Ok, so as the title suggests, i'm looking at replacing the housing of my vario (cause its scratched to hell - keys in pockets, and the odd drop )
After looking at http://cnn.cn/shop/8525-blacksilver-full-housing-p-198.html was wondering whether these were suitable for straight swap? as obviously the keypads are different between the herm100/200/300 but i'd keep the original in as its in good condition, and wouldnt mean i'd need to swap the pcb underneath either?
Or am I barking up the completely wrong tree so to speak?
Any help appreciated...especially for you Vario owners who have changed their housings...any problems you came across etc.
Cheers!
bump surely someone must have done this already?? all these reads, and no replies
SEARCH THE FORUMS BEFORE POSTING THREADS
kthxbye =p
i've already searched....n yeh it mentions swapping with an orange 3100 housing...but thats something i'd haveto find on ebay etc...doesnt mention the 8525 housing on cnn..... so was wondering if the keypad fits or not, as the front faceplate is scratched to hell so would need to swap the whole casing...not just the middle/rear panels.
Try this: http://cgi.ebay.co.uk/OEM-Housing-f...oryZ3728QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Cheers for the link Paul. That listing seems to claim that you can replace a vario with that housing, so might aswell just bite the bullet and go for it I'll probably look at getting it from CNN still, as they will work out slightly cheaper (~£32 compared to ~£45)
marcparker said:
replace a vario with that housing
Click to expand...
Click to collapse
Vario II to be more precise. The Vario is a HTC Wizard.
Any success with replacing? Is it hard to do? I have some scratches myself, and would like to change the housing. Have a TYTN
I havnt had chance to order the new housing yet, as i was skint until payday I'm going to hopefully get it ordered within the next couple of days.... I'll keep you posted on how it goes!
Still no one with experiences?
On this site there is a GPS antena available for TyTn... can we then enable GPS on the TyTn??
http://cnn.cn/shop/8525tytnhermes-antenna-p-1615.html
I've seen an HTC Hermes Case on this site:
http://www.cellphonepartszone.com/Products.asp?shopxpbe_id=64&id=281
but it's not completely clear to me on how to order and pay... (i'm Italian)
Hope this will be useful and you'll understand how to order the case...
Still no one with experiences on changing the housing?
Sei semplicemente un grande..la cover originale è impossibile da trovare!!
However no succesfully experience to swap the housing because in order to be able to change them (Cingular/HTC 8525 and also from Orange but i can't remember the name) with a TyTN, because the internal keypad membrane of the buttons at the top of the phone are (hope for now) impossible to find anywhere. I'm still looking for..
Churchill said:
On this site there is a GPS antena available for TyTn... can we then enable GPS on the TyTn??
http://cnn.cn/shop/8525tytnhermes-antenna-p-1615.html
Click to expand...
Click to collapse
I think enabling GPS is a little more complex than that - there were some required connections on the chipset that are not connected - try searching this forum...
Before post remember the topic of the thread: HOUSING
not gps
After I had changed the housing the screen doesn´t change into landscape mode
Hi!
After I had changed the housing the landscape mode isn´t activate itself while openning the keyboard. It did only once. It seems like the problem is of physical matter but I checket out all again and it seems to be all as it was. I don´t have another complains about functionality.
For those who wants to change the housing I have to say that that takes alot of time. And before you will waist money for a new housing make the following steps:
1. Look a this one verry carefully and be sure you have all tools you need.
ftp://ftp.xda-developers.com/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf
2. Think that you will need some stuff that you will put between new housing and touchscreen. (I took the old one but it isn´t a good idea).
3. You will need some glue to glue the old parts to the new housing (obviously the housing is more than just this plastic case).
If somone could give me an good advice related to the screenmode while opening I will aprecciate that.
ecor said:
Hi!
After I had changed the housing the landscape mode isn´t activate itself while openning the keyboard. It did only once. It seems like the problem is of physical matter but I checket out all again and it seems to be all as it was. I don´t have another complains about functionality.
For those who wants to change the housing I have to say that that takes alot of time. And before you will waist money for a new housing make the following steps:
1. Look a this one verry carefully and be sure you have all tools you need.
ftp://ftp.xda-developers.com/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf
2. Think that you will need some stuff that you will put between new housing and touchscreen. (I took the old one but it isn´t a good idea).
