Hello,
I've a working OS 6.0 and beeing using it for last few months. I've done reformat with the same rom 2-3 times in between. Never had a problem until last night. I resetted the device after upgrading the rom and the screen was stuck on boot screen for long time. So, I did a bootloader mode (Camera key + softreset ) , which didn't come up. Nothing comes up now , and it drains the battery. Thats all I see.
Please help me with this issue.
thanks.
does you phone still turn on?are you sure you didn't flash a g3 bootloader on a g4 chip?that could brick the phone
Yes, it does turn on & stucks back in bootscreen. I can recharge the battery and all, but can go no farther. I've used the same rom before and worked fine everytime. So, I find it quite strange not to work now.
try flashing another compatible rom..or the original rom and them flash your wanted rom again..be carefull NOT TO FLASH A G3 ON A G4
Woohoo!! Got it working by changing USB port and retrying the bootloader mode. Worked fine. I think it's actually the Key combination bootloader mode that takes a little getting used to
Thanks all for your reply.
your welcome....have a nice one and enjoy yourr functional wizard
Thanks !
Wizard
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
NO need to worry. Just go to your bootloader mode. For MDA Vario its Camera + softreset key.
Than reinstall with a working rom.
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Which version do you have? G3 or G4? Is it SIM\CID unlocked?
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Download and flash official Rom in bootloaders (3 colors) screen,it'll recover back to normal.
Any news about ur Mda?
Related
Hi All ,
I have a problem with my xda ages ago i tried to flash it to WM2003 and it failed , and now it wont do a tihng except sit in its cradel and charge .. i tried to load a new rom onto a SD Card and it failed because the bootlaoder wont work even when i press the soft reset button can anyone helped me ? . plzz im in dire need of this phone working
love emma xx
No one ?
Already Emailed you back.
Stefan
i have pretty much same problem
So what do you guys get, when you try to flash via SD-Card?
Stefan
Where can I get a new ROM form, please? Got the same original problem, but not got this far yet.
'from' that is!
http://www.romkitchen.de/
Hi
i got a new t-mobile htc hd2 a few days back later
i don't know what happens to it first it get started and stuck on the main screen of startup "stick together"
and i go to market and now the phone do not turns on when i tried to turn it on
so guys please help me what i have to do now
any solution any custom rom--flashing please help me
thanks to all of you
it's not "bricked" mate, bricked means that not work nothing, no bootloader no nothing ( as mine )
phone stay in black screen.
maybe you solve re-entering in bootloader mode ( tri color screen )
and re-flashing phone
so what i have to do now brother
please help me i want to use it
i am waiting for ur reply
thanks
mianhadi143 said:
so what i have to do now brother
please help me i want to use it
i am waiting for ur reply
thanks
Click to expand...
Click to collapse
Download a t-mobile rom stock rom first - be very carefully dont use other rom
Just go into bootloader - torn one phone while pressing volume down until you se tricolor screen... connect with pc and wait until drivers are installed and then flash the rom
ubejd said:
Download a t-mobile rom stock rom first - be very carefully dont use other rom
Just go into bootloader - torn one phone while pressing volume down until you se tricolor screen... connect with pc and wait until drivers are installed and then flash the rom
Click to expand...
Click to collapse
You need to make sure you download a rom based on your version of HD2. Do you have the European version, or Tmo versoion?
Hello HD2 users!
My problem is: Im got new HD2, tryed to update it to android, im was do all steps, but now it wont boot at all!
Im can only boot it into HLSP colored screen, nothing then... Im tried to install new software, ORIGINAL from t-mobile, but it's always stuck at 0%...Tried many difrent things like: New Radio, Reinstall HSPL, Install Magldr, Soft reset,Hard Reset! Im always stuck at 0%!! Evet tast29 wont start at all!
When it stuck at 0% im turn my phone, but it wont boot again until im get my batery out for 5-10min...
Really, mi in love with this phone, im can't get phone in service, because im dont have warranty...
Everybody,help me... Real fix ( one man ho helps me to get my phone works) will get 15$ at paypal!
Thanks All!
Im will be active!
You may should put your Phone into the Bootloader, then reflash the HSPL, put it again in Bootloadermode and then try to flash an Custom Rom for your Phone.
Edit: You wrote T-Mobile Original Rom so do you may have the american Version of the HD2 and flashed the wrong thing ?
I hope I could help you.
Greetings by Myself5
Sent from my Galaxy S2.
....
Yes im have t-mobile HD2...im flashed HLSP3, now is completly dead.... im think my bateri is out, how to charge it?
Do you know someone who has an HD2 and would allow you to charge it ? If not put it on the charger and set it in bootloader. Normaly it should load then.
Sent from my GT-I9100 using xda premium
Galaxy3HELL said:
Hello HD2 users!
My problem is: Im got new HD2, tryed to update it to android, im was do all steps, but now it wont boot at all!
Im can only boot it into HLSP colored screen, nothing then... Im tried to install new software, ORIGINAL from t-mobile, but it's always stuck at 0%...Tried many difrent things like: New Radio, Reinstall HSPL, Install Magldr, Soft reset,Hard Reset! Im always stuck at 0%!! Evet tast29 wont start at all!
When it stuck at 0% im turn my phone, but it wont boot again until im get my batery out for 5-10min...
Really, mi in love with this phone, im can't get phone in service, because im dont have warranty...
Everybody,help me... Real fix ( one man ho helps me to get my phone works) will get 15$ at paypal!
Thanks All!
Im will be active!
Click to expand...
