http://www.pdamods.com/proddetail.asp?prod=KJAMPRBL
any one have this case?
it looks good and you can possibly use the keyboard while still in the case.
R
No, I don't but...
I would suggest that you could not use the keyboard whilst in the case as it would not slide out easily, I have got myself one of the PDAir cases which are the only ones that I have found so far that allow you to use the keyboard whist still in the case, there are 2 types to the best of my knowledge, one is a flip type "Leather Case for XDA Mini Pro/XDA Mini S/MDA IV/imate K-Jam/Qtek 9100/HTC Wizard/Orange SPV M6000 - Flip Type (Black)" and the other is a book type " Leather Case for XDA Mini Pro/XDA Mini S/MDA IV/imate K-Jam/Qtek 9100/HTC Wizard/Orange SPV M6000 - Book Type (Black)" they can both be found on the PDAir Website http://www.pdair.com/welcome.php
As a sidenote I have a unopened flip case that my wife bought me, so if you want a bargain then you can have it for a tenner & postage costs.
Case which allows keyboard use and cradle dock
Looking for a case that i can keep on the fone even when it is docked in the cradle.
can i do that with the case you have mentioned.
Jass
Here's one that can be used with a cradle. Can't use the keyboard with it on, though.
http://www.thepocketsolution.com/Me...egory_Code=mda_iv_accessories&Product_Count=8
double post.
Related
Hi ive just moved from the TREO600 to an O2 xda mini s and i hate the belt clip case that comes with it , anyone know of a simple slip case (like the treo) that works with the xda/kjam/dopod 838/mda vario ive done some googleing but cant find anything
thanks
Matt
www.tuff-as-nuts.com
Good cases, no complaints, configurable too.
Cheerio
Howard
Nice one they look perfect , though the case that fits my device has been suspended
I use a Magician Case, (I-Mate JAM) I used to have the Magician and this case was very good for it, the mini-s fits snuggly in it now and it has stretched a little over the course of the year I've had it.
Cheerio
Howard
ok here are some suggestions while you look for your perfect slip case... by the way are you looking for a horizontal one or vertical one?
--
ipod mini sock [it stretches... used this the first few days I had my wizard]
one of those oakley shades cases cum wipes [dual function there]
--
I think most SE P800 or P900 cases would fit the mini S [well actually from comparison shots it even looks like Treo cases would fit as well]
--
currently I am using a aluminium case for my wizard.
Hi ive tried the treo and an ipod case they are both a quite tight, i could attempt a stretch but id prefer a solution that doesnt need modding Oh and im looking for a verticle slipcase just like the Treo's no belt loop etc justa simple case.
Krusell
The Krusell Cabriolet ought to be perfect from what you're describing. It does come with a belt clip functionality but since it's Krusell you can replace this with any one of a number of options or simply remove it altogether.
There's a post over at PDANut listing all the case options.
i know its a little late, but im looking for a slip case as well and came up with this
Slip case
Timbuk2 Smartphone case. Fit perfectly
http://www.timbuk2.com/tb2/retail/catalog.htm?categoryId=47
I got mine from Palm store
http://web.palm.com/products/Category.jhtml?id=180042&cat=b100016
Go to boxwave.com and make a request. They claim that if they get enough requests they release the product. Go to the link at the bottom to request a product for a device and then make sure "Flexiskin" is checked. It is probably a good idea to mention all the Wizard's aliases (MDA Vario, Qtek 9100, I-mate K-jam) so they see it is a device in alot of user's hands. I owned one of these for my Treo and it was outstanding.
Just an FYI to everyone:
I got my Krusell Verticalic Case today and it works GREAT for the 8125. You need to order the small-wide size (Model 94178). The websites don't list it as compatible, but if you pull out your ruler and measure your phone (believe it or not Cingular has the width wrong) you will see that it is a perfect fit for this case. I have a spring clip to wear with my jeans and a swivel clip to wear with my nicer work clothes.
I am psyched! I had been waiting for this thing to come in, as I was convinced it would fit despite it not being listed as compatible.
Also-if anyone is looking for a good place to get one of these...I can recommend sfplanet.com. I ordered mine from them on Sunday and I got it today (MN to SC). They also did a great job with some special instructions I left in the comments box.