3. You will need some glue to glue the old parts to the new housing (obviously the housing is more than just this plastic case).
If somone could give me an good advice related to the screenmode while opening I will aprecciate that.
Click to expand...
Click to collapse
Your device does not rotate anymore because you have not moved the magnet from the old casing to the new one. The magnet operates the rotate switch. See here:
http://forum.xda-developers.com/showthread.php?p=2686388
Mike
Oh and you gave a link to the Wizard Manual, but you can get one for the Hermes here www.mikechannon.net
Related
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
They have a Dopod housing here for $53 US
http://cnn.cn/shop/htc-c-277.html
I'm looking for a LCD hehe
EDIT: ended up getting http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260108396462&ssPageName=ADME:B:EOIBSA:AU:11
Comes with instructions and the LCD and a tool kit.
sjbale said:
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
Click to expand...
Click to collapse
Anyone know of any UK suppliers of parts?
Softbank 2MP Camera Part
I am looking for a camera replacement part for my Softbank. I was the part that caused my Softbank to display totally WHITE SCREEN.
Here is the story:
Last five months I accidentally dropped my Hermes on the floor carpet and when I turned it on, it displayed all WHITE SCREEN. I tot the LCD screen was the culprit and bought some LCD for replacement from eBay. I dismantled everything and tried to replace the LCD but it resulted the same WHITE SCREEN. Then I dismantled the Jog Dial and the Camera and reattached part by part. The jog dial caused no problem but the Camera showed positive result on WHITE SCREEN behavior. Now I dismantled the Camera and my SOftbank X01HT works like a charm... Well almost like a charm with no 2MP Camera... LOL...
So I am looking for the part also to put it back on my TyTn...
Hi guys,
Do you know where can I get the TyTN VGA front camera?
Regards
i have a new refurbed TyTN...looks immaculate but is unfortunately suffering from a hybrid brick (corrup CID, no KITL and SPL 1.09)
I have all accessories and original packaging if anyone wants to make me a good offer?? (PM me if you are interested)
should also point out that it has a qwertz keyboard
tytn (spv m3100)
hi guys..
i'm desperate..I can't hear any sound from my pda..I think that my audio hardware broke down..do you know where I can find any spare parts for this?thanx in advance..
first post^^
been looking for these for a long time now and i've never seen the actual 8525 housing at this site, only the tytn/dopod versions, but they're are now in stock!!
just a heads up b/c i read a while back a few people are looking for 8525 housing.
now my 8525 wont be battle-scarred and garish looking <.<;
http://cnn.cn/shop/8525-grey-housing-cingular-p-1852.html
two 8525 phone
i have two 8525 spare part phone. if interested pm me
spare parts for tytn/m3100
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
punkzilla2k said:
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
Click to expand...
Click to collapse
You can find spare parts and accessories here:
http://www.phoneystore.com
8525 front cover and Mail/Explorer rocker needed
Got the phone with these two dented and although it works okay, would like to replace them one day.... anyone have these parts for a few bucks? I can do PayPal real easy....
Thanks,
Ted
Dpad for Cingular 8500
I'm looking for the circuit board behind the dpad of a cingular 8500, if anyone has one left, pm me please.
I am looking for the little cover above the mirror on the back side of the device that is usually part of the battery cover or alternativly the entier battery cover.
If you have them please PM me.
Broken ATT 8525, Touch screen totaled
I was taking photos and drop it right on the face. I was using it as a iPod with a unregistered go phone sim card till I did a Master Reset and now it's a paper weight because I can't do the start up BS. Touch screen is totaled but the rest of the internal parts and battery are good, front cover don't look bad, back is great, have 2 stylus and a hard metal case for it too. PM me here and we'll work something out, Paypal OK. Vince
It's a paper weight to me, I'm not going to put money other than shipping is someone wants to send me a screen for the joy of it, if I fix it I'd just give it to my sister anyway. I'm happy with my Tilt and I'm ready to move on to the Fuse soon, thanks for the replies!!
