Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
They have a Dopod housing here for $53 US
http://cnn.cn/shop/htc-c-277.html
I'm looking for a LCD hehe
EDIT: ended up getting http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260108396462&ssPageName=ADME:B:EOIBSA:AU:11
Comes with instructions and the LCD and a tool kit.
sjbale said:
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
Click to expand...
Click to collapse
Anyone know of any UK suppliers of parts?
Softbank 2MP Camera Part
I am looking for a camera replacement part for my Softbank. I was the part that caused my Softbank to display totally WHITE SCREEN.
Here is the story:
Last five months I accidentally dropped my Hermes on the floor carpet and when I turned it on, it displayed all WHITE SCREEN. I tot the LCD screen was the culprit and bought some LCD for replacement from eBay. I dismantled everything and tried to replace the LCD but it resulted the same WHITE SCREEN. Then I dismantled the Jog Dial and the Camera and reattached part by part. The jog dial caused no problem but the Camera showed positive result on WHITE SCREEN behavior. Now I dismantled the Camera and my SOftbank X01HT works like a charm... Well almost like a charm with no 2MP Camera... LOL...
So I am looking for the part also to put it back on my TyTn...
Hi guys,
Do you know where can I get the TyTN VGA front camera?
Regards
i have a new refurbed TyTN...looks immaculate but is unfortunately suffering from a hybrid brick (corrup CID, no KITL and SPL 1.09)
I have all accessories and original packaging if anyone wants to make me a good offer?? (PM me if you are interested)
should also point out that it has a qwertz keyboard
tytn (spv m3100)
hi guys..
i'm desperate..I can't hear any sound from my pda..I think that my audio hardware broke down..do you know where I can find any spare parts for this?thanx in advance..
first post^^
been looking for these for a long time now and i've never seen the actual 8525 housing at this site, only the tytn/dopod versions, but they're are now in stock!!
just a heads up b/c i read a while back a few people are looking for 8525 housing.
now my 8525 wont be battle-scarred and garish looking <.<;
http://cnn.cn/shop/8525-grey-housing-cingular-p-1852.html
two 8525 phone
i have two 8525 spare part phone. if interested pm me
spare parts for tytn/m3100
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
punkzilla2k said:
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
Click to expand...
Click to collapse
You can find spare parts and accessories here:
http://www.phoneystore.com
8525 front cover and Mail/Explorer rocker needed
Got the phone with these two dented and although it works okay, would like to replace them one day.... anyone have these parts for a few bucks? I can do PayPal real easy....
Thanks,
Ted
Dpad for Cingular 8500
I'm looking for the circuit board behind the dpad of a cingular 8500, if anyone has one left, pm me please.
I am looking for the little cover above the mirror on the back side of the device that is usually part of the battery cover or alternativly the entier battery cover.
If you have them please PM me.
Broken ATT 8525, Touch screen totaled
I was taking photos and drop it right on the face. I was using it as a iPod with a unregistered go phone sim card till I did a Master Reset and now it's a paper weight because I can't do the start up BS. Touch screen is totaled but the rest of the internal parts and battery are good, front cover don't look bad, back is great, have 2 stylus and a hard metal case for it too. PM me here and we'll work something out, Paypal OK. Vince
It's a paper weight to me, I'm not going to put money other than shipping is someone wants to send me a screen for the joy of it, if I fix it I'd just give it to my sister anyway. I'm happy with my Tilt and I'm ready to move on to the Fuse soon, thanks for the replies!!
I travel building Cellular sites a lot and I've been happy with my current Tilt ROM so I haven't logged on and seen all these replies till now. I Love HTC phones and the chefs that put the long hours and headacks into them, They get the big thumbs up from me! Thanks to all also that add and beta test too.
Also I live in the midwest in the US and BASE Jump my towers mostly, if anyone interested in jumping with me let me know and I'll let you know if I'm in the area, I got combo's!!! IF you want to Skydive I live in the Indianapolis area also. --> www.skycircus.com , My DZ 8 miles from home. I'm a Parachute rigger also.
Hebrew keyboard?
I have a TyTN II (T-Mobile UK Vario II) that I'm setting up for a friend in Israel; does anybody have or know where I can get hold of a keyboard with Hebrew lettering?
Thanks
Need a replacement motherboard (main) for HTC TYTN
Friends,
My HTC TyTN has problems with some connectors right on the main motherboard..... I would like to know if anyone has any spare HTC TyTN which is completely broken and can be usable for its spares......
