Related
Hey guys,
I'm trying to find a bluetooth headset that will work clearly and cleanly with my xda iis.
I've tried the jabra 250 whilst in the o2 shop and the chap there blamed the crackly poor quality sound on the flourescent lights. Whatever!
Could we start a thread of known working bluetooth headsets for the blue angel or is there a list somewhere else?
I'm becoming quite tired of trying to find a clear working device.
Thanks.
I'm using a Nextlink BlueSpoon without any problems.
Motorola HS810 here, works fine.
i use the BodyGlove Bluetooth Headset.
No Complaints.
i use the Sony-Ericsson HBH-602 Headset, it works fine.
I have used the following:
Ultra Mini Bluetooth Headset - Crackle City
Sony Ericsson HBH-65 - Worked Great
Nextlink Bluespoon AX - Crackly City
Sony Ericsson HBH-600 - Crackle someitmes - but good otherwise.
Used BT800 with Telecom Harrier and it doesn't work properly.
Paired alright and it seems like the mic part of the headset is not working.
I can hear people talking over the phone but they can't hear me at all.
Upgraded to BT3900 and still doesn't work.
Tried with another BT800 and the same result.
Everything works but not the mic.
I bought the Motorola HS850 yesterday and it has arrived at 930am thanks to www.i2020.co.uk
Took it out the box, charged it for an hour (not the recommended two), went into bluetooth manager and created a new headset connection.
Within 60 seconds I now have a perfectly working bluetooth device. Just called a friend and they didn't even know I was on a bluetooth headset.
A big THUMBS DOWN :evil: for the Jabra models and a big THUMBS UP for the Motorola models!
Thanks all for your input.
m_O_O_m said:
Used BT800 with Telecom Harrier and it doesn't work properly.
Paired alright and it seems like the mic part of the headset is not working.
I can hear people talking over the phone but they can't hear me at all.
Upgraded to BT3900 and still doesn't work.
Tried with another BT800 and the same result.
Everything works but not the mic.
Click to expand...
Click to collapse
There's a fix for BT800 on the 1.40 ext rom from i-mate, u should try it...
swoopster said:
I bought the Motorola HS850 yesterday and it has arrived at 930am thanks to www.i2020.co.uk
Took it out the box, charged it for an hour (not the recommended two), went into bluetooth manager and created a new headset connection.
Within 60 seconds I now have a perfectly working bluetooth device. Just called a friend and they didn't even know I was on a bluetooth headset.
A big THUMBS DOWN :evil: for the Jabra models and a big THUMBS UP for the Motorola models!
Thanks all for your input.
Click to expand...
Click to collapse
I'm glad you said that coz I ordered an HS850 today
There's a fix for BT800 on the 1.40 ext rom from i-mate, u should try it.
Click to expand...
Click to collapse
I'd like to but my one is a Telecom Harrier. I just can't find the way to update to 1.40 on my device.
Telecom Harrier is a CDMA/EVDO version and it doesn't use SIM Cards. No WiFi too...
:x
I logged into www.clubimate.com and tried to register but it says my ESN number is either invalid or already been registered.
:?
m_O_O_m said:
There's a fix for BT800 on the 1.40 ext rom from i-mate, u should try it.
Click to expand...
Click to collapse
I'd like to but my one is a Telecom Harrier. I just can't find the way to update to 1.40 on my device.
Telecom Harrier is a CDMA/EVDO version and it doesn't use SIM Cards. No WiFi too...
:x
I logged into www.clubimate.com and tried to register but it says my ESN number is either invalid or already been registered.
:?
Click to expand...
Click to collapse
ftp://xda:[email protected]_ROM_140176_WWE/Default_BA_Fix_Jabra800.CAB
I downloaded and installed it. But it ain't working...!!!!!!! doh!!!!! :evil:
I will try re-pairing the device and see how it goes.
I deleted the profile and re-paired it but it ain't working.
It pairs alright and I can hear others talking but they can't hear me.
It might be my handset or the headset with mic faulty.
I will go get another one and try. If it still doesn't with my harrier, I will just wait and seek for a new model.
Thanks a lot for your help dude.
Hi,
just got the new Motorola HS 850, till now works great.
Sound is good, very little echo.
Using ROM 1.40 and Radio 1.13
On my carkit (Bluetooth Lintech for Cark-91) a lot of echo.
So far so good.
Regards,
Max
I've used both the Logitech Mobile Freedom and their Mobile Pro headsets with no problems.
