I'm looking for a car-mount that will fit the Wizard.
I don't want a speaker or any connectors, just a mount, preferably with lots of foam so it doesn't squeek and rattle. I also don't want a 'window sucker' model.
I've googled it but can't find anything that says it will work with the Wizard.
Anyone seen/got one that will fit?
Me to.
I've been using Brodit mounts for the last couple of years but I keep swaping cars (between my own and a company one) recently.
This is the most promising one I've found so far.
http://www.arkon.com/pdamount.php
I like the look of this one because when I get a better case (flip type) there should be room to mount with it left in side.
Nice
Good range. Arkon only do a 'sucker' windshield mount for the jam/k-jam though.
Still looking.
Is there a UK site with them?
Any ideas when K-Jam accessories will appear? I want some screen protectors and don't like cutting bigger ones down to size.
Boxwave do some screen protectors and do ship to the UK.
http://www.boxwave.com/products/easyfinder/buy-best-i-mate-k-jam-accessories_734.htm
The Arkon kit CM910 has a vent, sticky Dash and suction cup mount included.
http://www.globalpositioningsystems.co.uk/arkon-universal-pda-mount-description.html
I think expansys do some Arkon Kit.
You might also want to look at
http://www.handnav.co.uk/product_details.php?id=126
http://www.globalpositioningsystems.co.uk/the-clip-company-vent-mount-description.html
Edit : I forgot to mention that Halfords do a expanding Phone Vent mount I think it's about £15.
Brodit is introducing a passive mount early this month (presumably 1st half).
Although I have not found any retailer selling it at the moment.
Cool I''ve been holding out for that one But I might get a cheap suction holder for the other cars I use.
I just bought a cheap HR Richter mini holder while I await a Brodit active holder.
Doesn't make sence for me to buy a passive holder now and an active holder in a while.
Brodit has released their mount for the wizard. I started a thread on HoFo
http://www.howardforums.com/showthread.php?t=764452
Brodit has released their mount for the wizard. I started a thread on HoFo
http://www.howardforums.com/showthread.php?t=764452
I'm using a plain old simple magnetic car holder from carphone warehouse which works just fine for me. £5 from carphonewarehouse - job done.
I'm using a plain old simple magnetic car holder from carphone warehouse which works just fine for me. £5 from carphonewarehouse - job done.
eayuwna said:
I'm looking for a car-mount that will fit the Wizard.
I don't want a speaker or any connectors, just a mount, preferably with lots of foam so it doesn't squeek and rattle. I also don't want a 'window sucker' model.
I've googled it but can't find anything that says it will work with the Wizard.
Anyone seen/got one that will fit?
Click to expand...
Click to collapse
Halfords has a universal holder for £14.99 that held my Vario very securely when I tried it in the shop and did not obscure the speakers or the USB port. It came with a window sucker and a sticky pad option. I'm not sure if there were clip or magnetic options as well.
Tesco have a universal holder for £4.97 that clips to the air vents. It was in a bubble pack and I could not tell whether it would open wide enough. But I don't suppose Tesco would object to a refund if it didn't, since there is no way to try before you buy.
Further to my post above I just bought a universal holder from a Vodafone shop for £5.00. It has air vent and sticky pad options and a slick/smooth adjustment operation - better than other units I tried for £10+. There is a gap at the bottom for headphones and USB charging if needed.
I don't like the idea of blowing hot air all over the back of the phone for hours in the middle of winter so I've plumped for the sticky option. I have yet to test it on the move with the Vario attached. I'll leave it overnight for the adhesive to stay stuck and then see how it goes.
ClearTouch Crystal, Qtek 9100 from Boxwave.
Any one who have tried that cleartouch crystal protection? Waitin for mine to arrive :/
q-biq said:
ClearTouch Crystal, Qtek 9100 from Boxwave.
Any one who have tried that cleartouch crystal protection? Waitin for mine to arrive :/
Click to expand...
