I keep getting an error message saying "unrecognized card in Socket 1" and asks me to enter the location to card driver, this happens with ever restart "soft reset", where is this "socket 1 " and how i can stop this message??!!! help!
Maybe your problem is not with your equipment but with your sd-card, i said that because i´ve already to change in garantie one of the sd-card and it gives the same message to me.
Hope i´ve helped you... :roll:
well, it worth trying, although the device also gives this message without any card installed! Thanx for ur help man
King_hatem said:
well, it worth trying, although the device also gives this message without any card installed! Thanx for ur help man
Click to expand...
Click to collapse
I have the same problem with my xda. Flash rom with sd card - everything OK, but it's show this message when I turned on my xda. :evil: :evil: .
"The message show without any card installed" because the SD card have a pin in the side of "lock swich" on SD card. This pin is conected when No card in socket and disconected when you inserted a card.
How to fix this problem:
1. Open the back cover of the xda.
2. Open the cover of the sd slot.
3. Check the contact of the pin beside the lock swich, it maybe in bad contact.
I'll post the picture about it later.
But the message "Unknown card in socket 1" still appear when a card inserted. :evil: :evil: :evil:
unknown card error with qtek 1010
I was having this problem also
I was using a mini sd card in its adapter for my 1010
and when im inserting the adapter with no minisd inside, there shown the error..
and usually i ignores the error and nothing happens..
it seems the error is kinda harmless
Related
StarTrek SD Card flashing
It is necessary to format your microsd card to FAT32 filesystem!
# Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it in fat32 from your computer using a card reader (in some cases format doesn't work).
# Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / ~MacOS use [cabextract | http://www.kyz.uklinux.net/cabextract.php].
# Rename the .NBH file to *STARIMG.nbh* and copy it to the root folder of your microSD card.
# With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Record button and Camera button at the same time).
# You should see the screen with SD Card searching, then confirm flashing on screen by pressing Softkey.
# Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 25 minutes, so check your battery or connect to charger before the flashing process starts.
~SuperCID devices are able to flash any official NBH image using this method.
Yes it works ... but ... edit NBH files doesnt work too with this methode!!!
edit NBH files doesn't work at all. Because of there is no known method to create properly signed NBH for StarTrek.
i think that 1024 is right signature size, but it is incorrectly signes with any known nbh creating tool
Qtek 8500 dead
I tried to use RUU_STAR100_3.6.252.1_02.67.30_QtekNOR_Ship.exe to upgrade to the latest ROM, but upgrade process was interrupted (reported a communication error about 40% into the process); I was not able to recover via the tool.
The phone only shows the three colour bootloader screen now, with IPL and SPL 3.06.0000.
I tried the SD upgrade method described on this page, but while the phone during power-on process very briefly shows a white screen with "searching for SD card", it only comes back on the 3 colour screen and remains "dead".
Any tips on how I can revive the phone?
when your phone in tri-colour (bootloader) mode, reconnect it to PC, and run upgrade via RUU_STAR100_3.6.252.1_02.67.30_QtekNOR_Ship.exe again
PS. You phone isn't dead)
Qtek 8500 still dead
Thanks for the quick reply Erofish.
I tried the suggested step already, but it fails because the ActiveSync no longer gets established. When I plug in the USB cable in the phone, the word "USB" appears in the bottom-left corner of the three-colour bootloader screen, but the PC doesn't seem to recognise the fact that the phone has connected. The ActiveSync icon stays grey and the RUU_STAR....exe tool reports an "Error 260", indicating it cannot connect to the phone.
I did try another PC also, but no change, so I fear it seems to be a problem with the phone rather than the USB port, ActiveSync or so.
I was hoping that the SD Card flashing would be the alternative solution, but as mentioned above, I can't get that to work
I am now thinking I may have missed something in the process... I formatted the SD Card using FAT32, I copied the .nbh file and renamed it to STARIMG.nbh. I am getting the "searching for SD card" message briefly, but never get to the point where I am asked to confirm the upgrade; the screen just goes to/stays in 3 colour mode.
