Hello to everyone,
one of my installed applications (TT5) needed a patched file. After
installing this patch my phone and contacts does not work anymore
(more accurate: Phone & contacts apps does not show any GUI - it
doesn't matter how I start them).
After removing the mentioned application I tried a lot to get them work
again, but without success. I decided to reinstall WM5.
Now the buttons HW-buttons does not work. They try to start the linked
app, but nothing happens - the taskbar shows shortly the name of them.
Also they are not displayed by the taskmanager.
Everytime when I reinstall WM5 (HimaUpgradeUt) I recognized, that
previous installed stuff is still in memory.
My Questions:
How can I make a REAL CLEAN BLANK WM5 installation (inclusive other
memory parts, if the above mentioned patch was destructive to them)?
If you have any question, I will try to answer them here.
Thank you in advance!
Hi...
enter bootloader mode by pressing power button+camera+record+reset....wait for about 4 seconds,then the bootloader menu will appear...
U will have 3 choicesnavigate with the record button,change status with camera button,confirm with navigational pad)..
enable kitl----leave it no
clean registry Hive-----change to yes
Format Storage-------change to yes
RAGO :lol:
Thanks for fast reply.
This does not work for me... any other idea???
Current setup (I downgraded few minutes ago):
-------------------------------------------------------
WM2003
ROM: 1.72.01GER
Radio: 1.17.00
ExtROM: (-nothing entered here-)
Thank you in advance!
ur current setup shows that u don't have Magneto on ur device anymore....therefore,my 1st post instruction won't work unless u have WM2005 installed....
Magneto install softwares and data on Rom,so they are persistent memory and will survive even flashing....
now do the following:
-access the storage folder from ur explorer (not windows exp.) and format it....
-unlock or unhide extended ROM...the delete all data....
other way?....here u go:
-reinstall Magneto on ur device,then do what i advised in my above post....u will have a clean storage...then downgrade if u want.... :wink:
Good luck...
RAGO :lol:
Hello,
the past few days I was not at home...
Ok, I manged it. Thank you all for fast helping!!!
Have a nice week @all
Related
Hi,
i have a 32mb xda and after upgrading to wm2003 i lose the checkboxes in dialogs, if i soft reset then they come back for a while and tapping on the text next to the box enables/disables the option but i get no boxes!
most strange, also i had to turn off the ir recieve but when turned off i still got the error for com 1 with navigator, i had to uncheck it then soft reset to apply that change.
i cooked the rom from jeffs kitchen a while ago and was going to redo it but it is unavailable and Yorchs only has the 4.0.05 rom.
Any ideas on the missing dialog checkboxes.
Regards
Smallboy.
Hi ! I had the same problem (even with no other app installed ! Just wm2003 and nothing else) , and I never solved it ... till the 4.01.00 went out. I tried this one and had no problem. All attempts I made with earlier versions were unsuccessfull ! Unfortunately, no rom kitchen use this version yet ! So I have a 'blank' rom version from T-Mobile found somewhere on a post on xda-developers.
Hope this help !
cheers for the reply,
as i unbderstand it the 4.1 rom only support gsm 900/1900 which is no good for me as a uk/orange customer.
regards
I have the same problem.
Im using an xda 2 on o2 with the following software
tom-tom navigator 2
gps 2.08
towa's patch
resco explorer
pocketinformant
spb pocketplus
claunch
clearnotify
Anyone else see a pattern?
Surur
Ditto for me. They're still "there", if you click your stylus over where they should be, you'll get them to work.
A reset clears the problem.
Looks like there's a leak that is using up the GDI heap. You can get the same type of error on desktop Windows.
the error is caused by navigator, i installed v2.24 on mine and also when i installed it on my mates xdaII he now has the same problem with checkboxes and radio buttons missing, they come back after a soft reset but go after running navigator..
Smallboy
smallboy. You can use 4.01.00 on Orange as long as you only update the CE Rom and not the radio stack. Just make sure you don't go onto the Band select page on the phone settings.
Hi Swifty,
Can you give me a dl site for 4.1.00 rom.
cheers m8
ftp://tmobile:[email protected]
You need to just extract the CE rom using something like winzip, then use XDA Tools to put it onto an SD card and flash to your phone.
HTH
Neil
cheers Swifty, i have this now, all i need is a way of making the nb1 file into an .exe
UPDATE
I have now reflashed to 4.01.00 (t-mobile) and then installed navigator and voice but not gps, upgraded nav to 2.24 then installed gps 2.09
No missing checkboxes now but stil get the initial strtup problem of no map, which is cured by going to navigator mode.
Hi!
SE rulezzz ...but i have one problem: while my MDA is craddled or on external power, power button is OK. But on battery power (& not USB craddled to PC ) first push - turned off my device (its OK) but second push not turned on - only result is green led is off . While somone call to me, my device automatically is on, & all i s OK. I mean, this is a software problem...Maby registry tweak is needed??
