Related
Japanese ROM from DoCoMo hTc Z has been uploaded to XDA-Developers FTP and added to the Hermes wiki, you can find it under the Available Original Shipped ROM Versions.
Notes on this ROM:
ROM Version: 1.23.731.2 06/24/06
Radio Version: 1.06.00.10
Bootloader: 1.04
Language: JPN (Japanese)
CID: DOCOM801
As you can see this is nothing new, but I guess it will be useful for people with this CID to be able to downgrade to bootloader 1.04.
Enjoy
Hi pof,
Thanks for that. I tried this to flash my X01HT after unlocking it with imei-check but with no luck. RUU went successufully till the last screen and I hit the upgrade but it returned an error saying something like this RUU cannot be used for the device. Bootloader is now 1.04 and the device should be SuperCID with imei-check. The only thing I can think of is that I upgraded the radio to your 1.2. Would that screw SuperCID? I appreciate your advice in advance.
Thanks,
harryk
harryk1372: If you are in 1.04 bootloader just run the upgrade utility again without disconnecting the device or start the upgrade in bootloader mode to bypass CID checking.
If it is really SuperCID then you shouldn't have seen this error.
Hi pof,
Thanks very much for getting back to me so quickly.
I ran the upgrade in the bootloader mode. I thought that I don't have to run it twice if the device is already at the SuperCID state and didn't run the update twice. I'll try it again when the device is fully charged as the battery is now down to like 30%.
I'll post the result again when I am done. Thanks again for your prompt advice. You're the man and I really appreciate your efforts taking us thus far in cracking Hermes.
Regards,
harryk
Hi pof,
The device looks like it was not in the SuperCID state and RUU went fine with the second run with no error. However, the upgrade failed when it hit exactly 47% no matter how many times I tried it. Lucky that I did not brick my device but of course it seemed to lack some of the components and it did not even have the Connections setting to set up the Internet access. Also, AutoRun and cabs in the ExtRom didn't take any effect either although the cab files were there.
I decided to flash the TyTN ROM instead and that was successful. That is fine as I only use Japanese occasionally and I didn't really want the Japanese MUI so I will keep it as is. Perhaps I will tweak it a little to be able to use Japanese with loading the Chinese nls, Japanese font, Japanese IME and so forth just like I did with my Universal.
Thanks again.
harryk
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
s2k7 said:
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
Click to expand...
Click to collapse
fyi...
http://forum.xda-developers.com/showthread.php?t=283177&page=2&highlight=qtotter
I always downgrade my JASJAM using I-Mate shipped ROM
s2k7 said:
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
Click to expand...
Click to collapse
i use the docomo rom on my x01ht. it's ok. i have no problem with it at all.
a friend of mine uses a sim-unlocked x01ht (/w the original s/b rom) with sb_usim, but she does not get such a msg at all. do you use a s/b sim?? if yes, i suppsoe you did something wrong...
X01HT Unlocking Problem
I've got this X01HT a few days ago from S/B shop but when I tried unlocking it the result was no good using my cable. I read from other site that X01HT released from December 2006 cannot be unlocked. Please give me some clarifications on this and also, is FLASHING on lower rom version even in english version can resolve the problem...? Your response will so much appreciated.
Thanks in advance.
At the moment it's not possible to unlock X01HT devices wich where bought after 12/1/2006 and have bootloader version 1.09 and RadioROM version 1.14.0.10! Please be patient.
To the experts, I need some advice. I intend to get a X01HT, already unlocked and flashed with the dopod 838 pro firmware. However, I intend to flash back the Japanese shipped rom :
RUU_HER_DoCoMo_1.23.731.2_1.06.00.10_JPN_SHIP.zip
What are the requirements esp where :
Bootloader (SPL)
Latest Radio Bootloader (HTC_BOOT)
Or since its unlocked, do I just go to the bootloader mode and flash direct? Any side effects if I do so, since its changing from an english rom of another clone (Dopod 838 pro, WM6)?
I am not even sure if the RUU_HER_DoCoMo_1.23.731.2_1.06.00.10_JPN_SHIP.zip rom is WM5/6. Please advice, thanks..
Hi, I'm a newbie here.
I have great interest for purhcasing Softbank X01HT.
At the beginning, I proposed to flash the rom to English verison.