Whichever method may be best, but any ideas to get the phone working again would be GREATLY appreciated!
Dtroll1, turn off AciveSync, kill the ActiveSync processes or just disable USB connections in Connection settings and try again.
Did as suggested by ronswens, but am again getting the message from the RUU_STAR...exe tool that it can't connect to the SmartPhone (error 260).
Did you name the nbh file STARIMG.nbh in FAT32 sd card? I have tried sd card flashing,when i do have nbh file but cant flash,it shows "Invalid Certificate", so i doubt the nbh file name was wrong.
When my phone dead, i pull off the battery,wait half minute,and the plug in the battery(if i dont do these,i cant go into 3-color), go into 3-color, plug usb cable,and just run RUU,then it will flash, during flashing, ActiveSync keeps gray untill flash over and system boot into WM5.
I saw lot of people said, if you dont get CID unlock,the phone will easily get dead when flashing, and the only way to solve this is to send to repair.
only official NBH files can be flashed via microsd card!
yes, as dtsme said, try to remove battery for minute, and plug it again. Turn on your phone in bootloader mode (hold Record and Camera buttons and press Red Button (power))
when your device will get in bootloader mode, run RUU for your device (if you have Qtek 8500, then use Qtek rom; if you have Cingular 3100/3125, then use Cingular rom; if you have Dopod S300, then use rom for it; e.t.c)
Thanks again. The NBH file I used is an official one.
In any case- I sent the phone back, so problem "solved" for now.
I have the exact same problem as Dtroll1 - locked in three color screen (ipl 3.06.0000, spl 3.06.0000), consistent error 260 when running an updater, and no effect from putting SK_QtekNOR_3.6.252.1_Ship.nbh on a MicroSD as STARIMG.NBH.
Any further ideas?
Can I do this on my O2 Neo?
trz said:
I have the exact same problem as Dtroll1 - locked in three color screen (ipl 3.06.0000, spl 3.06.0000), consistent error 260 when running an updater, and no effect from putting SK_QtekNOR_3.6.252.1_Ship.nbh on a MicroSD as STARIMG.NBH.
Any further ideas?
Click to expand...
Click to collapse
http://rapidshare.com/files/56652190/RUU_STAR100_3.6.251.0_02.67.30_QtekEUR_Ship.exe
Here is a link to the OEM QTEK 8500 ROM. IF you are stuck in bootloader, you need follow the SD flashing instructions exactly including case sensitive naming of the file STARIMG.nbh. Also check that your card is FAT32 formatted and verify the file name in a DOS window to ensure that windows has not doubled up the .nbh extension
igord said:
Can I do this on my O2 Neo?
Click to expand...
Click to collapse
I think most HTC phones allow you to flash your phone from the card in such a fashion - the thing you have to figure is what to name the file - the name you give it varies from device to device.
Hi
I've to flash my qtek8500 in SD mode because i've played with registry settings and the phons doesn't boot anymore. Could you tell me whioch buttons i have to press to get the bootloader invoked??? Which button is the camaera button and which is the record button???
StefanV3
read the wiki
Hi
Have found which key the camera button is. Its the key on the right side.
Reflashed it with the latest qtek rom and flashed it now back to WM6.0 .
StefanV3
Dtroll1 said:
Thanks for the quick reply Erofish.
I tried the suggested step already, but it fails because the ActiveSync no longer gets established. When I plug in the USB cable in the phone, the word "USB" appears in the bottom-left corner of the three-colour bootloader screen, but the PC doesn't seem to recognise the fact that the phone has connected. The ActiveSync icon stays grey and the RUU_STAR....exe tool reports an "Error 260", indicating it cannot connect to the phone.
I did try another PC also, but no change, so I fear it seems to be a problem with the phone rather than the USB port, ActiveSync or so.
