Related
good morning to everybody...
i have an xda I
my akku went off during my holiday. now i recharged it an the wallaby bootloader v5.22
starts an nothing else doesn´t start.... can anybody tell me how to start the windows mobile software?
thx 4 help
s3V3n said:
good morning to everybody...
i have an xda I
my akku went off during my holiday. now i recharged it an the wallaby bootloader v5.22
starts an nothing else doesn´t start.... can anybody tell me how to start the windows mobile software?
thx 4 help
Click to expand...
Click to collapse
Have you tried a hard reset?
Are you sure, you do not have an hardware problem? Normaly you enter the bootloader by pressing power button and making a soft reset. Maybe this switch is blockated by anything....
HTH
Stefan
yes i don´t think its a hardware problem because nobody touched it during the week of my holiday but i´ll go to the shop tomorrow looking they will say
oh and yes i did a few hard and soft resets... no effect... he only doesnt boot windows the bootloader starts but there i can only do selftests
please can any one tell me how to fromat Qtek 1010?? thanks in advance
XDA won't start
Dear forum users,
I own a XDA I, which is sold as PCT 206 in Turkey. The original OS is ppc 2002
I also have the same problem on my XDA 1. I used up the battery to the end and after plugging the charger I got the bootloader screen.
At that time a had a cooked rom ppc 2003.
I tried to flash from SD to the original ppc 2002 but I still get the bootloader after soft and/or hard resetting.
Does somebody have an idea.
Best regards.
Sounds like the power switch may be stuck if you are entering bootloader from soft reset.
same trouble
cruisin-thru said:
Sounds like the power switch may be stuck if you are entering bootloader from soft reset.
Click to expand...
Click to collapse
i have same problem, after i upgrade from SD card and after i gave a cold boot machine start with TMOBILE logo and: 4.0.1.16, R6.25.02, G324e4...
by the way... i have no more access to setup options at start... any idea about how to fix this?
Is there a way to access to RAM using IR or USB without init windows CE thanks a lot
lambertoh, you have a different problem, you need to reflash your phone using sd card method again, it might be helpful to try a different memory card.
cruisin-thru said:
lambertoh, you have a different problem, you need to reflash your phone using sd card method again, it might be helpful to try a different memory card.
Click to expand...
Click to collapse
thanks for your response, i did it fix unsuccesfully. I have no access to test menu (before i had in fact but i kill it ). Can you tell me how can i write the bootloader into the wallaby, maybe with a jtag, or maybe with a byteblaster cable, i don't know too much in thius kind of themes but i have to... Actually i'm trying building a serial cable and i pretend use tty application to try to use an terminal pda in the computer.
Excuse for the english, is not my native language.
any solution
;740211 said:
oh and yes i did a few hard and soft resets... no effect... he only doesnt boot windows the bootloader starts but there i can only do selftests
Click to expand...
Click to collapse
i am having this same problem ... i have a T-Mobile and it is stuck on Ozone screen i can run the bootloader but it allows only tests...
can anyone tell me a solution ?
if a valid rom is put on the sd card the right way entering bootloader auto update the rom
After I tried to downgrade my Qtec2020 from WM2005 tot WM2003SE the updated stoped in stage 1.
This is what I found in the RUULog.log file:
19:15:11 Connection with Serial
19:16:31 Begin stage 1
19:17:01 CE Erase retry 1
19:17:31 CE Erase retry 2
19:18:01 CE Erase retry 3
Now I am stucked in bootloader mode and tried softreset, hardreset, special WM2005 hardreset but nothing seems to work. I have only a grey screen with Serial v1.02 on it.
Is there anybody who could help me
I've never performed any downgrades from WM5.0 but I have an idea that could work?
Install WM5.0 again, then perform a Hardreset but this time perform the Registry and Storage format (press power+record+camera+reset pin for about 5 seconds and you should see a menu on the screen, by using the record button to select an option and camera button to change to YES. It should be NO, YES, YES and press ACTION button to save changes). Then unhide the Extended ROM and erase anything in there.
