Hi Zendrui,
Don't know why. but I cannot set anything, since nothing happens, when I tab Settings button or Settings from the tray-icon or at Options-button in Today.
For a short time the wait cursor comes up - but then nothing...
Can you help?
Well, maybe you should backup all data and hard reset your device...
Check here seems to help a little on some devices
PZP 5.5 WM5.0
Related
I've done a search on this forum but haven't found this problem listed exactly.
All of the sudden, the icons in setting are gone! Mainly the same ones, backlight, power, HTC X-button, Device Info, etc etc. I have to soft reset to get the icons back but then after some time, they are gone again.
I am running BD3.5. Anyone have a clue why this is happening and how to fix it?
TIA
No one else has this problem?
Has happened to me before on certain ROMs I've run in the past. Appears to be a memory management issue. Always happened after a few days use and a soft reset always solved it. So far, I haven't seen it on vp3G's version of the last LVSW ROM.
Try uninstalling the HTC X button and then power off and on, then soft reset, might cure it.
anubus12 said:
I've done a search on this forum but haven't found this problem listed exactly.
All of the sudden, the icons in setting are gone! Mainly the same ones, backlight, power, HTC X-button, Device Info, etc etc. I have to soft reset to get the icons back but then after some time, they are gone again.
I am running BD3.5. Anyone have a clue why this is happening and how to fix it?
TIA
Click to expand...
Click to collapse
Not sure if anyone can give some advice on this...
If the battery goes dead or if for some reason the phone has to start up,
It goes back to inital config!! - ie: - tap screen to start, set up the phone etc...
all apps, settings etc have gone, as if its a new phone!!
Its highly frustrating and wondered if anyone can help.....
thanks
......just wondering, does the phone have a small battery that keeps its memory??
maybe that needs changing??
Try a hard reset.
how do I do a hard reset?
thanks
is this right??........
# remove the battery cover.
# observe that by the USB port, there is a small indentation. This is the reset switch access.
# Keep the slider closed.
# power the phone on.
# press the “talk” and “end” buttons; while holding them down, use the stylus to probe into the reset switch hole at a 45 degree angle to the major axis of the phone.
# when you get to the “press enter to reset the phone” page, press the center dpad
yep, thats right
didnt work,
when I reset or battery dies etc. It reboots back, as if its a new flash....
have you tried changing the radio and/or the rom?
andy_dutch said:
Not sure if anyone can give some advice on this...
If the battery goes dead or if for some reason the phone has to start up,
It goes back to inital config!! - ie: - tap screen to start, set up the phone etc...
all apps, settings etc have gone, as if its a new phone!!
Its highly frustrating and wondered if anyone can help.....
thanks
Click to expand...
Click to collapse
I Had exactly the same problem
I tryed all the 6.5 rom in this forum and the problem continues
i also tryed changing the radio.
I tryed a 6.1 rom and get the same rhing.
The only solution was flashing the original rom from htc
There is some strange error in this new roms.
I have the same problem!!
Now I have the Salvy C83 v3.3 rom on my Touch dual...
JMD2006 said:
I have the same problem!!
Now I have the Salvy C83 v3.3 rom on my Touch dual...
Click to expand...
Click to collapse
The only way to get the phone running again was to install the original htc rom
And it has to be this one:
http://www.4shared.com/account/file..._13171012_Radio_Nike_1582123_signed_Ship.html
Thanks for the solution, now it works.
noticed the wifi will disconnect after a short period when the screen turns off
i dont want my wifi to stay connected all the time but it would be handy if i could extend this timeout to maybe 5mins or something
anyone know if it can be done?
did you try bandswitch?
no, i prefer reg tweaks... installing apps just seems to make the phone unreliable
but i will try it anyway, thanks
you want
hklm - comm - bcmsddhd1 - parms -htckeepwifionwhenunattended
change the value to 1 and wifi wont disconnect.
I dont know if you can alter the timeout.....
the setting will need to be reapplied after a soft reset though.
touch tools will do it permanently.
hope that helps....
ooh, interesting...
have also found SuspendOffDelayInterval
will test and see if it changes anything
yes, seems to work for me, value in:
\HKLM\Comm\BCMSDDHD1\Parms\SuspendOffDelayInterval
seems to be the delay in ms, so default 30,000 = 30 sec, i just added another zero to make it 300,000 or 5mins.
that's good to know.....
im quite happy with mine on all the time but im sure someone else will find that useful
does that change survive after a soft reset?
seems to yea
Hello everyone,
First of all, I hope this is the right corner and I've collected enough information - I couldn't find anything closely related to my issue.
Now, I've got the first big problem:
Regarding the support of Tablet devices, some apps just don't offer any possibilty to install them. Now, to avoid this problem, I've changed the LCD density to 240dpi.