I travel building Cellular sites a lot and I've been happy with my current Tilt ROM so I haven't logged on and seen all these replies till now. I Love HTC phones and the chefs that put the long hours and headacks into them, They get the big thumbs up from me! Thanks to all also that add and beta test too.
Also I live in the midwest in the US and BASE Jump my towers mostly, if anyone interested in jumping with me let me know and I'll let you know if I'm in the area, I got combo's!!! IF you want to Skydive I live in the Indianapolis area also. --> www.skycircus.com , My DZ 8 miles from home. I'm a Parachute rigger also.
Hebrew keyboard?
I have a TyTN II (T-Mobile UK Vario II) that I'm setting up for a friend in Israel; does anybody have or know where I can get hold of a keyboard with Hebrew lettering?
Thanks
Need a replacement motherboard (main) for HTC TYTN
Friends,
My HTC TyTN has problems with some connectors right on the main motherboard..... I would like to know if anyone has any spare HTC TyTN which is completely broken and can be usable for its spares......
Also, if any one is aware of any site where I can get the mani motherboard...it would be really helpful.
thanks
Milind
I am interested too in a motherboard of Tytn. I have problem that a connector (for a screen flex cable) on my motherboard is damaged. Is it possible to fix it (for example to change that connector with a new one)? Does anyone know how to do so? I really need help...
thanks in advance
Hi,
Has anyone purchased one of the HTC 8525 OEM housings from cnn.cn. If so what was the quality like and are they new housings? None of the re-branded TyTn's seem to use this housing so I'm wondering if they are manufacured specifically for, or by, cnn.cn?
Also, what are the service and delivery charges like from cnn.cn.
http://cnn.cn/shop/8525-full-housing-pi-198.html?osCsid=ee042fbf3e01db3c5bad7913ecdb4a44http://cnn.cn/shop/8525-full-housing-pi-198.html osCsid=ee042fbf3e01db3c5bad7913ecdb4a44
Thanks in advance.
I bought a blackberry case from them and it arrived in 8 days. Great service for 5 USD in my opinion.
I'm curious about that tytn housing unit too.
They have taken it down for some reason.
O was gonna try it.
sjbale said:
Hi,
Has anyone purchased one of the HTC 8525 OEM housings from cnn.cn. If so what was the quality like and are they new housings? None of the re-branded TyTn's seem to use this housing so I'm wondering if they are manufacured specifically for, or by, cnn.cn?
Also, what are the service and delivery charges like from cnn.cn.
http://cnn.cn/shop/8525-full-housing-pi-198.html?osCsid=ee042fbf3e01db3c5bad7913ecdb4a44http://cnn.cn/shop/8525-full-housing-pi-198.html osCsid=ee042fbf3e01db3c5bad7913ecdb4a44
Thanks in advance.
Click to expand...
Click to collapse
Dude you got a TyTN or an 8525?Because are very different..
I havent heard many bad things about them, havent used them personally yet
8525 Housing
I might as well just add to this thread
You guys think this is worth a shot? The last owner of my phone jacked up a couple parts of the current housing.
http://cgi.ebay.com/HTC-Magician-qt...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
g35driver said:
I might as well just add to this thread
You guys think this is worth a shot? The last owner of my phone jacked up a couple parts of the current housing.
http://cgi.ebay.com/HTC-Magician-qt...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
That'd look great on the 8525. You may want to check this out for a step-by-step guide.
http://www.howardforums.com/showthread.php?t=1152710&page=1&pp=15
Judging by it's looks, it only works with Hern100 devices (8525, m3100, etc) and wont work with the TyTN. (herm200)
I could be wrong though.
The D-Pad layout is a bit different, but if you get the D-Pad
http://cnn.cn/shop/cingular-8525htc-hermes-outside-keypad-p-1610.html
and what goes under the D-Pad, you might be able to get it to work.
But that's kind of not worth the effort though.
I am yet to find a stylish housing for my tytn. It's all scratched out but I hate that Dopod housing.
