Hi
i got a new t-mobile htc hd2 a few days back later
i don't know what happens to it first it get started and stuck on the main screen of startup "stick together"
and i go to market and now the phone do not turns on when i tried to turn it on
so guys please help me what i have to do now
any solution any custom rom--flashing please help me
thanks to all of you
it's not "bricked" mate, bricked means that not work nothing, no bootloader no nothing ( as mine )
phone stay in black screen.
maybe you solve re-entering in bootloader mode ( tri color screen )
and re-flashing phone
so what i have to do now brother
please help me i want to use it
i am waiting for ur reply
thanks
mianhadi143 said:
so what i have to do now brother
please help me i want to use it
i am waiting for ur reply
thanks
Click to expand...
Click to collapse
Download a t-mobile rom stock rom first - be very carefully dont use other rom
Just go into bootloader - torn one phone while pressing volume down until you se tricolor screen... connect with pc and wait until drivers are installed and then flash the rom
ubejd said:
Download a t-mobile rom stock rom first - be very carefully dont use other rom
Just go into bootloader - torn one phone while pressing volume down until you se tricolor screen... connect with pc and wait until drivers are installed and then flash the rom
Click to expand...
Click to collapse
You need to make sure you download a rom based on your version of HD2. Do you have the European version, or Tmo versoion?
Related
Hello,
I've a working OS 6.0 and beeing using it for last few months. I've done reformat with the same rom 2-3 times in between. Never had a problem until last night. I resetted the device after upgrading the rom and the screen was stuck on boot screen for long time. So, I did a bootloader mode (Camera key + softreset ) , which didn't come up. Nothing comes up now , and it drains the battery. Thats all I see.
Please help me with this issue.
thanks.
does you phone still turn on?are you sure you didn't flash a g3 bootloader on a g4 chip?that could brick the phone
Yes, it does turn on & stucks back in bootscreen. I can recharge the battery and all, but can go no farther. I've used the same rom before and worked fine everytime. So, I find it quite strange not to work now.
try flashing another compatible rom..or the original rom and them flash your wanted rom again..be carefull NOT TO FLASH A G3 ON A G4
Woohoo!! Got it working by changing USB port and retrying the bootloader mode. Worked fine. I think it's actually the Key combination bootloader mode that takes a little getting used to
Thanks all for your reply.
your welcome....have a nice one and enjoy yourr functional wizard
Thanks !
Wizard
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
NO need to worry. Just go to your bootloader mode. For MDA Vario its Camera + softreset key.
Than reinstall with a working rom.
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Which version do you have? G3 or G4? Is it SIM\CID unlocked?
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Download and flash official Rom in bootloaders (3 colors) screen,it'll recover back to normal.
Any news about ur Mda?
♠♠♠PLeaSE HeLLLP MY p3400 bricked♦ NeED HelP URgently♠♠♠♠
dear bros. am using HTC gene. yesterday am thought to upgrade my Phone OS and i do the olipro method . first am copy gene_hspl.exe into my phone memory and click to that file . then the PHONE was switch off .after olipro methord my phone ded (only red and green button blinks when i press the power butten).and am go to the orefkov method . but the last...... " ROM update utility " runs in my pc an error message display. "ERROR 200 " ."pls get newer update utility". pls help me . now my phone was
switch off. pls replay urgently.
any trick for swith on my phone., like to remove gene_hspl.exe from the phone memmory(just my idea).
or how to start my phone ....
adv thx.,,,,,,,,,,...................
Dear Pls try with the ROM Update Utility attached below. Even I used to get this error sometimes back. But after using this utility I have never faced any issues....
same problem
@krrahuldev
Did u manage to fix ur phone?
i have the same problem
My handset not going in boot loader mode
only ( green + red ) button light blink
try upgarde the rom , allways connection error
any solution will be helpfull
Thanks in advance
try killing the wcecomm.exe process from task manager again!!
hope it works
tryed , but the computer does not detect the handset,
Even check in DEVICE MANAGER ,does not show anything
Dear,
Can u please tell us which Operating System u are using. U might need to change the USB drives given by Krazy.
i am useing windows XP
Any link will be usefull
please check ur private msgs....
this phone came to change the lang
Original rom was : RUU_Gene_HTC_RUS_1.7.411.0_4.1.13.31_02.71.90_Ship _Abdie.exe
From
Russian to english
I use Olipro For Old Gene
After that i upgarde the rom
with this file
RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe
After the upgrade it showed sucessfull
But the handset did not power on
Only lights comming on the ( Red- green button )
& now even the computer does not detect the phone
press n hold camera button n reset if u hv done previous steps properly it wil go to bootloader mode!
tryed many times but does not go into bootloader
sams said:
tryed many times but does not go into bootloader
Click to expand...