Personally, I prefer the Mobile Pro because the ear clip mechanism allows you to clip the headset to a shirt.
i have the hbh 660 and it works great. you can even see who is calling you on the lcd of the headset... ooooh yeah
I use this one....
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=6402429860&rd=1&sspagename=STRK:MEWN:IT&rd=1
and its A PILE OF PANTS!!!!!!!!!!!
I get one call out of it and then anything after it asks for the pin, which when entered does sod all. The amount of times I've nearly crashed in a blind rage with this useless piece of equipement....
....Anyone know of anything that might fix this????? Or is it a lost cause???
Cheers
H
Hi! I have Motorola HT 820 - this device work fine (Stereo headset, handsfree)
wireless modem applet fixes BT sound quality
On my SX-66, I have found that if I connect the Jabra BT200 and activate it (press the pickup/hangup button so the PDA sound is in the headset), then run the Wireless Modem applet (\Windows\WModem.exe), "Start" a connection, then exit the applet with the "ok" button, the sound quality will magically correct itself!
This confirms to me that the sound quality problem is a software issue. Every BT headset would work if whatever the Wireless Modem applet does was integrated into the connection routine.
This is not a great workaround because it take about 1 hour to prepare for a phone call :roll: as the wireless resets and is stubborn about reconnecting. It isn't just the reset that fixes the problem because just reseting the wireless has never helped my sound quality problems.
For now, it is best to buy a headset that already works, but there is hope that in the future all BT handsfree devices may work correctly.
Ok...
I haven't found anyone else that would admit to trying these headphones with my phone (Dopod 838 Pro).
The headphones themselves are pretty cool. They fit pretty well, don't look toooo dorky, and the buttons click nicely etc. I haven't had them go flat on me yet. They could have come with a protective case though, and you have to take the microphone off to charge them, and I'm always afraid I will lose it.
When I first got them, they sounded crap. AM radio crap. I updated them to the latest firmware from the BlueAnt website (what a drama).
Tested, and they worked ok with the dongle - not exactly hifi sound, but the quality was ok to listen to.
Next I called BlueAnt HQ here in Australia, and after getting put through to a tech support guy he told me "They should work fine, I tried them with an iMate JasJam - no problems. Do a reset and try re-pairing them" (Duh).
Then I called the Dopod support line in Australia. During business hours. It goes through to an answering machine that doesn't even have an introduction message. Left a message. No reply.
Just as I was about to return them, I found the A2DP software tweak/patch on the wiki. First let me just say:
AAARRRGHHHH! What they hell are Microsoft thinking? Why have a registry setting \HKLM\StereoMusic\MakeMyMusicSoundLikeCrap=1 setting in the first place, and THEN why ship all phones with that enabled as the default? How many people have returned perfectly functioning Bluetooth headsets because of that? STUPID. I reckon Microsoft/HTC owe BlueAnt (and others) a truck load of money.
Secondly, that helps. Music is now stereo. I've been using them every day for a few weeks now. The bad news:
1) The quality is still very poor. There is a metallic hissing/sizzling/sibilance sound, especially noticeable on female vocals, which sounds (to me) exactly like a poor bitrate encoding error. The quality is much worse than when I pair it to the dongle it came with. I suspect it is the phone (or the MS BT stack) at fault not the headset. I would really like to be able to fix this.
2) With Wifi enabled, the music cuts out every few seconds. Unlistenable.
3) With Wifi disabled, I get the occasional glitch. I can live with that (if I must)
4) Using the headset profile during a phonecall, the sound I hear isn't too bad (a little muffled) but people tell me I sound really distant and hard to hear.
5) The AVRCP support is dodgy. Most of the time it works. Often when I first hit Play, it plays for a few seconds and then stops. I have to hit Play/Pause again and it starts. Track seek and volume up/down seem to work well. Answering a phone seemed hit and miss at first, but seems to mostly be working now. Not sure if this is the phone or the headset.
The iMate JasJam listed in the compatitabilty section of the BlueAnt website, but the Dopod 838 Pro is not. I emailed BlueAnt with my findings, and suggested they add the A2DP hack to their FAQ for other users. Hasn't appeared yet.
So, my questions:
1) Has anyone tried these headphones on a Hermes device? Does your experience mirror mine? Or is one of my devices faulty? Is the voice quality on the headset profile ok?
2) Is there a Widcomm (?) stack that works on the Hermes that may fix the problem, or...is it likely to be any better with WM6?
