I have always used Brodit cradles for all my devices over the last few years. I find them reliable, very strong and easy to put together.
For some reason Brodit havent released a cradle for this device yet - has anyone got any ideas where i can get one that is for vents?
thanks
nk33 said:
I have always used Brodit cradles for all my devices over the last few years. I find them reliable, very strong and easy to put together.
For some reason Brodit havent released a cradle for this device yet - has anyone got any ideas where i can get one that is for vents?
thanks
Click to expand...
Click to collapse
There are a few on ebay in the $12-15 range and some on Amazon in the $25 range. I just did a search for Samsung 7.7 vent mount.
sorry - for got to mention - i already bought one from ebay - that is the problem - hence my post
the ones on ebay are flimsy, lowsy horrible things...make sure you dont buy one. the ball and socket which allows it to swivel lost its stiffness after about 10 minutes of use and i just took it off. also the connection to the vent is weak at best. the connection to the actual plastic is so weak that when I turned a corner once the thing fell out!
i had a galaxy tab 7 inch and the brodit cradle for that was nice and solid - you would have to tug hard to move it anywhere - also the ball and socket was adjustable by just making the screw tighter
nk33 said:
For some reason Brodit havent released a cradle for this device yet - has anyone got any ideas where i can get one that is for vents?
thanks
Click to expand...
Click to collapse
Looks like they have now: http://www.brodit.com/newsDetails.html?id=120229
U r a legend! I been checking that site for months and gave up last week!
Always the way!
Hmm I've bought the official car mount already,
and i'm waiting it to arrive...
Just wondering, what's the advantage of car vent compared to car mount?
isnt' carmount more universal? because with this you have to choose clips specific to your car?
Very tempting, the good is that for my car, Dodge Caliber, there two options, the vent and center console, i might go with the center console option
Edit: i went to the US retailer website but they do not have the tab holder listed yet only the one for the original tab, but they do have the vent and center console mount, the mount is $29.99 a bit much and i wonder how much will be for the tab holder.
Sent from my GT-P6800 using xda premium
morkli said:
Looks like they have now: http://www.brodit.com/newsDetails.html?id=120229
Click to expand...
Click to collapse
It's not available in the US on the ProclipUSA website. Didn't know brodit and Proclip were somehow associated. Always bought Proclip, thinking it was designed and made in the USA? Maybe it is.
Whatever the case, I just called Proclip, it will be available in the USA next week, they'll send me an email about it. Can't order it right now.
RipplingHurst said:
It's not available in the US on the ProclipUSA website. Didn't know brodit and Proclip were somehow associated. Always bought Proclip, thinking it was designed and made in the USA? Maybe it is.
Whatever the case, I just called Proclip, it will be available in the USA next week, they'll send me an email about it. Can't order it right now.
Click to expand...
Click to collapse
thats good, please keep us updated
Finally got mine and it sits solid as a rock to the left of my HTC sensation XE!! sweeeet!!
bluetooth straight to audio my JVC AVX55 stereo!!! while the htc goes to the handseat bluetooth
I agree that Brodit mounts are superb - I got mine - Brodit Passive Car Cradle Holder Tilt Swivel for Samsung Nexus S (#511227) from Amazon UK. It is rock solid.
My Brodit from Proclip arrived Thursday. Its really nice. I originally had a ram mount in my truck for the Motorola xoom. The Proclip is nice but I ordered the console mount instead of the vent mount for Toyota 2005 Tacoma. I'm using the console mount piece as a cable organizer and just bolted the pro clip backing to the Ram mount fitting since the holes matched. I am hoping to post pictures and review soon.
Related
I'm looking for a car-mount that will fit the Wizard.
I don't want a speaker or any connectors, just a mount, preferably with lots of foam so it doesn't squeek and rattle. I also don't want a 'window sucker' model.
I've googled it but can't find anything that says it will work with the Wizard.
Anyone seen/got one that will fit?
Me to.
I've been using Brodit mounts for the last couple of years but I keep swaping cars (between my own and a company one) recently.
This is the most promising one I've found so far.
http://www.arkon.com/pdamount.php
I like the look of this one because when I get a better case (flip type) there should be room to mount with it left in side.
Nice
Good range. Arkon only do a 'sucker' windshield mount for the jam/k-jam though.
