Hello guys, I tried to upgrade on my XDA ( Qtek 1010 ) from Pocket PC 2002 to 2003 for some reason it installed but on the boot up of 2003 it just stops and doesn't go farther.
I'm trying to flash it and I got one problem, I cannot put the wallaby patch on my MMC card with XDAarit.
I wanted to know, do you have to use SD card for that because only SD can contain keys ( Headers ) ?
If yes I hope I get an SD card tomorrow and hopefully fix it.
Related
As a result of a car accident I lost the ability to connect my Himalaya using the USB cradle. The data port on the phones board was completely smashed. I had it repaired only to allow my xdaII to recharge from it's power adapter but not from the cradle, that's how I lost all usb functionality.
Now I've previously read some methods and instructions on how to upgrade the xdaII using some modified rom files which are then stored on a SD-Card and then installed from the bootloader without the use of a USB connection.
Can anyone here tell me exactly how this is done ? What are the steps needed to convert the available rom files on this site to a format that would work from the sd-card ? I would also like to know, whether this method supports upgrading the radio and the extended rom in addition to the windows rom ?
Your help and assistance on this matter will be highly appreciated. As I can no longer upgrade my phone using the usb method. I will be depending on your help you guys. I've got faith in u, so don't let me down.
I also want to know it! Please help!!
Find another xda2 that has a working USB connection, insert your SD card in it, and use the attached file to copy the rom to your sd card. Then place the sd card in your xda2 go to boot loader mode and that is it.
The only problem is that whenever you want to change the rom version you will have to use another xda2 that has a working usb to transfere the rom image on your sd card.
hi
usb on my o2 is nt working...can somebody tell me the procedure for upgarding via sd card....i have the 2003se rom file with me...i read some articles but could nt understand them as they all needed to connect via cradle atsome time.....is there some method which can upgarde via sd card alone..
thanx
i have bought a second hand mda vario 2 (=tmobile branded htc hermes). when i connect a usb cable, it charges fine, but i believe the usb connector is broken. it charges fine, if you put the cable under a certain angle. leaving aside this problem which is impossible to fix, it is not able to connect through activesync!!!!! so i cannot update the rom. the device is simunlocked, but not cid unlocked. i tried to download Des' SSPL program and ran it while renaming the wm6 rom to HERMIMG.nbh (off course i extracted both executables, after which i ended up with RUU_signed.nbh (93 mb). i renamed this to HERMIMG.nbh). so i put the des sspl program and the renamed image on a format sd card and ran des sspl. but off course, it did not work... since it is not supercid, it cannot upgrade from sd card.
so does anyone have a solution to supercid the device without using the usb cable to activesync (bluetooth activesync maybe???) so i can do a sd flash?
maybe someone else has a solution to upgrade both the rom (os) and radio rom??
any help is appreciated.
i've tried mtty ==> but usb is not recognized at all, so that didn't do me any good
can i apply hard-spl over a bluetooth connection?
same question for removing the cidlock, can i remove the cidlock with an bluetooth active sync connection?
i also tried another computer, different usb cables, reinstalled activesync several times, tried as4.2 and 4.5 on the different computers... the usb cable only charges the unit, it is not recognized as a usb device.
i also tried several hard reset with and without letting the extended (tmobile) rom install.
problem fixed
MDA Vario does not sync with PC
Hi,
I am also trying to update my ROM for MDA Vario II. How were you able to fix the problem. Can you pls. let me know.
Thanks,
install rom from SD card
1. get a Micro Sd card under 2Gb ..
2. Format sd card Fat 32.
3.rename the rom file to HERMIMG.nbh.
4.copy the HERMIMG.nbh to Microsd card root.
5.Put back the Micro Sd card to the phone.
6.Hold ok button + power button and push the reset button by styles pen.
this will automatically start to install the rom.
PLEASE be sure you all are hardspled before do any any any any any any upgrade or rom change!!!!
Yep, What + Que PPC said, only in caps....
don't have Hard SPL, you're probably looking at a brick unless you're REALLY lucky and the rom is compatible with your carrier (NOT LIKELY).
Hi,
I have an O2 Atom Life which has been flashed by the latest official WM6 Rom via a USB cable and DDSU successfully.
I have since tried to flash to the following “PDAVIET ROM WM 6.1 CE OS 5.2.20753 Build 20753.1.4.0” via the SD Card method:
I have formatted the SD Card to FAT16, copied the AL1.DIO file, got to boot leader screen (Record + Reset), selected option 5 and inserted the SD Card, phone has detected the SD card but unfortunately I get the following error message “-> Found Mini-SD ->Files check error, cannot download MOT “. I have since tried including various files from the official Installation on the SD Card but I still get the same error message, I have tried every possible combination I could think of but its always the same error message.
1. Does anyone know how to fix this issue? Should I maybe try another ROM, is there another good one available for Atom Life?
2. Is it possible to flash this Rom using a USB connection and DDSU? (e.g. replacing the Flash.DIO file with AL1.DIO file, renaming it in the Windows\Temp folder and then trying to use the official rom upgrade application? Or will this method Brick my phone, has anyone tried to do that?
Thank you in advance.
I couldn't get Mango to install or get back to 6.5. I am on 7008 now. When I go to settings about it shows total storage 52.84 MB available storage 17.28MB. I have tried to install 6.5 with SD and usb. Nothing is working. I think my problem is my lost memory. How do I get it back? I have MAGLDR V1.13. I sure hope someone will help me.
flash WM ROM via computer with USB and then format SD via WM
OR
if u got micro SD to SD adapter use it to pu the sd card to your computer and fprmat it with SD-Formatter that you can download (google it)
good luck