Then perform the downgrade to WM2003SE.
I hope this works for you...
Regards,
Rayan
Thanks for the information but it's not the solution.
I tried to install WM5 again but I get an error 112 during the install.
The RUULog.log file:
20:42:03 Connection with Serial
20:43:26 Begin stage 1
20:43:56 CE Erase retry 1
20:44:26 CE Erase retry 2
20:44:56 CE Erase retry 3
The device is still stuck in bootloader mode. All the reset actions won't work (soft, hard, special)
Have you tried the upgrade/downgrade method using an SD card instead of the cradle/pc?
No I only tried it by USB/PC. I will search the forum for how to do this and give it a try. I will let you know later if this is the solution. Thanks for the information so far.
Regards Marco
I search the forum but can't find any way to do this. Can someone tell me how to flash by SD card
It's in the Wiki, not the forums...
Here you go:
http://wiki.xda-developers.com/index.php?pagename=XDAtools
Good Luck!
Hi, I was just upgading my XDA 2 os when my laptop froze in the middle of the upgrade! Now it only has the o2 startup screeen it won' turn off or connect to my computer to complete the upgrade. What can I do?
Is my Xda gone for good??
skud try aggain
you can put it back in bootloader mode and try aggain
this time on a destop you know power problem in laptop
you will not want a power failure in the middle of an upgrade
hope thats helped
Stuck on Bootloader
I experienced the same thing too.
Just detached battery from your device for about 10 minutes (I pressumed, may need more time)... then do the downgrade again.
in your PC task manager ''end process'' the ff:
''wcescomm.exe''
''WCESMgr.exe''
''rapimgr.exe''
now connect again the device and start the reflash...it works for me.
hope this wl help you...
No joy I'm afraid. How can I get it back in bootloader mode when I can't get past the O2 startup screen. Putting in an sd card Doesn't do anything either it is completely dead except for the annoiying but colorful O2 Logo.
Ok, it just turned itself off so I am after turning it back on andnow all I have is a white screen! What is going on? The laptop crashed when it was at 65% in the upgrade proces.
I'll give this taskmanager thing a go and get back to ya.
Thanks for all the help btw!
I have placed a ROM.nb1 on my SD card, but I get a eror with the XDA OS Image Tool. It looks that I can't find any way to get out of the bootloader mode whatever reset I tried. The battery was out for almost 12 hours but this also makes no difference. Is there a other way to flash by SD card or is there a way to reset/upgrade the bootloader mode. I think the bootloader mode hangs or is corrupt.
Regards Marco
I've tried that now and it still won't connect and still the same white screen! Any othere suggestions? Is there anything I can download which would force a connection or install something onto my XDA or does anyone know how I can get past this blank screen and maybe get to the settings window?
This must have happened other people anyone managed to fix this?
:!: :!:
hey power kite! It seems we got similar problems but your a bit ahead in getting it fixed. Can you tell me where you got the Rom.nb1 file so I can give this XDA tool thing a go?
What kinda power kite you got BTW?
Here is the link where I get the NB1 file
http://forum.xda-developers.com/viewtopic.php?t=8606&highlight=sd+rom
Good luck
Cheers Power kite,
I was just doing a bit of seaching on the sd flash method and found a website that takes you throught it step by step if your interested
http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=93&PN=1
Hurray I'm back in business!!! Talk about relief! :lol: Its upgrading as we speak!
Now just to watch it like a hawk and not let this crappy laptop crash again!
Thanks everyone!
Give that link a look Power kite.
Skud
99% !!!!!!!
Great that it worked for you.
I did procedure 1, 2 and 3 but I'm still stuck in bootloader mode. Every upgrade WM2005, WM2003SE wich I have flashed before give me an error 112. I have flashed my SD card but I don't get any instructions on my screen.
Is it possible to install the bootloader again or upgrade it. I think my problem is the bootloader.