Click to collapse
I am having a similar problem. Whenever I try to update the ROM, the utility gets stuck at 0%. I've somehow managed to get to replace the 2.08 SPL to 3.03 and flash the stock ROM but even if I'm lucky enough for it to work, it still won't boot past the HTC logo.
Hi.
In first, sorry for my english.
I have trouble, Previous i have stock v20c, I want to install CM 10.1.1, and first i flashed kernel boot.img from zip package with CM. Previously i had se xperia neo v, so i did it in habbit. Now i have bootloop with LG logo and i have no idea to solve it. Anyone can help me? I dont have CWM recovery in this kernel. If I send phone to LG service, they repair my phone?
kuba295 said:
Hi.
In first, sorry for my english.
I have trouble, Previous i have stock v20c, I want to install CM 10.1.1, and first i flashed kernel boot.img from zip package with CM. Previously i had se xperia neo v, so i did it in habbit. Now i have bootloop with LG logo and i have no idea to solve it. Anyone can help me? I dont have CWM recovery in this kernel. If I send phone to LG service, they repair my phone?
Click to expand...
Click to collapse
You don't need to send it to LG service. You just softbricked your phone. Try this: http://forum.xda-developers.com/showpost.php?p=40483954&postcount=2
anirion said:
You don't need to send it to LG service. You just softbricked your phone. Try this: http://forum.xda-developers.com/showpost.php?p=40483954&postcount=2
Click to expand...
Click to collapse
hard reset not work, force switch off not work. i plug in phone without battery and hold for 3 seconds volup+power and my phone connect and disconect in loop i dont see S/W Upgrade. Anyone can help me? Maybe, the problem is not stock kernel? But anyway i dont run s/w upradge by this method
@edit: I solve it, i insert battery too fast. But anyway i have CM10.1.1, my phone works and I'm happy. BIG THANKS TO YOU @anirion!!!!
i am also facing the same problem
kuba295 said:
hard reset not work, force switch off not work. i plug in phone without battery and hold for 3 seconds volup+power and my phone connect and disconect in loop i dont see S/W Upgrade. Anyone can help me? Maybe, the problem is not stock kernel? But anyway i dont run s/w upradge by this method
@edit: I solve it, i insert battery too fast. But anyway i have CM10.1.1, my phone works and I'm happy. BIG THANKS TO YOU @anirion!!!!
Click to expand...
Click to collapse
I am also facing the same problem nothing is working and when i plug my phone to computer without battery , windows detects and it goes away in a loop. how can i get passed this...how did you do this?? please help !!! my phone is unrooted before it got softbricket. I am a noob to all these topics.
nikscrysis29 said:
I am also facing the same problem nothing is working and when i plug my phone to computer without battery , windows detects and it goes away in a loop. how can i get passed this...how did you do this?? please help !!! my phone is unrooted before it got softbricket. I am a noob to all these topics.
Click to expand...
Click to collapse
There're some information about fastboot in http://forum.xda-developers.com/showthread.php?t=2221102, in 0) Preparations:-
Hello guys, i need little help with my phone, so here is what happened: Two days ago i tried to turn on my phone, it started booting but the cycle repeated again and again so I got in recovery and wiped data/catche, but that didn`t helped. I thought that if i change the rom maybe I can fix the problem so I downloaded my rom from needrom (there were 2 roms for my device) and started flashing with Flash tool. I downloaded the first rom to my phone and tried to turn the phone on but nothing happened.. I downloaded the second rom and it worked, the phone booted but the only think that I can see is blank white screen, the touch is working and the buttons, when i click somewhere i feel the device vibrating but thats it. One time i managed to make the device appear in my computer as a normal android phone, dont know how this happened. So can someone help me please, if you have a phone like mine can you backup your rom and send it to me or help me find a working one, or some idea how to fix the blank screen. Thanks in advance
someone :/
t0shko0 said:
someone :/
Click to expand...
Click to collapse
I`m really desperate :X . I thought about porting other android from similiar MKT device but how can I do that when i don`t have a working one.
t0shko0 said:
Hello guys, i need little help with my phone, so here is what happened: Two days ago i tried to turn on my phone, it started booting but the cycle repeated again and again so I got in recovery and wiped data/catche, but that didn`t helped. I thought that if i change the rom maybe I can fix the problem so I downloaded my rom from needrom (there were 2 roms for my device) and started flashing with Flash tool. I downloaded the first rom to my phone and tried to turn the phone on but nothing happened.. I downloaded the second rom and it worked, the phone booted but the only think that I can see is blank white screen, the touch is working and the buttons, when i click somewhere i feel the device vibrating but thats it. One time i managed to make the device appear in my computer as a normal android phone, dont know how this happened. So can someone help me please, if you have a phone like mine can you backup your rom and send it to me or help me find a working one, or some idea how to fix the blank screen. Thanks in advance
Click to expand...
Click to collapse
Same problem with me.
I downloaded the rom from NEEDROM.COM.
chery22 said:
Same problem with me.
I downloaded the rom from NEEDROM.COM.
Click to expand...
Click to collapse
Have the same problem. I also downloaded the rom from Needrom.com and after installing the software I have a white screen and unable to use the device. Anybody solved already this matter? Help would be very much appreciated. Thanks.
PitNaw said:
Have the same problem. I also downloaded the rom from Needrom.com and after installing the software I have a white screen and unable to use the device. Anybody solved already this matter? Help would be very much appreciated. Thanks.
Click to expand...
Click to collapse
me to
has anybody a original ROM for the N800+?