Hi There,
Need some advice as I am a novice, I have upgrade from
Existing Rom: RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10_108_Test
New Rom: HER_DopodAsia_1237074_1060010_WWE_SHIP
After reset, the screen just hang at the Windows Mobile Screen.
Not sure, what is the next step as the current Bootloader is at 1.09
Please help....
Oh!! So do i,man. I also got this problem. Hang at the Windows Mobile Screen. Waiting for the solution..Pls help...
I ogt a frined with a G4 that I am trying to fix if possible.
THe device was CID unlocked long time ago and I installed on it TNT Series WM 6.0. He says he was taking pictures and video and the phone got locked, so he soft reset and now it will not reboot completelly it stays in the TNT Series screen.
Is the device bricked?
I have put it into bootloader mode and try to flash the latest TNT WM 6.1 but It will not connect to active sync... what should I do?..
If there is a quick advice in somebody's mind I will appreciate as I am just helping this guy...
Thanks
Have you tried a hard reset?
fixed G4....
being on bootloader I flashed with "Wizard_Love_2[1].26.10.2_WWE_Novii_CF2" ....
What would be the best or latest WM 6.1 cooked ROM available that anybody would recommend.... I know I can read but I am just doing a favor for one friend....
Can anyone please post a guide on how to flash Hard-SPL onto my HTC TYTN.
The guide for installing Hard-SPL onto the HERMES is not available anymore, and i am EXTREMELY confused about what im doing, and i am afraid i will brick my phone if i do something wrong.
Please please please help!
Read the sticky, first post on this page.
It really isn't hard to do. But be sure you know what you are doing btw. SO read the sticky!
Basically you just download the flavor of Hard SPL you want (I used 2.10 which I can recommend, very easy to downgrade to factory SPL again as I just learned!).
After download unzip the folder and run the RUUWrapper. Follow instructions exactly, do nout unplug your device etc. and it should work like a charm. It takes about 1 minute!
If you don't know what you are doing or you are still doubting, wait for Mr Vanx site to come online again or don't flash. There is always a risk you screw up and end with a $500 brick.
So use at your own risk!
Download hard spl v7 from
http://forum.xda-developers.com/showthread.php?t=296722
thanks guys i did it
hi guys have tried to update mine today on a jasjam it connects sys it updating but starts at 0% then just jumps to 100% and says flash finished but when i restart the phone it still has the same loader what am i doing wrong i want to update it from windows 5 to windows 6 using crc-9 but don't want to update till i do the loader any help from you guys would be great
cheers puca
puca said:
hi guys have tried to update mine today on a jasjam it connects sys it updating but starts at 0% then just jumps to 100% and says flash finished but when i restart the phone it still has the same loader what am i doing wrong i want to update it from windows 5 to windows 6 using crc-9 but don't want to update till i do the loader any help from you guys would be great
cheers puca
Click to expand...
Click to collapse
start the device in bootloader, what is displayed?
Mine is doing the exact same thing. Starts at 0% and jumps to 100% and says it is done, but it has done nothing.
Rockford_622 said:
Mine is doing the exact same thing. Starts at 0% and jumps to 100% and says it is done, but it has done nothing.
Click to expand...
Click to collapse
the SPL flash is VERY quick.
I'll ask YOU this aswell, put your device into bootloader mode and tell us what it says.
hi mrvanx
thanks for your reply after checking the bootloader it has changed to 2.10 olie it did it so fast i thought it had failed will check properly next time and have successfully flashed it to crc 9 and it runs great thanks for all the help
mrvanx said:
the SPL flash is VERY quick.
I'll ask YOU this aswell, put your device into bootloader mode and tell us what it says.
Click to expand...
Click to collapse
I appreciate your reply Mr. Vanx. Same as with puca, I put my phone into the bootloader mode and it does indeed show the correct 2.10 Olipro version. This is the 3rd 8525 I have had and I could have SWORN it took much longer on the first 2. Even the update from WM5 to WM6 seemed to take much less time with this particular phone. Guess I shouldn't really complain
Downgrade Error 260
Hi Mr Vanx I have followed your guide to downgrade my current SSPL (2.10 Olipro) to SSPL (1.11). But I keep getting error 260. I have followed guide step by step.
I have even tried flashing from SD-Card (by renaming to HERMING.nbh). Process runs successfully, but nothing happens.