But recently, I see some messages that we cannot downgrade the bootloader 1.09 to 1.04 anymore.
Therefore, I would like to know ........
Is anyone working on the downgrade method for bootloader 1.09 ?
If so, what's the status now ?
Can I expect there will be a new solution coming soon ?
So many questions ..... hope someone can answer me. Thx !
1.09 to 1.04
ok, what I understood is :
1- you can download from 1.09 to 1.04.
see :
Bootloader
The bootloader is the place where you can change the low-level software parameters and some hardware parameters of the Hermes, change and read the ROM and provides information about it.
The bootloader is invoked by pressing down both the POWER button and SIDE OK together and using the stylus at the same time to press the RESET button at the bottom.
The bootloader version is shown for a short amount of time when booting the device. You'll see "SPL-1.0X"
Versions
* 1.04
There is a bug in bootloader 1.04 wich allows you to flash any ROM without a CID check. You have to be in bootloader mode to use this bug.
It's possible to upgrade the RadioROM. You can even flash a patched RadioROM wich is needed to unlock your device.
* 1.06
The bug from version 1.04 is fixed. Without downgrading to a Shipped ROM with bootloader 1.04 that matches your CID it's not possible to flash a ROM with a different CID.
The RadioROM can't be upgraded. You have to downgrade to bootloader 1.04 to unlock your device.
* 1.09
You can't downgrade to bootloader 1.04 by flashing a Shipped ROM. However imei-check.co.uk is able to downgrade the bootloader.
There was a solution posted on this forum, but it was stolen from imei-check and was removed. If you are not willing to pay you have to wait until another solution is developed.
The RadioROM can't be upgraded. You have to downgrade to bootloader 1.04 to unlock your device.
"There was a solution posted on this forum", the remaining of it is here, what can be shown :
1. Go to Google, search for DownGrade_SPL.rar (rq : does not work anymore)
2. Connect your tytn to PC and wait until activesync completed.
3. Run M3100v3cUnlock.exe. Once you see checking device.... in DOS box and whilte screen on your tytn, close the program (Dos box) immedaitely.
4. Run ROMUpgradeUt.exe and follow the japanese wizard to complete the boot loader downgrade.
5. Reboot your tytn and then put it into bootloader mode agian, you should see SPL-1.04. Great!
6. Download pof's HTC_Hermes_SIM_Unlock_v2a from
ftp://xda:[email protected]_v2a.zip
7. Flash the patched radio rom 1.16, then Reboot.
8. Copy HERM_Unlock_v2a.exe a small PPC app pof wrote into your TYTN memory.
9. Open File Explorer, run HERM_Unlock_v2a.exe on your TYTN and wait about 1 minute until it shows up a completed message. Reboot again!
10. Download mtty.exe from
http://wiki.xda-developers.com/uploads/mtty.exe
11. Disable ActiveSync, and then run mtty.exe, choose usb connection; Enter. You should see USB> prompt. Type in: info 2 . When you see 00000000 or SuperCID string. You are safe and ready to upgrade to the latest TYTN 1.35 Rom with bootloader 1.09.
2- BUT the trick is that it is impossible to SIM unlock even if you downgrade Right now there is no solution, and I don't know when or if there will be. I hope there will be one indeed...
3- you can still change the language, but it is limited in two ways :
for the good news :
http://forum.xda-developers.com/showthread.php?t=281617
for the bad news :
http://forum.xda-developers.com/showthread.php?t=284765
and a good news in process:
http://forum.xda-developers.com/showthread.php?t=284765&page=5
but I don't get exactly how it works...
For more information look around the board, or I will try to retrieve the info.
take care,
I'm looking forward buying the same device
dam
alexnalexn said:
Is anyone working on the downgrade method for bootloader 1.09 ?
If so, what's the status now ?
Click to expand...
Click to collapse
As dam has explained, some time ago we published a method to downgrade the bootloader to 1.04 but this method used imei-check copyrighted files and had to be removed from the forum, some people downloaded the files and it has appeared on chinese and russian sites after we removed it from XDA-Developers, but this method violates imei-check copyright and should not be used, if you are a legal person and want to downgrade the bootloader now you should BUY imei-check unlocker.
