hello, i seem to have some problem on flashing my xda IIi into neither WM 5 or WM 2003se... it stays at the bootloader and when i try to use the himaupgradeut_noID it stays on erasing rom image but after awhile it goes error 113... so can't flash it back now my phone is totally without any OS
himaupgradeut_noID
is the tool to flash himalaya devices with
you have an alpine
you cant use himalaya software to flash your alpine with
tried the _noID but the problem seems to be the same
now it seems to have red light on the indicator section... no display is it dead? if it is then i'm dead pls help. thank you
dont! use himaupgradeut_noID
it's for himalaya
if you can save your device you need to use ALPINE roms/ flash tools
that saved my device... thanks
Related
Hello,
I've a working OS 6.0 and beeing using it for last few months. I've done reformat with the same rom 2-3 times in between. Never had a problem until last night. I resetted the device after upgrading the rom and the screen was stuck on boot screen for long time. So, I did a bootloader mode (Camera key + softreset ) , which didn't come up. Nothing comes up now , and it drains the battery. Thats all I see.
Please help me with this issue.
thanks.
does you phone still turn on?are you sure you didn't flash a g3 bootloader on a g4 chip?that could brick the phone
Yes, it does turn on & stucks back in bootscreen. I can recharge the battery and all, but can go no farther. I've used the same rom before and worked fine everytime. So, I find it quite strange not to work now.
try flashing another compatible rom..or the original rom and them flash your wanted rom again..be carefull NOT TO FLASH A G3 ON A G4
Woohoo!! Got it working by changing USB port and retrying the bootloader mode. Worked fine. I think it's actually the Key combination bootloader mode that takes a little getting used to
Thanks all for your reply.
your welcome....have a nice one and enjoy yourr functional wizard
Thanks !
Wizard
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
NO need to worry. Just go to your bootloader mode. For MDA Vario its Camera + softreset key.
Than reinstall with a working rom.
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Which version do you have? G3 or G4? Is it SIM\CID unlocked?
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Download and flash official Rom in bootloaders (3 colors) screen,it'll recover back to normal.
Any news about ur Mda?
Sir,
can any one tell me how to restore my htc p3400i back to normal. i have a device HTC P3400i GENE100. i use a guide on this site of KRAZY_ABOUT i successfully install orefkov and after install that i upgrade my original ROM WM6.0 to cooked wm6.1 (by lemlon). after install the cook rom i get my device too slow so then i reinstall RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship.exe i was really dont know it was for old gene. after install it my HTC is restart and not booting up and not going into bootloader mode and i tried evey combination of key (camera+power button or vol+cam+power or press both "-" button and insert batt.)to go in bootloader mode.... PLZ Help me i m suffer with this problem.
http://forum.xda-developers.com/showthread.php?t=506467
now only gene jtag method can help u !
search for gene_jtag_restore_revised and u will find
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
amolji said:
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
Click to expand...
Click to collapse
install a new ROM thats it
PRoblem solved
Even my device is bricked because of this ROM
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
amit_nikharge27 said:
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
Click to expand...
Click to collapse
hi amit,
i am also finding the solution for this. but now i m sure i have only last way to restore this with JTAG method, so i m collecting information about this JTAG method, if i able to restore my GENE with this i will definitely create a full guide for new bee who are struggling with this problem...
so keep u r eye on thread.....
bye....///
Hey hi, guru,
did u managed to restore your device using JTAG method.
could you please share me the steps if you have resolved it.
any one need information on j-tag.....?coz i recovered my lost gene b4 6 months ago using this j-tag.....so simple.....
Why do people go around flashing ROM's blindly?? :angry:
It is clearly mentioned everywhere i read not to flash original ROM's without removing the radio parts..
Please don't flash a rom who contains IPL, SPL or GSM. It will brick your device. Sometimes in a irreparable way.
People should pay more attention to everything mentioned here..
Hi rony_z367,
b4 8 months i lost my mobile due to upgrading spl,but it was in warranty...
now my gene is working fine with cooked roms but still i want to know about J-Tag.
sry abt my english
It is the process of recovering the memory addresses of ur ARM where u can directly connected to the respected hardware & re-program that h/w with ur given addresses.....but its so risky.....finaly ur addresse comes to 00....
Actually i didn't understand it completely..
but thx for info..
the pleasure is all mine.....thnx......
Hi guys,
I've got this problem where i flash HSPL onto my HD2 and installed the energy rom after that. The problem is that when I start the Camera, the whole phone went blank and now after restarting (countless), the screen shows a white screen with the HTC logo on it and it just won't boot/start. How do I rectify this?
honglim said:
Hi guys,
I've got this problem where i flash HSPL onto my HD2 and installed the energy rom after that. The problem is that when I start the Camera, the whole phone went blank and now after restarting (countless), the screen shows a white screen with the HTC logo on it and it just won't boot/start. How do I rectify this?
Click to expand...
Click to collapse
Make an hard reset and you can boot but look all your version of rom spl and radio i've look same problem with an older version rom.
Sorry for english
can u remember your radio?
pls check if it is compatible at energy's thread
if not compatible..u may want to enter bootloader mode and reflash the radio
cheers
Hi guys I have an Evesham 7211 sat nav unit which uses win ce 4.2 but the unit freezes after the boot up screen is displayed.
I have a dump.bin of this device but cannot connect to the pc with it.
Does anyone know how I can flash this rom file back to the device to get it to boot again ?
help
bump common guys help me out please
Most likely there is nothing you can do, if device does not have a hard-reset option - you're out of luck.
Hello everyone,
i have some problem with my htc hd2.
Just want to say sorry for my english in advance
I tried to star the phone in usb mode and no having problem. Flash it with cotulla HSPL 2.08 and works fine but when i try to flash the rom i having problem just because the process it's blocked on 1 or 2%.
I can tell you that the htc logo it appear strange with some black line. otherwise when i power on the phone in usb mode (it's impossible to start the phone normally) i see the standard 3 colors RGB and some information included new one that say: "upgrade rom code error, please try again".
what i should to try to resolve this problem???
silvioslim said:
Hello everyone,
i have some problem with my htc hd2.
Just want to say sorry for my english in advance
I tried to star the phone in usb mode and no having problem. Flash it with cotulla HSPL 2.08 and works fine but when i try to flash the rom i having problem just because the process it's blocked on 1 or 2%.
I can tell you that the htc logo it appear strange with some black line. otherwise when i power on the phone in usb mode (it's impossible to start the phone normally) i see the standard 3 colors RGB and some information included new one that say: "upgrade rom code error, please try again".
what i should to try to resolve this problem???
Click to expand...
Click to collapse
what is it your trying to flash?
can you get it in to bootloader mode, plug it in to your computer so where it says "serial" in changes to "USB"
once in that you should try putting the HSPL back to a normal SPL, then install HSPL again. if your attempting an Android ROM, try installing a customer WM instead...