Hi, i am working in a projecto form wm2003. The customer wants to know if exists any users managment in the operative system, independent of the application that we are developing. for example, the customer want that when the pda starts the user enters a user and a password and if the fails for 10 times then the pda is hard resetted. Do you know something about it? may be some utility? some api of the OS?. Could we develop a tool tha substitute the tipical 4 digists security pin of wm2003?. Thankss
please DO NOT post your Q to every topic - it is really annoying :evil:
by the way: in one of your topic you'll find my answer to your question...
so, nothing personal...
cheers,
ym
looks like You are searching for
http://www.pdadefense.com/products.asp
but...
but if someone hard resets the pda then this software will be erased and he will use the pda
You could set the xda 2 so that the program auto loaded from extended rom after hard reset, you could even store the data for the program in the extended rom also. There is also the storage area in flash rom that is not erased when hard reset.
Hello,
How are you?
I have a xda, and unfortunately it has stopped working properly.
The problems i am facing are:
1/. I am unable to connect to it via activesync
2/. I am unable to enter the programs folder. I am however able to go into settings.
3/. When i start many/all of the programs, it says that there is not enough memory and that i should go to the memory manager and close a few. The problem is that there are no programs open!
4/. When i do a hard reset, the above problems to do go away!
Now, i last thing i have done is to install the slovoed dictionary program. The program installed fined and said that i need to reboot the device inorder to update the registry.
After reboot, all these problems started ;-(
Before i install this it worked fine!
Please help me. I really need to fix my xda.
I only have access to the sd card. I can not connect via active sync.
Can someone point me to where i can find a full back up, so that i can put it on my sd card and over write everything that is one my xda.
I am not sure exactly what i need but I am sure someone who has a greater expertise on this does.
I much appreciate all your help.
Regards,
Monza.
hard reset
Have to perform a hard reset. After a hard reset the OS of a Pocket PC is reloaded from ROM, and you start with a blank system, only the OS and some applications. Also all data will be gone.
The XDA's stylus exists of 2 parts. Twist and unscrew them. Use the grey plastic part of the stylus to hard reset the XDA.
It is all in the manual.
Hello to everyone,
one of my installed applications (TT5) needed a patched file. After
installing this patch my phone and contacts does not work anymore
(more accurate: Phone & contacts apps does not show any GUI - it
doesn't matter how I start them).
After removing the mentioned application I tried a lot to get them work
again, but without success. I decided to reinstall WM5.
Now the buttons HW-buttons does not work. They try to start the linked
app, but nothing happens - the taskbar shows shortly the name of them.
Also they are not displayed by the taskmanager.
Everytime when I reinstall WM5 (HimaUpgradeUt) I recognized, that
previous installed stuff is still in memory.
My Questions:
How can I make a REAL CLEAN BLANK WM5 installation (inclusive other
memory parts, if the above mentioned patch was destructive to them)?
If you have any question, I will try to answer them here.
Thank you in advance!
Hi...
enter bootloader mode by pressing power button+camera+record+reset....wait for about 4 seconds,then the bootloader menu will appear...
U will have 3 choicesnavigate with the record button,change status with camera button,confirm with navigational pad)..
enable kitl----leave it no
clean registry Hive-----change to yes
Format Storage-------change to yes
RAGO :lol:
Thanks for fast reply.
This does not work for me... any other idea???
Current setup (I downgraded few minutes ago):
-------------------------------------------------------
WM2003
ROM: 1.72.01GER
Radio: 1.17.00
ExtROM: (-nothing entered here-)
Thank you in advance!
ur current setup shows that u don't have Magneto on ur device anymore....therefore,my 1st post instruction won't work unless u have WM2005 installed....
Magneto install softwares and data on Rom,so they are persistent memory and will survive even flashing....
now do the following:
-access the storage folder from ur explorer (not windows exp.) and format it....
-unlock or unhide extended ROM...the delete all data....
other way?....here u go:
-reinstall Magneto on ur device,then do what i advised in my above post....u will have a clean storage...then downgrade if u want.... :wink:
Good luck...
RAGO :lol:
Hello,
the past few days I was not at home...
Ok, I manged it. Thank you all for fast helping!!!
Have a nice week @all
Hi everybody
This is my first post on this forum. Sory if my english is not good enough ))
I have a problem with my TYTN.
I got from my friend last week.
It worked normaly first day, then suddenly camera and memory card stoped to work. Couple times there was some error messages about the camera, but now it simple doesnt work. In "About" tab in settings menu write " Expansion slot: In use" but I can't access to the memory card.
I tried to flash it to different types of ROM, but it's all the same.
I didn't only try WM5 ROM-s
Does anybody know what's the problem?