I started working on a project to Downgrade SPL by modifying HaRET tool with the help of some other people, we managed to put IPL on ram and jump to it, but we still haven't managed to do it with SPL (the device hangs when copying to memory). Now I'm quite busy and can't dedicate all the time I need for this, but will try to finish it once I know how to copy the SPL correctly... if someone has experience in this and want to help, let me know and I can send you the source of modified haret, but it's still a lot to do... once this is finished there will be a free method to downgrade bootloader, now there isn't.
When bootloader is downgraded to 1.04 you can change the ROM because it has a bug where the CID is not checked if you run the RUU twice. You can also use HERMES SIM & CID unlocker when you have bootloader 1.04. But on softbank x01ht version sold after 1 December 2006 it is not possible to SIM & CID unlock even if you have bootloader 1.04 because the radio is read only and can't be patched. AFAIK no one has knowledge on how softbank did this, and there is no known method to circumvent this yet.
Apparently, I'm pretty stupid.
I just got the Cingular 8525; I have spent two hours on this site.
Things I've noticed:
One page says go into bootloader; one page says not to allow usb connections.
I do not know if I am supposed to have my non-Cingular SIM card already in the phone when attempting to do anything.
I have seen connect via USB and use mtty (with what settings do I use when I click on USB from the dropdown menu (if any) and do I connect with mtty via USB in bootloader or when the phone has booted into Windows 5.0 and again what about the non-Cingular SIM card?).
I have flashed my computers BIOS several times but I do not understand how to flash this phone based on the myriad of instructions all over this site (and RFTW did not help which is why I am here with 40000000 questions).
The steps to go from SPL 1.06 to an unlocked SIM/CID phone are?
Things I do understand:
I have SPL 1.06 (I know this from bootloader).
I must downgrade to 1.04 from 1.06 then run the upgrade to 1.06 from the Hermes Upgrade wiki page (I already downloaded all of the Cingular files).
Thanks in advance for any clarification.
I unlocked my 8525 last week, I had bootloader 1.06 so I downgraded to a ROM with boetloader 1.04(you can find it here http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades ).. then just follow the instructions in the zip file you downloaded(i used HERM_Unlock_v2a), which are:
1. Enter bootloader mode on your Phone. To do this, simultaneously hold side OK and POWER buttons together and reset with stylus.
[You should see SPL-1.04 on the top of the tri-color screen, if you see SPL-1.06 this unlocker will not work, please wait for the next version]
2. Connect your phone to your computer using the USB lead.
3. Run the MaUpgradeUt_noID.exe program – this will reflash your phone with a patched radio ROM required to unlock.
4. Wait patiently.
5. Once the MaUpgradeUt_noID.exe upgrade completes, it will end up saying "Upgrade Error 114", but the patched radio ROM will be flashed anyway, dont worry about that error!
6. Soft reset with stylus (Device will not be hard reset and no data will be lost)
7. Allow your phone to reboot. Once it has, connect to your PC using Activesync, and copy the HERM_Unlock_v2a.exe program onto your phone. Alternatively, copy it to an SD card and insert into your phone.
8. Run HERM_Unlock_v2a.exe on your phone. Wait about 1 minute.
9. You should see a "SUCCESS!" message from HERM_Unlock_v2a.exe, after that soft reset your phone.
10. Process is (hopefully) complete!
11. If the phone requests unlock code when you put a locked SIM, the code is: 22051978
I assume I want go to 1.04 for Cingular which is 1.30.502.1.
What about my SIM card? Is it supposed to be in phone when I run this file? (it's a t-mobile sim).
I assume the activesync connection via usb is okay? I cannot get it to connect (even though the phone is on and booted into Windows 5.0); is this because I have not inserted the SIM card into the phone? Note: after I unplugged the device, setting allow USB connections on the device in the ActiveSync settings, then plugging it back in, it connected via USB in ActiveSync (4.2). However, I just got a box saying the version of ActiveSync is not compatible with this mobile device. This occured after I started the installer and it showing Verifying the information on your PDA phone.
I received an update error 260 since it thinks the phone is not connected via USB (and I noticed the ActiveSync icon in the system tray is gone).
I went to check the M$ page to see if there is a later download; there is not. Then, the AS icon return (trying to update outlook, install nero mobile) so I decided to run the installer again and now sees my current version 1.34.502.1 and I have the option to upgrade ROM
MilanoRex said:
I unlocked my 8525 last week, I had bootloader 1.06 so I downgraded to a ROM with boetloader 1.04(you can find it here http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades ).. then just follow the instructions in the zip file you downloaded(i used HERM_Unlock_v2a), which are:
1. Enter bootloader mode on your Phone. To do this, simultaneously hold side OK and POWER buttons together and reset with stylus.