3) Does anyone have an A2DP headset of any brand working on a Hermes with "Crystal clear CD quality sound" like it says on the box the headphones came in. If so, what brand? If it is possible to get a good sound out of the MS BT stack, it might be worth pushing BlueAnt to release a new firmware to fix the issues.
4) Would a Bluetooth 2.0 headset give a better result? (Is it a bandwidth issue?)
Any replies would be helpful.
Thanks guys,
Zilch.
Yep I have an X5 unit connected to my Imate Jasjam and have not updated the firmware.
Yes it did skip when I first tried it but after a bit of experimenting, discovered turning off WiFi fixed it.
Yes it was mono till I did the reg hack to make it stereo.
No I don't get any hiss and think the quality is great (I know this is subjective but I tested female vocals as you suggested and they were great -Croncrete Blond, Eurythmics, Dyvinals, and even Chris Issac)
You may want to go here http://blogs.msdn.com/windowsmobile/default.aspx to realise the complications/dificulties the Ms WM guys are up against. I am sure they had a good reason to set the default to mono (maybe some devices didn't work at all with it set to stereo)
I would have to suggest there are other issues with your setup that are compromising the playback quality. I honsetly am impressed.
I don't use it as a phone headset as I use the X3 model to connect to two phones (I like Blue Ant stuff), so I can't comment on the mic quality.
When you consider that most people are having a nightmare with their stereo headsets (read the Widicom thread, if you have a lifetime to spare), then I am totally impressed with Blue Ant.
Sorry to have to disagree with you.
esseff said:
Yep I have an X5 unit connected to my Imate Jasjam and have not updated the firmware.
Click to expand...
Click to collapse
Thanks for the reply!
Yes it did skip when I first tried it but after a bit of experimenting, discovered turning off WiFi fixed it.
Yes it was mono till I did the reg hack to make it stereo.
No I don't get any hiss and think the quality is great (I know this is subjective but I tested female vocals as you suggested and they were great -Croncrete Blond, Eurythmics, Dyvinals, and even Chris Issac)
Click to expand...
Click to collapse
Hmm...ok. Are you saying that the quality from your JasJam is the same as if you used the supplied Bluetooth Dongle that comes with the X5? (That's my goal currently)
If so, maybe there is some sort of configuration difference between the JasJam and the Dopod. (The JasJam is on the compatibility list, and the support guy did say he had used it ok)
I'm not just being an anal hifi buff here. The sound quality is obviously poor, and quite noticeable. You probably don't have it, but if you listen to the track 'Lithum' by 'Evanescense' it makes you cringe when the vocals come in (the piano sounds relatively normal. It's noticable in all tracks, but specifically in tracks like that.
Did you use this utility to tweak the A2DP sound settings? Or edit the registry manually (if so, can you tell me what settings you used?)
You may want to go here http://blogs.msdn.com/windowsmobile/default.aspx to realise the complications/dificulties the Ms WM guys are up against. I am sure they had a good reason to set the default to mono (maybe some devices didn't work at all with it set to stereo)
Click to expand...
Click to collapse
I don't really accept that as a valid reason. Sure they have problems. The least they could do is make a user tweakable UI to change that setting. It's not acceptable to have a protocol designed for stereo music set to mono and no way for a user to change it.
I would have to suggest there are other issues with your setup that are compromising the playback quality. I honsetly am impressed.
Click to expand...
Click to collapse
Ok, good to know. I haven't given up yet!
Sorry to have to disagree with you.
Click to expand...
Click to collapse
Not at all! Thanks again for the reply.
Edit: If you get a chance, can you do me a favour and check if yours is the H1 or the H4 model? (First two digits of the serial number, under the battery of the left headphone).
Zilch.
esseff said:
Yep I have an X5 unit connected to my Imate Jasjam and have not updated the firmware.
You may want to go here http://blogs.msdn.com/windowsmobile/default.aspx to realise the complications/dificulties the Ms WM guys are up against. I am sure they had a good reason to set the default to mono (maybe some devices didn't work at all with it set to stereo).
Click to expand...
Click to collapse
Ehh... they could pay up and get a proper BT-stack from Widcomm....
Zilch said:
Thanks for the reply!