Click to collapse
I've got one on my wizard and it looks great. I messed the first one up and i stuck the wrong side down on the screen and it gave an oil kind of effect on the screen, i'm sure the peel off sticker was on the wrong side, anyway i binned that and used one of the others i got and now it looks and fits great. had it on a few weeks now and its not scratched yet.
my last boxwave screen protector lasted over a year.
Hi all,
I have Brodit mounts available for the Mini (Wizard, Mini s) inc either a gooseneck mount or a brodit car specific pro clip.
Please feel free to visit www.dsldevelopments.co.uk for further details
Thanks, please PM me or email me if you have any questions or need any images,
Thanks
Dave
I've got this one and its fine!
http://cgi.ebay.co.uk/W-W-NEW-UNIVE...840540172QQcategoryZ10364QQrdZ1QQcmdZViewItem
Hi Stunno,
Am I corect with that one off ebay - the handfree and power socket are both obscurred by the base of the cradle?
Scott
This is the ONE! I jst got off the phone with www.proclipsusa.com, she is calling brodit to find out if it's in the shipment that's on it's way. I'll wait.
KJAM active mount
slewis1972 said:
Hi Stunno,
Am I corect with that one off ebay - the handfree and power socket are both obscurred by the base of the cradle?
Scott
Click to expand...
Click to collapse
No, the "base" only sticks out 3 or 4mm
Related
Hi,
Here it is from Clove!
http://www.clove.co.uk/viewProduct....&product=1D0A78F8-C643-40C0-A006-1157B4C8200C
£45.83 inc VAT
A bit expensive considering their active car holders are usually £33-ish.
Will defo get one when it is available in more places!
If anyone has got one already, please post a review
Thanks.
i have a Brodit passive holder....
just a quick comment on it..
I have had a brodit holder for every PDA i have had for the last X amount of years and have never been unhappy in the least bit...
When i picked up the holder for the TC from the local shop here in Sweden, I looked at it and said "boy that looks tiny".... i thought maybe my head was playing tricks on me...
i took it out of the package at the counter and tried to shove my phone in it.... I would have needed a crow bar, and elephant and some butter to get it in there....
luckily the shop that i bought it from also doubles as a car stereo installation/ car mod shop.....
one of the guys from the shop was there and whisked me into the back and got out his heat gun and heated it up and together we made it fit to a T.
now it is perfect and i love it....
(i wonder, did brodit try to make this only with dimension from HTC, or had they an actual unit during their manufacturing process???)
anyway now i am once again a satisfied Brodit customer....
Proclip
I just got my holder yesterday. While tyhese are a little more than all the others I have seen it looks to be about the best holder I hqave ever had. I had one of the cheap ones off ebay and it broke already. This one seems to be very well made. They offer a few different models for the TC. With or without tilt or charger. I got one with the tilt and I like it. For what these phones cost it is worth it to get a quality holder for the car.
This my carholder-active, orginal for P3300
I got the Brodit as well as I've used them before and they are really well made....that is, except for this one which is as tight as you like. The o2 orbit2 does not fit it properly and I'm now having to debate sending it back vs. finding someone with a heat gun !!!!
In fact, I returned it and have just received another one....problem is that this one is even tighter. Will now have to find someone with a heat gun !!!!
Mine is a tight fit too but far better than the one I had for my last pda. If it isn't tight it buggers up the mini usb connection. The fitting kit for the car works fine too but it would have been better if the curley cable was shorter and the straight bit from the mount was longer just to make it easier to route the cable.
If you're looking for a car holder for the touch cruise, go to best buy in the auto dept., look for one made for the iphone and ipod both. It is around $12 and clips onto your air vent. The cruise fits in it perfectly.
Has anybody seen a car holder for the HTC Touch HD? Not the univeral ones which fit for a lot of different devices. I mean holders like the ones from Richter or Brodit.