Two thumbs up for the Krusell case and two thumbs up for SFPlanet.com!!!
http://www.krusell.se/productUni.ph...=616&category=4
http://www.sfplanet.com/index.cfm/f...atid/0/id/59211
SuperDodge said:
Just an FYI to everyone:
I got my Krusell Verticalic Case today and it works GREAT for the 8125. You need to order the small-wide size (Model 94178). The websites don't list it as compatible, but if you pull out your ruler and measure your phone (believe it or not Cingular has the width wrong) you will see that it is a perfect fit for this case. I have a spring clip to wear with my jeans and a swivel clip to wear with my nicer work clothes.
I am psyched! I had been waiting for this thing to come in, as I was convinced it would fit despite it not being listed as compatible.
Also-if anyone is looking for a good place to get one of these...I can recommend sfplanet.com. I ordered mine from them on Sunday and I got it today (MN to SC). They also did a great job with some special instructions I left in the comments box.
Two thumbs up for the Krusell case and two thumbs up for SFPlanet.com!!!
http://www.krusell.se/productUni.ph...=616&category=4
http://www.sfplanet.com/index.cfm/f...atid/0/id/59211
Click to expand...
Click to collapse
Your links are broken.
I was going to buy this Piel Frama case for my Rhodium, but I can't really see from the pictures whether I have access to the mini-USB or not. Anyone who can enlighten me? Can I use my headset while using this case?
Of course, I could upgrade to this wonderful case, but it is more expensive ordering from Spain, and it does look a lot more bulky than the classic model. EDIT: Ordering from Norway, it's around 400 NOK for the Classic case from the US vs close to 700 NOK for the iMagnum one from Spain.
Alternatively I have been looking at this PDair case which is a good deal cheaper, but I haven't found any reports on its durability and general usefulness yet. Did anyone here try it out? If so, is it any good?
While searching for the others I also found an aluminum exoskeleton of sorts and it does look cool I think. It doesn't add too much size and weight to the TP2, so it might be a contender as well. Again I ask for opinions
Hy
when i bought my TP2 i got a case very similar to the second one you post (this wanderful case)
i never used it.
it makes the Ppc huge. extremely unconfortable.
at the moment i am using a case which was designed for iphone or something like that.
it has a clip for the belt and a hook that goes on the jeans. it's basically like one of that sock but a bit better.
it's much slimmer, easy to access, secure and when i use the phone i don't have the case attached.
my suggestion is not to buy that cases, but go into some shop and try some up
ciao
fabrizio
mhurg said:
I was going to buy this Piel Frama case for my Rhodium, but I can't really see from the pictures whether I have access to the mini-USB or not. Anyone who can enlighten me? Can I use my headset while using this case?
Of course, I could upgrade to this wonderful case, but it is more expensive ordering from Spain, and it does look a lot more bulky than the classic model. EDIT: Ordering from Norway, it's around 400 NOK for the Classic case from the US vs close to 700 NOK for the iMagnum one from Spain.
Alternatively I have been looking at this PDair case which is a good deal cheaper, but I haven't found any reports on its durability and general usefulness yet. Did anyone here try it out? If so, is it any good?
While searching for the others I also found an aluminum exoskeleton of sorts and it does look cool I think. It doesn't add too much size and weight to the TP2, so it might be a contender as well. Again I ask for opinions
Click to expand...
Click to collapse
That aluminum case looks like the tp2 would slide around in there. I've tried a few cases, but they all added too much bulk. Did find a cheap clear plastic one, and it's awesome. Looks great, fits better than any other ones, and adds hardly any bulk. CHeck this thread out.
http://forum.xda-developers.com/showthread.php?t=578050&highlight=clear+hard+case
This is what I have. It does add bulk to the phone but has saved my phone twice already.
http://www.amazon.com/Body-Glove-Elements-Rubberized-Tmobile/dp/B002JQRW68
Comes in 2 configurations, 1 for belt clip and other for pocket. You cannot have both as there is a notch at the back which is interchangeable depending on how you want to use the case.
* Another thing, I believe this case was designed more for the Touch Pro 2 for t-mobile as I don't have issues like the other reviewers had.
Tmob Version TP2 seems to be an Orphan amoung case makers
I am in the same boat trying to find a nice case that my phone does not have to be removed from to be used. In the past I went with Krusell cases and that was great for many years and different devices now the Krusell for the TP2 is known to be junk.