I was hoping that the SD Card flashing would be the alternative solution, but as mentioned above, I can't get that to work
I am now thinking I may have missed something in the process... I formatted the SD Card using FAT32, I copied the .nbh file and renamed it to STARIMG.nbh. I am getting the "searching for SD card" message briefly, but never get to the point where I am asked to confirm the upgrade; the screen just goes to/stays in 3 colour mode.
Whichever method may be best, but any ideas to get the phone working again would be GREATLY appreciated!
Click to expand...
Click to collapse
I know this is a little too late... but it sounds like your SD card is too slow. For anyone else that has the same problem, make a small 100mb partition on the SD card and place your NBH file there. This will make it so that the bootloader sees the file before it moves on to the regular bootloader.
ivanmmj said:
I know this is a little too late... but it sounds like your SD card is too slow. For anyone else that has the same problem, make a small 100mb partition on the SD card and place your NBH file there. This will make it so that the bootloader sees the file before it moves on to the regular bootloader.
Click to expand...
Click to collapse
I just tried this trying to save a phone it did not work
I seem to have an issue with some mp3 files copying to my SD card in my phone.
The file will copy over, but at the last minute I get an error message saying the phone has either disconnected or stopped responding.
It only happens with some files - usually ones that are more than 10mb, but some mp3 files copy over fine and all other files types seem to copy without any problem - e.g. I can copy over a 150mb rom file.
I am running vista home edition.
Anyone else have this issue, or know how to fix it?
I get this error sometimes as well, but only when using active sync ...
Connect your phone and choose the "disk drive" option to copy stuff to your sd card ...
It is not a fix but a workaround ....
watcher64 said:
I get this error sometimes as well, but only when using active sync ...
Connect your phone and choose the "disk drive" option to copy stuff to your sd card ...
It is not a fix but a workaround ....
Click to expand...
Click to collapse
Same as you.... I figure it out that this problem will happen only when I flash cooked rom, after I flash back the official rom... Problem just disappear.
watcher64 said:
I get this error sometimes as well, but only when using active sync ...
Connect your phone and choose the "disk drive" option to copy stuff to your sd card ...
It is not a fix but a workaround ....
Click to expand...
Click to collapse
Thanks for the reply. This is going to sound like a dumb question, but what is "disk drive" option?
I'm using windows mobile device centre on vista, I don't get any options on connection, it just startes the centre & syncs.
On your phone, when you plug it it , it should give you the option of "Active Sync", "Internet Sharing" or Disk Drive"
If it does not, goto the "usb to pc"(active sync) settings on your phone and re-enable the "Ask me first ...." setting
You sir, are a legend! Thanks very much, all working now.
So I rooted and flashed XtrSense, and thought it would be great if I had a large micro SD card. So I picked up a 32gb card off ebay. Now my first problem is I'm not sure if its a real 32gb or just a 8gb that someone hacked to make it show as 32gb, but thats beside the point for right now.
I've always had a problem when I plug my phone into my computer over usb, where if I move the cable just one bit, it disconnects then reconnects quickly then says that the device would preform faster in a USB 2 slot (all of mine are USB 2).
Unfortunately this happened when I was transferring music and when I unplugged from the computer it said my SD card had errors. I used the prompt to format it, and my card worked fine for a while.
Well that same scenario happened again last week and for some reason I decided to format it using Amon recovery. Now I'm afraid my SD card is corrupt because when I start my phone it says the card is blank or has an unrecognized filesystem. Whenever I try the format option the phone gives, it does nothing. Any ideas?
I can't help you with the formatting issue (try formatting FAT32 through windows?), but I have had the USB intermittent connection problem. Easily solved by using a standard usb cable or charger (not the modified one provided by HTC) and using a small stylus to bend the shorter of the two long sides of the plug slightly outward.
Thanks for the tip on the cord! I'll try that as soon as I find my cord.
And I can't format the card in windows because windows doesn't recognize that anything has been plugged in
And just for clarification you mean the bottom on this picture?
__________
\----------/
|_______|
^^^^^^^
Can you format it through a card reader? Also, can't you format it through the settings | storage settings menu?