I couldn't find any touch hd specific ... looks like these vendors are slow with expending their product portfolio!
As usual for every new phone, i order the Herbert Richter product
http://www.clove.co.uk/viewProduct....category=00394707-5A1A-4D70-98A5-4CD5F1638611
Waiting for avaibility....
so youbuy the holder bit (as you have linked), whats the other part youhave to buy (apart from the phone )
Brodit car holders are here
Hi there,
The holders for our Touch HD's have arrived at the Brodit-site:
http://www.brodit.com/?main=searchb...owModell=D0B8AFF1-0D4C-403F-AF24-7CBF0151CE61
I don't know about other countries/suppliers, but in the neterlands, www.pdaplus.nl says the will have them in 1-2 weeks...
Well spotted Nooky, not even on their news page yet! This is the one I have been waiting for. Any UK suppliers yet?
Can you also use this holder in landscape mode?
Philosoma said:
Well spotted Nooky, not even on their news page yet! This is the one I have been waiting for. Any UK suppliers yet?
Click to expand...
Click to collapse
DSL Developments, http://www.dsldevelopments.com/. Very helpful and now have them available to order. How soon they'll ship them, no idea.
They also offer a 3-in-1, with:
- Mini USB for charging
- 3,5 mm audion for sound out
- HTC Ext USB for original headset
Surely, if it only attaches to ExtUSB the 3.5mm and the ExtUSB for headset won't work? Connecting a HTC Headset from Polaris certainly fails on HD ExtUSB...
rickgillyon said:
DSL Developments, http://www.dsldevelopments.com/. Very helpful and now have them available to order. How soon they'll ship them, no idea.
Click to expand...
Click to collapse
Found them this morning, but 60 quid for the molex one? Bloody hell.. Getting the lighter socket one and will rewire it myself I think.
Hi,
Brodit relesed their holder series for Touch HD.
www.brodit.se
They are great and I use them for a while now.
Can be used in landscape
nf0 said:
Can you also use this holder in landscape mode?
Click to expand...
Click to collapse
If you buy the "tilt swivel" version; you can.
The opening to slide it in will remain on the short side, so if you tilt the holder 90 degrees the phone is held by the upper and lower side and the left OR right side (with the usb-plug).
I have had several holders from brodit for my HTC phones and the phone is always held so tight (without scratching!) that you won't have to worry that the phone will slide out sideways when in landscape-position.
Anyone used the Brodit Holder with their ProClip Mounting over the vent? I prefer not to drill holes or stick it!
I've used a Brodit Proclip on my last three cars, brilliant fit every time, latest is over the vent. Recommended.
galaxys said:
Anyone used the Brodit Holder with their ProClip Mounting over the vent? I prefer not to drill holes or stick it!
Click to expand...
Click to collapse
Yes, I normaly use proclip over the vent so that I'll have the phone near to me and in clear view.
Brodit has amazing produts made of very good and solid plastic. Not like some low cost holders that you might find.
But I think it all depends on the car you have. Brodit normaly has several sugestions to place the proclip, so I think they have it for everyone taste.
Jbs_Israel said:
As usual for every new phone, i order the Herbert Richter product
http://www.clove.co.uk/viewProduct....category=00394707-5A1A-4D70-98A5-4CD5F1638611
Waiting for avaibility....
Click to expand...
Click to collapse
I've upgraded from a HTC Trinity (which came with Herbert Richter car mount) and this works very well with the Touch HD - it's a slightly tighter fit, but very stable and allows the car charger to fit easily. Thought some people may find this useful at least as a stopgap until the proper Touch HD one is available
Hi,
What about a good holder that attaches to your windscreen? The Brodit ones are all very well but what happens if you are using a different car? Say if you go abroad and get a hire car, will the brodit holder be able to transfer?
the previously mentioned: Herbert Richter car mount uses a sucker. i am trying to decide between that and the brodit. Herbert Richter car mount isnt out yet for the HD.
