Hi All,
I am looking for a Qtek 9090 housing. Anyone know where can i
get it online from ?
not online, but if its still in warrenty try calling your local bratch of HTC. They offer a 'chasis replacement service' for 40 quid in the uk!!
Hi there, you mention that HTC has local branches in the UK that change chassis...would you have any contact details? Thanks
Go to http://www.htceurope.com/ and register your phone for case booking. Make up some story about a fake problem with the phone and you'll see a cosmetic refurb (or something along those lines) for 39.95. someone will get in touch with you can get it picked up and sent to HTC in milton keynes. And when it comes back your have your blue angel looking brand new!
But I dont know where you could buy the case and fit it yourself. ALSO RESTORE THE FACTORY ROM OR YOU COULD BE IN SOME SERIOUS LEGAL ****!!!
hi,
I am in singapore and over here they sell O2 XDAIIs but, i kinda like the
Qtek 9090 housing ....
hey guys, any idea ?
and today??
We are now in 2007. Does anyone knows were to get the Qtek 9090 back housing (battery holder)??
I don´t know exactly which part you mean. Put have a look here: http://www.apexlaptops.co.uk/Blue Angel.htm
I mean the back of the BA... the big blak plastic were the battery fits, were is the hole for the camera and were the stylus fits...
I don't mind if it is used.. just that is in one piece..
Related
after a bad fall, the connector at the bottom of my xda2 was completly broken... I can't charge it any more, i disassemble my xda2 and i need to find a new connector to replace the old one.
Do you know where can i find this ? (radiospares farnell or other place and with which reference ?)
thank you very much for your help.
I'm on the same dilemma...
I'm looking for a case replacement for my MDA2 since I dropped mine and scratched it.
Let me know if you found a place where to find parts...
I even called PPCTechs.com and they told me that since unfortunately that model is not on the USA yet, it would be very unlikely to find spare parts.
Let's hope there is a place where we can fix our little friends...
and me
ive found all of one company that claims to have a very limited list of xda2 parts
http://www.pdasmart.com/pdaphone.htm $105 for a screen..
no idea of the company or if there reliable but worth a look..
where can i get a black herme housing ?. I want to replace the boring gray housing that the 8525 came with.
Looking for the same thing!
Anyone with some suggestions?
i ordered this one...i'll let you know how it goes.
http://cnn.cn/shop/htc-8525-c-277_322.html
wratran said:
i ordered this one...i'll let you know how it goes.
http://cnn.cn/shop/htc-8525-c-277_322.html
Click to expand...
Click to collapse
Dont mean to bother, but just wondering if there has been any success? Im really interested in this mod.
wratran said:
i ordered this one...i'll let you know how it goes.
http://cnn.cn/shop/htc-8525-c-277_322.html
Click to expand...
Click to collapse
Have you tried it yet?
I just ordered a new Hermes Replacement housing from cnn.cn, however I haven't received it yet.
If you are ordering one just make sure you order the right one for your phone.
For instance, the TyTN replacement body will not work on a 8525 and vise versa...
invictive said:
For instance, the TyTN replacement body will not work on a 8525 and vise versa...
Click to expand...
Click to collapse
I was looking over the cnn.cn and from first looks, it seems like the 8525 OEM black housing will work with the TyTN phone.
Is it confirmed the two will not work with one another? They are the same identical phone but with out the front camera on the 8525. If anyone will or has tried let us know.
I haven't tried, but I doubt it would. If you compare the positions on the different buttons - you can see that it the buttons doesn't correspond on the two different models. I'll buy the housing for TYTN to be sure it fits.
Wonder if they supply a instruction manual with it... Anyone knows?
The 8525 case that cnn.cn has for sale shows a front camera hole but no video call button which is something I would prefer, but where do you get the d-pad from? For those looking for a disassembly of the hermes have a look here on the wiki.I think there could be a really good combination of part to make a really nice looking hermes.
Dangnabbit.
I just ordered that Black Housing, but didn't notice the lack of a video call button. I hope it wont matter during installation on my Xda version
I've replaced the housing on my Vario ii for that of an SPV M3100 with no problems whatsoever - it was really quite straightforward. I kept the t-mobile directional pad as I preferred the look of it.