Still looking.
Is there a UK site with them?
Any ideas when K-Jam accessories will appear? I want some screen protectors and don't like cutting bigger ones down to size.
Boxwave do some screen protectors and do ship to the UK.
http://www.boxwave.com/products/easyfinder/buy-best-i-mate-k-jam-accessories_734.htm
The Arkon kit CM910 has a vent, sticky Dash and suction cup mount included.
http://www.globalpositioningsystems.co.uk/arkon-universal-pda-mount-description.html
I think expansys do some Arkon Kit.
You might also want to look at
http://www.handnav.co.uk/product_details.php?id=126
http://www.globalpositioningsystems.co.uk/the-clip-company-vent-mount-description.html
Edit : I forgot to mention that Halfords do a expanding Phone Vent mount I think it's about £15.
Brodit is introducing a passive mount early this month (presumably 1st half).
Although I have not found any retailer selling it at the moment.
Cool I''ve been holding out for that one But I might get a cheap suction holder for the other cars I use.
I just bought a cheap HR Richter mini holder while I await a Brodit active holder.
Doesn't make sence for me to buy a passive holder now and an active holder in a while.
Brodit has released their mount for the wizard. I started a thread on HoFo
http://www.howardforums.com/showthread.php?t=764452
Brodit has released their mount for the wizard. I started a thread on HoFo
http://www.howardforums.com/showthread.php?t=764452
I'm using a plain old simple magnetic car holder from carphone warehouse which works just fine for me. £5 from carphonewarehouse - job done.
I'm using a plain old simple magnetic car holder from carphone warehouse which works just fine for me. £5 from carphonewarehouse - job done.
eayuwna said:
I'm looking for a car-mount that will fit the Wizard.
I don't want a speaker or any connectors, just a mount, preferably with lots of foam so it doesn't squeek and rattle. I also don't want a 'window sucker' model.
I've googled it but can't find anything that says it will work with the Wizard.
Anyone seen/got one that will fit?
Click to expand...
Click to collapse
Halfords has a universal holder for £14.99 that held my Vario very securely when I tried it in the shop and did not obscure the speakers or the USB port. It came with a window sucker and a sticky pad option. I'm not sure if there were clip or magnetic options as well.
Tesco have a universal holder for £4.97 that clips to the air vents. It was in a bubble pack and I could not tell whether it would open wide enough. But I don't suppose Tesco would object to a refund if it didn't, since there is no way to try before you buy.
Further to my post above I just bought a universal holder from a Vodafone shop for £5.00. It has air vent and sticky pad options and a slick/smooth adjustment operation - better than other units I tried for £10+. There is a gap at the bottom for headphones and USB charging if needed.
I don't like the idea of blowing hot air all over the back of the phone for hours in the middle of winter so I've plumped for the sticky option. I have yet to test it on the move with the Vario attached. I'll leave it overnight for the adhesive to stay stuck and then see how it goes.
ClearTouch Crystal, Qtek 9100 from Boxwave.
Any one who have tried that cleartouch crystal protection? Waitin for mine to arrive :/
q-biq said:
ClearTouch Crystal, Qtek 9100 from Boxwave.
Any one who have tried that cleartouch crystal protection? Waitin for mine to arrive :/
Click to expand...
Click to collapse
I've got one on my wizard and it looks great. I messed the first one up and i stuck the wrong side down on the screen and it gave an oil kind of effect on the screen, i'm sure the peel off sticker was on the wrong side, anyway i binned that and used one of the others i got and now it looks and fits great. had it on a few weeks now and its not scratched yet.
my last boxwave screen protector lasted over a year.
Hi all,
I have Brodit mounts available for the Mini (Wizard, Mini s) inc either a gooseneck mount or a brodit car specific pro clip.
Please feel free to visit www.dsldevelopments.co.uk for further details
Thanks, please PM me or email me if you have any questions or need any images,
Thanks
Dave
I've got this one and its fine!
http://cgi.ebay.co.uk/W-W-NEW-UNIVE...840540172QQcategoryZ10364QQrdZ1QQcmdZViewItem
Hi Stunno,
Am I corect with that one off ebay - the handfree and power socket are both obscurred by the base of the cradle?
Scott
This is the ONE! I jst got off the phone with www.proclipsusa.com, she is calling brodit to find out if it's in the shipment that's on it's way. I'll wait.
