Help!!!
I have run the HimaClearJumpCode.exe on my QTEK 2020 by mistake. Now is on a unbootable state and I don't know what to do.
Can anyone help me?
Related
hi everyone,
i have a huge problem. my rom flash for my i-mate (qtek 2020, mdaII, XDAII) hung during flashing (from 1.66 to 1.72 official i-mate rom) during the ce upgrade step 2. now my i-mate just hangs at the blue i-mate screen and i cant connect to it through pc anymore, get error 101. is there any way to get a good rom on it again (can i connect to the ppc by another way, other software or sd-card0 so it will work again, or does it have to be epaired at at a rapaircenter?
thnx, sorry for the bad english
See the pm i send you.
I have the same problem ...
plz tell me how u solve it
Best regards
plz help, i-mate dead after failed flash, error 101
Hi,
If all that happened was it hung during upgrade you can put the device into bootloader, power+d-pad+softreset button, and attempt upgrade again, but if OS you were upgrading to is corrupt causing the hang a new rom might be the way to go, www.buzzdev.net has everything i needed, or clubimate.com
I have same problem. My q-tec100 is reseting so I can' connect it to pc for flashing again. Please tel me what is bootloader and what is d-pad button so thad i can stop it from reset and connecting for flash
hi friends i have the same prob. somebody plz help me too
Hi there,
Although a frequent reader, this i my first post and I NEED YOUR HELP.
Total loser that i am i accidently run the HimaClearJumpCode.exe on my himalaya instead of the HimaGetDeviceData.exe. And as you stated in another topic: (Warning: DO NOT under any circumstances copy and run HimaClearJumpCode.exe on your device as it will render it unbootable. It is used by the upgrade utility to put you device into bootloader mode prior to upgrading.)
I am now properly F*CKED, please help!!!!!!!!! (if there is a way out of this...) Please also note i do not have the proper country id code to install a new ROM ( Orange Netherlands), which is what started this mess.
Humbly hoping for your help...
Arnout
[email protected]
msn: [email protected]
fixed!
thanxs to evert-999 (thanxs, mate!!!!!) i was able to overcome the country id error and install wm2k5. After this everything works again!!!
Only thing weird is i still get a windows mobile 2003 screen when i reboot...does everybody have this?
ba bootloader serial v2.06
I suffered the same. so u have company.
Ifailed in my upgrade on my ba from radio rom v1.12 to v1.13. my ba got stucked in the bootloader mode in the course of upgrading.I cannot secure the ppc data. I have to downgrade it from rom v1.40 to v1.31 to FREE it b4 I upgrade back to rom v1.40 again with radio rom v1.12 I tried twice and the same thing occured. for the time being I have to be contented with my v1.40 and radio rom v1.12.
any insight on where I went wrong?
Stuck in bootloader
I GOT THE SAME PROBLEM-STUNK IN BOOTLOADER...WT CAN I DO??
IS IT GOING TO UPDATE THE ROM?? BUT GOT ANOTHER PROBLEM WHEN I UPDATE IT IN STEP 1 - ERASING THE ROM...STUCK AGAIN...THEN IT SAY ERROR 112.......
I REALLY NEED HELP...
ANYONE CAN HELP ME, PLz email me.....?
thx..
AKELA
[email protected]
Hello everybody from Russia (Moscow).
My phone model is O2 Xda Neo (Germany)
I have used this
278638-ruu_prophet_215746_2157138_023021_qtek_rus_ship
RUU_215737_2157135_023021_QTEK_s200_RUS
and return back to original O2 Germany without problem.
But I have installed next:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship
Now I cannot install any other software. only this english version.
In install time (on 95%) I got next message
error 326: invalid command - the NBF file could not be used for your PDA phone - please check your NBF file
Boot screen has
IPL 2.15.0001
SPL 2.20.0001
The phone is ok. I can install this english version again, but I would like return to original German version or Russian.
I tried to use
pdamobiz.com_downgrade_and_unlockcid
and RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
but it does not help.
Can you help, please?
piece of cake:
what do you need is
reCOOK the ROM using molski.biz devpack...
just be sure to remove the ipl/spl nb file after you've extract the nb.nbf file
downgrade
Hi,
I have searching for a long time and used so much tools to downgrade my Qtek S200 Pocket PC to JAMin_WWE_1000925_10009114_11420_ship.exe (SPL 1.xxx, IPL 1.xxx)
When directly run "JAMin_WWE_1000925_10009114_11420_ship.exe" I get this error: the NBF file could not be used for your PDA phone - please check your NBF file
JAMin_WWE_213923_2139123_022021_shi.exe ROM is not my solution. I need to change my IMEI. iWizard and Lokiwiz03a don't help me to change IMEI.
Can anyone help me how to do Rom Cooking for SPL 1.xxx?
http://www.molski.biz/ here the rom cooking program and it is complicated a little bit.
hi i had a trouble with HardSpl , my niki stuck at 0% and dont complete the hardspl , someone can help me????
did you do the sspl first?
my dopod 818 pro(htc prophet g4) can't power on.
i need help to find the way to repair it.
i've looking in many pda forum, they talk about rewrite/reprogram the bootloader(i can't enter into bootloader mode).
they use something about jtag programmer, could anybody tell me how to use that thing(i'm newbi).
or is there anyway else to fix my problem???
I have the same problem with my Qtek S200 G4
this Jtag Pinout for HTC prohpet G4 ~ http://img.majidonline.com/show/183593/wizardjtagpinsis8.jpg
ROM Upgradation Failed
Dear All,
I was trying to upgrade my dopod 818 pro ROM version, but unfortunatly my connect breaked in the mid of process, due to that lost everything, even my previos OS too. and now i am unable to restart my mobile.whenever i am trying to on it, its showing only DOPOD on the disply may u plzz help me to recover my old settings?? i had already done the hard resett, but Result is NILL...
aadi1 said:
Dear All,
I was trying to upgrade my dopod 818 pro ROM version, but unfortunatly my connect breaked in the mid of process, due to that lost everything, even my previos OS too. and now i am unable to restart my mobile.whenever i am trying to on it, its showing only DOPOD on the disply may u plzz help me to recover my old settings?? i had already done the hard resett, but Result is NILL...
Click to expand...
Click to collapse
try reflash with the official rom