Thanks
hello everyone,
i'm a newbie and just tried to flash the rom of my phone to a newer version and then i got to the point where i needed help.
my phone is x10mini baseband m76xx-tsncjolym-53404015 with kernel 2.6.29 and 2.1.1.A.0.6 firmware.
first i root my phone http://forum.xda-developers.com/showthread.php?t=833722
then i install xrecovery http://forum.xda-developers.com/showthread.php?t=878426x and copied everyting to system/bin ...
after wiping the settings (factory settings) in xrecovery, installing MIMICM6 1.00 and restarting, i got an error message saying "com.android.phone has stopped unexpectedly" repeatedly (each time two messages) and also no network (gsm) connectivaty.
then i though that maybe i need another rom.. so i tried xCyanogenMini - Gigglebread - v10 and got the same thing. same with Srom-2.3.3Gingerbread-v1 and then ... i decided to try to go back to factory-empty-backup and i got network connectivaty and no error messages whatsoever.
so it seems that my phone dont like non-official roms?
any help in this matter ?
thanks,
elad
eladmagen said:
hello everyone,
i'm a newbie and just tried to flash the rom of my phone to a newer version and then i got to the point where i needed help.
my phone is x10mini baseband m76xx-tsncjolym-53404015 with kernel 2.6.29 and 2.1.1.A.0.6 firmware.
first i root my phone http://forum.xda-developers.com/showthread.php?t=833722
then i install xrecovery http://forum.xda-developers.com/showthread.php?t=878426x and copied everyting to system/bin ...
after wiping the settings (factory settings) in xrecovery, installing MIMICM6 1.00 and restarting, i got an error message saying "com.android.phone has stopped unexpectedly" repeatedly (each time two messages) and also no network (gsm) connectivaty.
then i though that maybe i need another rom.. so i tried xCyanogenMini - Gigglebread - v10 and got the same thing. same with Srom-2.3.3Gingerbread-v1 and then ... i decided to try to go back to factory-empty-backup and i got network connectivaty and no error messages whatsoever.
so it seems that my phone dont like non-official roms?
any help in this matter ?
thanks,
elad
Click to expand...
Click to collapse
1)use SEUS to clean up and install the official FW.
2)root and then install Xrecovery
30backup your fw using Xrecovery
4)copy to your sd card and rename the downloaded CM1 as update
5)install through Xrecovery using the update zip option
6)only then do a factory reset---REMEMBER only after you install your custom ROM
7)reboot
NOTE---ensure that you format your sd card(and avoid having any partition) before you start all this but of course after backing up the contents of your sd card so that you can copy all of it back again.
Best wishes.
.................do press the thanks button if this helps..................
how to make partition of sd card?
epaljr said:
how to make partition of sd card?
Click to expand...
Click to collapse
very easy--start by reading http://www.partitionwizard.com/free-partition-manager.html
....download to your pc the free software,connect your phone with the sd card in it,mount and then use what you have read carefully.
One thumb rule to remember is that the size of the partition that you create should be not more than 10% the size of your sd card---eg if you have an sd card that is 2GB in size.don't make a partition larger than 200MB....
For most of your needs,it is better to create and ext 3 partition,of course PRIMARY.
...do press the thanks button if this helps......
sathkartha said:
very easy--start by reading http://www.partitionwizard.com/free-partition-manager.html
....download to your pc the free software,connect your phone with the sd card in it,mount and then use what you have read carefully.
One thumb rule to remember is that the size of the partition that you create should be not more than 10% the size of your sd card---eg if you have an sd card that is 2GB in size.don't make a partition larger than 200MB....
For most of your needs,it is better to create and ext 3 partition,of course PRIMARY.
...do press the thanks button if this helps......
Click to expand...
Click to collapse
thanks dude.. it works.
@epaljr---glad I could be of some help.
sathkartha said:
1)use SEUS to clean up and install the official FW.
2)root and then install Xrecovery
30backup your fw using Xrecovery
4)copy to your sd card and rename the downloaded CM1 as update
5)install through Xrecovery using the update zip option
6)only then do a factory reset---REMEMBER only after you install your custom ROM
7)reboot
NOTE---ensure that you format your sd card(and avoid having any partition) before you start all this but of course after backing up the contents of your sd card so that you can copy all of it back again.
Best wishes.
.................do press the thanks button if this helps..................
Click to expand...
