I upgraded my himalaya many times, only stop at Radio upgrade stage. I found out There no IMEI in the Device Infomations.
Related
Hi,
I am trying to upgrade my orange m3100 to wm6 (Blackmajic), i have successfully upgraded the bootloader and radio version but when i come to upgrade the WM6 Rom i get error 260 which says check the cable. I have tried on 2 different pc's and different cables.
Basically the phone is connected but when you get past all the tick boxes and press update active sync drops out just before it updates.
Has anyone had this problem or do they know how to solve it?
I have also tried different Roms
Thanks for your help Jason
I have just tried to re flash the spl and the same thing is happening here now :-(
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#error
Tried these still no luck. Any help would be Much appriciated!
Try to read this... http://forum.xda-developers.com/showthread.php?t=299657
I had this same, and Olipro helps me
Got it sorted now!
Thanks a lot
i m using Dopod 838 pro, trying to upgrade to wm6 but i upgraded first (spl-2.30.olipro) after upgrading stucked in bootloader mode. i tried upgrading several roms & radio but no response. Please help me out of this. i want my cell alive back. Help from the expert members....
Is it bricked or just stuck at the bootloader screen?
Try the wiki.
Mr. Vanx's guides might help with future upgrading too.
Have you tried a Hard Reset. If you have Hard SPL on it (Olipro) then you should still be fine.
Try going into bootloader Mode and the flash again.
Good luck
Hi eveyone
i m using Imate Jasjam (hermes100). i am having a problem with network signals. its just network shows dummy signals. cant make or receive calls.
it all happened when i upgraded it to WM6. i used Hard SPL v9. the rom upgrade was ok. except that it stuck at 100% and gave a message to recover. but the rom upgrade become successful. after that i was having issue of this annoying radio prob. i used radio 1.54.30.10 after that i m using 1.54.07.00. but no change is noticed.
when the radio stops working, i change the 3G setting at Comm manager to auto mode than to GSM mode an it failed to register to network and showed "No service"
Imate Jasjam (Hermes 100)
IPL 1.04
SPL 2.60 Olipro
HardSPL v9
OS Schap's WM6 pro 4.31 full
This is a very well documented problem with hermes. More and more people are starting to have this problem now.
I had the same problem and I got a new phone under warranty.
Most likely it is a radio hardware problem and probably you will need to have the motherboard changed.
If phone is still under warranty, just get it repaired by HTC. If not then you are probably out of luck.
My 2 cents
Help needed!!!
that is very odd.
my hermes is working perfectly ok except the radio. it has never been bricked. i have flashed it many times. tried all versions of Hard SPL. tried many roms. tried many radio roms. everything installs to the last dip.
but still no success regarding radio signal problem.
i have noticed that when one sim stops showing network, i put other sim having other network coberage and it works. but jus for 10 to 12 hours. after that i have to change it back. and it works for 10 hours. but it really getting me on my nerve
please share if helpful to me.
PLEASE ADVISE ME if i get my Hermes fixed by changing its mother board, should i go for WM6 and newer radio or not.
thanks
hi
I have a phone brought from ebay and flashed it with schaps newest rom, upgraded the radio and installed hard spl and used it for 4 weeks before it was barred. T mobile said it was a bad flash and to reflash it with the official firmware. I have done this numerous times. My imei has changed. It now says it is a number with a lot of 0's that doesnt match the back of the phone or it says 'failed', when i type *#06#. What has changed the imei and how can i get it back?
please help
thanks in advance
flashing will not change the imei at all, whether its hardspl or a rom
Check with *#06# if your imei has changed to 35519500000001701. This is a default imei, and usually happens when the security area of the device is damaged.
great
the mighty pof!!!!
Mr POF
can u help us unbrick the hermes with spl 2.03 ipl 1.04 NO GSM NO KITL NO CID????
yeh thats what its changed too. Is there anyway i can fix the security area? Please help and thanks
which radio version are you running?
1.41.00.10 i used the upgrade tutorial on mrvanx's htc site for the schaps rom
should i try a radio upgrade then do you think? if so what to? thanks
Guys, I need help, want to update my P3400 Gene100, I've been reading the procedure for updating, however, shows that the SPL on the device is 1.14, how do I unlock it and you can upgrade without problems?