Hi alll, pls help .
My sx56 work very good 2years ago untill last week.
proplem is " pls insert your simcard"
- move out the sim chip- do a hard resert- insert the sim chip back.
wow it's got the signal back. But...do a call out- after 2 rings i't stop and "pls insert your simcard"
- try a gain : move out the sim chip- do a hard resert- insert the sim chip back. use another phone call to sx56 after 2 rings i't stop and "pls insert your simcard" again.
- Do nothing, my sx56 got signal again after 20minutes. And "pls insert your simcard" again if I try to call out or make call in it. :roll:
----------------------------------------------------------------------------
My question is:
- is it a hard ware problems ?
- if not , any one know how to fix it ? i have syn cable and sd card already.
My rom is: 4.01.12 - radio stack: 6.24.00
My provider is Mobifone: 900Mhz
sounds like an incompatible sim card
hi, thanks for fast comment.
it's not a wrong sim - it's work very good for along times.
I got 3 sim chip already with 3 provider in vietnam. All of them got problem with this sx56 too.
pls help.
up -
still need help
Related
After unlocking (read code) with xda2unlock and enter code in XDA2, the xda2 don't want to enter in network at all (radio say no service) also when i want a manual search of networks, phone come with an error. Any ideeas why? (phone ask pin no for sim card, but after entering no radio at all!)
florin_m said:
After unlocking (read code) with xda2unlock and enter code in XDA2, the xda2 don't want to enter in network at all (radio say no service) also when i want a manual search of networks, phone come with an error. Any ideeas why? (phone ask pin no for sim card, but after entering no radio at all!)
Click to expand...
Click to collapse
It could be a problem with the SIM unrelated to unlocking.
Does the SIM work in another phone? Does the SIM that came with the XDA2 still work? Have you tried another hard reset?
i tryed different SIM cards! the sim cards working fine! The original card not working anymore! I flashed the 1.6.0 in it now and the same radio stack seems not working fine! Can we rewrite the GSM settings again (maybe corupted)?
florin_m said:
i tryed different SIM cards! the sim cards working fine! The original card not working anymore! I flashed the 1.6.0 in it now and the same radio stack seems not working fine! Can we rewrite the GSM settings again (maybe corupted)?
Click to expand...
Click to collapse
So you also re-flashed it with a different ROM? I suspect that the problems are more related to this than due to the unlocking. The unlocking uses the official interface and no unorthodox methods are used to unlock it. I've had no reports from anyone that the phone did not work afterwards or even that the unlock code did not work. It is important to consider all aspects that could have influence else you might be hunting for the wrong solution.
Don't know what is realy rong with it. I locke it back (AT%HTCLOCK...) and now radio at least saying Searching (with same firmware). Do u have a full gsm backup (tunning as well?) maybe is something messed there.
I use ICQ or MSN or Yahoo messager can u please PM with ur details saw we can chat live?
Thank's
Try to change the band
HOW?
Radio does not work after unlock
Got the unlock code from Cingular. The code was accepted. Entered T-Mobile SIM but then phone will not make or receive calls. Even after putting original Cingular SIM it will not work.
Inserted another Cingular SIM and attempted call. It starts working. However, if I put T-Mobile SIM it would go back to same state.
Any help would be appreciated.
It is MDA 3 from Siemens for Cingular with Radio version 1.02.10
Hi!
I have CID unlocked my 3100 (already SIM unlocked) and I flashed WM 61 Pro V1g everything is working fine but the problem is it's working only, on the one SIM card I used while unlocking the phone. Any other card I put in (even cards from the same carrier) it gives me "SIM failure" so normaly I can't turn on the phone function. Can anybody help me at what could be the cause.
P.S.: I have tried flashing other ROMS but it's the same thing on every one.
I have tried to CID unlock the phone with another card in but it's the same.
Ex Cingular 3100 now WM 6.1 Standard
OS 5.2.19202 by pArtizAn
Radio 4.1.13.34_02.79.30
Hi! Again...
To clear something up I did tried a different Radio and now I can use 2 of 3 providers in Switzerland (Orange and Swissscom) but the 3rd one Sunrise (the one I am using) want work. I tried two sifferent Sim cards from that provider and they both gave me a Sim failure.
Could that have to do something with the voltage of the card or is it something else.
Please I need help, cause I realy want to use this phone but I can't just change providers because of the phone.
Help!!! Please.
colovic said:
it gives me "SIM failure" so normaly I can't turn on the phone function.
Click to expand...
Click to collapse
i had the same problem on Qtek 8500 with new Beeline SIM-cards. The problem was solved by changing that new SIM card to older.
Thanks for the answer but my SIM card is from 2003 so any older would not be an option. I just thought it had something to do with the radio or the ROM and maybe could be fixable but thank you anyway and keep up the good work, the WM6.1 Pro is great!!!!
P.S.:Kosovo was and will always be Serbia.
A friend of mine had one of those disposable phones & I took the sim out and put it into my unlocked 8500 to see what would happen. I got the same error, sim card failure so it might be that while your phone is unlocked, your carrier may have locked the sim. Just my .02 on that one.
Hello guys, Please i need some help with my X02T (TG01 from SoftBank).
I flash my phone with T01A ROM, using the "TG01 to T01A ROM Converter" and pin mode, now my phone have DOCOMO boot logo, and my SIM-Card from SoftBank dont work (ask for unlock code), soo i buy a Universal SIM Unlock (hypersim) and try use with ROM radio 5005.1700.05, and the phone work fine for 1 day.
Phone, internet and SMS work good, but in roaming mode, and after 1 day i lose the signal, and cant connect again, and when i try manual connection and choise SoftBank i get this Message: S.O.S / Emergency calls only.