Click to collapse
hello sathkartha and thank you very much for your quick answer !
what you described is just what i did... step by step... without success so far.
i will try to do anything again from scratch (starting with the SEUS) and hope it will do better this time... will keep u posted.
thanks again
app2sd
btw, i wanted 2 ask - according to the root article in the forum there are two main stages, the root itself and then the installataion of app2sd usind the adb shell... so.. i wanted to ask what is the app2sd for ? is it required ?
thanks!
hey,
sorry about the multiple posts... i've just tried to redo everything frmo scratch.
i payed extra attention to what i actually need todo lol since i'm still little new in this.. and i think that everything was done right (root, xrec, update rom ...) but i still get the same result. right after the initial (2mins) boot when i get the android logo and the 'click to begin' text, i'm getting the same annoying com.android.phone error and i see no network connection on the icons on the top bar.
what can be the cause? the phone seems to be working fine with the original sony rom and the other roms seems to be working fine... only with no network which brings those annyoing messages.
any ideas???
thanks
ohh this is annoying! no computer have come to defeat me so far (i'm a pretty advanced user hehe).., and as u can guess i'm still playing with this thing.
currently the biggest progress that i could make (same on every rom) is that if i'm able to tap the phone into airplane mode the errors stops (but still no network connection ofcourse). then if i leave it on airplace mode, reboot and disable airplane i'm able to go into the network setting for a sec before it crush and even get the list of providers. for a sec it seems like its connecting and then.. the same error. i tried to disable network data, to set only 2g providors.. and any setting i've tried so far gave me the same annoying com.android.phone error.
from what i can understand.. the error that i have is related to the sim card somehow? so i tried to take the usim card off and see whats up.. the result? no error but still no network connection (duh), but this time it seems like everything is working fine? i'm able to get into all of the network settings without airplane mode and etc and list the network providers but nothing more as u can guess because i dont have a sim installed.
anyway, i'm hopeless, dunno how to continue from here.
needs ideas!
thanks again everyone! and btw: this forum kickass!
eladmagen said:
hey,
sorry about the multiple posts... i've just tried to redo everything frmo scratch.
i payed extra attention to what i actually need todo lol since i'm still little new in this.. and i think that everything was done right (root, xrec, update rom ...) but i still get the same result. right after the initial (2mins) boot when i get the android logo and the 'click to begin' text, i'm getting the same annoying com.android.phone error and i see no network connection on the icons on the top bar.
what can be the cause? the phone seems to be working fine with the original sony rom and the other roms seems to be working fine... only with no network which brings those annyoing messages.
any ideas???
thanks
Click to expand...
Click to collapse
just wondering---after installation of CM1 and when your phone boots and you see the opening screen with a green android with the text,you click on the android to begin okay?On the following and subsequent screens,click on 'skip' button instead of sign in etc right upto the stage it ends with 'finish'.
You will then see the launcher and the home screen from which go to 'settings'---wireless networks----mobile networks-----now on this list check and enable data traffic.By default,this is not enabled and it will not facilitate data.
This is the only thing I can think of that you may have to redo properly and wish you all the luck.
Best wishes.
no success yet...
i tried also cm2 and cm1 without success (everything is same), on each of the versions that i've installed i could somehow skip the initial setup and make some testings and all of the versions gave the same results - whenever the phone isnt on airplane mode there is an error message repeating twice each time with about a sec delay between the 'double error popups', in the sec between i'm able to use the phone.. until what i do is being halt by the error message.
once or twice (when starting the phone on airplane mode - aka starting airplane mode and rebooting) i was able to use the phone for a min or so each time with airplane mode off and with network connection (coudlnt make phonecalls but received income calls).
it seems like there is something going very wrong when the phone tries to read the usim card, the only thing i can think of is something related to the service proviers here in israel ? dunno ?
anyway, for now i gave up testings... because it doenst seem to work :-( but my phone is rooted and xrecovery-ready for future testing so please if u have an idea ... lets try! ;-) hehe
thanks again,
cheers,
elad
hey dude
the problem is as you said
the phone trying to read the usim card but it cant
i bet you are on Cellcom
the only way to fix this problem is to replace your usim card
as you know , cellcom holds yellow and white usim cards
and probably you got the yellow one
changin to the white usim will solve your mystery
if you try orange sim it will work on you phone without that error its
throwing at you
jojo1212 said:
hey dude
the problem is as you said
the phone trying to read the usim card but it cant
i bet you are on Cellcom
the only way to fix this problem is to replace your usim card
as you know , cellcom holds yellow and white usim cards
and probably you got the yellow one
changin to the white usim will solve your mystery
if you try orange sim it will work on you phone without that error its
throwing at you
Click to expand...
Click to collapse
hey jojo!
your solution work like charm! (tested it with a usim card of a friend) now i only have to get a white usim card and thats it.
thank you very much for your help! i hope that other people who will face the same problem will find this post usefull..
cheers!
elad