which means I cannot boot the tablet, Power+Volume UP does not respond, charging LED not responding and after connecting to a PC I cannot not establish an ADB connection.
Thanks!
mailis said:
Hi Rioru, did you ever find a solution to your issue. After charging last night, suddenly I had exactly the same error. Which means I cannot boot the tablet, Power+Volume UP does not respond, charging LED not responding and after connecting to a PC I cannot not establish an ADB connection.
Thanks!
Click to expand...
Click to collapse
Hi, I think you're quoting the wrong person here. It's not me, it's spx2000 had this problem.
I have two...1st mi pad 4 flashed many ROMs looking....2nd mi pad 4 on first flash device will no longer boot. PC with miflash starts flash but errors on com port. I have tried cables and different ports. Need help . Black screen
Tablet is seen in win as Qualcomm....miflash sees device as I try different USB ....flash always errors unable to read comm port xxx. Not sure what to try next.
Same issue here, MiPad4LTE. Mine just died while playing mobile legends. Power wont turn on. Even when charger is plugged, LED won't light.