Hmm...ok. Are you saying that the quality from your JasJam is the same as if you used the supplied Bluetooth Dongle that comes with the X5? (That's my goal currently)
If so, maybe there is some sort of configuration difference between the JasJam and the Dopod. (The JasJam is on the compatibility list, and the support guy did say he had used it ok)
I'm not just being an anal hifi buff here. The sound quality is obviously poor, and quite noticeable. You probably don't have it, but if you listen to the track 'Lithum' by 'Evanescense' it makes you cringe when the vocals come in (the piano sounds relatively normal. It's noticable in all tracks, but specifically in tracks like that.
Did you use this utility to tweak the A2DP sound settings? Or edit the registry manually (if so, can you tell me what settings you used?)
I don't really accept that as a valid reason. Sure they have problems. The least they could do is make a user tweakable UI to change that setting. It's not acceptable to have a protocol designed for stereo music set to mono and no way for a user to change it.
Ok, good to know. I haven't given up yet!
Not at all! Thanks again for the reply.
Edit: If you get a chance, can you do me a favour and check if yours is the H1 or the H4 model? (First two digits of the serial number, under the battery of the left headphone).
Zilch.
Click to expand...
Click to collapse
I haven't used the dongle for a long time but when I did it was thru my HiFi playing CDs not MP3 so there may have been a difference in quality but never bothered to compare as I never had a problem with the playback quality from my Imate.
I did a manual reg fix using the wiki recommendations of 48 and 0.
I have model H1.
You may be right that the Imate is configured a little differently but I also run it very clean.
I have so few problems compared to what I read that I feel embarressed that I'm so lucky. As an IT consultant I just luv it as my work phone - I use VPN, Terminal Services, WiFi, Push Email, internet access, etc... and it's a phone! Constantly impressed.
Rant>
Can't believe the way people on this forum butcher their devices and end up with something that is full of broken things... oh but I'm sooooo cool because I have WMXL .20.1 with radio rom 6.47.803 - don't care that nothing works anymore. Juss wanna be soooo cool.
esseff said:
I did a manual reg fix using the wiki recommendations of 48 and 0.
Click to expand...
Click to collapse
Did you set a bitrate?
I have model H1.
Click to expand...
Click to collapse
I wonder if this is the difference. Mine is an H4 version.
You may be right that the Imate is configured a little differently but I also run it very clean.
Click to expand...
Click to collapse
Just for the record, I got the headphones a few days after I got the phone. The only thing I had done was put my SIM card in, copy a few MP3s and change the default theme (since the Dopod one is grey).
There were no mods/hacks/cooked ROMS/tweaks etc. Just the ROM it came with which is also the latest version on the Dopod website. My phone is supplied to me by work, so I need it to be as reliable as possible - I can't afford to mess around with it. (Which is one of the reasons I resent having to edit the registry to get some stereo headphones to play in stereo)
Note: Today I have a few apps installed. An RSS reader, train timetable, TomTom etc. Only hack is the registry change for A2DP, and a util which sets the soft input to Block Recognition mode on startup. None of these seem to have affected the quality of the A2DP stream in any way though.
Unless I can try my headphones with someone's JasJam, or another Dopod I'm not sure I'm going to be able to narrow down the issue. I think it has to be a difference in the X4 hardware/firmware or an issue with the Dopod ROM (compared to the JasJam one)
I have so few problems compared to what I read that I feel embarressed that I'm so lucky. As an IT consultant I just luv it as my work phone - I use VPN, Terminal Services, WiFi, Push Email, internet access, etc... and it's a phone! Constantly impressed.
Click to expand...
Click to collapse
I have it as a work phone too - and work in IT. I haven't had any issues with it except Windows Media Player losing the tracks on the storage card, and the device locking up from time to time (this is always when I am not using it - it is turned off and does not turn back on). Overall it's a great phone!
Rant>
Can't believe the way people on this forum butcher their devices and end up with something that is full of broken things... oh but I'm sooooo cool because I have WMXL .20.1 with radio rom 6.47.803 - don't care that nothing works anymore. Juss wanna be soooo cool.
Click to expand...
Click to collapse
Dude. You are hanging around the xda-developers forum. Each to their own. Tweaking is fun for these guys. It's like mechanics cars. You and I are in a different position as our phones are a work tools and have to be reliable. I'm more than happy to benefit from people experiences hacking theirs though
Zilch.
esseff said:
I don't use it as a phone headset as I use the X3 model to connect to two phones (I like Blue Ant stuff), so I can't comment on the mic quality.
Click to expand...
Click to collapse
I was actually considering getting an X3 as well (they look cool), but I will wait until I have worked out the issues with my X5.