KJAM active mount
slewis1972 said:
Hi Stunno,
Am I corect with that one off ebay - the handfree and power socket are both obscurred by the base of the cradle?
Scott
Click to expand...
Click to collapse
No, the "base" only sticks out 3 or 4mm
Has anybody seen a car holder for the HTC Touch HD? Not the univeral ones which fit for a lot of different devices. I mean holders like the ones from Richter or Brodit.
I couldn't find any touch hd specific ... looks like these vendors are slow with expending their product portfolio!
As usual for every new phone, i order the Herbert Richter product
http://www.clove.co.uk/viewProduct....category=00394707-5A1A-4D70-98A5-4CD5F1638611
Waiting for avaibility....
so youbuy the holder bit (as you have linked), whats the other part youhave to buy (apart from the phone )
Brodit car holders are here
Hi there,
The holders for our Touch HD's have arrived at the Brodit-site:
http://www.brodit.com/?main=searchb...owModell=D0B8AFF1-0D4C-403F-AF24-7CBF0151CE61
I don't know about other countries/suppliers, but in the neterlands, www.pdaplus.nl says the will have them in 1-2 weeks...
Well spotted Nooky, not even on their news page yet! This is the one I have been waiting for. Any UK suppliers yet?
Can you also use this holder in landscape mode?
Philosoma said:
Well spotted Nooky, not even on their news page yet! This is the one I have been waiting for. Any UK suppliers yet?
Click to expand...
Click to collapse
DSL Developments, http://www.dsldevelopments.com/. Very helpful and now have them available to order. How soon they'll ship them, no idea.
They also offer a 3-in-1, with:
- Mini USB for charging
- 3,5 mm audion for sound out
- HTC Ext USB for original headset
Surely, if it only attaches to ExtUSB the 3.5mm and the ExtUSB for headset won't work? Connecting a HTC Headset from Polaris certainly fails on HD ExtUSB...
rickgillyon said:
DSL Developments, http://www.dsldevelopments.com/. Very helpful and now have them available to order. How soon they'll ship them, no idea.
Click to expand...
Click to collapse
Found them this morning, but 60 quid for the molex one? Bloody hell.. Getting the lighter socket one and will rewire it myself I think.
Hi,
Brodit relesed their holder series for Touch HD.
www.brodit.se
They are great and I use them for a while now.
Can be used in landscape
nf0 said:
Can you also use this holder in landscape mode?
Click to expand...
Click to collapse
If you buy the "tilt swivel" version; you can.
The opening to slide it in will remain on the short side, so if you tilt the holder 90 degrees the phone is held by the upper and lower side and the left OR right side (with the usb-plug).
I have had several holders from brodit for my HTC phones and the phone is always held so tight (without scratching!) that you won't have to worry that the phone will slide out sideways when in landscape-position.
Anyone used the Brodit Holder with their ProClip Mounting over the vent? I prefer not to drill holes or stick it!
I've used a Brodit Proclip on my last three cars, brilliant fit every time, latest is over the vent. Recommended.
galaxys said:
Anyone used the Brodit Holder with their ProClip Mounting over the vent? I prefer not to drill holes or stick it!
Click to expand...
Click to collapse
Yes, I normaly use proclip over the vent so that I'll have the phone near to me and in clear view.
Brodit has amazing produts made of very good and solid plastic. Not like some low cost holders that you might find.
But I think it all depends on the car you have. Brodit normaly has several sugestions to place the proclip, so I think they have it for everyone taste.
Jbs_Israel said:
As usual for every new phone, i order the Herbert Richter product
http://www.clove.co.uk/viewProduct....category=00394707-5A1A-4D70-98A5-4CD5F1638611
Waiting for avaibility....
Click to expand...
Click to collapse
I've upgraded from a HTC Trinity (which came with Herbert Richter car mount) and this works very well with the Touch HD - it's a slightly tighter fit, but very stable and allows the car charger to fit easily. Thought some people may find this useful at least as a stopgap until the proper Touch HD one is available
Hi,
What about a good holder that attaches to your windscreen? The Brodit ones are all very well but what happens if you are using a different car? Say if you go abroad and get a hire car, will the brodit holder be able to transfer?
the previously mentioned: Herbert Richter car mount uses a sucker. i am trying to decide between that and the brodit. Herbert Richter car mount isnt out yet for the HD.
