i have an xda for sale the screen is ok but used, the only problem is the mother board where it connects to the screen it is damaged, i also have the docking station and a car adaptor the case has dents as it has been my work phone for 2 years. now upgraded. £40 will get it all including postage in uk.
neil
Hi
I would like to know what memory resides in that xda?
And if is possible you to sell it to portugal????
Thanks in advance 8)
its an early model (wallaby) been used it has scratches on the case, but served me well untill i played with it after buying my new one, hense the damade to the connection on the mother board to the screen.
i hope this helps. yes will send i want £20 plus postage. it also has origional cradle, head phones and car charger.
I want to buy your xda
If you are interested, contact me!.
hi there
i had the xda mini s cradle by brodit but im needing the front cradle part for the TyTN. anyone got any experience of this? or does it exist yet as i cannot seem to find one?
errmm.... i'm sure someone has posted a link to a site offering these...
Brodit HTC TyTn etc Holders now shipping
Or if you need a few more places that sell them in the UK then here they are:
Clove Technology - TyTn Car Holders
MobileFun Tytn - Car Holders
Inkino - TyTn Accessories
GPSforLess - TyTn Accessories
cheers for the info!
I have been having trouble getting hold of a simple phone craddle that attaches to the windscreen that can hold my MDA Vario II while driving.
I purchased afew Herbert Richter kits from various eBay supplier (see this example). The listing clearly says that it is made for my phone but when they arrive they do not fit. They appear to be made to measure for a MDA Vario III (HTC TYTN2), my phone is too chunky to be held.
Do Herbert Richter actually still supply kits for my phone? All the eBay sellers appear to be unaware they are supplying the wrong craddle. I have sent two back already asking for a refund, explaining the situation but they seem unable to help.
Any advice please..?
I bought a cheap holder from dealextreme from mine. See link below.
http://www.dealextreme.com/products.dx/category.704
The one I got was the 3rd one along $7.83 and it holds it really well.
Even though they're based in Hong Kong, they shipped to the UK free of charge. It took a couple of weeks to arrive. I've used them quite a few times before and never had a problem.
Has anyone seen a cradle for the TD2 yet? I've got a Brodit mount in my car with the cradle for the Kaiser, but I'm after a new one now.
Received this from Brodit when I asked about a D2 mount:
"Hi!
For the moment we can’t say any clear date but please check the web within a couple of weeks.
Best Regards"
galvinize said:
Received this from Brodit when I asked about a D2 mount:
"Hi!
For the moment we can’t say any clear date but please check the web within a couple of weeks.
Best Regards"
Click to expand...
Click to collapse
Got the same answer, more people email them then they'll know there's demand out there and get a move on.
brodit cradles available
cactusbob said:
Has anyone seen a cradle for the TD2 yet? I've got a Brodit mount in my car with the cradle for the Kaiser, but I'm after a new one now.
Click to expand...
Click to collapse
just found the new cradles available on the brodit site (512011 Active Holder, Tilt Swivel
With cigg-plug. and many others)
No info about price and delivery time yet
Nice spot, have emailed a few suppliers asking for price and dates.
Just Pre-Ordered Mine
Hi
Just ordered mine from DSL.
http://www.dsldevelopments.com/brodit/Holder/HTC+Touch Diamond 2 T5353-Brodit-Holder.asp
Can't wait till it lands.
Looking at the picture on the site, it's not obvious exactly what part of the dashboard it attaches to and how?
hotlips69 said:
Looking at the picture on the site, it's not obvious exactly what part of the dashboard it attaches to and how?
Click to expand...
Click to collapse
Brodit holders come in two parts, a custom bit that holds the phone which is unique for each phone, and the proclip bit designed for your car. Where exactly on the dash it fits depends on which which car you have and which proclip you buy for your car. You're best off calling to find out, although most of them seem to have an option to fit over the central air vents.
Hi,
Any update??
I have preordered from mobilefun but still nothing.
Hi,
Got my cradle today from mobilefun. Just need a reliable navigation software.
Ordered mine from mobilefun yesterday, came this morning, fits great
cactusbob said:
Ordered mine from mobilefun yesterday, came this morning, fits great
Click to expand...
Click to collapse
What one did you get?, and did you get a in car charger with it?
I'm looking for one that attaches to the dash/air ventthat will also support a chrger.
Was looking at the Brodit one, and although they do look quite nice, £50+ for the holder and clip is a little steep in my mind.
I got the passive one, I already have a HTC car charger (with a pretty blue light). I only got the phone part as I already had the vent mount for my car from my previous phone. Thats the benefit really - you only need to change the phone bit. The Brodit mounts are a bit expensive but the quality is excellent and the phone fits really well
cactusbob said:
I got the passive one, I already have a HTC car charger (with a pretty blue light). I only got the phone part as I already had the vent mount for my car from my previous phone. Thats the benefit really - you only need to change the phone bit. The Brodit mounts are a bit expensive but the quality is excellent and the phone fits really well
Click to expand...
Click to collapse
Cheers - one last question - I see the tilt and swivel, but to the rotate though 90°, so the phone can be viewed horitontally (i.e. when using it as a Sat Nav)?
Yes the mount is in two parts, the bit that attached to the car and the bit that the phone goes in. The connection between the two is a swivel joint
I've just ordered one HTC Touch Diamond2 / T5353 Car Upgrade Kit - CU S240 from here, better says - preordered.