Its still showing SSPL-2.10 Olipro in bootloader. Am I missing anything?
Thanks
can some one point me to the guide. I am facing a NO GSM problem on vodafone VPA 1605 with following config:
ROM Version: 1.20.161.6
Radio: 1.03.06.00
CID: VODAP001
Bootloader: 1.04
I do not see the radio version or the IMEI. So I would like to do a HARDSPLv7 followed by Radio ROM update to 1.06.00.10. I hope this will work. Seniors may help with their sggestion.
Can someone help me with the guide to HARDSPL as I am doing it for the first time and the guides are not available at MR Vanx site nor can I locate the sticky?
regards,
H
have you read the first page?
cant uprade from spl 1.40 to 2.04
am using hermes 300 and i want to uprade from 1.40 t o 2.40 but i cant do it.i ve tried can anyone help
dania
How to hard reset without win
hi
I have an I-mate 9502 but my problem is for pocket pc generaly.
I installed a program for sound, When I do a soft reset it hangs on Blue Imate page and didn't boot.
I tried to hard reset but it dosen't worked too(I know hard reset of it, is Green+FN+Power button) but it don't work, Also I tried to install a fresh Rom but it need to loud windows.
Please help how to hard reset it.
thanks
majida said:
hi
I have an I-mate 9502 but my problem is for pocket pc generaly.
I installed a program for sound, When I do a soft reset it hangs on Blue Imate page and didn't boot.
I tried to hard reset but it dosen't worked too(I know hard reset of it, is Green+FN+Power button) but it don't work, Also I tried to install a fresh Rom but it need to loud windows.
Please help how to hard reset it.
thanks
Click to expand...
Click to collapse
you should try the hard reset iMate 9502 posts by martin_yo in http://forum.xda-developers.com/showthread.php?t=407336&page=2
Code:
After Flashed with the new ROM, My Device is now stuck in iMate Blue Screen Logo....!!!
But Don't worry Guys...it can be solved with manually hard Reset...
1. Remove battery and reinsert (to make sure the phone is off).
2. Hold down Fn and the Green button (with the phone icon on it) and press the power button.
3. You will see the white hard reset option screen almost immediately. Press the Left Soft Key to hard reset.
Work for me...
but !!
With many thanks Hakim
But I know hard reset of my phone, I did it many time before, unfortunately it dosen't work this time. I tried all I knew about hard reset. but I couldn't do anything for my phone.
I tried (FN+Green+power like last time I did hard reset easy)(FN+Green+reset button)It don't sho any reaction.
Please help me.
I got a dopod 838 pro of a friend with wm5 and upgraded it to wm6. This worked fine but i wasn't happy with the way it was behaving so I downloaded a original rom from dopod asia. When I flashed it it completley it **** itself at radio flashing. It now boots and gets stuck on the windows mobile screen and won't do anything, i've tried tapping the screen, pushing every button and hard reset a few times. Could someone please help me, I used this thing every day before it bricked.
If you have Hard sPLed your phone to SPl 2.10 olipro, I'd suggest trying to flash a stock rom with the sd card to see if you can restore your radio rom. You may have corrupted it and it may never work as a phone again. I'd still try the stock rom then reflash what you want if it works... You can find the instructions for sd card flashing on the wiki with a quick search...
Hope this helps... Cheers
hello there
i am stuck in tricolor bootloader mode ipl 1.04 spl 2.03. the thing is i didn't flash my device when this is happening. it happened when i changed the sim card.when i turned it on the tricolor bootloader appear..i never have problems with my device b4..i hv tried the fix mentioned here by using mtty still to no avail..also i tried to flash my device (1st time ever) to the official rom..it did get to 100% and succeful but when it reset the bootloader reappear..any idea??
i never flash my device b4..the one that i mentioned is done after this problem appear so the question of hardspl do not arise..
please help..hoho
Someone please delete this thread
Someone please delete this thread
Use the SEARCH! There are 100+ people with this problem
Aww, come on guys. I think its funny.
guys be kind and take life easy, help the need, and dont dissapoint him, ONE DAY YOU WILL HAVE THE SAME PROBLEM!!!
hi,
i am facing the same problem that u have faced before "my herm is in tricolor bootloader mode with spl 2.03 and ipl1.04" have u got any any solution for that...?
please do share and help mee.. i am waiting for your reply.
thanks