Do either of them allow you to use it in landscape as well?
You can buy a sucker for the Brodit too if you prefer (or additionally):
http://www.dsldevelopments.com/brodit/suctionDSL.asp
Brodit will release an Active Holder in 2 weeks, i will wait to get this one, cause brodit is great
kerni said:
Brodit will release an Active Holder in 2 weeks, i will wait to get this one, cause brodit is great
Click to expand...
Click to collapse
...until you want to use another car I suppose.
With my n560 I have been using a Brodit activ holder in combination with a Herbert Richter Mounting device for the window. Therefore you only have to buy an adapter-plate for approximately 5€.
Has anyone seen a cradle for the TD2 yet? I've got a Brodit mount in my car with the cradle for the Kaiser, but I'm after a new one now.
Received this from Brodit when I asked about a D2 mount:
"Hi!
For the moment we can’t say any clear date but please check the web within a couple of weeks.
Best Regards"
galvinize said:
Received this from Brodit when I asked about a D2 mount:
"Hi!
For the moment we can’t say any clear date but please check the web within a couple of weeks.
Best Regards"
Click to expand...
Click to collapse
Got the same answer, more people email them then they'll know there's demand out there and get a move on.
brodit cradles available
cactusbob said:
Has anyone seen a cradle for the TD2 yet? I've got a Brodit mount in my car with the cradle for the Kaiser, but I'm after a new one now.
Click to expand...
Click to collapse
just found the new cradles available on the brodit site (512011 Active Holder, Tilt Swivel
With cigg-plug. and many others)
No info about price and delivery time yet
Nice spot, have emailed a few suppliers asking for price and dates.
Just Pre-Ordered Mine
Hi
Just ordered mine from DSL.
http://www.dsldevelopments.com/brodit/Holder/HTC+Touch Diamond 2 T5353-Brodit-Holder.asp
Can't wait till it lands.
Looking at the picture on the site, it's not obvious exactly what part of the dashboard it attaches to and how?
hotlips69 said:
Looking at the picture on the site, it's not obvious exactly what part of the dashboard it attaches to and how?
Click to expand...
Click to collapse
Brodit holders come in two parts, a custom bit that holds the phone which is unique for each phone, and the proclip bit designed for your car. Where exactly on the dash it fits depends on which which car you have and which proclip you buy for your car. You're best off calling to find out, although most of them seem to have an option to fit over the central air vents.
Hi,
Any update??
I have preordered from mobilefun but still nothing.
Hi,
Got my cradle today from mobilefun. Just need a reliable navigation software.
Ordered mine from mobilefun yesterday, came this morning, fits great
cactusbob said:
Ordered mine from mobilefun yesterday, came this morning, fits great
Click to expand...
Click to collapse
What one did you get?, and did you get a in car charger with it?
I'm looking for one that attaches to the dash/air ventthat will also support a chrger.
Was looking at the Brodit one, and although they do look quite nice, £50+ for the holder and clip is a little steep in my mind.
I got the passive one, I already have a HTC car charger (with a pretty blue light). I only got the phone part as I already had the vent mount for my car from my previous phone. Thats the benefit really - you only need to change the phone bit. The Brodit mounts are a bit expensive but the quality is excellent and the phone fits really well
cactusbob said:
I got the passive one, I already have a HTC car charger (with a pretty blue light). I only got the phone part as I already had the vent mount for my car from my previous phone. Thats the benefit really - you only need to change the phone bit. The Brodit mounts are a bit expensive but the quality is excellent and the phone fits really well
Click to expand...
Click to collapse
Cheers - one last question - I see the tilt and swivel, but to the rotate though 90°, so the phone can be viewed horitontally (i.e. when using it as a Sat Nav)?
Yes the mount is in two parts, the bit that attached to the car and the bit that the phone goes in. The connection between the two is a swivel joint
I've just ordered one HTC Touch Diamond2 / T5353 Car Upgrade Kit - CU S240 from here, better says - preordered.
It says it will be avaible in 10 days or more...
Is this site reliable?
mirmarmms said:
I've just ordered one HTC Touch Diamond2 / T5353 Car Upgrade Kit - CU S240 from here, better says - preordered.
