questons about windows mobile 2005 - MDA II, XDA II, 2060 ROM Development

hi dear
this is my 1st post and i'll try not to make it messy
i have an imate pocket pc ( i'm not sure what do u call it )
with windows 2003 , 1.72 loader version
i got it from the gulf area so there were no ( providers , or country codes ) on it
few days back i heard about the windows 2005 mobile version and wanted to try it
i went to an arabic forum who were discriptive about the steps , unfortunetly it didn't work for me , after i finished the update 1st time it looked great , but needed to downgrade because my skyscape didn't work
i finished the downgrade , but guys the wm2005 was tempting , so i tried upgrading again, unfortunetly again , after it finishes updating and ask me for hard reset , the blue screen stucks up even without back light , a moment later the blue light flashes and nothing goes anywhere from there.
can u help me with this problem
thanx

no replies yet
may b t z a difficult one 4 u guyz?

Why don't you have a look at buzzdev.net and find for some answers there. Buzz is specialized in WM2005 for XDA2.

Related

WM2003SE or WM2K5 for Imate 2020

Hi All.
I need to update the ROM of my Bro's Imate 2020 ( Splash Screen is I-mate ).
I browsed this forum and found many files and many combinaitions.All the work done by You guys is appreciated. Keep on
I need a single file that includes everything: the Radio,The OS and everything and It should includes the "HimaUpgradeUt_noID" coz I dont want to get the Country Error or ID error... Im not a Pro in dealing with problems concerning PDA's..I just want it as simple.
Few Days, I got a link by Pug (many thanks) and Flashed my O2XDAIIi with no problem.
So,If someone can lead me to the link where the latest ROM (all in one ) WM2003SE or WM2K5 are, I'll be greathful.
I perhaps didnt see it while browsing, but the reality that I have a cold and Im not concentrating well
Thanks in advance

Big WM6 clock in today screen + Answer Machine Software in O2 Stralth

Hi all,
1- I have an O2 life running on (WM6_WWE_RC2140907B2), just upgraded yesterday. Strange enough, I don't see this fancy big clock on all WM6 devices, besides it hanged 3 times already.
2- I used to have an O2 stealth, it has a very nice answer machine software, i tried looking it up in the ROM files but I ouldn't. I also downloaded the "Upgrade Utility" from O2 and searched for the .cab file, that also didn't work.
Any ideas ???
I think its the HTC HOME plugin you are talking about -
Here's the link
Thanks udayrulz. Can that be used in wm5 as well??
What about the answer machine thingy ??
bro...this can be use in xda atom exec???
Should work on WM 5 and Atom exec too
You can also download the HOME CUSTOMISER if you want
bndr1980 ,i ll look for the stealth software and post here if i find anything
Thanks udayrulz !!!
I already managed to go back to wm5, as wm6 keep on hanging all the time. So I gave it a go and installed it ... and the results were fantastico ... the device frooze like dead.
Rather than blaming me , why dont u just use a bit of your head and uninstall the program
I am not blaming you mate !!! where did you get that idea from ???
I was anonyed by wm6 not by the program in the first place? besides the device froze when on wm6 not wm5. Cheer up mate !!!
Sorry mate! , i got it wrong my bad
Any luck with the answer machine guys ???!!!!!
Why I Secretary can’t mute the microphone of my xperia x1 and why the caller can’t hear my answer message
How can I fix this using registry or any tweak tool for windows mobile 6.1
thanks

Qtek 2020 ... Needs to be tuned .. HELP !!

Hello every body .. look i guess am all new to the pocket pc's stuff ... and i really need an upgrade to my PPC ... its actually running on WM3 .. and i need to upgrade it to WM5 !! i really need somebody to tell me the right way to do so ...
i saw different ways ... but i just dont knw what do ... frankly am kind of afraid to take a step ... Plzz Help me ...
and btw i've downloaded the WM5 rom ... its on my pc nw .. i just dont knw what to do with it ... and whats the safest way to Upgrade ...
and 1 last thing .. can i restore to WM3 once again if i didnt like the WM5 ?
Thanx in advance
In each ROM you download there should be a text file readme giving you instructions on what to do. Basicaly, put the device in bootloader mode, connect to Active Sync and run the ROM Upgrade Utility included with the image. Based on my own experience it will take about 30-45 minutes from start to finish.
Lots of ROMs to try for tthe Himalaya, try them all and see which one you like the best.
Latest WM2003 ROM from the O2 Ireland site can be found here.
Just remember that a new ROM will totally wipe your Himalaya so make sur eyou have anything important backed up first.