Soo i put my SIM-Card (SoftBank) inside my old HTC Hermes, without Hypersim (my Hermes dont need it) and cant connect too, but when i change for manual and choise Vodafone JP (SoftBank) it work normal again, i can connect with phone, internet, sms, all.
I flash my X02T with another ROM, this time i choise radio 5005.1600.05, put my SIM-Card with Hypersim again and this work fine again but still in roaming mode, phone and internet work good, but can only send sms, can't receive, and after less 1 day signal dead again, and get the same error: S.O.S / Emergency calls only
Plz i need help with some questions:
1 - Why i can only connect in roaming mode, if i just use a SoftBank SIM for connect with SoftBank network?
2 - Why can only use the phone for 1 day?
3 - Since my Boot is DOCOMO, i can use a DOCOMO SIM without hypersim?
4 - If i buy a unlock code, my SIM-Card will work withou a Hypersim?
5 - If i flash ROM with another radio the phone will work again?
Thanks for help guys. All help is welcome
Please i forget 1 ask, if i buy a better Universal SIM Unlock (like Iphone unlock 2.2), this will fix my problem?
any one know if T01A need a Universal Sim Unlock after flash ENG ROM?
my phone works fine with any rom and there's no need of unlock code...
Hypersim simulates roaming, so you have roaming icon on status bar.
If you have problems with hypersim, get Nokia BB5 phone and turn it on with your simcard and hypersim then make call, receive sms, etc. Now it should work with tg01 too.
I make a new test with my japanse ROM radio 5005.1901.20 (SoftBank ROM with DOCOMO Bootloader) and works good now, used for 3 days and signal is good.
I think the radio is the problem, is possible get a ENG ROM and change radio for 5005.1901.20?
HI, eethecat would you be so kind as to share with us the japanse ROM radio 5005.1901.20 (SoftBank ROM with DOCOMO Bootloader), I bricked my x02t with flashing a chinese WM6.5 ROM. Now I can power the phone by shorting Pin 1 and 2, after that, I insert the softbank sim card, seems no sim card installed on the signal bar. Thank U in advance for your help.
lazy7811 said:
HI, eethecat would you be so kind as to share with us the japanse ROM radio 5005.1901.20 (SoftBank ROM with DOCOMO Bootloader), I bricked my x02t with flashing a chinese WM6.5 ROM. Now I can power the phone by shorting Pin 1 and 2, after that, I insert the softbank sim card, seems no sim card installed on the signal bar. Thank U in advance for your help.
Click to expand...
Click to collapse
My is the same, i need use a Hypersim for make phone work, but only for few hours...
eekthecat said:
My is the same, i need use a Hypersim for make phone work, but only for few hours...
Click to expand...
Click to collapse
hi,
wich one Hypersim you are use now ? how about i-Smart Hypersim ?
My one is NTT DOCOMO. But now i can flash Softbank Rom then use Softbank phone ? Please tell me how to do ? thank so much for your help !
Very best regards.
I got unlock code from Orange for the Orange HTC Mozart. It did accept the code and accepted the non-Orange SIM but showing no signal. I have tried with other non-Orange SIMs but still no service (no signal) but as soon as I put my orange sim back in, it worked fine for both 3G and 2G signals.
Does this mean that the code provided only did the SIM unlocking function but not the carrier unlocking bit. BTW, although orange mentioned in the instruction that phone will ask for code two times, but in my case it only asked once.
Orange seems to fail even to understand the problem. any tip / trick?
ZeeShh said:
I got unlock code from Orange for the Orange HTC Mozart. It did accept the code and accepted the non-Orange SIM but showing no signal. I have tried with other non-Orange SIMs but still no service (no signal) but as soon as I put my orange sim back in, it worked fine for both 3G and 2G signals.
Does this mean that the code provided only did the SIM unlocking function but not the carrier unlocking bit. BTW, although orange mentioned in the instruction that phone will ask for code two times, but in my case it only asked once.
Orange seems to fail even to understand the problem. any tip / trick?
Click to expand...
Click to collapse
Hi,
You can tell them to give you a new one cause is needed for abroad use, they have to
Probably the code was not a proper one
Regards, ansar
thanks Ansar, I reset to factory setting twice and it now all working, with any carrier SIM and for 2G/3G. I think some thing was just stuck after accepting the code. but any way it's working now
thanks.
ZeeShh said:
thanks Ansar, I reset to factory setting twice and it now all working, with any carrier SIM and for 2G/3G. I think some thing was just stuck after accepting the code. but any way it's working now
thanks.
Click to expand...
Click to collapse
Hi,
Glad you fix it!
Regards, ansar
hi
i have same problem but still cant fix it
i have trophy from vodafone i buy code and enter mobile show code accpeted oki
but now now signal in any sim in our countery(egypt)
with orignal sim phone have network normal
i make hard reset and flash orignal rom but phone still no service
thk
vodafone_banha said:
hi
i have same problem but still cant fix it
i have trophy from vodafone i buy code and enter mobile show code accpeted oki
but now now signal in any sim in our countery(egypt)
with orignal sim phone have network normal
i make hard reset and flash orignal rom but phone still no service
thk
Click to expand...
Click to collapse
Hi,
You must post to Trophy forum
Regards, ansar
Anyone tried running connection setup to get correct settings for the new sim?
Hello, I have a problem that I do not know how to solve, I changed my IMEI because I had a generic and it was reported, I have a new, clean, recently installed, but I can not make it read the sim, just say INSERT SIM - EMERGENCY CALL ONLY, who can Help me plz, thx !!!