[You should see SPL-1.04 on the top of the tri-color screen, if you see SPL-1.06 this unlocker will not work, please wait for the next version]
2. Connect your phone to your computer using the USB lead.
3. Run the MaUpgradeUt_noID.exe program – this will reflash your phone with a patched radio ROM required to unlock.
4. Wait patiently.
5. Once the MaUpgradeUt_noID.exe upgrade completes, it will end up saying "Upgrade Error 114", but the patched radio ROM will be flashed anyway, dont worry about that error!
6. Soft reset with stylus (Device will not be hard reset and no data will be lost)
7. Allow your phone to reboot. Once it has, connect to your PC using Activesync, and copy the HERM_Unlock_v2a.exe program onto your phone. Alternatively, copy it to an SD card and insert into your phone.
8. Run HERM_Unlock_v2a.exe on your phone. Wait about 1 minute.
9. You should see a "SUCCESS!" message from HERM_Unlock_v2a.exe, after that soft reset your phone.
10. Process is (hopefully) complete!
11. If the phone requests unlock code when you put a locked SIM, the code is: 22051978
Click to expand...
Click to collapse
crazyut said:
I assume I want go to 1.04 for Cingular which is 1.30.502.1.
Click to expand...
Click to collapse
right
crazyut said:
What about my SIM card? Is it supposed to be in phone when I run this file? (it's a t-mobile sim).
Click to expand...
Click to collapse
doesn't matter
crazyut said:
I assume the activesync connection via usb is okay?
Click to expand...
Click to collapse
It is ok, but generally it causes more problems than it helps. Best is to disable the checkbox that says "enable usb connections" on activesync settings and you'll see the icon on the system tray turn gray with a red "X". Then you need to start the RUU when the device is in bootloader mode (tri-color screen). After you have upgrded the rom (or radio rom) you can reenable activesync again if you want.
crazyut said:
I cannot get it to connect (even though the phone is on and booted into Windows 5.0); is this because I have not inserted the SIM card into the phone?
Click to expand...
Click to collapse
SIM card and activesync have nothing to do.
crazyut said:
I received an update error 260 since it thinks the phone is not connected via USB (and I noticed the ActiveSync icon in the system tray is gone).
Click to expand...
Click to collapse
Icon was gone because RUU checks your current rom version using activesync and then kills it an put device in bootloaer mode. If RUU cannot kill activesync correctly errors happen:
You will avoid the 260 error if you disable usb connections on desktop activesync as I told you, and start the upgrade in bootloader mode... only difference you'll notice is that RUU will not report your current rom version.
Hey. I left the RUU software running (the 25+ minute variety) while I went to buy a case and care charger. I came back and evidently, the phone had rebooted because, it is at the Windows Mobile screen to setup the Windows Mobile device. I assume it is safe to do the 2a software. After that, am I able to update the RUU back to 1.06?
Thanks for your help, Milan and pof!
I rebooted into bootloader to confirm successful downgrade to 1.04 from 1.06 and it was. The RUU software from the upgrade page for Cingular appears to have been successful.
I am now going to attempt the 2a software.
Yes, now follow all the instructions on sim&cid unlocker v2a, and when finished, flash the cingular 1.34 rom again.
pof said:
Yes, now follow all the instructions on sim&cid unlocker v2a, and when finished, flash the cingular 1.34 rom again.
Click to expand...
Click to collapse
It's now on the upgrade screen to Radio 1.16.00.69 but it does not show the previous version. Is this normal? I have not pressed upgrade yet. I have the splitter with the AC and USB cables into the phone (currently in bootloader mode at SPL-1.04).
yes, it is normal... i told you before:
pof said:
RUU checks your current rom version using activesync
[...]
start the upgrade in bootloader mode... only difference you'll notice is that RUU will not report your current rom version.
Click to expand...
Click to collapse
pof said:
yes, it is normal... i told you before:
Click to expand...
Click to collapse
I got the 114 error as promised in the readme. I exited the program using the EXIT button.