Help Please......!!! P3400 (old Gene) stuck at bootloader...!!!

--------------------------------------------------------------------------------
hi...
please someone help me,
today i upgraded to a new wm6.1 Rom for HTC P3400 which was posted in gene forum here at XDA Developers , after successful upgrade my phone restarted n got stuck at bootloader.
i hv tried almost every solution avaible at Forum XDA developers, but still same condition.
i hv hard reset it several times, also gave unsuccessful try to Mtty , and gene unbreak.
please someone tell me how to unbreak my device, becuz i hv gone through almost every solution, but nothing working.
ther is solution for newer genes in "Gene Forum" but tht also not workin on my old gene.
and please tell me that can i send it to HTC india, as it is still under warrenty.
i m afraid that they wont repair it as i was using custom wm 6.1 roms
so please somebody help me out. i m really in grt tension....
DUDE YOU WANT TO TROUBLESHOOT AND STILL NOT POSTING ANY INFO ABOUT YOUR PHONE? WHATS WRONG WITH YOU?
Sorry for the caps, but Please post ONBL, SPL etc if possible
then only a solution can be derived. Post everything that you can remember aboout your phone as well as what is written on the sticker at the bottom of the packaging box of your phone.
And please dont post full serial no, only the first 3 numbers like HT8xxx or HT7xxx etc.
See you.
krazy_about_technology said:
DUDE YOU WANT TO TROUBLESHOOT AND STILL NOT POSTING ANY INFO ABOUT YOUR PHONE? WHATS WRONG WITH YOU?
Sorry for the caps, but Please post ONBL, SPL etc if possible
then only a solution can be derived. Post everything that you can remember aboout your phone as well as what is written on the sticker at the bottom of the packaging box of your phone.
And please dont post full serial no, only the first 3 numbers like HT8xxx or HT7xxx etc.
See you.
Click to expand...
Click to collapse
dear frnd sorry for my mistake....
my phones serial no is starting like HT807XXXXXX
but its not P3400i, its was having WM5 by default
even hving HT8XX serial i was successfully using all the ROMs Including fusion, PDAViet etc etc, ther was no problem
but problem started when i upgraded my phone to WM6.1 Stock ROM
http://forum.xda-developers.com/showthread.php?t=461351
i think this ROM is provided by u.
it was shown that rom is for devices with serial HT8XX,
so my phone is also HT8XX, thn i gave it a try, upgrade was successful,
but after ungrade device rebooted and my phone got stuck at bootloader only.
Showing info like this..
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.79.90
OS 1.7.0.0
AND my 1st boot screen is also changed since i upgraded to PDAViet rom
so is ther any way to restore original HTC white logo bootscreen.
hey i think this is just an old gene with HT8XX serial, becuz all the Roms were working good.
and for the 1st time i upgraded to Rom for HT8XX and my phone got bricked.
hey please............................................... help me out
and lemme know if u want any other info abt phone.
i m online most of the day, so please reply as soon as possible....
hksin1988 said:
dear frnd sorry for my mistake....
my phones serial no is starting like HT807XXXXXX
but its not P3400i, its was having WM5 by default
even hving HT8XX serial i was successfully using all the ROMs Including fusion, PDAViet etc etc, ther was no problem
but problem started when i upgraded my phone to WM6.1 Stock ROM
http://forum.xda-developers.com/showthread.php?t=461351
i think this ROM is provided by u.
it was shown that rom is for devices with serial HT8XX,
so my phone is also HT8XX, thn i gave it a try, upgrade was successful,
but after ungrade device rebooted and my phone got stuck at bootloader only.
Showing info like this..
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.79.90
OS 1.7.0.0
AND my 1st boot screen is also changed since i upgraded to PDAViet rom
so is ther any way to restore original HTC white logo bootscreen.
hey i think this is just an old gene with HT8XX serial, becuz all the Roms were working good.
and for the 1st time i upgraded to Rom for HT8XX and my phone got bricked.
hey please............................................... help me out
and lemme know if u want any other info abt phone.
i m online most of the day, so please reply as soon as possible....
Click to expand...
Click to collapse
Just flash it with WM6 Original ROM (India) guys, I don't see much improvements in WM6.1, and your SPL is original. Do it in the BootLoader Screen, and flash it via RUU.
npiyanut said:
Just flash it with WM6 Original ROM (India) guys, I don't see much improvements in WM6.1, and your SPL is original. Do it in the BootLoader Screen, and flash it via RUU.
Click to expand...
Click to collapse
hey i tried upgrading to original wm6 but it always shows error at 2%, "Invalid Vendor ID" n my phone gets restart.
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
krazy_about_technology said:
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
Click to expand...
Click to collapse
I tried upgrading to stock WM5 Rom given here
http://forum.xda-developers.com/showthread.php?t=382063
but while ungrading it is showing Invalid Vendor ID, and my phone is getting restart ...
so ,,,,,, is ther anyway to hspl my phone or something ???
and i also tried this WM5 Rom also
http://forum.xda-developers.com/showthread.php?t=375553
but still......invalid vandor ID at 2%
nd...no progress..........!!!!
3 days...without phone....its just like hell !!!
hksin1988 said:
and i also tried this WM5 Rom also
http://forum.xda-developers.com/showthread.php?t=375553
but still......invalid vandor ID at 2%
nd...no progress..........!!!!
3 days...without phone....its just like hell !!!
Click to expand...
Click to collapse
Bro "
Feeling very sad for your Phone.
Can you give me the screen shot where you stuck?
I know u provided all necessary Info ,but pls it may help me out.