Just thinking about this. How does it work? You are bopping along to your perfect A2DP sound, and you somehow hear the phone ringing, so you take off the stereo headphones, get your X3 out of your pocket, insert it in your ear, and answer the phone!?
Zilch.
Zilch said:
I was actually considering getting an X3 as well (they look cool), but I will wait until I have worked out the issues with my X5.
Just thinking about this. How does it work? You are bopping along to your perfect A2DP sound, and you somehow hear the phone ringing, so you take off the stereo headphones, get your X3 out of your pocket, insert it in your ear, and answer the phone!?
Zilch.
Click to expand...
Click to collapse
Don't use X5 at work, but when I'm relaxing at the beach or around the pool. Use X3 connected to my Imate and my private phone at work. AT the time it was the only headset that would connect to more than one device and works great.
>
Dude. You are hanging around the xda-developers forum. Each to their own. Tweaking is fun for these guys. It's like mechanics cars. You and I are in a different position as our phones are a work tools and have to be reliable. I'm more than happy to benefit from people experiences hacking theirs though
Zilch.
>
... but i shake my head in disbelief when I read some of the things ppl do.
Kupur was applauding an admitted newbie who, after 1 hr of owning his device decided it wasn't right and flashed it with some cooked rom, upgraded the radio, and SIM/CID unlocked it!!
How can this guy have any point of referance? How can he know he has made an improvement if he never bothered to use it properly in it's std state? And he will no doubt curse and abuse Ms and HTC for producing crap hardware and software.
As you say each to their own but it's hard for me to understand some ppls mentality.
esseff said:
>
... but i shake my head in disbelief when I read some of the things ppl do.
Kupur was applauding an admitted newbie who, after 1 hr of owning his device decided it wasn't right and flashed it with some cooked rom, upgraded the radio, and SIM/CID unlocked it!!
Click to expand...
Click to collapse
If I was tempted to do that, right after getting it is probably when I would do it. Reloading all your stuff sucks. Plus if he needed it SIM unlocked to use it that could be why.
Plus, what a better way to learn than bricking a $900 brand new phone?
Zilch.
Zilch said:
So, my questions:
1) Has anyone tried these headphones on a Hermes device? Does your experience mirror mine? Or is one of my devices faulty? Is the voice quality on the headset profile ok?
...
3) Does anyone have an A2DP headset of any brand working on a Hermes with "Crystal clear CD quality sound" like it says on the box the headphones came in. If so, what brand? If it is possible to get a good sound out of the MS BT stack, it might be worth pushing BlueAnt to release a new firmware to fix the issues.
Click to expand...
Click to collapse
To answer my own question in case anyone else is having this issue...it's all fixed with the official WM6 ROM. Works perfectly. (Except for the dropouts when WiFi is enabled)
yeah I have them and have had for quite some time now ... first used them with my Eten G00 then the G500+, then I changed phones to a nokia n73 and things didn't seem so good. anymore I lost the remote functions and even though I like the new phone I missed some things like nav and others so i went back tot he g00+. I have now updated to the HTC Tytn II I think sim to your hermes ....
I find nothing wrong the x5 controls a re great and quality is exceptable... I have no issues with Wifi.. I have the updated firmeware on my x5 and the stock firmware on my tytn II..
I also have a hs850 paired to the device the only thing I deslike on the hole issue is that everytime I use the x6 I have to fiddle around getting them to resume the pairing.
where as my hs-850 I just turn on blue tooth and turn on the headset... and off we go...
I have the x5 set as default headset and default stereo headset... the hs850 is just another device listed and pairs up soon as its turned on.
Can someone post me the headset firmware and how to use it?
SunnyRio said:
Can someone post me the headset firmware and how to use it?
Click to expand...
Click to collapse
I got it from blueant.com I think. (Was some time ago). It was updating the phone that fixed the issues though.
Zilch said:
I got it from blueant.com I think. (Was some time ago). It was updating the phone that fixed the issues though.
Click to expand...
Click to collapse
I can't seem to find it. can you upload it somewhere? Or give me a link?
Hi guys,
I´m in Hong Kong and just got my Dopod U1000, since my last PDA was the Hermes and Universal (both with WM6), I would like to know if there is any leaked rom available ? If not I will ask to my friends at HTC and MS
Another point is, The only way to make calls is using a headset? Seriously this was unexpected to me... I will receive a bluetooth headset from Plantronics for free (local promo), but just in case, There is any other way to use the phone? (without the speakerphone)?
tks!
Phelipe
i am waitting too..........