TNX
just wonder what version of OS you running??
no problem on my CH Win2k3SE
tested , just like normal
I had same problem after installed the "Vito Buttonmapper". When I was uninstall it and proceeded a hard reset, the power button working again...
by Avers
OK,
ROm v. 2.06.00WWE
ROM date 06/14/04
Radio 1.14.00
EX ROM...hmmm....2.06.100a combined with extensions of ERA
next i add PHM tools, KSE True Fax 2.0, Fonix Voice Apps...
i had this problem on SE but because i restored my back up files, BTW maybe you want not to restore your information i found it makes it much more stable
Same problem here with 2.06. Hard reset doesnt cure it. Also I don't have sound from the audio jack anymore with this rom....
Make sure you don't have frontlight_wavedev_dim.sa.CAB in your extended ROM. This caused me problems too.
A second hard reset with empty extended rom did cure it though, also I have audio again. Will now put the cabs back one by one to see which one is the culprit ......... to be continued
TNX guys, maby hard reset is only way to remove this problem. This weekend i will try to do this, and will be testing, which aplication cause this problem.
I only installed the camera from ext rom and everything seems to work including gprs, bluetooth gps, contacts, audio.
so i figure why clutter my mda with all kinds of stuff that I evidently don't need ? so I left it like this and I now have a perfectly stable SE rom
Final
Hi All
Now all working gut . I has clear EXT ROM & im testoing all CAB's separatelly....The "bad boy" is customization CAB from ERA (not SE).
TNX 4 All!
caller id don't start even i run photo contact or run IA_CID_StartUp
any idea ?
since i install the new ROM, i cannot see the Extended_rom even i use ExtromTools unloker and unhide ....
the first time i boot, it's working, since no way.
thks
Conovor
try installing callerid again from another cab
it worked for me when i installed another version then removed it again!!!
Hi,
do you use Wisbar ?
When I upgrade my Qtek 2020 to Sin Merged rom, same problem occurs.
But I find out it was because Wisbar 2.1.10.
Just when upgrade Wisbar to last beta 2.1.14 the problem was solved.
Without Wisbar, caller id worked just fine.
AF
no, i don't use wish bar.
Hello !!
I have qtek 1010 german version! After i read the links i decided to upgrade the rom version, because i barely manage in english, not to metion german.
I downloaded a rom from http://www.romkitchen.de, i complete the setup with no errors and i thouht it was a success. Now in start menu i only have Recent Programs (with no access to tap on it), Today, Find and Help, and the screen logo xda-developers.com. Cant do anything the best result when i tap something its : "No program memory available. Tap Start>Settings>System tab>Memory, stop programs that did noy not automatically stop, and try again". But in start i have nothing
I downloaded another rom version 4.01.12_ENG, but now i can not connect the pda with activesync, so i cant make another upgrade.
So, please, help!!
Thanks, Regards!
Hello there.
In some occasions the roms versions has that problem, that is after upgrade, you cannot upgrade another one.
Itś simple, if you have a card reader external, you create a image from OSImage available in this site to the SDcard.
Then you reset the XDA by pressing the on botton in the same type you put the pencil in the botton of XDA.
It will start with Bootloader, then if ther is no problem at all, it will ask you if you want to install that rom that you have on the SDCARD.
After finnish you have to do a Hard Reset.
Then i think for mi experience that you have your problem resolved!!!
Hi there
I have Hermes100 (i.e. imate jasjam) I have flashed the WM6.0 properly and it is working very good but something was noticed and I dislike so much:
in WM5.0, when you close the app it is really closed and if you check it from setting ------ system ------ Memory ----- running programs
u will not see it any more (this is in WM5.0 after press X for any programs)
here in WM6.0 "my version is TNT2.0" which is an upgraded version of crossbow windows mobile version; the matter is:
1- when u close the program or any other app just like contacts, calender ...etc it is not closed, and if u check:
setting ------ system ------ Memory ----- running programs
u will see all the applications that used to open !!! .....
2- I tried the feature of: TASK MANAGER
which enable u to a real close after press X for whatever program or application, when I did this I noticed the following:
- very slow to apply the closing (and some times it take a few seconds)
- and the most disliked thing is that when close "contacts" {I said contacts because it is the only one do the problem} the JasJam freez while closing it and nothing happen ... I waited for seconds, minutes .. nothing happen
so I forced to do a reset to quit this freezing !!!!
The Primary solution:
1- reset the jasjam
2- to close every application manually from
setting ------ system ------ Memory ----- running programs
one by one ..... but leave the contacts application running !!!
Please help !!! I felt board of this ...... Help me plz
Hi.....
Any further help guys ???
Imado said:
Hi.....
Any further help guys ???
Click to expand...
Click to collapse
Hmm.. As default WM5 does NOT close apps properly when you click the [X] button - and ditto with WM6. App closing is managed by Windows itself.
Try installing the HTC task manager which allows you to "minimise" an application by pressing [X] or close it properly by pressing and holding [X] (depending of course on how you configure it!)
Do a search and you will find the cabs to install it.