Changing the housing on a model of hermes with a different layout however is not so straightforward as it involves not only changing the keypad itself but also the little pcb underneath which is slightly different between Herm models.
it is certainly possible to replace the slide mechanism, keyboard and backplate between ANY model of Hermes, and some nice combinations are possible. I have a vario ii orange backlit keyboard if anyone wants it.
chinaonnitrous1!
Let us know how it went
Thanks!
they carried 2 housing...the only different is the key pad layout...so pay attention to the key pad...
This company is very slow in responding to email. I send them 2 email about a week ago asking for shipping date...yet no respond
Thats interesting, I ordered something from them on thursday, I got an email withing hours saying it had shipped with a tracking number...
As for the keypad layout, if you wanted to use the Black case you would have to also find the keypad to match it, as well as the PCB that goes beneath. cnn.cn has the parts for the TyTN, but not the 8525.
Maybe someone with good dremel and case modding skills could make it look good though.
Does anyone actually have the Black HTC TyTN that they were supposedly shipping? I was going to get one, but then everyone convinced me not too, I'd be interested to see some pics though.
I'lll get the housing withhin a week.
I'll post pics and everything.
chinaonnitrous1 said:
I'lll get the housing withhin a week.
I'll post pics and everything.
Click to expand...
Click to collapse
Thanks mate!
chinaonnitrous1 any news on how it went ?
I bought from http://cnn.cn/shop a case for 8525 and the external keyboard because I have a SPV M3100. I am waiting for the package and I'll put some pictures of the case. I hope the quality of the case is ok.
I just received my new TyTN case from cnn.cn. It is a dopod branded case, slightly different colour than my original TyTN case. I guess I would call the colour "graphite".
It is definately an original case off of a phone, it still has the old IMEI and Serial Number on the sticker on the back.
Build quality is good, it doesn't look like it is off a used phone. One thing I noticed however was that the silver metal on the front was slightly pulled up, and there were some adhesive remnants on the side of the case. I'm sure it will clean up fine with a little solvent though.
I haven't replaced it yet, I am waiting on a new keypad circuit board (mine is fried, you have to push it ridiculously hard to get it to work), and I will open it up then and replace everything.
Ordering from CNN.CN was pretty good. Shipping was $5 CAD, and it took about a week and a half to arrive. A signature was required, but there were no fees or duty.
leoni1980 said:
it is certainly possible to replace the slide mechanism, keyboard and backplate between ANY model of Hermes, and some nice combinations are possible. I have a vario ii orange backlit keyboard if anyone wants it.
Click to expand...
Click to collapse
Hi, I'd be interested in the keypad, if it's still available? I've dropped my VarioII and the keypad is slightly bent lol
where did you get the replacement body from?
Cheers
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
They have a Dopod housing here for $53 US
http://cnn.cn/shop/htc-c-277.html
I'm looking for a LCD hehe
EDIT: ended up getting http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260108396462&ssPageName=ADME:B:EOIBSA:AU:11
Comes with instructions and the LCD and a tool kit.
sjbale said:
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
Click to expand...
Click to collapse
Anyone know of any UK suppliers of parts?
Softbank 2MP Camera Part
I am looking for a camera replacement part for my Softbank. I was the part that caused my Softbank to display totally WHITE SCREEN.
Here is the story:
Last five months I accidentally dropped my Hermes on the floor carpet and when I turned it on, it displayed all WHITE SCREEN. I tot the LCD screen was the culprit and bought some LCD for replacement from eBay. I dismantled everything and tried to replace the LCD but it resulted the same WHITE SCREEN. Then I dismantled the Jog Dial and the Camera and reattached part by part. The jog dial caused no problem but the Camera showed positive result on WHITE SCREEN behavior. Now I dismantled the Camera and my SOftbank X01HT works like a charm... Well almost like a charm with no 2MP Camera... LOL...
So I am looking for the part also to put it back on my TyTn...