The next step:
6. Soft reset with stylus (Device will not be hard reset and no data will be lost)
On the phone display, it still shows Upgrade Radio Stack Please Wait..
The soft reset is the simultaneous OK and Power?
I just took the battery out and reset; it appeared to go okay. I copied the exe file to the phone and was able to run the file as in the readme. I then reset the phone, put in the t-mobile sim and it works.
Thanks much to POF and Milan for their straightforward approach. You can use this thread as a tutorial!
Is there any reason I should add the 1.06 file back to the unlocked 8525?
SPL 1.06 to SPL 1.04 back to SPL 1.06?
Hi:
I followed pof's (with pof's help) tutorial on how to unlock the Cingular 8525. I am currently at SPL 1.04 (downgraded form SPL 1.06) and had run the v2a software to unlock. It works great with T-mobile (I was a Cingular customer but made the switch).
My questions are:
Is there any reason to go back SPL 1.06?
If I do go back to SPL 1.06, it does not affect the unlock status of the SIM or CID?
I still am confused about the Radio and what that does in relation to the CID, SIM, or phone. I assume the Radio is affected the SPL version that you have?
I have tried to peruse through various pages regarding downgrading (the 13 page thread for example) to see if that question is answered.
The radio ROM controls the GSM/GPRS/UMTS hardware in your hermes. You cannot independently upgrade it unless you are running SPL 1.04. There is no reason IMO to go to any other bootloader version.
Sleuth255 said:
The radio ROM controls the GSM/GPRS/UMTS hardware in your hermes. You cannot independently upgrade it unless you are running SPL 1.04. There is no reason IMO to go to any other bootloader version.
Click to expand...
Click to collapse
Oh okay, that clears up yet something else I did not understand
Thanks for the tip on the bootloader version; I will leave it at SPL 1.04.
That being said, I am currently in the middle of the Radio 1.20 thread; I have not finished reading it yet (I can only do so much at work before people wonder what I am doing). Have you upgraded to Radio 1.20? If not, what radio are you running and what do you think of its stability and/or functionality?
Thanks!
I'm running the 1.20 radio. It and the 1.35 TyTN ROM are the best combination I've used so far.
Hello everybody.
I had installed "TouchFLO Charmer WM6_GER ver. 2.8 BETA by mschmitz" over an WM5 T-Mobile MDA compact II (Charmer) and everything worked great.
see link: http://forum.xda-developers.com/showthread.php?t=331142
Now i cooked my own ROM (Charmer WM6) with some improvements and correct working German Input methods.
see Link: http://forum.xda-developers.com/showthread.php?p=2075053#post2075053
As there are several "how-to" here but all are spread around this forum, i will try to give a checklist how you probably not kill your device.
Print this checklist and search the forum for the how-to's.
Prerequisitions:
If something goes wrong, be sure to have a ROM of your Phoneprovider (e.g. T-Mobile WM 5 AKU 2.2 for a T-Mobile device).
If you sdo not have an original ROM, you can use this one to flash back to WM5 (i used this, do not worry that it is english): http://www.tm-phonedownloads.com/files/RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship.exe
Backup your data! All will be lost after upgrading, or if anything goes wrong. You can use Sprite Backup (the only tool that allows upgrading from different WM versions - eg. from WM5 to WM6 - but you wil loose SMS. Use PPCPIMBackup Freeware to backup SMS).
Always use the corrrect ROM (do not use e.g. a MDA III ROM on an MDA II)
I also recommend to delete your Active Sync Partnership after upgrade (Active Sync/File/Delete Mobile Device) and let Active Sync setup a new one (otherwise you may have problems with File sync, sometimes an error pops up).
If you have problems to sync with outlook, it might be a problem with the restored data of SPRITE BACKUP as WM5 has a different database than WM6.
In case you geet an error "Error 8007000e" or similar do the following:
1) Hard Reset
2) Do NOT connect to Active Sync !!!
3) Restore your personal data (If you use Sprite backup select Merge, Level 1 but do NOT select "Migration Data" whern you get the filetree)
4) On your PocketPC start the program "Active Sync" (still NOT connected to PC)!
5) Go to Menu/Options and DELETE the partnership (e.g. "Windows PC").
All Syncroniced data will be deleted on the PocketPC (Contacts, Appointments, etc..), but they are still available in OUTLOOK on your PC.