JusT Bought another atom.used.Tried flashing 6.1 atom's latest rom.By following the flash procedure.After the flash complete.i pull out the usb cable.wanna configure the sylus,but the screen don't respond.(Hang)so i tried hardreset.It stays at the black screen & me waited for nearly an hour.So i take it out the battery.(The battery i've just bought previously for the white atom) It automatically goes to bOOtloader without me pressing anything.So i flash the atoms original rom.it stays to 1% & my atom screen is blank.me Waited for 20mins.So i pull out the usb,take it out the battery & wait about a minute.Reinsert back the battery.Goes the same,enter bootloader without me pressing anything.I've been trying many times.I'm really stressed out..Could anyone help me settle out this problem.Sorry me causing everybody alot of problems.Thanks reply. Thanks in advance.Really appreciate your help.
Hm... it seems like the OS of device was destroyed, you said that you tried flashing your device to original rom, did you use RUU to flash it? It involved USB cable so I think you use RUU to flash it, did you try using your mini SD card to flash it back? If not, try using your mini SD card (less than 1GB)
I'm sorry, I forgot to post the link, here is the link showing how to flash your device using Mini SD card http://wiki.xda-developers.com/index.php?pagename=ATOM_SDCARD
Good luck man
I've tried your ways,nothing change.Is still the same.Is there any other ways.I'm really confused.Pls help me settle this problem.Thanks in advance..
jingaro said:
I've tried your ways,nothing change.Is still the same.Is there any other ways.I'm really confused.Pls help me settle this problem.Thanks in advance..
Click to expand...
Click to collapse
You tried flashing your device with mini SD? What were the screen showed up? Can you tell me a bit more? It's still the same? Was the file diskimg.nb0 loaded? Flashing your device by mini SD card will exclude the problem of USB cable or USB ports. Remember to charge your battery to at least 60% before flashing by mini SD card. That's the most I can help. If it was still the same as flashing by USB cable, then there's no other way but bringing it to your distributer for maintainance, I'm sorry, can't help you much
i've tried for 3 days.StiLL the same insert the battery,it will automatically goes to bootloader without pressing any button.When i tried the sd flashing with my 512mb.Nothing different.it stay at the bootloader.What can i do with this phone?anybody can help me to settle this problem.Anything i can do to make this phone work.Not to send to service centre.I appreciate yr help RONALDO.Thanks.
NoboDy Wanna Help me sOlved My ProBlemS ?
jingaro said:
i've tried for 3 days.StiLL the same insert the battery,it will automatically goes to bootloader without pressing any button.When i tried the sd flashing with my 512mb.Nothing different.it stay at the bootloader.What can i do with this phone?anybody can help me to settle this problem.Anything i can do to make this phone work.Not to send to service centre.I appreciate yr help RONALDO.Thanks.
Click to expand...
Click to collapse
If you have a spare camera take pictures of the screen you are getting and post it here.
the only problem is that i'm stuck at bootloader.Everytime i pull out my battery & reinsert back.it automatically goes to bootloader without me pressing any button.Next when i flashing the rom,it will surely stuck at 1%.So is there any masters can help me out this problem.Or maybe anyone had faced the same problem as i do?Pls help me solved this problem.i appreciate yr help.Thanks.
Anbody had any ideas?
Nobody wanna help me?
Until now nobody can help me .?reply
until now my phone is lying in the box. nobody can save.
HELP PLEASE !!!!!!!!!!!!!
I was trying to relock my mogule for the TEP and I was going to put the HTC sprint Rom back on. At the end of the Titan Relocker.exe process I was left with a Red, Green, Blue, and White screen that I can not get off. I have done a reset, Hard reset,bootloader reset nothing works it keeps coming back to the rainbow screen with writing on it that says: RUUNBH (upper right corner) TITA100 SPL-1.06.0000 CPLD-9. What can I do to fix?
You need to flash the stock rom. Are you flashing using a SD card, or USB? SD card would be 10x easier, as I've had problems connetion via USB while in bootloader.
Tyler
I was using USB for the relock.
I used SD card when I unlocked it the 1st time but I forgot how I did it.
I am pressed for time because I am going on vacation. How do I fix it?