Hi guys,
Do you know where can I get the TyTN VGA front camera?
Regards
i have a new refurbed TyTN...looks immaculate but is unfortunately suffering from a hybrid brick (corrup CID, no KITL and SPL 1.09)
I have all accessories and original packaging if anyone wants to make me a good offer?? (PM me if you are interested)
should also point out that it has a qwertz keyboard
tytn (spv m3100)
hi guys..
i'm desperate..I can't hear any sound from my pda..I think that my audio hardware broke down..do you know where I can find any spare parts for this?thanx in advance..
first post^^
been looking for these for a long time now and i've never seen the actual 8525 housing at this site, only the tytn/dopod versions, but they're are now in stock!!
just a heads up b/c i read a while back a few people are looking for 8525 housing.
now my 8525 wont be battle-scarred and garish looking <.<;
http://cnn.cn/shop/8525-grey-housing-cingular-p-1852.html
two 8525 phone
i have two 8525 spare part phone. if interested pm me
spare parts for tytn/m3100
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
punkzilla2k said:
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
Click to expand...
Click to collapse
You can find spare parts and accessories here:
http://www.phoneystore.com
8525 front cover and Mail/Explorer rocker needed
Got the phone with these two dented and although it works okay, would like to replace them one day.... anyone have these parts for a few bucks? I can do PayPal real easy....
Thanks,
Ted
Dpad for Cingular 8500
I'm looking for the circuit board behind the dpad of a cingular 8500, if anyone has one left, pm me please.
I am looking for the little cover above the mirror on the back side of the device that is usually part of the battery cover or alternativly the entier battery cover.
If you have them please PM me.
Broken ATT 8525, Touch screen totaled
I was taking photos and drop it right on the face. I was using it as a iPod with a unregistered go phone sim card till I did a Master Reset and now it's a paper weight because I can't do the start up BS. Touch screen is totaled but the rest of the internal parts and battery are good, front cover don't look bad, back is great, have 2 stylus and a hard metal case for it too. PM me here and we'll work something out, Paypal OK. Vince
It's a paper weight to me, I'm not going to put money other than shipping is someone wants to send me a screen for the joy of it, if I fix it I'd just give it to my sister anyway. I'm happy with my Tilt and I'm ready to move on to the Fuse soon, thanks for the replies!!
I travel building Cellular sites a lot and I've been happy with my current Tilt ROM so I haven't logged on and seen all these replies till now. I Love HTC phones and the chefs that put the long hours and headacks into them, They get the big thumbs up from me! Thanks to all also that add and beta test too.
Also I live in the midwest in the US and BASE Jump my towers mostly, if anyone interested in jumping with me let me know and I'll let you know if I'm in the area, I got combo's!!! IF you want to Skydive I live in the Indianapolis area also. --> www.skycircus.com , My DZ 8 miles from home. I'm a Parachute rigger also.
Hebrew keyboard?
I have a TyTN II (T-Mobile UK Vario II) that I'm setting up for a friend in Israel; does anybody have or know where I can get hold of a keyboard with Hebrew lettering?
Thanks
Need a replacement motherboard (main) for HTC TYTN
Friends,
My HTC TyTN has problems with some connectors right on the main motherboard..... I would like to know if anyone has any spare HTC TyTN which is completely broken and can be usable for its spares......
Also, if any one is aware of any site where I can get the mani motherboard...it would be really helpful.
thanks
Milind
I am interested too in a motherboard of Tytn. I have problem that a connector (for a screen flex cable) on my motherboard is damaged. Is it possible to fix it (for example to change that connector with a new one)? Does anyone know how to do so? I really need help...
thanks in advance
If you are looking to replace your 8125 case here's an excellent deal.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=360011196557&ssPageName=STRK:MEWN:IT&ih=023
I've purchased one of these and it includes all the buttons. The antenna cover already had the antenna installed. It even included the black rubber gasket around the display. All I had to move was the ear piece and the vibrator.
I don't know if they are take offs but mine was in A+ shape. They don't include the back cover.
Awesome!
Beats paying $50+ for a new shell...