6) Thereafter delete your Partnership also on the PC (Active Sync - File/elete Mobile Device).
7) Now connect your PocketPC to the Desktop PC and the Outlook data will be syncronized again without error.
You can try to start at point 4) maybe you do not need a hardreset/backup again, try....
After upgrading you should always delete the partnerships....
-------------------------------------------------------------------------------------------
Now the upgrading steps. Make sure to check them all!
1) Unlock your device (CID and SIM). You have to CID unlock your device, or otherwise you cannot install a ROM that is e.g. not T-Mobile on an T-Mobile MDA.
How?
First of all you have to check what device (G3 or G4) and what Bootloaderversion (IPL/SPL) 1.x or > 2.x you have.
SOFT reset your device and note the red numbers that come.
If you have something like
IPL: 1.12 (or 1.12.000)
SPL 1.12.0000
you have an G3 device.
If IPL or SPL ends with 1 (e.g. 1.12.0001), you have an G4 device.
(0 is G3, 1 is G4)
Now check the first number.
1.12.xx is an Bootloader version 1 and 2.12.xx is 2, and so on.
I had an G3/Bootloader V1.x device, so I CANNOT say if it works for other devices.
For a G3 device you have to use Lockiwiz2b to SIM/CID unlock your device (http://forum.xda-developers.com/showthread.php?t=249474).
For a G4 device you have to use Lockiwiz3 to SIM/CID unlock (dont know if it works)
Its easier to unlock an 1.xx. device, so unlock before upgrading (even with an official ROM)
You will NOT loose your data as no HARD reset is necessary. Lockiwiz will not harm your system (if you do the right thing).
2) Now that you have CID unlocked your device, check your Bootloader Version. WM6 can only be installed with an V2 Bootloader (IPL/SPL 2.x.xxx) or higher!!.
So if you have e.g. IPL/SPL 1.12.xx, you first have to upgrade your device with a more recent WM5. I installed T-Mobile WM5 AKU 2.2 and thereafter i had 2.20.xx
3) WM6 cannot be installed over WM6 !!!
If you allready have a WM6 on your Charmer, DOWNGRADE to WM5, thereafter install the new or updated WM6!
4) Install ROM and enjoy.
If soething went wrong, you can save your device by going to Bootloader mode (push and hold camera button and reset with stylus. When you see the 3 colored Screen, release Camera Button. Then you are in bootloader mode and you can flash the original ROM vie your PC and ActiveSync (thats why you should have a WM5 ROM by the hand)
Summary:
1) Check what device you have (G3/G4)
2) Check what Bootloader Version you have (1.xx.xx or > 2.xx.xx)
3) Unlock CID (and SIM) with Lockiwiz02 (G3) or Lockiwiz03 (G4)
If this did not work, STOP here and forget it, nothing is lost until here! If your device is not CID unlocked you will kill your device with a "non vendor" ROM
4) If your bootloader (IPL/SIP) is 1.xx.xx, first upgrade to 2.xx.xx via an official WM5 ROM upgrade (or check XDA-Developers ROMs), otherwise device is dead
5) If you allready have an WM6 on your device, downgrade to WM5 first!
6) Install WM6 and enjoy.
Regards
Ridingshark
You dont need to CID unlock the device to upgrade to WM6. In fact, CID unlocking works only on 1.xx bootloader, and once you've bought a device with 2.xx, you can't go back.
That's why, instead of cid unlocking, you can just use NO_ID RUU, which bypasses checking the VendorID in the flashing process. You can find it here: http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Other than that, its a great thread. Making it sticky.
"WM6 can only be installed with an V2 Bootloader (IPL/SPL 2.x.xxx)!!."
Add: WM6 can be installed with an V3 Bootloader (IPL/SPL 3.x.xxx also
tuecan said:
"WM6 can only be installed with an V2 Bootloader (IPL/SPL 2.x.xxx)!!."
Add: WM6 can be installed with an V3 Bootloader (IPL/SPL 3.x.xxx also
Click to expand...
Click to collapse
Thanks, i changed it to V2.xx or higher (thats what i meant).
Tahnks also to vlodeck for the hind how to with V2.xx devices.
As i said, i can only tell you how it worked for me (Version 1.xx)
Regards R
Where can I find Lockiwiz3 to download?