I would buy Piel Frama magnum from your post If I had the Reg Ver Tp2.
http://www.pielframa.com/htc-touch-pro-ii-imagnum-cases.htm
Unfortunately I have the USA T-mobile Version of the TP2 and this phone is turning out to be the bastard orphan amoung case makers.
I have narrowed it down to two cases and would like any opinions for my Tmob TP2
Proporta Aluminium Lined Leather Case (HTC Touch Pro 2) Model 30263
http://www.proporta.com/F02/PPF02P05.php?t_id=4871&t_mode=des
Noreve HTC Touch Pro2 Tradition leather case Model 21526 (Not sure if this will work with my Tmob version It says "Not for T-Mobile MDA Vario version" I have never heard to TP2 called MDA Vario
http://www.noreveusa.com/brand/HTC/product/HTC_Touch_Pro2_Tradition_leather_case.html
a small rant.........
With so many versions of the same model phone the waters are becoming murky. I wish they would just give them different Model Numbers and Names.
Thanks and Best of Luck with the search for the best case for our phones.
JK Minoch
Just got my Touch pro2, with a htc pouch and htc case.
Case is fine, but I dislike to have to open it to get the phone out. Also, I can't use the usb while in the case, another deal breaker.
The pouch is better, but would like more protection.
What I found perfect is the slide case I got with my Touch pro. Sure one can get better protection, but considering how fast was to use the case and how small the case is, the phone looks like new without any scratches.
Any recommendations for such a case?
Last night i purchased ...
...the clear acrylic case from the AT&T store. It is a 2 piece case that snaps on AND has a touch sensitive screen protector. I do not like the plastic belt clips as I have bumped/snagged them on things and broken the clip. I prefer a holster type case (horizontal) as i carry another object directly on my side/hip.
I just wanted to say that I bought the sand colored KRUSELL KALIX MOBILE CASE for my Xperia Mini Pro and it works great, looks great too!
At first it was a very tight fit but after stretching the leather some it isn't a problem anymore, fits like a glove but is still quite easy to remove from the case.
Holster
I've bought a couple of small mobile cases from Auto Zone that I thought were perfect for my x10 minipro. They have a front pocket for the phone with a velcro flap to hold it in and a small zipper pocket behind which I carry the headset and a spare battery. It's a perfect fit for the phone.
The only problem I have with the case is that it is very cheaply made and eventually the swivel for the belt clip wears out (which is why I've bought a couple of them). I'd love to find a similar case (but better built), but I haven't had any luck finding one.
I posted here because I ordered the new minipro last weekend, hopefully it will be here tomorrow or Friday.
dave
Where did you get the case for Xperia Mini Pro. All the cases I find are for Xperia 10 Mini/pro - the previous version of the phone
I can confirm the quality of the Krusell case, as i have bought a leather one for my big X10 and willing to buy a similar for my xperia mini pro.
Just trying to find the right one...
@OP Can you send a link to where you bought this case, I can't seem to find it with my Googleskills
Sent from my Xperia Mini Pro using the Internet
I use photo camera case "Hama HardCase Carbon Style 60H Black" Its made of durable materials - ethylene vinyl acetate (EVA) for high protection, internal dimensions: 6.5 x 3 x 10.5 cm.
Very cool
I'm currently using my old cheap case bought for my x10 mini pro, but shopping around for a cigarette case. It's about the same size as a pack of smokes and I could stow the headset in the lighter pocket.
Sent from my SK17a using xda premium
can you guys post some pics of your leather cases for the mini pro?
I just use a Golla pouch rather than a leather case... I prefer skulls..
If you do an image search for "Golla Smart Bag - TOMB" .. It Has a section for your headest or a spare battery or stuff to smoke or .. well whatever...
found this on amazon
http://www.amazon.com/gp/product/B0...&pf_rd_t=101&pf_rd_p=470938811&pf_rd_i=507846
MrSalue said:
found this on amazon
http://www.amazon.com/gp/product/B0...&pf_rd_t=101&pf_rd_p=470938811&pf_rd_i=507846
Click to expand...
Click to collapse
That looks identical to the one I bought - though I got mine from ebay (many traders sell the same thing on both Amazon and ebay in the UK).
It's fine - dirt cheap but doesn't look at all bad. It holds the phone reasonably well - not 100% clamped into place but it's not going to fall out. The cutaways are well placed - no problems with the speaker or camera and all buttons accessible. It doesn't affect the sliding action - it just grips the keyboard section and you slide the screen out when you want to type. It's firm but slim - no real padding - but it doesn't add too much bulk to the phone.
