I bought a "Bluetooth GPS Receiver" and tried to connect it to my T-Mobile MDA II for my Tom Tom Navigator 5 for Pocket_PC. I had a difficulties for having connections and receiving information thru bluetooth. I read the MDA II manual and I need to accept the connection from GPS receiver and its seems's simple but I can't have any access and find any Bluetooth Manager nor Bluetooth Wizard from my MDA II. I have installed my Tom Tom navigator already but I cannot use it because of the connection between my MDA II and GPS thru Bluetooth.
Can someone help me out with this difficulties? I highly appreciate any response with this subject. I thank you in advance.
Kind regards,
Jhake
Related
I`ve serious problem to connect gps receiver (holux gm-210) to mda. adapter is dedicated to mda led in mouse is blinking, etc. but any software can`t see the gps receiver (can`t communicate with him in any com port). where the problem can be ?
mike
I too have same problem, but when I connect my friends Tom Tom GPS is works !! I then disconnect Tom Tom Gps and Connect my Holux GM-21 and that works, but if you soft reset XDA then Holux GPS is not working again.
Please someone help or give links to help.
regards
Lee
Have you turn the IrDA off first ? Check the "data exchange" in the connection page.
IrDA will occupy the COM1..
Hello,
For one week now, I'm trying to connect my MDA II with a bluetooth carkit. This doesn't work 'till now. The main reason is the missing profile in the bluetooth driver. The MDA supports a lot of profiles, but not the handsfree or cordless tephony profile, wich is needed to communicate to carkits (and more and more headsets too).
Are there more people having this problem and does anybody know if there is an update of the bluetooth driver available?
Menno
The MDA II does not support the handsfree profile, and there is no add-on software that provides this functionality.
However, there are some handsfree sets that can use the headset profile (which is implemented in the MDA II). An example is the Parrot handsfree unit.
If your handsfree set does not support the headset profile, I'm afraid you're out of luck...
Cheers
Daniel
mbernard said:
Hello,
For one week now, I'm trying to connect my MDA II with a bluetooth carkit. This doesn't work 'till now. The main reason is the missing profile in the bluetooth driver. The MDA supports a lot of profiles, but not the handsfree or cordless tephony profile, wich is needed to communicate to carkits (and more and more headsets too).
Are there more people having this problem and does anybody know if there is an update of the bluetooth driver available?
Menno
Click to expand...
Click to collapse
Look at this site. Its in german. This link is recommended by Royaltek in it's FAQ, then the Royaltek BlueGPSMouse BT 3000 doesnt work with the Royaltek-Driver and MDA. I installed the driver from this site on my MDA II and now I have the contact with the mouse. At first, uninstall the old driver!
http://bluetooth.i-networx.de/
widder said:
Look at this site. Its in german. This link is recommended by Royaltek in it's FAQ, then the Royaltek BlueGPSMouse BT 3000 doesnt work with the Royaltek-Driver and MDA. I installed the driver from this site on my MDA II and now I have the contact with the mouse. At first, uninstall the old driver!
http://bluetooth.i-networx.de/
Click to expand...
Click to collapse
The software on this site implements a proper serial profile. It doesn't help with handsfree at all, unfortunately.
Cheers
Daniel
Daniel (and Widder),
Thx very much for your replies. I've already have contact with T-Mobile Netherlands with the question to deliver a driver for the handsfree profile. I'm still waiting on a reply.
The Parrot is indeed supporting both profiles. I will try the CK 3000. Do you have experience with this unit?
Regards,
Menno
Hi guys,
I've been using the 1.72 ROM for a couple of weeks now and I must say it is the most stable ROM since I've my MDA II. The radio on/off works like a charm and so does the bluetooth. But.....
I use TomTom Navigator 3 with an Emtac bluetooth GPS. It works fine with this ROM but I can't use TomTom anymore without the Emtac bluetooth GPS. What I mean is: Before this ROM I would sometimes open up TomTom to look something up on the map. This would be with bluetooth turned off and my GPS would be somewere else. Now with this 1.72 ROM and the Bluetooth Tools in it, I can't do this anymore. My MDA II will slow down in opening TomTom and will then freeze. It needs a soft reset to get out of this stage. This is very repeatable. I think it has to do with the bluetooth tools in the ROM.
So my questions are:
1. Does any of you guys have the same problem with a bluetooth GPS?
2. Can I do a hard reset and not let this bluetooth tools be installed and still get my bluetooth GPS working?
I hope any of you knows the answer to this (minor) problem.
Thanks!
Wouter
are you using the latest version of the tomtom gps driver, I had this problem on my old IPAQ 3970. but everything works fine on my XDA with 1.72 and bluetooth tools
I use the very, very latest GPS driver. So you can't reproduce that problem with a bluetooth gps mouse?
Wouter
I have a GlobalSat GPS mouse and it works fine.
Jon
I also have the latest GPS driver with the TomTom Wireless (Bluetooth) GPS mouse and works without any problem
Hi Xzanix,
Just to be sure if I just have bad luck. You can open the map in TomTom and look something up without the bluetooth GPS turned on? (I just want to be sure....)
Thanks,
Wouter
:lol: :lol: :lol:
Hi guys,
This thread can be closed. I solved the problem!
I tell you what I did. I had in the GPS settings choosen for COM5 because I had that one activated in the Bluetooth Tools. This was how TT did work but didn't work with no GPS turned on.
Now I turned Bluetooth Tools off and choose for Bluetooth GPS in the GPS settings. Now it works how it is supposed and I can still look something up on the map without my bluetooth GPS turned on.
I'm so happy! :lol:
Wouter
Cool 8) Was just compiling a reply Nice to read you've solved your issue
Well, thanks for your effort!
:lol:
Wouter
Hi,
I have recently upgraded to an XDA2s from an XDA2. All my software runs fine with the exception of one clash. My Tomtom 3 software prevents the bluetooth from connecting with anything. If I do a build without Tomtom, the bluetooth works fine.
The GPS unit isn't bluetooth, its a wired one.
The bluetooth headset is compatible with the XDA2s and works.
Has anyone seen this/Fixed it?
I'm having to keep 2 backups on the go, one with Tomtom and one without. Ideally I'd like to not have to do this
All ideas most welcome. Thanks in advance for your assistance.
UPDATE : I have upgraded my radio to version 6.10 and my bluetooth drivers to 3900. The bluetooth is much better now but Tomtom still interrupts it.
i am having a problem connecting to both recievers (royaltek rgt-1000 and Leadtek Wireless GPS Reciever)
I am trying to get them to work with my Wizard (t-mobile Vario)
but i am not getting anywhere.......HELP.......... i can put the in and outgoing ports on the bluetooth thingy as com6 and com7 but in the tom tom i can not even see those.................HELP!!!!!!!!
Sounds like you are running TT5 without the 5.21 update, this sorts that problem