Take a snap of your phone screen with another phone and upload it.
I flashed that rom that u have flashed (WM6.1 stock rom mirrored by crazy_about_tech.) and mine also stuck in boot loader,
but immediately just flash back Fusion 9 and my phone alive again.
Please don't blame anyone for anything.
Here, all are together for helping each other and sharing their PDA experiences not making anyone's phone DEAD.
rakesh_4utoo said:
Bro "
Feeling very sad for your Phone.
Can you give me the screen shot where you stuck?
I know u provided all necessary Info ,but pls it may help me out.
Take a snap of your phone screen with another phone and upload it.
I flashed that rom that u have flashed (WM6.1 stock rom mirrored by crazy_about_tech.) and mine also stuck in boot loader,
but immediately just flash back Fusion 9 and my phone alive again.
Please don't blame anyone for anything.
Here, all are together for helping each other and sharing their PDA experiences not making anyone's phone DEAD.
Click to expand...
Click to collapse
First of all....i m so sorry for my behaviour....if anyone felt bad.....100times sorry..and i m blaming No one.....
even i m very happy to be a member so such a great forum....which gave me good knowledge all the time.....
anyways.......here r some screen shot wher i my phone is stuck...
please ask me...if any more info needed.....please guys,,,,help me out here....
m very stressed....
How to remove Smart Mobility Boot Screen
Hey Guys please also tell me that how can i remove this Smart Mobility Boot Screen and revert back to Old HTC logo White screen...
any solution ???
Looks like you need to do a hard-spl again before you flash another ROM.
Try orefcov method here
ramersonw said:
Looks like you need to do a hard-spl again before you flash another ROM.
Try orefcov method here
Click to expand...
Click to collapse
i hv already given this a try.....but ended up getting error all the time.....
i tried Mtty i dont know how many times but in last the error comes
and one more thing.....tht unbrick solution is for P3400i and newer GENEs (HT 8XX), even my phone's serial no starts frm HT8XXX, although it is old version.....ONPL is 1.07.0.0 ...
while in newer genes it is 1.10.0.0 n more
so this solution wont apply on mine...
BUT Still i gave it a try.......not workin for me...
hksin1988 said:
First of all....i m so sorry for my behaviour....if anyone felt bad.....100times sorry..and i m blaming No one.....
even i m very happy to be a member so such a great forum....which gave me good knowledge all the time.....
anyways.......here r some screen shot wher i my phone is stuck...
please ask me...if any more info needed.....please guys,,,,help me out here....
m very stressed....
Click to expand...
Click to collapse
Oh ,earlier you were using wm 6.1 by PhamQuang ,that's why your splash screen changed but this is not a big issue,Once your phone alive again this can be solved in minutes,
Try this(I don't know you tried it or not)
plug ur phone to PC and reset ur phone keeping the camera and the power button pressed.
If you see the tricolor screen with a Text USB in left bottom corner of your phone, leave the buttons or try again ,Once tricolor screen appears then only you can flash your original Wm5 (24 march 2007.exe) because your SPL is original till now.
http://forum.xda-developers.com/showthread.php?t=382063
try it.
rakesh_4utoo said:
Oh ,earlier you were using wm 6.1 by PhamQuang ,that's why your splash screen changed but this is not a big issue,Once your phone alive again this can be solved in minutes,
Try this(I don't know you tried it or not)
plug ur phone to PC and reset ur phone keeping the camera and the power button pressed.
If you see the tricolor screen with a Text USB in left bottom corner of your phone, leave the buttons or try again ,Once tricolor screen appears then only you can flash your original Wm5 (24 march 2007.exe) because your SPL is original till now.
http://forum.xda-developers.com/showthread.php?t=382063
try it.
Click to expand...
Click to collapse
Yes sir.....i hv already tried it......
i did the same........enter in bootloader..the tricolor screen....atteched to USB....in phone it was also showing the text USB in left corner..
than i tried to flash original WM5 rom (24 march 2007) ......but alas.....the same problem......error at 2% sayin "Invalid Vendor ID"
hksin1988 said:
Yes sir.....i hv already tried it......
i did the same........enter in bootloader..the tricolor screen....atteched to USB....in phone it was also showing the text USB in left corner..
than i tried to flash original WM5 rom (24 march 2007) ......but alas.....the same problem......error at 2% sayin "Invalid Vendor ID"
Click to expand...
Click to collapse
Your Splash screen also may made ur phone's warranty void.This is a big problem.let me think for a day.
My phone's Sn is HT7XXXX
rakesh_4utoo said:
Your Splash screen also may made ur phone's warranty void.This is a big problem.let me think for a day.
My phone's Sn is HT7XXXX
Click to expand...
Click to collapse
yea dear...think something................i m very thankful to u....tht u r takin interest in my problem.....
Finally Gene is alive......thanks to HTC service centre..
Finally i gave my phone to HTC service centre...and...ther made my gene alive once again...
Now m very happy now...!!!
i would like to thank every XDA forum member for helping me out and givin me response.
i mistakenly flashed wm6.1 stock rom which was for HTC P3400i and newer P3400, so my phone got stuck at bootloader.
i tried almost each n every solution avaible here at XDA forum , but nothing helped me out.
as each time it was showing me error in flashing back to original ROM.
finally i gave up and decided to give my phone to HTC service centre since it was under warrenty...
so...now my phone is OK....it has original wm5 once again.,,,
and i will flash to Fusion 9.0 rom tonight.....

