Hi, when I am trying upgrade my hymalaya it stops at erasing radio 100% and then says radio upgrade error, himalaya can boot but only NO GSM... phone is not working, please help me what cat I do...
cus, zkousel si tam flashnout jiny RADIO??
I can flash any version, but all makes the same error I cant change bootloader, it says not allowed... i dont know what .....
Related
I try a lot of things, but, ....still no gsm
details:
first, all instalation (os, ext , radio) finished succesfull, but after reset I don't have any phone...
I try again, and the installer stop at radio (installing only the os and ext.)with message : press reset +power+directional... ant try again.... I try again but still same message apear
If anybody can help me please, reply!!!
try the other thing, the one you haven't tried.
A bit hard to help with so little detail.
Which OS,Radio original ?
Which OS version? which Radio version?
how do you mean "no GSM"? no signal? no phoneProgram?
what have you tried?
no gsm at booting
no radio, protocol and imei in device information
I make a BIG mistake, I dont make a beckup
original:; Os : 1.72, Radio version 1.16 (I think)
Now : os 2.06.00 wwe , Radio no specs.
I have the phone program , but I can't communicate to SIM (no aplication installed, if i try to run Sim toolkit),
antena icon with "!" say "No service"
when I press the phine button, the program start but with large delay.
have you double check your language and operator for nk.nbf; ms_.nbf; and radio_.nbf with xda2nbftool.exe???
Resurrect
Flash it with the launch ROM.
I just update..... don't make any verification and now i'm very sad...
[Krueger]Dr.Stein - I don't understend!
Huh?
othgor said:
I just update..... don't make any verification and now i'm very sad...
[Krueger]Dr.Stein - I don't understend!
Click to expand...
Click to collapse
What did you do?
I think he only did the upgrade with a nk.nbf and ms_.nbf.
Frpm the messages I think he means the device says it doenst have the GSM functionality operational. Typically the result of upgrading without Radio.nbf
Get a good (1.17 / 1.18) Radio.nbf (set operator!!!) & try again
i have same problem where is launch version
ok i got xda2 02 launch rom
which unable to communicate
while xda2s can upgarde my rom but error 114 no gsm
i also got launch rom but it cant communicates
I have same issue.
HI
I AM IN NOW BIG TROUBLE
I HAVE O2 WITH SPLASH ON SCREEN AND HANGS THERE
all i done is upgarde downgrade from version 1.600 /1.66/1.72
all giving same errors
error 114 while erasing radio rom
this is RUUL LOG
9:54:14 Write block133
09:54:19 Update Stage 3 complete
09:54:34 Begin Stage 4
09:55:04 Radio Erase retry 1
09:55:34 Radio Erase retry 2
09:56:04 Radio Erase retry 3
`
THEN ERROR
NEED GUIDANCE
its a nogsm on screen
No GSM
1.72 wwe
thanks
no one has problem before ?
how to do with mmc card
why lauch vwrsion does not communicate with xdaII
i got Xda_II_LaunchROM_v10311
alos Xda_II_Upgrade_v16050
but this two cant communicate
also i put himupgradeUT in same folder but it gives error bed chacksum
i am becoming crazy now
OK.. can u tell me what version you have now? and what version are you trying to upgrade.. lets make this step by step.. i will try my best..
srtange
i had put my phone on charger after two hours
windows start up scrren appeared
also if i allow to reset phone hangs on O2 screen
its work ok now but without gsm
this is information
i got O2 XDAII
ROM VERSION 1.72.00WWE
ROM DATE 03/15/04
RADIO VERSION NOT AVIALABLE
PROTOCOL VERSION NOT AVIABLE
ExTROM VERSION 1.72.181
IDENTITY
Model No. PH10B
Platform: pocket pc
imei: not aviable
i cant flash radio part
my boot loader is 1.03
thanks and regards
Oh My God i dont know how to upgrade the bootloader... i think the problem is your bootloader cuz its not updated.. it sgould be 1.06 and all of that will work fine.. i dont know how to upgrade the bootloeader...
can anyone explain "update error 262". Im am trying to upgrade my radio rom only. I get this error weather im in bootloader 1.04 and even tried 1.01mfg with no luck. the device is super cid.
i have tried wiki and search with no help......
mal..
malrose said:
can anyone explain "update error 262". Im am trying to upgrade my radio rom only. I get this error weather im in bootloader 1.04 and even tried 1.01mfg with no luck. the device is super cid.
i have tried wiki and search with no help......
mal..