It says it will be avaible in 10 days or more...
Is this site reliable?
mirmarmms said:
I've just ordered one HTC Touch Diamond2 / T5353 Car Upgrade Kit - CU S240 from here, better says - preordered.
It says it will be avaible in 10 days or more...
Is this site reliable?
Click to expand...
Click to collapse
I have this item ordered from mobilefun.co.uk, they say 2 - 3 days and it'll be in stock, but I wouldn't be so sure about that.
This is the same type of car kit I used for my Diamond 1, and that one worked very well, so I don't mind waiting for this one.
Oh, expansys says they won't have this car kit in stock until June 23rd.. so, I'm prepared to be waiting anything up until then!
still not avaible CU S240...
received today from:
http://www.sv2i.com/search/fiche.asp?ref_produit=BT-CMS-HD2
http://www.sv2i.com/search/fiche.asp?ref_produit=PDA-3BHTD2F41
I have just bought the proclip and passive holder from dsl, then I bought a car charger from ebay, I will post what they are like as soon as they arrive, and if I'm clever enough to fit them in my car.
11/06/09
The cradle arrived today, it turned out that I actually ordered the wrong proclip, I intended to buy the one that bind to the right A/C vent of my (RHD) Corsa, but instead I ordered one that binds onto the bottom left of the dashboard. As it was though, I actually think the ordering error turned out for the better, the postion of the phone was still very readable, easily reachable, and it means that when I plug in the phone charger I won't see a wire dangling all the way across my dashboard, which would be unsightly as well as inconveineant. I would recommend this position of proclip for everyone, I know it seems strange that you need to look down at the phone, but when I took it out for a spin today it worked great.
Unsuprisingly, the cradle itself was fantastic way worth the extra money I paid for, the phone actually slips into position, I was sceptical at first about perfect fits, but the fit really was impeccable.
The fitting process was simple and straightforward (if I can do it anyone can) but requires a bit of brute force, but in my opinion that just came to show how sturdy the kit is. You know it's not going to go anywhere.
Today I asked Brodit (the company doing the ProClip mounts) about a mount for the HTC Flyer. The response was that such a mount will be ready soon, hopefully by the end of next week, and then some time to get it to your favourite supplier.
I'll buy one as soon as possible and let you know what I think about it.
I'm also waiting for GelaSkins to do a skin for the Flyer, anyone heard of their plans?
Harri said:
Today I asked Brodit (the company doing the ProClip mounts) about a mount for the HTC Flyer. The response was that such a mount will be ready soon, hopefully by the end of next week, and then some time to get it to your favourite supplier.
I'll buy one as soon as possible and let you know what I think about it.
I'm also waiting for GelaSkins to do a skin for the Flyer, anyone heard of their plans?
Click to expand...
Click to collapse
Hmm... I have Proclip for my Desire Z in my car can't imagine the Flyer fitting in... Post pics. Beware though most Proclip holders only for the naked device... With a film skin.
arkon 7" tablet holder works great
I am using arkon 7" tablet holder from Amazon for $17 . The nice thing is the holder fits in the base I already had for my Droid. I would post a link but I'm a noob.
Harri said:
Today I asked Brodit (the company doing the ProClip mounts) about a mount for the HTC Flyer. The response was that such a mount will be ready soon, hopefully by the end of next week, and then some time to get it to your favourite supplier.
I'll buy one as soon as possible and let you know what I think about it.
I'm also waiting for GelaSkins to do a skin for the Flyer, anyone heard of their plans?
Click to expand...
Click to collapse
Somthing new on this? I had best expiriences with Brodit/ProClip in the past, so I would like to take this holder for my new HTC Flyer. On the official site I didn`t found any information about holder for our device...
Holder for Flyer
There is info about holder for Flyer on Brodit's site. But only passive . And no photo... Waiting...
Here's the Brodit page for the passive Flyer holder. Good sign: pen holder.
http://brodit.se/product.html?id=511265
Got an e-mail from the german Brodit retailer brodit-shop.de - the HTC Flyer mount will be available for order from the middle of this week and the delivery time - 3 weeks.
Dr.Martin said:
Got an e-mail from the german Brodit retailer brodit-shop.de - the HTC Flyer mount will be available for order from the middle of this week and the delivery time - 3 weeks.
Click to expand...
Click to collapse
That's ridicolous!
Why should it be available in this week and then have a delivery time of 3 weeks?
Damn!
I am also trying to get one somewhere.
Please let me know if you find a retailer that actually can also deliver it.
Thanks!
I just order that here - ...mountonus.com. Can't post links...
There is a range of Brodit holders available, though still no Brodit active holder with car charger.
I got my passive holder today (from a Swedish reseller, I live in Sweden).
Pen holder is good, holds the pen firmly.
I paid approx €40 for it. I found sellers in the UK (including mountonus) indicating a price of £25, called to Brodit to complain about the price difference but they didn't comment. My reseller thinks that a price of £25 is incorrect (but I've seen more than one with that price on the internet).
Have anyone had a price confirmed?
The passive variants are now available on ProClipUSA for US customers:
http://www.proclipusa.com/default.a...e_holder=false&p_pageid=1&dtype=&leftorright=
Got my passive holder yesterday from navisys.de (Germany) for 24,95€