Also, if any one is aware of any site where I can get the mani motherboard...it would be really helpful.
thanks
Milind
I am interested too in a motherboard of Tytn. I have problem that a connector (for a screen flex cable) on my motherboard is damaged. Is it possible to fix it (for example to change that connector with a new one)? Does anyone know how to do so? I really need help...
thanks in advance
Related
where can i get a black herme housing ?. I want to replace the boring gray housing that the 8525 came with.
Looking for the same thing!
Anyone with some suggestions?
i ordered this one...i'll let you know how it goes.
http://cnn.cn/shop/htc-8525-c-277_322.html
wratran said:
i ordered this one...i'll let you know how it goes.
http://cnn.cn/shop/htc-8525-c-277_322.html
Click to expand...
Click to collapse
Dont mean to bother, but just wondering if there has been any success? Im really interested in this mod.
wratran said:
i ordered this one...i'll let you know how it goes.
http://cnn.cn/shop/htc-8525-c-277_322.html
Click to expand...
Click to collapse
Have you tried it yet?
I just ordered a new Hermes Replacement housing from cnn.cn, however I haven't received it yet.
If you are ordering one just make sure you order the right one for your phone.
For instance, the TyTN replacement body will not work on a 8525 and vise versa...
invictive said:
For instance, the TyTN replacement body will not work on a 8525 and vise versa...
Click to expand...
Click to collapse
I was looking over the cnn.cn and from first looks, it seems like the 8525 OEM black housing will work with the TyTN phone.
Is it confirmed the two will not work with one another? They are the same identical phone but with out the front camera on the 8525. If anyone will or has tried let us know.
I haven't tried, but I doubt it would. If you compare the positions on the different buttons - you can see that it the buttons doesn't correspond on the two different models. I'll buy the housing for TYTN to be sure it fits.
Wonder if they supply a instruction manual with it... Anyone knows?
The 8525 case that cnn.cn has for sale shows a front camera hole but no video call button which is something I would prefer, but where do you get the d-pad from? For those looking for a disassembly of the hermes have a look here on the wiki.I think there could be a really good combination of part to make a really nice looking hermes.
Dangnabbit.
I just ordered that Black Housing, but didn't notice the lack of a video call button. I hope it wont matter during installation on my Xda version
I've replaced the housing on my Vario ii for that of an SPV M3100 with no problems whatsoever - it was really quite straightforward. I kept the t-mobile directional pad as I preferred the look of it.
Changing the housing on a model of hermes with a different layout however is not so straightforward as it involves not only changing the keypad itself but also the little pcb underneath which is slightly different between Herm models.
it is certainly possible to replace the slide mechanism, keyboard and backplate between ANY model of Hermes, and some nice combinations are possible. I have a vario ii orange backlit keyboard if anyone wants it.
chinaonnitrous1!
Let us know how it went
Thanks!
they carried 2 housing...the only different is the key pad layout...so pay attention to the key pad...
This company is very slow in responding to email. I send them 2 email about a week ago asking for shipping date...yet no respond
Thats interesting, I ordered something from them on thursday, I got an email withing hours saying it had shipped with a tracking number...
As for the keypad layout, if you wanted to use the Black case you would have to also find the keypad to match it, as well as the PCB that goes beneath. cnn.cn has the parts for the TyTN, but not the 8525.
Maybe someone with good dremel and case modding skills could make it look good though.
Does anyone actually have the Black HTC TyTN that they were supposedly shipping? I was going to get one, but then everyone convinced me not too, I'd be interested to see some pics though.
I'lll get the housing withhin a week.
I'll post pics and everything.
chinaonnitrous1 said:
I'lll get the housing withhin a week.
I'll post pics and everything.
Click to expand...
Click to collapse
Thanks mate!
chinaonnitrous1 any news on how it went ?
I bought from http://cnn.cn/shop a case for 8525 and the external keyboard because I have a SPV M3100. I am waiting for the package and I'll put some pictures of the case. I hope the quality of the case is ok.
I just received my new TyTN case from cnn.cn. It is a dopod branded case, slightly different colour than my original TyTN case. I guess I would call the colour "graphite".
It is definately an original case off of a phone, it still has the old IMEI and Serial Number on the sticker on the back.
Build quality is good, it doesn't look like it is off a used phone. One thing I noticed however was that the silver metal on the front was slightly pulled up, and there were some adhesive remnants on the side of the case. I'm sure it will clean up fine with a little solvent though.
I haven't replaced it yet, I am waiting on a new keypad circuit board (mine is fried, you have to push it ridiculously hard to get it to work), and I will open it up then and replace everything.
Ordering from CNN.CN was pretty good. Shipping was $5 CAD, and it took about a week and a half to arrive. A signature was required, but there were no fees or duty.
leoni1980 said:
it is certainly possible to replace the slide mechanism, keyboard and backplate between ANY model of Hermes, and some nice combinations are possible. I have a vario ii orange backlit keyboard if anyone wants it.