Click to expand...
Click to collapse
you're supposed to get the error; it reaches 99% then it quits with an error, but you just ignore it and go ahead and soft-reset.
also, use 1.04, don't use 1.01
thanx for the respone, but it does not even get to 0 percent. it opens boot loader then the
error comes up.
mal..
Ok heres what I need help with
I have Black Satin (WM6)
I decided to update the Radio
I ran it and it stuck at 0%
then I ran the SIM and CID unlocker by pof (funny thing is that it downgraded the bootloader from 2.10.oli even though it stuck at 0% aswell)
Now I have:
IPL-1.01
SPL-1.40.Olipro
SuperCID and SIM unlocked
"No GSM" displayed on boot
My IMEI is blank in Device Information
How do I get my radio back,
Thanks in advance
I will try this
I'm going to try the thing from the Wiki to fix the "no GSM" problem.
Then I will try to flash the radio again.
Ill let you know what happens
Do i need to do that erase thing that fixes the "No GSM" from the Wiki everytime I want to update the radio? If I had done that the first time I wanted to upgrade the radio, it would of worked?
hi guys,
trying to upgrade the radio rom, im using the customRUU and its getting to about 99% and then its getting the error 290: invalid command.
and now it only boots in the red, green, blue and white bootload screen.
heres some info if it helps:
SPL-1.42.HSPL on my hd2..
windows 7 home premium, (i tried running as admin, no difference.. also tried several other usb ports)
help would be appreciated!
thanks guys!
have you tried a good ol MTTY or Task29 before flashing?
does the phone boot to RGD screen?
what Radio you using?
And you have the phone HSPL unlocked?
dodgy download perhaps? tried another radio?
did anyone find the solution to this problem??
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
webiso said:
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
Click to expand...
Click to collapse
What exact ROM versions have you tried, and what SPL or HSPL do you have showing in bootloader? Also is there a radio currently on your HD2 and what is that radio if so?
normally phone hd2 leo and italy not t mobile ant spl 208 hardspl maked bootmode okay ( also write boot with jtag ) radio ver 2.15.50.14
webiso said:
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
Click to expand...
Click to collapse
I had the same problem. I was trying to restore my phone to original firmware, due to issues with custom firmwares. I had managed to extract the NBH from the installer provided by my carrier, and used CustomRUU to flash the phone, but the phone was not booting.
I then flashed one of the EnergyROM builds onto my phone.
After that I could not get the original firmware onto the phone, error 290 at 9%.
I booted my phone into the bootloader (red/blue/green), and used HSPL2 to set SPL to 1.42.HSPL. I could then flash the original firmware.
My phone is now working fine, as best I can tell.
Always showing bootloader screen with rom upgrade error
I was trying to revert to windows custom rom from android (due to frequent freezing) and then onwards booting the phone I am always getting the bootloader screen displaying rom upgrade error.
I tried hard reset but still the same problem persists, then I downgraded the HSPL 2.08 to SPL-1.42.HSPL and then tried reinstalling the custom rom but still the same problem persists. In between after downgrading the HSPL, I tried task 29, it was unsuccessful after 96% (shows Invalid Command (Error 290)), while reinstalling the customRUU I have, I got something like error 270 at the end (it goes fine till 100%).
I also tried with installing the radio (ver 2.15.50.14) in between but to no effect
Please help me in fixing the issue, my phone is of no use now