Hi
I have a WM5 software file but have no idea how to install to a XDA2. Also went to Buzz site and noticed the Rom's but this iss all new to me.
Could anyone help me with instructions on what to do?
Thanks
Joonoflight
Since you probably downloaded the files from buzzdev.net you could start by reading the file READ_THIS_FIRST.TXT which was included in the download.
Sascha
Windows Installation for XDA IIs
I also have the same queries bout installing the Windows,
It works fine with my XDA II, but now i'm using XDA IIs (with WiFi) and i can't get into white screen (serial or usb mode) even after several attempt of Power + Reset + D-Pad press.
Is it the same way as for both model to press the same buttons
Related
Hi guys I have a o2 XDA II mobile i did unlock it before which i was really happy, now i was trying to upgrade my Rom from the ftp ftp://ftp.xda-developers.com/Himalaya/ROM1.03/ file called: "XdaII_RUU10305ger_o2_de.rar" I have tried to install it then suddenly my device screen just went all black the only words on the screen is USB on top and the bottom says v1.06 .
I have tried to switch off and on took the battery off and on the message stills there dont know what to do i am desperate i think i have ****ed my phone.
Can anyone help please i really need help
ASP
Moved out of general
I dont understand what you saying
sorry my English is very poor. I have tried to hard reset my phone but it doesn't work
If is there someone who could help I would be gratefully
@morenito53
As long as you can see on the screen Serial or USB it's not dead.
Download a good working ROM
I had the same problem last week and downloaded from the FTP Server from the xda-developers the following ROM:
Himalaya_T-Mobile_NL_1.75.903_eDsuBsofT
use an ftp client, and go to folder: /Himalaya/ROM_1.75
It's an English version and running great on my device
Windows Mobile 2003
Rom version 1.75.00WWE
Radio 1.18.00
Hope it will work, saved mine
Hi
i had an imate jamin and i tried to upgrade it to wm6 today. but after i performed a hard reset my device has stucked in the imate blue screen and didnt boot!!!!
i managed to enter the three color bootloader screen by pressing the camera button while restarting the device, then i ran the RUU_Prophet_220734_2207114_024721_NVID but it constantly gives me the error 260 (cannot connect to device).
i am using vista
what can i do now???
please help meeeeeee!!!!!!!!!!!
can you please stop using words like pleaseeeeeeeeee,help meeeeeeeeeeee?
can you please start reading the wiki first?
can you please read the wm6 upgrade guide second ?
if you have done all of the above,did you understand not to upgrade your device under windows vista,and try to do it under windows xp,because wmdc is causing troubles with rom update utility?
thanks for attention.
Heyyyy
I used xp now but still the same problem
can anybody help me???????????
do you have activesync installed on your windows xp?
yes
i have installed activesync 4.5
but
it cant recognise my phone because my phone just cant boot
even when i try the 3 color bootloader screen (soft reset + camera key)!!!!!!!
any advise on how to fix my imate jamin??
To the user with all the Eeeeeeeeeeeeeeeeeeeeeee's...
Try to look into Wiki, like other members have suggested.
Then you might try to use the search functions in this forum.
And maybe after you have tried these options, you could look into similar cases - like for instance this one: http://forum.xda-developers.com/showthread.php?t=337003
for instance...
I am using CE OS 5.2.20753 Build 20753.1.4.0 PV SB on O2 Atom Exec. I am trying to flash my ROM with any of the provided ROMS in this forums rite from WM5 till Jamies latest ROM.
As a background, I have already configured my mobile in VISTA laptop using the MANUALS & RAR files, provided around a year back.
The problem is as follows:
1. I run the package, which internally unzips all the files in C:\Windows\Temp
2. DSUU starts executes and provides a screen to select OS, OS+Extended ROM, OS+Eboot only, etc....
3. I tried using both ALL, OS only, OS+Extended ROM but i get the error as mentioned below.
4. I get a screen which speaks about all the my current RADIO, ROM version and the TO BE new versions.
5. I select OK / Continue.
6. Program reboots my Atom exec and stucks in "USB CONNECTED" black screen. This continues untill i try to manually terminate the DSUU process.