Click to expand...
Click to collapse
Hi, I'd be interested in the keypad, if it's still available? I've dropped my VarioII and the keypad is slightly bent lol
where did you get the replacement body from?
Cheers
Hi,
Has anyone purchased one of the HTC 8525 OEM housings from cnn.cn. If so what was the quality like and are they new housings? None of the re-branded TyTn's seem to use this housing so I'm wondering if they are manufacured specifically for, or by, cnn.cn?
Also, what are the service and delivery charges like from cnn.cn.
http://cnn.cn/shop/8525-full-housing-pi-198.html?osCsid=ee042fbf3e01db3c5bad7913ecdb4a44http://cnn.cn/shop/8525-full-housing-pi-198.html osCsid=ee042fbf3e01db3c5bad7913ecdb4a44
Thanks in advance.
I bought a blackberry case from them and it arrived in 8 days. Great service for 5 USD in my opinion.
I'm curious about that tytn housing unit too.
They have taken it down for some reason.
O was gonna try it.
sjbale said:
Hi,
Has anyone purchased one of the HTC 8525 OEM housings from cnn.cn. If so what was the quality like and are they new housings? None of the re-branded TyTn's seem to use this housing so I'm wondering if they are manufacured specifically for, or by, cnn.cn?
Also, what are the service and delivery charges like from cnn.cn.
http://cnn.cn/shop/8525-full-housing-pi-198.html?osCsid=ee042fbf3e01db3c5bad7913ecdb4a44http://cnn.cn/shop/8525-full-housing-pi-198.html osCsid=ee042fbf3e01db3c5bad7913ecdb4a44
Thanks in advance.
Click to expand...
Click to collapse
Dude you got a TyTN or an 8525?Because are very different..
I havent heard many bad things about them, havent used them personally yet
8525 Housing
I might as well just add to this thread
You guys think this is worth a shot? The last owner of my phone jacked up a couple parts of the current housing.
http://cgi.ebay.com/HTC-Magician-qt...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
g35driver said:
I might as well just add to this thread
You guys think this is worth a shot? The last owner of my phone jacked up a couple parts of the current housing.
http://cgi.ebay.com/HTC-Magician-qt...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
That'd look great on the 8525. You may want to check this out for a step-by-step guide.
http://www.howardforums.com/showthread.php?t=1152710&page=1&pp=15
Judging by it's looks, it only works with Hern100 devices (8525, m3100, etc) and wont work with the TyTN. (herm200)
I could be wrong though.
The D-Pad layout is a bit different, but if you get the D-Pad
http://cnn.cn/shop/cingular-8525htc-hermes-outside-keypad-p-1610.html
and what goes under the D-Pad, you might be able to get it to work.
But that's kind of not worth the effort though.
I am yet to find a stylish housing for my tytn. It's all scratched out but I hate that Dopod housing.
Since there is no flipping way, HTC is going to make the original housing available to anyone, it would have been nice if someone came out with a more stylish design.
g35driver said:
I might as well just add to this thread
You guys think this is worth a shot? The last owner of my phone jacked up a couple parts of the current housing.
http://cgi.ebay.com/HTC-Magician-qt...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I'd love to pick up an all black housing like that but it has one thing that keeps me from doing it.. the front facing camera hole. since i have an 8525.. it would just be an open hole on the front of my phone which would look dumb and get lots of dust inside.
g35driver said:
I might as well just add to this thread
You guys think this is worth a shot? The last owner of my phone jacked up a couple parts of the current housing.
http://cgi.ebay.com/HTC-Magician-qt...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I have one on the way..
is it really hard to get the original HTC grey version? I've seen loads of the dopod versions, some with some without the video button.
http://cgi.ebay.co.uk/ws/eBayISAPI....m=290143857315&ssPageName=STRK:MEWA:IT&ih=019
is htc but dont know if button configuration is right for hermes 200 (Anyone confirm this?) does that have video button??
http://cgi.ebay.co.uk/ws/eBayISAPI....PageName=STRK:MEWA:IT&ih=015#ebayphotohosting
Its the closest one ive seen to mine but branded CHT DOPOD
Ive seen people ask htc to replace it but had no sucess. Its really annoying considering we all dont keep the phones forever and selling them off is harder when you cant get the original housing replaced.
that black htc housing DOES have the video button but the layout is different than the herm200.
the red hangup button and the green phone button are not on the right place on that case.