Problem Flashing from WM to WM6.1

first of all im new to wm
Qtek S200
running on wm5
i have windows 7 32-bit
i did read many things
please i know there is alot of how to
but i need somone to guide me personaly
like msn or skype chat please
and i dont know wich rom to get or from where
i already downloaded a 6.1 rom and tried so many times
1:had activsync issu (solved)
2:about the spl there is SPL 2.200.001 on my device i read this on the boot screen
wating for a rply
that's my main issu
YYYYYYYYYYY DOWN HERE YYYYYYYYYYY
about the RUU always giving me error
program has stoped and i have to close it
is there is anyway to flash from SD card ?
badboyilprimo said:
first of all im new to wm
Qtek S200
running on wm5
i have windows 7 32-bit
i did read many things
please i know there is alot of how to
but i need somone to guide me personaly
like msn or skype chat please
and i dont know wich rom to get or from where
i already downloaded a 6.1 rom and tried so many times
1:had activsync issu (solved)
2:about the spl there is SPL 2.200.001 on my device i read this on the boot screen
wating for a rply
that's my main issu
YYYYYYYYYYY DOWN HERE YYYYYYYYYYY
Click to expand...
Click to collapse
You have a G4 device, so the picture send by you is a tipycal problem when you don't check Vista/W7 option. Read all posts from Prophet_Upgrade tool, your problem was discused some time ago there... Prophet device can't be upgraded from sd card, it need special SPL to support this. Please read until start a new thread!!!!
i used xp and i flashed with 2 kinds of rom's on urs and other one i have g4 device
but now im stuck at rgb screeen what shud i do

Categories

Resources