Yes, the bottom where you have the carats. there's usually a seam right in the middle that is easily bent. don't bend too hard or far. just a fraction of a centimeter will tighten up the connection
__________
\----------/
|_______|
^^^^^^^
Going through settings and selecting format does nothing. I click the button and it still says its a blank or unsupported filesystem
jlab89 said:
Going through settings and selecting format does doing. I click the button and it still says its a blank or unsupported filesystem
Click to expand...
Click to collapse
if the phone reformatted it then it should be blank.
now mount it to the computer and put what you want on it
You did it wrong in amon_ra. Reformat in amon but this time set first two settings to zero and the remainder fat32. Hope this helps.
DINC¦CM7¦SLAYHER27
So I followed your response and wiped EXT on sd then partitioned it with both settings=0 but I still get the same error message: "sd blank or unsupported filesystem"
EDIT: So I tried to do it in command prompt and it said unrecognized disk label. So i tried to change it but whatever I type it says invalid token
Edit 2: And by command prompt I mean IO installed android adb and foolowed a guide online to try and format my SD card that way
You may try this step by step guide that helped me before: recover data from corrupted SD card
hope this helps.
Hey guys!
I'm having a problem with my SD Card here...
The SD was normal, my phone was normal too, but I decided to Unlock my Bootloader...
The bootloader is unlocked now, I installed a custom kernel "NaA" and I reflashed my room, just to make sure.
But, after all this, the SD Card problem begun...
Every time I connect my phone to the PC, the message "touch the button to connect bla bla bla" appears normaly, but when I touch the button to see the content of the SD Card on my PC, automaticaly appears the message on the StatusBar that I can safely remove my SD Card.
I cant formmat via PC, because he dont recognize my SD (Because of the "touch button" problem)...
What can I do?
Thanks!
Well, I've no idea what's causing that but you should be able to see what's on the SD card via your PC by using the memory stick adaptor that came in the box with your phone. Or try buying a memory card reader.
Or..when you connect your phone to the PC, don't select the option to view your files on the window that pops up, just select the bottom option instead ("Charge Phone" or something similar). Then use your pull-down menu and select the USB Storage option.
Normally, this lets you view the contents of your memory card on the PC. Because I don't know why you're having the issue you are, I don't know if this'll work or not but it's worth a try.
Just turned on my phone after the exam today and normally it justs checks the usb storage as usual but now it's stuck on checking the usb storage, been like this for hours and I've tried restating the phone but same thing.
As a result of this I can't access anything. It's just stuck on (preparing usb storage -checking for errors)
What to do? Cheers
try - remove your external SD card and switch on the phone,
Just tried that an hour ago. It's something to do with internal sd card pretty sure.
Any other suggestions?
cwm format emmc or sdcard [depends on version of cwm] remove external sd card to be safe.
Might have to do that unfortunately
if you are not concerned about apps, just try a factory reset...
zaheedahmed said:
if you are not concerned about apps, just try a factory reset...
Click to expand...
Click to collapse
i bet he is not at all concerned about apps, his phone is unusable. lol
Tried formatting and still same problem.
USB storage is not the SD card .
jje
So what should I do?
USB storage is not the SD card .
jje
yes.....
Rooster19,what do you mean by "USB storage" checking, we understand it is media scanning upon booting, isn't it?
Yeah, but now it just says that, whatever I mentioned in the OP.
Keeps doing that and can't access gallery, music, or can't be detected on PC.
Don't know how it happened :/
Whoa I just got a message saying "damaged usb storage" after rebooting again.
What do
currupted / damaged internal storage....
1: format all partitions using cwm
2: try flashing stock rom using odin.
otherwise sorry in my opinion repair job
be warned doing anything above mentioned now could actually kill the device in the state it is now.
Help anyone
My phone can't even get recognised on the PC..
Anything else??
I think I have no hope :/
yow yow yow
try "FAT32", "default seperate size" andddd "fast format", say "thank you man"