It says it will be avaible in 10 days or more...
Is this site reliable?
Click to expand...
Click to collapse
I have this item ordered from mobilefun.co.uk, they say 2 - 3 days and it'll be in stock, but I wouldn't be so sure about that.
This is the same type of car kit I used for my Diamond 1, and that one worked very well, so I don't mind waiting for this one.
Oh, expansys says they won't have this car kit in stock until June 23rd.. so, I'm prepared to be waiting anything up until then!
still not avaible CU S240...
received today from:
http://www.sv2i.com/search/fiche.asp?ref_produit=BT-CMS-HD2
http://www.sv2i.com/search/fiche.asp?ref_produit=PDA-3BHTD2F41
I have just bought the proclip and passive holder from dsl, then I bought a car charger from ebay, I will post what they are like as soon as they arrive, and if I'm clever enough to fit them in my car.
11/06/09
The cradle arrived today, it turned out that I actually ordered the wrong proclip, I intended to buy the one that bind to the right A/C vent of my (RHD) Corsa, but instead I ordered one that binds onto the bottom left of the dashboard. As it was though, I actually think the ordering error turned out for the better, the postion of the phone was still very readable, easily reachable, and it means that when I plug in the phone charger I won't see a wire dangling all the way across my dashboard, which would be unsightly as well as inconveineant. I would recommend this position of proclip for everyone, I know it seems strange that you need to look down at the phone, but when I took it out for a spin today it worked great.
Unsuprisingly, the cradle itself was fantastic way worth the extra money I paid for, the phone actually slips into position, I was sceptical at first about perfect fits, but the fit really was impeccable.
The fitting process was simple and straightforward (if I can do it anyone can) but requires a bit of brute force, but in my opinion that just came to show how sturdy the kit is. You know it's not going to go anywhere.
I know theres a thread on the Touch pro 2 Car mount but i dont know if any of those mounts work for the Tilt 2. I'm looking for something that fits nice and clips to the vent sturdy and also can rotate to landscape. I searched and searched and googled and cant find anything remotely good.
I bought a universal one but it was garbage
I know Proclip / brodit makes great car mounts but i cant justify paying 70 bucks for a car mount. ( 35 for the mount and 30 for the car mount part )
Sorry for making a new thread for this but i see a ton for the Touch pro 2 and still dont know if those will work with the tilt 2. Thanks for the help in advance
http://cgi.ebay.com/ws/eBayISAPI.dl...964413&ssPageName=STRK:MEWAX:IT#ht_4013wt_939
Anyone know if this will work with the Tilt 2?
dash mount
Best one I've found.... I hate Best Buy but they were the only ones in town with a decent mount. It was 24.99, a little more than I wanted to spend, but well worth it.
http://www.bestbuy.com/site/Xentris...lack/9072399.p?skuId=9072399&id=1218022585746
Nate
They should make a Better one
with charging dock like other Phones have
ilordvader said:
They should make a Better one
with charging dock like other Phones have
Click to expand...
Click to collapse
These days it seems like you're pulling teeth in terms of getting accessory developers to develop accessories for any non-iPod/iPhone devices...
This is the Bets one I found till now - HERE
most adjustable
I just ordered this one for a Tilt2. For $13 delivered it doesn't look to bad. I don't believe the TP2 exact fit ones will work with a Tilt2. I would be nice if one came out soon.
Looks like my usual vendor, ProClip USA is developing one, but it is not ready yet. Check them out at:
http://www.proclipusa.com/
I've looked at the ProClip. It looks pretty good. The problem is I just can't see spending close to $80 for one. I upgrade phones every 12-16 months Hell, I only spent $99 delivered for my Tilt2...
anit77 said:
I've looked at the ProClip. It looks pretty good. The problem is I just can't see spending close to $80 for one. I upgrade phones every 12-16 months Hell, I only spent $99 delivered for my Tilt2...
Click to expand...
Click to collapse
how did you do that?
anyway, did anybody try this:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
marcini said:
how did you do that?
anyway, did anybody try this:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
Click to expand...
Click to collapse
I did it here.
Again I'm weary of TP2 exact fit holders. That one is labeled for T7373, the Tilt2 is T7377. There is a small size difference. It does look decent though.