Do either of them allow you to use it in landscape as well?
You can buy a sucker for the Brodit too if you prefer (or additionally):
http://www.dsldevelopments.com/brodit/suctionDSL.asp
Brodit will release an Active Holder in 2 weeks, i will wait to get this one, cause brodit is great
kerni said:
Brodit will release an Active Holder in 2 weeks, i will wait to get this one, cause brodit is great
Click to expand...
Click to collapse
...until you want to use another car I suppose.
With my n560 I have been using a Brodit activ holder in combination with a Herbert Richter Mounting device for the window. Therefore you only have to buy an adapter-plate for approximately 5€.
Has anyone seen a cradle for the TD2 yet? I've got a Brodit mount in my car with the cradle for the Kaiser, but I'm after a new one now.
Received this from Brodit when I asked about a D2 mount:
"Hi!
For the moment we can’t say any clear date but please check the web within a couple of weeks.
Best Regards"
galvinize said:
Received this from Brodit when I asked about a D2 mount:
"Hi!
For the moment we can’t say any clear date but please check the web within a couple of weeks.
Best Regards"
Click to expand...
Click to collapse
Got the same answer, more people email them then they'll know there's demand out there and get a move on.
brodit cradles available
cactusbob said:
Has anyone seen a cradle for the TD2 yet? I've got a Brodit mount in my car with the cradle for the Kaiser, but I'm after a new one now.
Click to expand...
Click to collapse
just found the new cradles available on the brodit site (512011 Active Holder, Tilt Swivel
With cigg-plug. and many others)
No info about price and delivery time yet
Nice spot, have emailed a few suppliers asking for price and dates.
Just Pre-Ordered Mine
Hi
Just ordered mine from DSL.
http://www.dsldevelopments.com/brodit/Holder/HTC+Touch Diamond 2 T5353-Brodit-Holder.asp
Can't wait till it lands.
Looking at the picture on the site, it's not obvious exactly what part of the dashboard it attaches to and how?
hotlips69 said:
Looking at the picture on the site, it's not obvious exactly what part of the dashboard it attaches to and how?
Click to expand...
Click to collapse
Brodit holders come in two parts, a custom bit that holds the phone which is unique for each phone, and the proclip bit designed for your car. Where exactly on the dash it fits depends on which which car you have and which proclip you buy for your car. You're best off calling to find out, although most of them seem to have an option to fit over the central air vents.
Hi,
Any update??
I have preordered from mobilefun but still nothing.
Hi,
Got my cradle today from mobilefun. Just need a reliable navigation software.
Ordered mine from mobilefun yesterday, came this morning, fits great
cactusbob said:
Ordered mine from mobilefun yesterday, came this morning, fits great
Click to expand...
Click to collapse
What one did you get?, and did you get a in car charger with it?
I'm looking for one that attaches to the dash/air ventthat will also support a chrger.
Was looking at the Brodit one, and although they do look quite nice, £50+ for the holder and clip is a little steep in my mind.
I got the passive one, I already have a HTC car charger (with a pretty blue light). I only got the phone part as I already had the vent mount for my car from my previous phone. Thats the benefit really - you only need to change the phone bit. The Brodit mounts are a bit expensive but the quality is excellent and the phone fits really well
cactusbob said:
I got the passive one, I already have a HTC car charger (with a pretty blue light). I only got the phone part as I already had the vent mount for my car from my previous phone. Thats the benefit really - you only need to change the phone bit. The Brodit mounts are a bit expensive but the quality is excellent and the phone fits really well
Click to expand...
Click to collapse
Cheers - one last question - I see the tilt and swivel, but to the rotate though 90°, so the phone can be viewed horitontally (i.e. when using it as a Sat Nav)?
Yes the mount is in two parts, the bit that attached to the car and the bit that the phone goes in. The connection between the two is a swivel joint
I've just ordered one HTC Touch Diamond2 / T5353 Car Upgrade Kit - CU S240 from here, better says - preordered.