Since there is no flipping way, HTC is going to make the original housing available to anyone, it would have been nice if someone came out with a more stylish design.
g35driver said:
I might as well just add to this thread
You guys think this is worth a shot? The last owner of my phone jacked up a couple parts of the current housing.
http://cgi.ebay.com/HTC-Magician-qt...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I'd love to pick up an all black housing like that but it has one thing that keeps me from doing it.. the front facing camera hole. since i have an 8525.. it would just be an open hole on the front of my phone which would look dumb and get lots of dust inside.
g35driver said:
I might as well just add to this thread
You guys think this is worth a shot? The last owner of my phone jacked up a couple parts of the current housing.
http://cgi.ebay.com/HTC-Magician-qt...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I have one on the way..
is it really hard to get the original HTC grey version? I've seen loads of the dopod versions, some with some without the video button.
http://cgi.ebay.co.uk/ws/eBayISAPI....m=290143857315&ssPageName=STRK:MEWA:IT&ih=019
is htc but dont know if button configuration is right for hermes 200 (Anyone confirm this?) does that have video button??
http://cgi.ebay.co.uk/ws/eBayISAPI....PageName=STRK:MEWA:IT&ih=015#ebayphotohosting
Its the closest one ive seen to mine but branded CHT DOPOD
Ive seen people ask htc to replace it but had no sucess. Its really annoying considering we all dont keep the phones forever and selling them off is harder when you cant get the original housing replaced.
that black htc housing DOES have the video button but the layout is different than the herm200.
the red hangup button and the green phone button are not on the right place on that case.
I have taken my tytn apart. What goes under the D-Pad in herme200 looks different than the ones in herm100. Even if you did get that case and the right d-pad, your buttons wont fall on the right spot. therefore the phone button and the hangup button wont work.
I wonder if HTC repair center would replace the housing.
check this post
http://forum.xda-developers.com/showthread.php?t=323520
Hi, xda... I am a quiet user here, but i love your forum... it's like godlike for me, but now to the point!
So i got a HTC TyTn HERM200 and i used it for one year, so i figured that i cud buy it a new housing because its old housing looks simply used out! So i downloaded the HTC TyTn service manual to see how to change the housing perfectly right! So i did! I changed the housing perfectly i didn't miss a thing!
BUT... obviously i did...
Now wen i slide the keyboard open, the screen wont rotate anymore! I am desperate, cuz i tried everything.
Maybe some of you who changed the housing before me can help me out, give me a hint or something...
I DID READ the WIKI... there was nothing about my problem, please, please... HELP ME...
Sorry... Sorry... Sorry... PROBLEM SOLVED... But...
The HTC Service manual didn't include that info ... Oh... i am so happy...!!! Thanks anyway...
what did you do???
When i changed the housing i didn't see the micro little magnet that was on the old housing, that you must replace from the old to the new one... it is a tiny little magnet!!! But i found it, it was on the back cover inside of the LCD part of the phone (or PDA/PPC)...
it was really hard to locate it, but i found it! SUPERB... now i can live happy with my new look old Hermes, a smooth black housing that i got on ebay...!!!
mark wild said:
When i changed the housing i didn't see the micro little magnet that was on the old housing, that you must replace from the old to the new one... it is a tiny little magnet!!! But i found it, it was on the back cover inside of the LCD part of the phone (or PDA/PPC)...
it was really hard to locate it, but i found it! SUPERB... now i can live happy with my new look old Hermes, a smooth black housing that i got on ebay...!!!
Click to expand...
Click to collapse
Remember to search, it can save a lot of hassles!! (Oh and don't be naughty with the double posting)
Amongst other posts on this subject is this one. I post a link for anyone else who comes across this thread:
http://forum.xda-developers.com/showpost.php?p=2677085&postcount=3
Mike
Just saw this on ebay...Im a fan of housing and facia. But i know %98 of TP2 owner right now dont wanna touch the Hardware section of the phone.( for customizing)
It Just nice too see that we can tweak not only whats inside but also the outside too... Im just hoping for a nice fit and high quality. Its too early to tell how good this housing is but i wanna know soon.
http://cgi.ebay.co.uk/ORIGINAL-HTC-...s_JN?hash=item4cea1e075a&_trksid=p3286.c0.m14
I also noticed that a couple days ago but they only offer red and blue right now. I'm not savy enough but I think it's a cool options
For that, did you know how to dismount the TP2 ?
Looks like not really easy to operate at first glance...
You get a screwdriver with it ... just find all the screws and replace!
wait few months... dismantling this phone will be on youtube!