I have taken my tytn apart. What goes under the D-Pad in herme200 looks different than the ones in herm100. Even if you did get that case and the right d-pad, your buttons wont fall on the right spot. therefore the phone button and the hangup button wont work.
I wonder if HTC repair center would replace the housing.
check this post
http://forum.xda-developers.com/showthread.php?t=323520
Need help!!!
Smashed my LCD and orded a replacement from HK. The part number they sent me was 60H00037-00M. After installing it, all I get is a white screen. Sent it back and recieved another one with the same number and again the same deal!!!
The part number Im chasing is 60H00056-00m or TX0704APAA1. I think it is a mfg by Hitachi.
I cant find anything with this part number on the net and was wondering if anyone knows if there is an equivalent that could be used insted.
Mal..
Are you sure that your connections are secure and lined up properly? I replaced the screen on my 8525 and the ribbon cable was not connected properly the first go round. It is the one with the tiny screws.
teknics said:
Are you sure that your connections are secure and lined up properly? I replaced the screen on my 8525 and the ribbon cable was not connected properly the first go round. It is the one with the tiny screws.
Click to expand...
Click to collapse
Teknics, are yoy refering to the two incy wincy screws that fasten the ribbon to the d-pad at the bottom?
Mal..
Yes that cable, but also make sure the ribbon cable that slides into the locking connector on the main board is in properly also.
HK?????
hi all
i have been looking for a replacement rear speaker and a front facing camera for my phone and so far the only leads i have been able to get is to look on ebay for someone selling their damaged phone for parts. you mentioned a HK in your first post is that a place to buy Hermes spare parts and if so is there a minimum amount that you have to buy?
sllabymkcus said:
hi all
i have been looking for a replacement rear speaker and a front facing camera for my phone and so far the only leads i have been able to get is to look on ebay for someone selling their damaged phone for parts. you mentioned a HK in your first post is that a place to buy Hermes spare parts and if so is there a minimum amount that you have to buy?
Click to expand...
Click to collapse
HK refers to Hong Kong you can purchase screens and digitizers that i know of but as far as small inexpinsive electronics i think your sol. just out of curiousity did you manage to blow the speakers or what? i have played some pretty loud music through my hermes using mortplayer and have not managed to blow them yet.
I have 60H00056-00m or TX0704APAA1 LCD.
msn:[email protected]
I am looking for a TX0704APAA1 for my HTC Tytn.
Apparantly this is the Hitachi model other models are also available on ebay (Samsung and Toppoly). As I understand Samsung and Toppoly are not compatible with one another apparently they use different controllers.
As for the Hitachi I have know idea whether it is compatible with Samsung or Toppoly, which is why I am on my quest after the Hitachi...
Anyone know where I can get one?
I think this one might work.
http://cnn.cn/shop/8525tytn-screen-p-1704.html?osCsid=37d6ea546d0b93a035876bf59f229d3b
The 60h00032 or 60h00037 did not work on my dopod 838 pro.. I just got a white screen.
Ok, so as the title suggests, i'm looking at replacing the housing of my vario (cause its scratched to hell - keys in pockets, and the odd drop )
After looking at http://cnn.cn/shop/8525-blacksilver-full-housing-p-198.html was wondering whether these were suitable for straight swap? as obviously the keypads are different between the herm100/200/300 but i'd keep the original in as its in good condition, and wouldnt mean i'd need to swap the pcb underneath either?
Or am I barking up the completely wrong tree so to speak?
Any help appreciated...especially for you Vario owners who have changed their housings...any problems you came across etc.
Cheers!
bump surely someone must have done this already?? all these reads, and no replies
SEARCH THE FORUMS BEFORE POSTING THREADS
kthxbye =p
i've already searched....n yeh it mentions swapping with an orange 3100 housing...but thats something i'd haveto find on ebay etc...doesnt mention the 8525 housing on cnn..... so was wondering if the keypad fits or not, as the front faceplate is scratched to hell so would need to swap the whole casing...not just the middle/rear panels.
Try this: http://cgi.ebay.co.uk/OEM-Housing-f...oryZ3728QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Cheers for the link Paul. That listing seems to claim that you can replace a vario with that housing, so might aswell just bite the bullet and go for it I'll probably look at getting it from CNN still, as they will work out slightly cheaper (~£32 compared to ~£45)
marcparker said:
replace a vario with that housing
Click to expand...
Click to collapse
Vario II to be more precise. The Vario is a HTC Wizard.
Any success with replacing? Is it hard to do? I have some scratches myself, and would like to change the housing. Have a TYTN
I havnt had chance to order the new housing yet, as i was skint until payday I'm going to hopefully get it ordered within the next couple of days.... I'll keep you posted on how it goes!