It says it will be avaible in 10 days or more...
Is this site reliable?
mirmarmms said:
I've just ordered one HTC Touch Diamond2 / T5353 Car Upgrade Kit - CU S240 from here, better says - preordered.
It says it will be avaible in 10 days or more...
Is this site reliable?
Click to expand...
Click to collapse
I have this item ordered from mobilefun.co.uk, they say 2 - 3 days and it'll be in stock, but I wouldn't be so sure about that.
This is the same type of car kit I used for my Diamond 1, and that one worked very well, so I don't mind waiting for this one.
Oh, expansys says they won't have this car kit in stock until June 23rd.. so, I'm prepared to be waiting anything up until then!
still not avaible CU S240...
received today from:
http://www.sv2i.com/search/fiche.asp?ref_produit=BT-CMS-HD2
http://www.sv2i.com/search/fiche.asp?ref_produit=PDA-3BHTD2F41
I have just bought the proclip and passive holder from dsl, then I bought a car charger from ebay, I will post what they are like as soon as they arrive, and if I'm clever enough to fit them in my car.
11/06/09
The cradle arrived today, it turned out that I actually ordered the wrong proclip, I intended to buy the one that bind to the right A/C vent of my (RHD) Corsa, but instead I ordered one that binds onto the bottom left of the dashboard. As it was though, I actually think the ordering error turned out for the better, the postion of the phone was still very readable, easily reachable, and it means that when I plug in the phone charger I won't see a wire dangling all the way across my dashboard, which would be unsightly as well as inconveineant. I would recommend this position of proclip for everyone, I know it seems strange that you need to look down at the phone, but when I took it out for a spin today it worked great.
Unsuprisingly, the cradle itself was fantastic way worth the extra money I paid for, the phone actually slips into position, I was sceptical at first about perfect fits, but the fit really was impeccable.
The fitting process was simple and straightforward (if I can do it anyone can) but requires a bit of brute force, but in my opinion that just came to show how sturdy the kit is. You know it's not going to go anywhere.
For those who are looking for a car holder for their TP2 and can't find one yet, I have made a useful discovery.
The Brodit TyTNII Holder actually fits the TP2 better than my TyTNII ever did!
http://www.dsldevelopments.com/brodit/holder/HTC+TyTN II-Brodit-Holder.asp
I tried it last night and it slid into the fixing nice and easily.
The only issue I had was that I have an active holder, so the miniUSB connector wasn't lined up and so wouldn't charge the phone. I'm sure with some careful modification it wouldn't be too difficult to sort that out though!
I'm now in two minds as to whether I even bother getting a proper TP2 kit when it's out!
dazultra2000 said:
For those who are looking for a car holder for their TP2 and can't find one yet, I have made a useful discovery.
The Brodit TyTNII Holder actually fits the TP2 better than my TyTNII ever did!
http://www.dsldevelopments.com/brodit/holder/HTC+TyTN II-Brodit-Holder.asp
I tried it last night and it slid into the fixing nice and easily.
The only issue I had was that I have an active holder, so the miniUSB connector wasn't lined up and so wouldn't charge the phone. I'm sure with some careful modification it wouldn't be too difficult to sort that out though!
I'm now in two minds as to whether I even bother getting a proper TP2 kit when it's out!
Click to expand...
Click to collapse
just a quick question. Ive never owned one of these fo rhte car. How does it attach to your car? Adhesive? Screws?
mallman said:
just a quick question. Ive never owned one of these fo rhte car. How does it attach to your car? Adhesive? Screws?
Click to expand...
Click to collapse
Depends, you can just screw it into your car, but I use the Brodit Proclip which is different for every car. Mine hooks around the side of the radio and into another groove and is very solid, then the holders screw into the proclip.