Minor niggle - the flap over the top covers the USB port so you have to have the case "unlocked" to use that. On the upside - it leaves the headphone socket clear.
Given the material it's made off, I suspect it won't last for very long before the "leather" cracks along the creases but for the money - it's still good value.
is there anything like a rather basic kind of leather protection (or similar) I can simply put my phone in and which also has a window to see the touchscreen (in order to see the time without having to get it out of the cover)? not talking about hard cases here.
anyones come from indonesia???
where i can get laether case for my xperia mini pro?? so Confusing
iflook said:
anyones come from indonesia???
where i can get laether case for my xperia mini pro?? so Confusing
Click to expand...
Click to collapse
buy it online and since ur in indonesia why dont you order from Ebay india they have alot of covers on that site
Nice
Sent from my xperia mini pro, thanks to Free xperia team!!!
Hi everyone,
I have tried the Krusell Tingstad case for the Xperia Mini Pro and I found it very good! (until I lost it )
It is good quality and very practical.
I added photos too...
Hope this helps,
MustangEmile
I have been looking for a new case for my Sony Tablet S, and I have seen a few people with the ZaggFolio, It’s a case, Bluetooth keyboard and stand all in one but made for the IPAD2.
http://www.zagg.com/accessories/zaggfolio-ipad-2-keyboard-case
I did some searching and was able to then find the Kensington folio for universal 10 inch tablets. I went into best buy sadly the top part of the Sony tablet S is too thick for the holders and this case does not work either.
http://www.kensington.com/kensingto...niversal-bt-keyboard-case-for-10-tablets.aspx
Does anyone know any cases like this for the Sony tablet, Or know of a good combination of a Case and keyboard? (I don’t want to have to take my cradle every place I go and I would love a case that holds everything and is still easy to carry in my hand)
Here an Amazon.com link
Hi,
I bought a Moko case (really nice, only gripe it blocks the IR signals, so have t take case off when using the remote feature).
Here's a link with some other accessories you may like:
http://www.amazon.com/s/ref=nb_sb_s...+tablet+s+accessories&sprefix=sony+ta,aps,188
smakcc said:
Hi,
I bought a Moko case (really nice, only gripe it blocks the IR signals, so have t take case off when using the remote feature).
Here's a link with some other accessories you may like:
http://www.amazon.com/s/ref=nb_sb_s...+tablet+s+accessories&sprefix=sony+ta,aps,188
Click to expand...
Click to collapse
I didn't like that case and returned it to Amazon, I felt where the sides and top come together the stitching made it stick out too much.
smakcc said:
Hi,
I bought a Moko case (really nice, only gripe it blocks the IR signals, so have t take case off when using the remote feature).
Here's a link with some other accessories you may like:
http://www.amazon.com/s/ref=nb_sb_s...+tablet+s+accessories&sprefix=sony+ta,aps,188
Click to expand...
Click to collapse
It looks like rooCASE Executive Portfolio (Black) Leather Case Cover might do what I need, but I don't know it it would fit a Bluetooth keyboard inside. Really want I want is a case to hold my Tablet and a keyboard (I found a keyboard that is about the size of a cell phone I could use) as well put my tablet on an angle.
Also looking for a case
Hey there,
I am very interested in finding a keyboard case, so I can use it to take notes at school.
My searching has got me nowhere but sad:
http://www.squidoo.com/best-cases-for-sony-tablet-s#module155742916
and
http://www.youtube.com/watch?v=G2I0JKZ6UCw
But nowhere to buy the product from.
Am not using the keyboard very often and find the keyboard adds to the weight to carry around. Am looking for a case the would stay on even when attaching the keyboard book cover?
I cant imagine any case that will allow you to snap on the keyboard book cover while it's installed. Maybe a skin??
I did not buy the keyboard cover for just that reason. What I did is get the Book Cover case and a separate bluetooth keyboard. While I would prefer the pogo connected keyboard like on my Galaxy Book, I use the tablet as a tablet 90% of the time so I didn't want all that bulk. I purchased this keyboard for under $30 and I'm happy with it. I bought the one with the case because I just throw it in my backpack. When I use the keyboard I just remove it completely from its case {magnetically attached) and use the Bookcover Case to stand up the Tab S4.
Thanks, suspected as much. Will consider your solution