I noticed those when I bought my TP2 last week... to bad they are only red and blue. I would be down for black, or maybe a nice dark green. They look nice from the photo. I don't like taking apart slider phones... PITA
The Wing wasn't so bad. I did the whole thing solo since my brother broke his screen and there weren't any dismantling guides available yet. It's easier than you think... just don't force anything and keep a sharp eye open for screws.
The only problem with swapping the case for a T-Mobile version is that you have to keep the T-Mobile keyboard. The layout is unique to T-Mobile and the HTC version (as well as other carriers) vary from model to model.
freakingwilly said:
The Wing wasn't so bad. I did the whole thing solo since my brother broke his screen and there weren't any dismantling guides available yet. It's easier than you think... just don't force anything and keep a sharp eye open for screws.
The only problem with swapping the case for a T-Mobile version is that you have to keep the T-Mobile keyboard. The layout is unique to T-Mobile and the HTC version (as well as other carriers) vary from model to model.
Click to expand...
Click to collapse
It's really easy to swap cases. I had to replace the screen on my room mates Kaiser which is a slider tilt screen device as well. Took me 40 mins tops & I had to completely disassemble it. Will probably have to again soon. He broke his screen a second time lmao. The one thing I'll note though is for T-Mobile, the whole device is different basicly. The screen does have a tappered edge & the screen cover is bigger & the battery cover is a completely different design. the Stylus doesn't go through it. So, the T-Mobile wouldn't be completely changible. As for the keyboard, that can be changed via ROM. The HTC Kaiser has a different KB Layout than the AT&T Tilt, we just install a CAB to "fix" this as the ROM's are made for the HTC version. Also, the Sprint/Verizon/AT&T(From what I read) have Headphone Jacks. You could arguably use only part of the kit, but for $80-100+, I want one completely compatible with my device.
As for Colors, there's a full silver/full black/& black & orange version available. I wish they made them available in pieces so you could mix & match parts. For example the Battery covers.
Anyone knows whether a housing is available for the european version? Mine has some ugly scratches due to close contact with the asphalt Can't find a new housing though, only bezels... I need a new grey edge around the keyboard to which the battery cover is attached aswel. Is this even possible?
Luckily, the keyboard, screen and batt cover are still intact, and the phone is still functioning properly. It is now protected by a plastic rubberized case and a screenprotector.
Help would be very welcome!
I'm thinking about giving this a try to replace the screwed up button layout that ATT provided. If I can just swap the buttons and the remap the keys with a cab file I'm thinking I can get the QWERTY keyboard back to it's original form.
Anyone else tried this?
Jon
Tried going to the link but it appears to have been "removed".....anywhere else?
This one is working for me.
http://cgi.ebay.com/HTC-TOUCH-PRO-2-T7373-OEM-RED-FULL-HOUSING-KEYBOARD-US_W0QQitemZ350292809157QQcmdZViewItemQQptZPDA_Accessories?hash=item518f1415c5
Lets focus on getting everyone behind this one thread - maybe we can get someone to confirm! Thanks! http://forum.xda-developers.com/showthread.php?t=547632&page=4
Schmurtz1968 said:
For that, did you know how to dismount the TP2 ?
Looks like not really easy to operate at first glance...
Click to expand...
Click to collapse
Dismantling HTC Touch PRO2, HTC Rhodium in pictures...
The above dismantling link has been in the XDA-Wiki for several months now.
So what? If someone asks a question and I can help, I sure will. Or should I be an smartass and tell it's around here, use the search... Maybe it's your thing, not mine.
i'd like to try to replace the bezel on the screen-part, it's got little wholes and even a completely crushed section.. but according to the link you'll have to disassemble the whole keyboard-part in order to do that.. isnt there an easier way to replace the bezel??
just wanted to let everyone know that I have the black/blue case from ebay china. It took 3 weeks but I finally have it.
After taking apart my g1 and 90% housing conversion from white to black. I accidentally cut one of the ribbons off and broke the phone. So im a little scared to take apart this $400 phone. Didnt mind the g1 because there dirt cheap and easy to find another one.
If you all can gather some links and any guides I will probably convert my tmo tp2 to the new housing sunday mourning. unless someone can confirm that its extremly easy to switch housing.