I drive a GMC Sierra and have been looking for a dash or vent mount. A windshield mount puts the phone out of arms reach.
krystos said:
Looks like my usual vendor, ProClip USA is developing one, but it is not ready yet. Check them out at:
http://www.proclipusa.com/
Click to expand...
Click to collapse
Actually this one is available. I've already got one in my truck for my Tilt 2.
be VERY careful with vent mounts. Your AC can make your phone cold causing it to condensate when you exit the vehicle and walk around outside ESP in high humidity areas thus voiding your warranty
proclip
i bought the proclip car kit for the tilt. now i have the tilt2.
the car mount fits great, good location. i agree it is expensive, but replacing the phone holder for the tilt2 is half the cost. still great fit and location.
moonwulf said:
i bought the proclip car kit for the tilt. now i have the tilt2.
the car mount fits great, good location. i agree it is expensive, but replacing the phone holder for the tilt2 is half the cost. still great fit and location.
Click to expand...
Click to collapse
Does the holder you're referencing allow you to rotate the tilt 2 from portrait to landscape?
DarienA said:
Does the holder you're referencing allow you to rotate the tilt 2 from portrait to landscape?
Click to expand...
Click to collapse
I have the same holder, and yes it does. It also allows you to open the keyboard.
igrip
i have the igrip custom mount for my fuze, i like it a lot, and the mount detaches from the goose neck. they make several mount options that can connect to the custom clip. the have one for my mountain bike, so i can attach it on the trails and use some of the gps features with a program i downloaded here on xda. They also have some more solid mounts that dont move around as much as the goose neck. I am getting a tilt 2 real soon, as soon as my contract is up for upgrade... (next week).. would love to find a custom clip for it that works with the igrip mounting options, has anyone seen one. i dont see a custom clip for the tilt 2 on their website.
igrip
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
actually, just saw this one it looks like the same bracket as the igrip. that I have.
this is the one i have for my fuze
http://www.fuzedepot.com/igrip-custom-flexible-mount/3A78A5370.htm
kmartin888 said:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
actually, just saw this one it looks like the same bracket as the igrip. that I have.
this is the one i have for my fuze
http://www.fuzedepot.com/igrip-custom-flexible-mount/3A78A5370.htm
Click to expand...
Click to collapse
Yeah i had a iGrip for the Fuze as well and i loved it. I am wondering if they say TP2 if they work with the Tilt 2. Im not sure if the specs are exactly the same or i would be buying this one here for sure
Take a look. Anyone know if this works with the tilt 2? I think i posted this earlier too and no one answered
http://cgi.ebay.com/ws/eBayISAPI.dl...964413&ssPageName=STRK:MEWAX:IT#ht_4110wt_939
The one
I think that this one will do it for ya
http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspxhttp://images.google.com/imgres?img...M+Custom&hl=en&safe=off&sa=G&um=1&newwindow=1
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Same
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
I've been looking for the same thing, swivel capabilities is a must. Anyone find a good one?
Get a decent quality universal car mount (with the four prongs) and then just buy a cheap fixation for your Lumia. That way you can keep the mount when you eventually change phones... That's what I've been doing for the last few years...
I've got a telescopic Herbert Richter car mount which looks like it's the same as this one (http://www.ebay.com/itm/iGrip-Herbe...472900?pt=PDA_Accessories&hash=item48454f5744) and I've been very pleased with it. Unlike some of the cheaper ones I've had it has never lost suction and come unstuck. Most eBay sellers who have cheap Lumia 920 car mounts will sell the phone-specific part of their mounts separately for a couple of euros...
Well .. i dont like the universal ones to be honest because the ones i used never where as usfull as expected. will have a loook at the richter one.
Which car charger can you recommend. I am reading a few amazon.co.uk reviews and they are not to pleased with the ones offered
The one I use (and the one that looks like mine that I posted a link for) isn't one of those universal ones that can be adjusted to hold any size of phone... I don't like those ones either... The ones Im talking about just use a four prong system where you can attach phone specific "faceplates" like you can see here http://forum.xda-developers.com/showthread.php?t=683631 so it looks like it's made for the phone you use it with... Sorry, it's not easy to explain but you should be able to get an idea of what I'm talking about.
does your one come with a car charger already?
got different from belkin etc .. just looking for the power part of a car mount now.
will see if i find a universal holder later
hrmm, not sure if we are allowed to post links on here...
anyways, i bought this one http://www.amazon.co.uk/gp/product/B00AEO3U7W/ref=oh_details_o00_s00_i00
took a gamble as there was no reviews, current review is from myself.