Proclips are probably the best way forward, no holes in your car
I have a dashmount kit from www.dashmount.co.uk as the proclip from brodit doesn't seem to fit my car correctly.
dazultra2000 said:
For those who are looking for a car holder for their TP2 and can't find one yet, I have made a useful discovery.
The Brodit TyTNII Holder actually fits the TP2 better than my TyTNII ever did!
http://www.dsldevelopments.com/brodit/holder/HTC+TyTN II-Brodit-Holder.asp
I tried it last night and it slid into the fixing nice and easily.
The only issue I had was that I have an active holder, so the miniUSB connector wasn't lined up and so wouldn't charge the phone. I'm sure with some careful modification it wouldn't be too difficult to sort that out though!
I'm now in two minds as to whether I even bother getting a proper TP2 kit when it's out!
Click to expand...
Click to collapse
I have the passive brodit holder for the TYTN II, but TP2 doesn't fit without scrating it.
seems to fit in my origional htc trinity carrier perfectly, only problem is i cant charge it lol so ill have to get a new one eventually
thank you for the tip!!
I have a Brodit Active holder for my old P3600 (Trinity) and it fits real nice...
After some modifications (I cut off the USB part, and super glued it back on at the correct place to fit my TP2) I now have a Brodit Active holder that I can use again!
No scratches what so ever!!
(saves me about €50 )
^Good Tips...Brodit has always been my favorate car holder for all my devices!
do you know when the TP2 model will be released?
thanks
asked brodit and they say later next week...
Brodit holders now available. Just got to wait for them to filter to your resellers now.
Active: http://www.brodit.com/productinformation.jsp?anr=512021&sortiment=null
Passive: http://www.brodit.com/productinformation.jsp?anr=511021&sortiment=null
As I have already said, looks more or less identical to the Kaiser mount with a central support.
A word of warning to people buying, I had 2 active Brodit mounts that killed 2 different Kaisers because the charger unit was dodgy.
In the end I got another replacement from Brodit but I was too cautious of them by then, so I hacked an official HTC car charger into it.
I am personally gonna get the passive holder and use my HTC charger as I'm not going to take the risk again.
The htc supplied trinity/m700 one fits a dream but needs the bottom cutting out a little as the plug socket is in a different location. Damn good sturdy mount as well.
not sure I'll be getting any until it is confirmed that the pins are aligned and the phone does charge when using GPS.
I had issues with the Brodit one for the Kaiser and when it never worked they blamed HTC
Just ordered my passive with tilt swivel now!
Hope it arrives soon!!
Deiota said:
Just ordered my passive with tilt swivel now!
Hope it arrives soon!!...
Click to expand...
Click to collapse
Where did you end up ordering from, all I can find are 'pre order' listings ?
Thanks
Messa
elab said:
Where did you end up ordering from, all I can find are 'pre order' listings ?
Thanks
Messa
Click to expand...
Click to collapse
DSL Developments have 6 passive mounts in stock according to the website.
Gordon
GordonTGopher said:
DSL Developments have 6 passive mounts in stock according to the website.
Gordon
Click to expand...
Click to collapse
Hi, yes I saw those I am leaning more towards the active one though.
Thanks anyway.
Messa
I ordered a passive mount this morning and a new proclip to see if they ship the right one this time!
I'd try and heed my advice about the active mounts. At least wait until some other poor guinea pig has tried one!
I asked HTC This:
Is there an option for the HTC Touch Pro2 with the HTC 3-in-1 connector bundle?
Or is this compatible:
Set A
- 513021 Active Holder, Tilt Swivel
- 945011 Adapter Cable
Set B
- 512021 Active Holder, Tilt Swivel
- 945011 Adapter Cable
In terms of connecting my HTC touch Pro2 to a charging unit (built in the car) and also using the AUX out of the device via the mini-USB.
I want to know if the 3-in-1 cable/connector is able to be “plugged” in into 513021 of 512021
They answered me this:
It will also come a 3-in-1 holder for this device. The item no will be:
519021 short cable
520021 long cable
I hope those will be ready within 2-3 weeks.