The Prime is still able to boot normally and everything is working just fine - except for the Launcher: It crashes every 2 seconds and the buttons on the bottom of the screen are cut away just like the one for the app menu in the upper right section so that I've only reached the settings by some tricks so far.
So far, I own my Prime for roughly 1 1/2 months, my Prime is rooted, NOT unlocked and has the most up-to-date firmware installed on it.
Up to now, I tried to factory reset via settings and wipe data with Volume Down + Power button combo.
Apart from that, I think I heard that the dpi settings are to be found in the build.prop file.
Sorry for letting you read this much, but I think this reduces the overall time to spend on it.
I hope that it's possible to get it back working. I miss the Prime experience
Thanks in advance for any help!
Solved!
So, after some hours, I managed to get the Prime back to life by myself:
The build.prop file was the key to success; With some actions in the ADB-Interface and permission changes, it's possible to revert a bad dpi value to default via USB debugging.
If anyone's further interested, I'll try my best to explain how exactly it's working.
hello,
newbee here. I have acquire a sansung galaxy S2, and have a lot of fun with it.
trouble started when it rebooted at night. I figured out that some update or application crashes were the cause of it.
I think i rid of most of the issues, and got it pretty stable.
To avoid future complication, I even rid of the startup sound, but I can not rid off the vibration (especially the one when shutting down....)
I think it is part of the basic settings, and I did a lot of researches... no luck
Apps like Silent boot would not work either....
Do anyone know if it's even possible ?
If impossible, is ICS having the same issue, or can this be tuned ?
(i just can't believe no one thought of making that optional ...)
Please help me...
I'm on ICS and don't have that. It is part of system settings - sound. It usually is affected by the mode you have your phone set to (like if you have sound set to Sound and Vibrate or just Vibrate, etc). Try changing to just sound and see if that stops it from vibrating (or just silent mode with no vibrate).
Can also try to untick Vibrate on screen tap.
ICS is sweet... can't go back to GB... what you waiting for?!
Sorry, but this does not work (phone is rooted)
. tried vibration off no luck
. tried silent mode no luck
Is there someone who knows where is configured the vibration settings ?
I mean in which filesystem (full path if possible) ... ?
note: Official Samsung ICS for Unlocked Phones will come soon... unless there is a safe ROM and method to install it. For now I would concentrate on my Vibration issue.
Firstly, be patient. People will try to help you, doesn't mean the first answer fixes your problem.
As I stated... ICS does not have this problem. Phone makes no sound and no vibrate, if you set it that way on ICS.
How about give us more information. You said you're rooted but on GB. Are you using any different type of kernel other than stock? Like Siyah 2.xx?
As the filesystem where you can doodle with removing vibrations... I will leave someone with more experience to deal with that (even if I know the path)... in case I advise you something that can screw things up after.
*you might want to reset the phone - as the system notification/vibration settings should have done the trick.
hello
I upgraded to 4 versions of ICS.
Each one of them did not correct the issue : it still vibrate when shutting down the phone. (darkyrom, OCA, Pure and a "4.0.4" version having a clever 3 way option to launch (Nova, TW and Apex)).
I did not reset the settings yet but I will give it a go.
I will the thread updated.
That's a very strange bug then. The settings to control that though, is not with the launchers but with System Settings.
Maybe try this:
System Settings - Volume <inside there you have 4 settings. Try changing System to very low or all the way off. Then go to the whatever mode you have it set to (like Silent Mode or whatever)... and select Mute.
Then the lower categories of System... uncheck all of them: Keytones, Touch sounds, Screen lock sound, Vibrate on screen tap.
See if that works. If it does, then can narrow it down to one of those settings.
Thank you very much
The simplest things are not always obvious to the common....
It works, the vibration disappeared when /SOUNDS/VIBRATION SETTINGS/Vibrate on touch was set to the lowest. Meantime, the little vibration at startup disappeared as well. Now the phone can crash, update and reboot at night without waking me up ! .. a good logcat reader (just in case) running in background will help cleaning up when some error occurs....
Once again, thank you: that drove me mad.
Glad that worked. You're right, sometimes the simplest things are not always obvious, for everyone ;-)
LeFrog1310 said:
Thank you very much
The simplest things are not always obvious to the common....
It works, the vibration disappeared when /SOUNDS/VIBRATION SETTINGS/Vibrate on touch was set to the lowest. Meantime, the little vibration at startup disappeared as well. Now the phone can crash, update and reboot at night without waking me up ! .. a good logcat reader (just in case) running in background will help cleaning up when some error occurs....
Once again, thank you: that drove me mad.
Click to expand...
Click to collapse
I have chinese copy of Nexus One phone, android 2.2.1 and I don`t have VIBRATION SETTINGS tab in my menu, I can only turn vibrate on and off,
and I don`t have SOUNDS on SETINGS, I enter in AUDIO PROFILES to menage vibration,
how to turn off vibration on power on and off?