Its pretty solid, I tend to always buy ones for the phone as I'm not a big fan of the all in one mounts, and the nokia one i got for my partners 710 is terrible, won't even hold my phone just slips out constantly. I've got a car charger from maplin to go with it that does do a 1000ma charge as my old charger didn't charge the phone enough to keep up with navigon.
Its as solid as some premium brand mounts i've bought in the past, as good as you can get with one suction cup. (imo) how long it lasts is another thing, but for the price I thought it was pretty neat, a friend borrowed it and immediatly ordered one too.
Its very sturdy and the easist phone mount i've used to slip in and out, only thing that did initially put me off is the fit isn't 100% secure, theres very slight movement, i don't think its even 1mm, thought it would rattle but seems fine in the car.
well i just ordered this for my charging:
http://www.amazon.co.uk/gp/product/B002C3AFHG/ref=oh_details_o00_s00_i00
hope you didnt have this one
and i will have a closer look at the amazon offer, thanks
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
NeoGreendawg said:
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
Click to expand...
Click to collapse
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
stead said:
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
Click to expand...
Click to collapse
I've very rarely seen them advertised on their own but if you ask, most eBay sellers who sell the dirt cheap car holders will sell you the phone specific attachment on it's own in my experience and usually for only a couple of euros including postage. Postage must be cheaper in Hong Kong than it is in France... :laugh:
Arkon Slim-Grip Floor Mount SM525-S
FWIW I have been using this model for about 4 years- first with my Tilt2 and now with the Lumia 920 (both without a case and with an Otterbox Defender case as the holder can expand). I had an older version for the Tilt2 which didn't allow for 180deg movement (you couldn't move the phone to landscape position while inside the holder) so when I got the 920 I was able to purchase just the Slim-Grip portion and keep the flexible pedestal part that I already had.
The 4 legs on the Slim-Grip are not permanent- they come in a little bag and you slide them into the body of the phone holder. The move left and right to allow for access to ports on the phone that may not be centered on the phone itself. It also comes with extra legs that are a different shape in case you need a different fitment for your phone (think they are shorter?). The bottom of the Slim-Grip is the part that moves- you push it down with the bottom of your phone and it expands enough to let you then push the top of the phone into the holder so the top legs support it. It isn't obvious from the pictures on Arkon's site at first but you will see a line running across the holder when you look at the pictures and that is where the movement occurs.
I am able to put my phone in the holder with one hand and, because the pedestal part is mounted to one of the passenger seat floor bolts, it's very stable. It's hard to move the pedestal to bend it to different shapes, which is a good thing, because it won't flop all over the place when driving. I can use the 920 without a case in it and with an Otterbox Defender, either way is fine. It allows easy access to the audio and power ports. My friends stick their phones in it too and it holds them just as well (iPhones, Galaxy S3's, Blackberry's etc......).The mount does not impede passenger comfort, however they may not be able to just flop their left leg against the center console because the mount would then be rubbing against the plastic and may leave marks, at least in my Subaru Legacy.
I have used this mount without any problems for close to 5 years now and everyone is jealous of it because it is so secure and convenient. I have no problems recommending it 100%. Good luck.
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Dave-Kay said:
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Click to expand...
Click to collapse
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
BigKuri said:
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
Click to expand...
Click to collapse
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Griffinx said:
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Click to expand...
Click to collapse
They swivel 360 degrees and are very high quality. I've got one in my car that I've also used for my Note II (different holder of course though). It was well worth it IMO.
brodit always had the best ones..
but i read something with "screws" and that made me buy something different for the glas
What did you hear, I'm curious.
Sent from my 920
oh i just found car mounts to be screwed in the cockpit
-adrian- said:
oh i just found car mounts to be screwed in the cockpit
Click to expand...
Click to collapse
Oh OK I understand what you're saying now; I thought you were referring to an issue like the screws scratching the phone or something like that.
I didn't have to screw anything into my dash. I had a mount that clips onto the dash and a holder which is screwed into said mount. Very easy.