One thing that you need to keep in mind with the 3-in-1 cables in that if you plug it in, the external speaker gets disabled. therefore if you're planning on using the mount for satnav, you'll need to hook it up to an aux-in on your car speakers in order to get any sound!
I have always used Brodit cradles for all my devices over the last few years. I find them reliable, very strong and easy to put together.
For some reason Brodit havent released a cradle for this device yet - has anyone got any ideas where i can get one that is for vents?
thanks
nk33 said:
I have always used Brodit cradles for all my devices over the last few years. I find them reliable, very strong and easy to put together.
For some reason Brodit havent released a cradle for this device yet - has anyone got any ideas where i can get one that is for vents?
thanks
Click to expand...
Click to collapse
There are a few on ebay in the $12-15 range and some on Amazon in the $25 range. I just did a search for Samsung 7.7 vent mount.
sorry - for got to mention - i already bought one from ebay - that is the problem - hence my post
the ones on ebay are flimsy, lowsy horrible things...make sure you dont buy one. the ball and socket which allows it to swivel lost its stiffness after about 10 minutes of use and i just took it off. also the connection to the vent is weak at best. the connection to the actual plastic is so weak that when I turned a corner once the thing fell out!
i had a galaxy tab 7 inch and the brodit cradle for that was nice and solid - you would have to tug hard to move it anywhere - also the ball and socket was adjustable by just making the screw tighter
nk33 said:
For some reason Brodit havent released a cradle for this device yet - has anyone got any ideas where i can get one that is for vents?
thanks
Click to expand...
Click to collapse
Looks like they have now: http://www.brodit.com/newsDetails.html?id=120229
U r a legend! I been checking that site for months and gave up last week!
Always the way!
Hmm I've bought the official car mount already,
and i'm waiting it to arrive...
Just wondering, what's the advantage of car vent compared to car mount?
isnt' carmount more universal? because with this you have to choose clips specific to your car?
Very tempting, the good is that for my car, Dodge Caliber, there two options, the vent and center console, i might go with the center console option
Edit: i went to the US retailer website but they do not have the tab holder listed yet only the one for the original tab, but they do have the vent and center console mount, the mount is $29.99 a bit much and i wonder how much will be for the tab holder.
Sent from my GT-P6800 using xda premium
morkli said:
Looks like they have now: http://www.brodit.com/newsDetails.html?id=120229
Click to expand...
Click to collapse
It's not available in the US on the ProclipUSA website. Didn't know brodit and Proclip were somehow associated. Always bought Proclip, thinking it was designed and made in the USA? Maybe it is.
Whatever the case, I just called Proclip, it will be available in the USA next week, they'll send me an email about it. Can't order it right now.
RipplingHurst said:
It's not available in the US on the ProclipUSA website. Didn't know brodit and Proclip were somehow associated. Always bought Proclip, thinking it was designed and made in the USA? Maybe it is.
Whatever the case, I just called Proclip, it will be available in the USA next week, they'll send me an email about it. Can't order it right now.
Click to expand...
Click to collapse
thats good, please keep us updated
Finally got mine and it sits solid as a rock to the left of my HTC sensation XE!! sweeeet!!
bluetooth straight to audio my JVC AVX55 stereo!!! while the htc goes to the handseat bluetooth
I agree that Brodit mounts are superb - I got mine - Brodit Passive Car Cradle Holder Tilt Swivel for Samsung Nexus S (#511227) from Amazon UK. It is rock solid.
My Brodit from Proclip arrived Thursday. Its really nice. I originally had a ram mount in my truck for the Motorola xoom. The Proclip is nice but I ordered the console mount instead of the vent mount for Toyota 2005 Tacoma. I'm using the console mount piece as a cable organizer and just bolted the pro clip backing to the Ram mount fitting since the holes matched. I am hoping to post pictures and review soon.