7. To recover from this, I remove the battery manually and insert and start the phone.
8. Phone starts working from the stage where I started flashing with new ROM.
I am totally confused as i tried a lot of ROMS rite rom Wm5, WM6 & WM6.1 which also includes all the ROMS, which i have already used in the past on the same phone.
Gurus, please suggest the possible wayout, as i am stuck on this ROM for a long time and unable to test all these new wonderful ROMS.
ASH
use win xp not vista in flashing roms...
Use the search function, there is an answer to Your question in some of the forums at xda-developers and it is posible to flash roms from VISTA, but after doing some reinstalation on USB drivers and some tweaking....try to find VISTA ROM UPGRADE
My experience is:
I followed the instructions and they worked 2 times and I have flashed the ROM twice, I dont know what happened to my computer because after that never again make it to work in vista.
I whish You Could!
Thanks
Thanks for the suggestions. I have flashed this mobile around more than 20 times out of which atleast 10 times in Vista.
My problem is, after flashing the current ROM, i am unable to flash on this device. i tried flashing other device from the same laptop and it works
When i start the flashing procedure, mobile enters into Boot mode and then nothing happens. i remove battery and mobile boots up with the same old ROM.
Please helppppppp
ASh
Hello,
I am using Windows 7 OS on a Dell Laptop.
I am trying to Flash and replace the Rom on a Toshiba TG01 using, I understand the method needed, but I cant get TG Downloader to recognize my phone. TGtools dosent run at all. (Boots for 3 seconds then turns off) Would someone be able to direct me to some information that would help me run the applications on Windows 7. I checked every threads and cant find any reference.
Thank you
Spiden2099 said:
Hello,
I am using Windows 7 OS on a Dell Laptop.
I am trying to Flash and replace the Rom on a Toshiba TG01 using, I understand the method needed, but I cant get TG Downloader to recognize my phone. TGtools dosent run at all. (Boots for 3 seconds then turns off) Would someone be able to direct me to some information that would help me run the applications on Windows 7. I checked every threads and cant find any reference.
Thank you
Click to expand...
Click to collapse
power off then press and and hold cam button + power= you must get a white LED. If not, you has not a 6.5 Rom with 0321 Radio and you not able to recognize by tg downloader. pls try and post your feedback
Thank you for the suggestion...
But when i follow those instructions, the following things happen:
1. The screen blinks,
2. The Brand Logo Screen stays for a about 2 min.
3. Windows 6.5 loads normally...
I guess I have the wrong Rom, and only the SD card method would work.
Spiden2099 said:
Thank you for the suggestion...
But when i follow those instructions, the following things happen:
1. The screen blinks,
2. The Brand Logo Screen stays for a about 2 min.
3. Windows 6.5 loads normally...
I guess I have the wrong Rom, and only the SD card method would work.
Click to expand...
Click to collapse
wron ROM 100% you need firs flash standard wm6.5 this: miRom 7 radio 0321 as .tsw (if is not rename it to tg01wp_00.tsw)
Hello my friends! how are you? i have a big problem with my vodafone smart ii and i need your help!!! My girlfriend try to restore it because of a problem and now the screen stacks at the green robot android! i havent check the boxes for the usb permissions you know if someone want to root it you have to check some boxes first as i remember!!! i try the restore console but nothing, i also have a programm from roddie thats fixes everything automaticaly but it stack in the search of the device...! i also have the usb drivers for it but there are no install files just some files and i dont know how to use them on the pc! what i can do now?
OK
Obviously you are new too. I had no idea what to do too the first time i bricked my phone like one and a half month ago...
Try searching the forum and experiment with your phone...
I don't understand completely what is your problem as I am new too but a simple solution could be this...
check if the drivers are installed correctly on your pc (if not search the forum for them, I can't recall in which post but a user uploaded them) and then try flashing the rom that roeddie gives(except of the recovery.img it's nonfunctional ) using this program Android_AIO_Flasher (search for it on the forum)
Edit: in order to flash the new img files you need to be in fastboot mode (press volume down continuously while powering on)
Go to
roeddie.blogspot.com
Ota update 3
U will find there The Solution !
Enjoy
Sent from my Vodafone Smart II using Tapatalk 2