My only question is; can you move the MDA circuitry to the 8125 shell? Seems logical, seeing as both are the same hardware.
Great find... They also have the wiz200.
thesebastiancat said:
If you are looking to replace your 8125 case here's an excellent deal.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=360011196557&ssPageName=STRK:MEWN:IT&ih=023
I've purchased one of these and it includes all the buttons. The antenna cover already had the antenna installed. It even included the black rubber gasket around the display. All I had to move was the ear piece and the vibrator.
I don't know if they are take offs but mine was in A+ shape. They don't include the back cover.
Click to expand...
Click to collapse
Too bad they don't ship to India...i'd really love to get a new housing for my trusty 8125 as i still intend to use it for sometime...maybe someone can help me out???
i buy from them mask for my qtek9100 and just to know this is old used,in verybad condition mask.Not new
hmm...
If anyone else orders from this seller, can you please post whether or not the parts are in new condition?
Thanks
madnesss99 said:
i buy from them mask for my qtek9100 and just to know this is old used,in verybad condition mask.Not new
Click to expand...
Click to collapse
I got the same housing from this seller and it's brand new! No scratches, no nothing. Just be aware that it does not include the battery cover.
joel32137 said:
hmm...
If anyone else orders from this seller, can you please post whether or not the parts are in new condition?
Thanks
Click to expand...
Click to collapse
I bought one from them and sent a message to them that there was a chip in the corner of one of the pieces.
In the auction listing, it states that they may come damaged but should not affect working order.
So...be aware that there may be cosmetic damage.
They were kind enough to send a replacement, which I should be getting in a few days.
Hopefully, it will be a new piece.
Update:
These guys are great....well in my case anyways.
In the previous post I mentioned that a had a chipped corner on the housing and requested a new piece.
Well, those guys sent out a whole new setup..this one was in great shape....dont know if it was new, but looks practically brand new.
There was never any questions on their end...they just sent out another one.
I would recommend them highly. Great customer support.
O btw, I told them I would send the original one back...they said to keep it.
WOW...top notch guys.
I just ordered one of those cases i'll make sure to let you all know how it comes when i get it!
Very Nice... there were a few minor scratches on the corners and buttons but other than that the housing i bought for my wizard was in great shape! no battery door cover tho
can some post a pick of the how the device looks in this housing?
got mine. no back cover, no screws. so what, do i use the screws from my wizard shell to close the new 8125 shell?
http://www.youtube.com/watch?v=7409Gq51RFE
Gotta check this out.It's alot cheaper than others.
Thanks
I got a Wizard 100 (Cingular Branded) shell. It looks brand new.......not one scratch on it. It didn't come with a battery cover though
Ordered it last night...Should be here middle of the week.I hope it's in good condition.
anyone knows where i can get some extra screws?
i was about to assemble the wizards guts in to the new shell, but the keypads dont line up, if i go along and assemble, i wont have use of the send call button and the end call button, and some other buttons as well
Good Deal
The one they sent me was in great shape!!!
I just ordered a shell for my T-Mobile branded Wizard 200....I hope it will be practically new like the Cingular Branded Wizard 100 shell I ordered earlier...
So iam looking for a Backplate, not the hole cover.
I need the backplate with HD 1080P cause mine broke when it was loose and was stuck to my pants . does annyone know where to order one of these?
http://www.cellphone-repair-shop.co...mera-lens-bezel-cover-hd-1080p-with-adhesive/
http://www.cellulardr.com/motorola-...corative-camera-lens-bezel-cover-hd1080p.html
i live in the netherlands so i need something from within europe please.
Try this =)
http://cnn.cn/shop/motorola-razr-xt910-camera-cover-sticker-p-14756.html
shipping to Slovakia is 5 dollars. so to netherlands may be too 5 dollars =)
Hi I'm looking for the same part, wonder where to find this in Malaysia
get the part number from that website and search on ebay
well, you could just walk into your local motorola service centre and ask for the kevlar backing and that shiny strip of plastic for the camera, I asked and they said that the kevlar back would be about $25 sgd, they replaced the camera thing for me for free =D