Thanx.
Your device is in bootloader mode waiting for you to flash the stock ROM. Put the stock ROM on a SD card and flash it..press power/camera buttons while depressing the soft reset hole with stylus. Don't forget u have to rename the ROM to TITAIMG.nbh
Ok thanks, I will try it when I get home....
I thought I had already installed the Rom by USB but I guess it didn't take.
My computer act as if it was uploading to my phone, I will put the rom on SD and try it that way. I will let you know how it turns out.
Thanks!
what happens if I use a 4GB card?
slosho said:
what happens if I use a 4GB card?
Click to expand...
Click to collapse
bootloader will not recognize 4g. Has to be 2g or less formatted fat32
mattsm said:
bootloader will not recognize 4g. Has to be 2g or less formatted fat32
Click to expand...
Click to collapse
I was using the original 512 that came with the mogule.
Thanks for your input.
blueglide said:
Your device is in bootloader mode waiting for you to flash the stock ROM. Put the stock ROM on a SD card and flash it..press power/camera buttons while depressing the soft reset hole with stylus. Don't forget u have to rename the ROM to TITAIMG.nbh
Click to expand...
Click to collapse
Thanks it worked !!!!!!!!
What a great forum.....you probably could have searched and found all the info..but no one gave you a hard time and just HELPED....
Glad your phone works and have fun on vacation...
My Hero has been under water for a sec, and is stuck in "HERO" .
Then I guess somthing still is working inside.
Is it a worth try to reinstall a ROM?
I see that this issue already has been written about, but I will really appreciate an explanation for a dummie
Will the unit be able to start a reinstall if a new software is placed onto the memory card? Is the fact that the phone shows "HERO" a sign that the boot process reaches the point to start a reinstall?
If so, can anyone please link me the appropriate ROM and explain what to do?
Is the ROM an .exe file?
I have tried the trick to reset the unit by pressing HOME, BACK and hit the POWER buton. The unit got into the meny and I selected RESET or something but it did solve the problem . I do not know any other easy trick.
Thanks!
Is ur phone rooted? if so try holding the HOME key then power on the device and that will get u into recovery screen, there, try flashing a new ROM u can find plenty here:
http://forum.xda-developers.com/forumdisplay.php?f=512
any post that starts with [ROM], cz that really depends on ur taste and choice I mean this is wt android is about isn't it
mulkave said:
Is ur phone rooted? if so try holding the HOME key then power on the device and that will get u into recovery screen, there, try flashing a new ROM u can find plenty here:
http://forum.xda-developers.com/forumdisplay.php?f=512
any post that starts with [ROM], cz that really depends on ur taste and choice I mean this is wt android is about isn't it
Click to expand...
Click to collapse
Think I got the Phone reinstalled via SD Card now with original ROOT.ZIP.
It is not rooted. However, it does not boot an further that the "HERO" screen....
Are there anything else to try?
Get an RUU from HTC's website, thats rescued a few soft bricks that i got. Although you may have damaged some internal components.
Sent from my Hero using XDA Premium App
JieeHD said:
Get an RUU from HTC's website, thats rescued a few soft bricks that i got. Although you may have damaged some internal components.
Sent from my Hero using XDA Premium App
Click to expand...
Click to collapse
This is what I did:
Downloaded the ROM-:2.73.405.5 from HTC.
Installed in windows 7 and took the ROOT.ZIP file from the installation TEMP folder, renamed it to HEROIMG.ZIP and put it to the clean FAT32 SD card and booted the HERO.
The HERO installed the file without any fault messages,
but still the unit does not boot any further than the "HERO" white letters...
I guess this is it...I need a new print card for the phone? I have checked the contacts inside the HERO, they seem ok.
When putting the unit to charge the orange light lits, but disappear when pressing power button - however, the battery DOES charge.
Why did you extract the ROM.zip, just let the RUU run its course. It'll fix any software issues that may exist.
Sent from my Hero using XDA Premium App
This - and two weeks of vacation worked - thanks!