Just an example of the g1 dissemble.
http://www.youtube.com/watch?v=3PdhXx3g9nU
ive been modding hardware since everyone had a nextel i730. ive seen alot of crappy poorly made housings in my days. usually the first and second generation batches of housings that come out are poorly cut, or made of brittle plastics. i would advise that when looking for housings(especially for expensive devices), that you get a 3rd generation housing and look on youtube for directions.
So excited.
I am trying to covert my T-mobile touch pro 2 soon. The full housing will arrive in 2 days. I dropped my precious on the pavement.... T-mobile housing is nowhere to be found so I bit the nail. Hopefull it's going to turn out awesome
Check this one for taking apart. flickr.com/photos/[email protected]/sets/72157621828152091/
Does the innards from the T-Mobile version of the TD2 fit in the original Diamond2 housing.
Its something I'm thinking of doing...and would like to know if its been done or possible at all.
That would be an interesting project, hope you try it out. They only thing that I could think of not fitting is the speaker, which on the MDA is on the side of the device.
EDIT: Scratch that, the MDA also is on the side. It looks like it could work, but the only porblem looks to be the bottom of the phone, which is much curvier
You will need to purchase a touch screen digitizer if you try this. It is attached to the housing and impossible to remove without damage. Also, when removing the digitizer and other ribbon cables, remember to slide the little black peice slightly to remove it. Very tricky, but I have completely taken the topaz apart numerous times. P.M. me if you run into any snags..... although I don't recommend trying the switch unless you have experience in electronics. Good Luck!
tomtommy306 said:
You will need to purchase a touch screen digitizer if you try this. It is attached to the housing and impossible to remove without damage. Also, when removing the digitizer and other ribbon cables, remember to slide the little black peice slightly to remove it. Very tricky, but I have completely taken the topaz apart numerous times. P.M. me if you run into any snags..... although I don't recommend trying the switch unless you have experience in electronics. Good Luck!
Click to expand...
Click to collapse
I don't have experience! But its never held me back before. At the moment I'm having problems locating a full housing including the front and side buttons..the only housing I can find are without buttons....I was thinking of buying a dummy for the buttons...don't know if thats viable.
Be sure to tell us how it went, and any special steps/problems you encounter.
Although, it really does look more like a cheap LG phone than a Nokia, except for maybe the 5800.
pistonripper said:
I don't have experience! But its never held me back before. At the moment I'm having problems locating a full housing including the front and side buttons..the only housing I can find are without buttons....I was thinking of buying a dummy for the buttons...don't know if thats viable.
Click to expand...
Click to collapse
Ebay! Or try CNN.CN for a more expensive approach.
They even sell a full black housing with the matt black if you want to be different.
http://cnn.cn/shop/t5353-touch-diamond2-topaz-c-277_829.html
CNN.Cn doesn't have the buttons included either
i too want to try it, but encountered the problem of the buttons... No housing is sold with the buttons. For the rest i can't see any difficulties, the Inside of the Compact V and the Topaz should be the same, i mean, will HTC manifacture a complete new phone just for T-mobile? I think just the housing is different.
When i find a way, i'll contact you!
I found one supplier....they include the front buttons but do not include the volume or power buttons
http://www.truesupplier.com/original-full-housing-cover-for-htc-touch-diamond-2-pr-18539.html
EDIT: Sorry it does include all the buttons as well as the front keys.....so ordered everything ...just waiting now
Topaz Antenna
does anyone know where I can I get the topaz antenna from ?
Received my casing today....but need the antenna.....the Compact V antenna is integrated into lower back of the casing as one piece....so its of no use
Dang, that sucks, I have searched for the antenna before, but haven't found any. Maybe try a broken TD2 on ebay or something. Other than that I have no idea
cmstackar said:
Dang, that sucks, I have searched for the antenna before, but haven't found any. Maybe try a broken TD2 on ebay or something. Other than that I have no idea
Click to expand...
Click to collapse
Well thats the only missing piece in the jigsaw.....so if/when I get it I will update the thread....in the mean time, if anyone knows where I can get this or make one up....its looks all plastic with 2 connectors...the connectors I have.