Yes this also puzzled me. How is it possible that the speakerphone cannot be de-activated? Sometimes when I forget to bring my bt headset the phone rings, I answer the call and everyone of my collegues listen to my phone conversation, due to speakerphone active!
Thanks and waiting
Saulo866
hardware
I think that the Ameo hasn't got the hardware to be used as a "normal" phone (e.g the small ear-speakers used by a "normal" phone).
That's quite shocking. I never knew the Athena could not be answered as a normal mobile phone.
Packet 3 said:
That's quite shocking. I never knew the Athena could not be answered as a normal mobile phone.
Click to expand...
Click to collapse
if you don't know this, then you haven't done enough research
to be fair i have not seen any video or other reviews where they go over the fact that you can talk on it like a normal phone. back to the question at hand, what i do is turn down the volume all the way and then talk on it like a normal phone people can still here just not as will and not as far away but i still use a bluetooth
FYI - the volume settings are different when your on or off the phone so if you turn down the volume when your on the phone talking, it will still be loud when you get off the phone.
u can make/answer the call without earphone.
the internal speaker will be on in this case. it means people around u also can hear your call.
i had once, it's a quite embarrassing when people are watching u while u r talking to a brick. :-D
^true....its really embarrassing...
It happened to me once in an elevator...
Always keep your BT headset with your Athena...
^
^
hahahahaha LOL...tat sucked
(my english is bad... so "hahahaha LOL" is enough to convey my reply to you)
so i started out with a brand new 8525 and decided to get my own set of blueteeth n ended up with the southwing sa505. i liked em, they work great, but i've now run into a new prob....the once good working mic has now decided to play a strange game with me.
the mic won't work(in or out) in ANY phone call, BUT using the note recorder i get a crisp, clean pissed off voice of myself...joy
i've taken it apart to check connections and all is fine.
upgraded the radio n did all the other crud(hardspl, unlock, blah).
upgraded from wm5 to wm6black.
no change, mic works only in note recorder, never during a call.
anybody got an idea?
there only a $30 pair of phones, but its still a waste when it could be repaired(less its something in the headset software)
Think it might be the headset...
osDro said:
so i started out with a brand new 8525 and decided to get my own set of blueteeth n ended up with the southwing sa505. i liked em, they work great, but i've now run into a new prob....the once good working mic has now decided to play a strange game with me.
the mic won't work(in or out) in ANY phone call, BUT using the note recorder i get a crisp, clean pissed off voice of myself...joy
i've taken it apart to check connections and all is fine.
upgraded the radio n did all the other crud(hardspl, unlock, blah).
upgraded from wm5 to wm6black.
no change, mic works only in note recorder, never during a call.
anybody got an idea?
there only a $30 pair of phones, but its still a waste when it could be repaired(less its something in the headset software)
Click to expand...
Click to collapse
I use a Plantronics 855, and I've never had any problem with it. Also used the V-655, and V-715 from Plantronics as well. Perhaps a different headset will solve your problem. Good Luck!
I use a sony ericsson pv705 with my 8525 and it works fine, not the best headset but still does its job!
I have never had a problem with the plantronics 510 or 520
No probs here with the Motorola H700 either.
Hi,
Since i changed over to wp7 i cant seem to get the hands free with the car kit working very well, i can hear people perfectly but they cannot hear me sounds distorted etc.
Has anyone else come across this issue?
I have done lots of searches but cannot find any bluetooth problems with the hd2 and wp7
Any help would be apprieciated
I'm having exactly the same issues. It's really annoying and was hoping that the NoDo update would fix this.
Still No Good
I updated to the latest wp7 rom and the carkit still is not working very well with the hd2
No one can hear me properly its driving me nuts and i really need this working
Are there any reg tweaks or anything available?
thanks
Do you get it with all carkits? What sort of carkit do you use? I use a Parrot CK3100.
I use blueant st3 and don't have any problem with it. Phone books transers to it just fine. Sounds both ways are OK. With old 7004 and NODO.
I have a Stereo unit from hongkong with bluetooth built in.
It worked perfect once i had done the registry tweak on win6.5 but not having much luck with wp7.
its only they cant hear me clearly either distorted or just cant hear me, i can here them perfectly.
As said I got a parrot CK3100. I think it has something todo with the noise suppression. When I call someone on a landline who has no noise in the background, he can hear me very clear. When I call someone who is also in a car or with a lot of background noise, he can't hear me. He tells me my sound is choppy and drops away all of the time.