I recommend lokiwiz2b instead of 3.
http://forum.xda-developers.com/showthread.php?t=249474
A FAQ for flashing vlodeck´s ROM, can you Download here
It is in English and German language with pictures
Can I Upgrade My BenQ P50 which is based on WM2003 to WM5/6?
Can I Upgrade My BenQ P50 which is based on WM2003 to WM5/6?
Can Anybody help out me with this fact or give me some information you know.plz.......
vlodeck said:
You dont need to CID unlock the device to upgrade to WM6. In fact, CID unlocking works only on 1.xx bootloader, and once you've bought a device with 2.xx, you can't go back.
That's why, instead of cid unlocking, you can just use NO_ID RUU, which bypasses checking the VendorID in the flashing process. You can find it here: http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Other than that, its a great thread. Making it sticky.
Click to expand...
Click to collapse
I would like to do it this way but I don't know how get nk.nbf for Charmer_Touch_ver._2.1 . Any help? Thank you in advance...
Your thread is very nice and help me a lot
Can you help me to upgrade bootloader from 1 to 2
Thank you very match in advance...
amoor1 said:
Your thread is very nice and help me a lot
Can you help me to upgrade bootloader from 1 to 2
Thank you very match in advance...
Click to expand...
Click to collapse
Hello amoor.
I also had Bootloader version 1 and simply used the official AKU 2.0 upgrade from T-Mobile from their homepage.
Thereafter it was Bootloader Version 2.
If you do not have an original ROM, you can use this WM5 (Do not worry that it is in english): http://www.tm-phonedownloads.com/files/RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship.exe.
Thereafter you can upgrade to WM6.
Regards R
hey, is there a known problem with the rar archive? i always get a crc error when i want to extract the os.nb file using "wm6" as pass
Thanks a lot! It works!
... I just upgraded my Charmer's ROM following your instructions. Perfect!http://forum.xda-developers.com/images/smilies/smile.gif
vlodeck said:
That's why, instead of cid unlocking, you can just use NO_ID RUU, which bypasses checking the VendorID in the flashing process. You can find it here: http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Click to expand...
Click to collapse
this link doesn't work anymore !! please upload it somewhere else
HTC Charmer noid
HTC Charmer noid
Hello,
I have WM6 to installt on my mda compact 2. How bekome I the language in German? Under regional Settings I Have German Others, but the language ist in english.
Thank you for your Answer.
The Menue is in english but the date was in german.??
Why don't you just install a German ROM by Ridingshark or Cyberdel. Then it will be German.
30.53 MB of storage -> OK - after UNhide -> ActiveSync Problem
Hello,
yes it works!!!! 30 MB storage - perfekt - Thank you.
Bevor UNhide 14 MB storage - but ActiveSync works perfect
After UNhide 30 MB storage - Active Sync dosen´t sync!!
Bevor and after unhide the same ROM (WM ROM 6.5 German (CTRLPDA))
all programs work fine BUT SYNC with ActiveSync dosen´t work.
ActiveSync tells me NO MEMORY on device?!?!? I can not sync any caleder or contacts!
Why?
Sorry for my bad english!!!
Greetings from Germany
seit1999
Who is CTRLPDA? Is it a forum member? We can't help you supporting ROMs not made in the forum cause we don't know the base then.
And what did you unhide? The extROM or what?
Hi All,
I had on my Athena the previous Michy Rom (2.04 with SPL 1.20) and when I saw the new version (4.00 with SPL 3.5):
http://forum.xda-developers.com/showthread.php?t=411371
I decided to install it. Like an idiot, I did not pay attention to the fact the SPL was different... I started the flash process and when I realized my error, it was too late.
The upgrade did not completed (as expected :-()) and now I am stuck with a corrupted bootloader screen, so I can't proceed (the device does not boot so I can't access ActiveSync).
Any way forward? Thanks for any hints!
Anubis
Update - I just tried this:
http://forum.xda-developers.com/showthread.php?t=326953
but without success. I get an Error [260] and the entire process stops.
Anubis1965 said:
Hi All,
I had on my Athena the previous Michy Rom (2.04 with SPL 1.20) and when I saw the new version (4.00 with SPL 3.5):
http://forum.xda-developers.com/showthread.php?t=411371
I decided to install it. Like an idiot, I did not pay attention to the fact the SPL was different... I started the flash process and when I realized my error, it was too late.