Still no one with experiences?
On this site there is a GPS antena available for TyTn... can we then enable GPS on the TyTn??
http://cnn.cn/shop/8525tytnhermes-antenna-p-1615.html
I've seen an HTC Hermes Case on this site:
http://www.cellphonepartszone.com/Products.asp?shopxpbe_id=64&id=281
but it's not completely clear to me on how to order and pay... (i'm Italian)
Hope this will be useful and you'll understand how to order the case...
Still no one with experiences on changing the housing?
Sei semplicemente un grande..la cover originale è impossibile da trovare!!
However no succesfully experience to swap the housing because in order to be able to change them (Cingular/HTC 8525 and also from Orange but i can't remember the name) with a TyTN, because the internal keypad membrane of the buttons at the top of the phone are (hope for now) impossible to find anywhere. I'm still looking for..
Churchill said:
On this site there is a GPS antena available for TyTn... can we then enable GPS on the TyTn??
http://cnn.cn/shop/8525tytnhermes-antenna-p-1615.html
Click to expand...
Click to collapse
I think enabling GPS is a little more complex than that - there were some required connections on the chipset that are not connected - try searching this forum...
Before post remember the topic of the thread: HOUSING
not gps
After I had changed the housing the screen doesn´t change into landscape mode
Hi!
After I had changed the housing the landscape mode isn´t activate itself while openning the keyboard. It did only once. It seems like the problem is of physical matter but I checket out all again and it seems to be all as it was. I don´t have another complains about functionality.
For those who wants to change the housing I have to say that that takes alot of time. And before you will waist money for a new housing make the following steps:
1. Look a this one verry carefully and be sure you have all tools you need.
ftp://ftp.xda-developers.com/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf
2. Think that you will need some stuff that you will put between new housing and touchscreen. (I took the old one but it isn´t a good idea).
3. You will need some glue to glue the old parts to the new housing (obviously the housing is more than just this plastic case).
If somone could give me an good advice related to the screenmode while opening I will aprecciate that.
ecor said:
Hi!
After I had changed the housing the landscape mode isn´t activate itself while openning the keyboard. It did only once. It seems like the problem is of physical matter but I checket out all again and it seems to be all as it was. I don´t have another complains about functionality.
For those who wants to change the housing I have to say that that takes alot of time. And before you will waist money for a new housing make the following steps:
1. Look a this one verry carefully and be sure you have all tools you need.
ftp://ftp.xda-developers.com/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf
2. Think that you will need some stuff that you will put between new housing and touchscreen. (I took the old one but it isn´t a good idea).
3. You will need some glue to glue the old parts to the new housing (obviously the housing is more than just this plastic case).
If somone could give me an good advice related to the screenmode while opening I will aprecciate that.
Click to expand...
Click to collapse
Your device does not rotate anymore because you have not moved the magnet from the old casing to the new one. The magnet operates the rotate switch. See here:
http://forum.xda-developers.com/showthread.php?p=2686388
Mike
Oh and you gave a link to the Wizard Manual, but you can get one for the Hermes here www.mikechannon.net
Hi everyone,
I would like to replace the following parts on my GSM Hero: Housing (scratches/dents), Trackball (up & left not working), Front Speaker (distorted), and Digitizer Touchscreen (minor scratches).
Does anyone know of any good suppliers for these parts? So far I have only been able to find suppliers for the CDMA Hero and a supplier that requires a minimum of 5 parts per order.
The trackball and the front speaker are particularly annoying to use and they are my first priority to replace, the other parts are just cosmetic butI figured if I was taking the phone apart I might as well do it all at once.
Any help would be greatly appreciated. Thanks.
P.S. I'm located in Canada.
hi, your trackball might not be broken...it might just have dirt in it. my trckball does that sometimes all you gotta do is spin it around a bit
you can get digitisers from ebay
Thanks for the quick reply! I spun it around for a bit and now it works in all directions! Now, the next most irritating thing on my list is the front speaker...crackles a bit during conversations.
Hi this website quite a few replacement parts of it.
http://www.globaldirectparts.com/HTC-Hero-Replacement-Repair-Parts-s/5502.htm
buying all that stuff might be as expensive as buying a new hero. The hero's price has fallen -50% since it came out. I'd consider buying a new one.
anaschillin said:
Hi this website quite a few replacement parts of it.
globaldirectparts.../HTC-Hero-Replacement-Repair-Parts-s/5502.htm
Click to expand...
Click to collapse
That was the site that I previously found but, you have to buy in bulk. The minimum order of trackballs is 5 and the minimum order of the housing is 2. It quickly adds up, maybe what I should do is start a Hero repair specialty shop