The upgrade did not completed (as expected :-()) and now I am stuck with a corrupted bootloader screen, so I can't proceed (the device does not boot so I can't access ActiveSync).
Any way forward? Thanks for any hints!
Anubis
Click to expand...
Click to collapse
look here
http://forum.xda-developers.com/showthread.php?t=405814
lakeman said:
look here
http://forum.xda-developers.com/showthread.php?t=405814
Click to expand...
Click to collapse
I have seen that thread. But the problem is different. I have also tried to reload a vanilla WM6 ROM but I cannot go past the corrupted bootloader part...
Anubis
Anubis1965 said:
I have seen that thread. But the problem is different. I have also tried to reload a vanilla WM6 ROM but I cannot go past the corrupted bootloader part...
Anubis
Click to expand...
Click to collapse
When you are in bootloader(three coloured screen) what do you see?
remove sim and sd card , hold camera button all the way in and press the reset button(on the back close to the battery cover)
If you see in bootloader mode ID showing somenting different than ATHE100 the solution is HERE http://forum.xda-developers.com/showthread.php?t=405814
I had the same problem! whell restart your pc and then connect the device to it. now start flashin an spl 1.20 rom. i did it and it worked! I hope i works for you too.
Cheers, Hirad
lakeman said:
When you are in bootloader(three coloured screen) what do you see?
remove sim and sd card , hold camera button all the way in and press the reset button(on the back close to the battery cover)
Click to expand...
Click to collapse
Thanks - already tried!
When I reset/hard-reset the phone (tried many ways) I see a garbled boot image (with random pixels here and there)... It is definitively not the usual bootloader with the information about the various ROM components and the "USB" text at the bottom.
Anubis
Solution!
I managed to do the same thing - had an old AP ROM with SPL 1.2 already installed then earlier today I tried to upgrade to the new Mitchy R4 SPL 3.5. I thought my Ameo was bricked, but after some pain it is now working again.
Here is what I did:
1) Enter bootloader mode using the very tricky Camera+Volume+Reset method.
2)
Follow exactly the steps in post 33 here:
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4
Note, I'm running Vista so to get the USB option to show in MTTY, I had to first open "Windows Mobile Device Center" in Control Panel then disable the USB.
Also, note you should find your MAC under the battery flap.
3) Now all you need to do is reset, enter the bootloader mode again, and re-try the ROM (PS, make sure you use the correct SPL version!
Hope this helps.
spoonter said:
I managed to do the same thing - had an old AP ROM with SPL 1.2 already installed then earlier today I tried to upgrade to the new Mitchy R4 SPL 3.5. I thought my Ameo was bricked, but after some pain it is now working again.
Here is what I did:
1) Enter bootloader mode using the very tricky Camera+Volume+Reset method.
2)
Follow exactly the steps in post 33 here:
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4
Note, I'm running Vista so to get the USB option to show in MTTY, I had to first open "Windows Mobile Device Center" in Control Panel then disable the USB.
Also, note you should find your MAC under the battery flap.
3) Now all you need to do is reset, enter the bootloader mode again, and re-try the ROM (PS, make sure you use the correct SPL version!
Hope this helps.
Click to expand...
Click to collapse
You are right and this is what sergiopi and I were referring to , specifically this post
http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
We were refering to the whole thread so you could learn the background.
However you are incorrect in your advice about how to enter bootloader
All you need to do is hold in the camera button and reset
spoonter said:
I managed to do the same thing - had an old AP ROM with SPL 1.2 already installed then earlier today I tried to upgrade to the new Mitchy R4 SPL 3.5. I thought my Ameo was bricked, but after some pain it is now working again.
Here is what I did:
1) Enter bootloader mode using the very tricky Camera+Volume+Reset method.
2)
Follow exactly the steps in post 33 here:
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4
Note, I'm running Vista so to get the USB option to show in MTTY, I had to first open "Windows Mobile Device Center" in Control Panel then disable the USB.
Also, note you should find your MAC under the battery flap.
3) Now all you need to do is reset, enter the bootloader mode again, and re-try the ROM (PS, make sure you use the correct SPL version!
Hope this helps.
Click to expand...
Click to collapse
Thanks - you are giving me some hope! I am on a business trip now and my Athena is at home, but I will try that as soon as I am back
Anubis