Click to collapse
Hold Camera Button and press "Soft Reset " which is at the Bottom of phone..
try This
same problem but now cant get in bootlaoder anymore,pls help
same problem but now cant get in bootlaoder anymore,.when on the green n red light blink 1 time only ,pls help
excelpass said:
same problem but now cant get in bootlaoder anymore,.when on the green n red light blink 1 time only ,pls help
Click to expand...
Click to collapse
remove battery and then press on button then put battery back and then try to above method .
Any Trick for restoring boot file??
cuteitsme said:
Dear Pls try with the ROM Update Utility attached below. Even I used to get this error sometimes back. But after using this utility I have never faced any issues....
Click to expand...
Click to collapse
Hello Brother .,
not working for me the update tool to attached by u... the same prob shows.!!!!!!!!!!
any trick for restoring my p3400 rom? for working condition???
pls reply immediately...........
are u able to get into the boot loader mode??
unless n until u r able to enter the boot loader mode the ROM update utility will not detect your phone.....
Problem
i have the same problem
My handset not starting on
only ( green + red ) button light blink
try everythin yaar
any solution will be helpfull
Thanks in advance
HTC P3400 good bye
i got the same proplem my mobile was stucked in bootloader screen i used mtty & successfully completed the rom update after that my phone give nothing even no bootloader screen so i have to say good bye
Hi guys,
I've got this problem where i flash HSPL onto my HD2 and installed the energy rom after that. The problem is that when I start the Camera, the whole phone went blank and now after restarting (countless), the screen shows a white screen with the HTC logo on it and it just won't boot/start. How do I rectify this?
honglim said:
Hi guys,
I've got this problem where i flash HSPL onto my HD2 and installed the energy rom after that. The problem is that when I start the Camera, the whole phone went blank and now after restarting (countless), the screen shows a white screen with the HTC logo on it and it just won't boot/start. How do I rectify this?
Click to expand...
Click to collapse
Make an hard reset and you can boot but look all your version of rom spl and radio i've look same problem with an older version rom.
Sorry for english
can u remember your radio?
pls check if it is compatible at energy's thread
if not compatible..u may want to enter bootloader mode and reflash the radio
cheers
hi
please hepl me my x10 goes in blue screen and always in flash mode.that was in restarting again n again n i by mistake downgrade to R1FA016.FSP_X10a_CLARO_GT_NAM1_1234_4844_S1_SW_LIVE_AC12_0001_S1_PARTITION_WITH_SPARE.R14A.SIN_FILE_SET firmware....please hepl me guyes!!~
by regards
you should paste this thread into Q&A
cheers.
thanx bro but its amazing i try this firmware again n my handset is alive !!1
Hmmmm........
good news!
perhaps you can deal with problems yourself rather than easily asking for help.......
dude. this isn't a damn symbian phone which kills your phone by downgrading .
edit: yes, I have tonnes of symbian phones
YOU CAN NOT BRICK ANY PRE-2011 SE PHONE WITH ANDROID ON IT BY FLASHING!!
The worst one can do is switching phone off while flashing, that causes the partitions to be filled with trash data.
Learn this and quit spamming the DEVELOPEMENT forum!
dual post... delete please!!
mobilecraker said:
hi
please hepl me my x10 goes in blue screen and always in flash mode.that was in restarting again n again n i by mistake downgrade to R1FA016.FSP_X10a_CLARO_GT_NAM1_1234_4844_S1_SW_LIVE_AC12_0001_S1_PARTITION_WITH_SPARE.R14A.SIN_FILE_SET firmware....please hepl me guyes!!~
by regards
Click to expand...
Click to collapse
mobilecraker said:
thanx bro but its amazing i try this firmware again n my handset is alive !!1
Click to expand...
Click to collapse
It is my understanding that radio will boot first, followed by other systems. So it is IMPORTANT that your radio image/version will work with your SPL(bootloader) image/version. This is the one and only reason for phones being bricked. You can not brick your phone by flashing a ROM or Boot image or recovery image. Once you flash the wrong radio for the SPL(bootloader), the only known method of recovery is to send the phone back into SE for repair. Now with boot loader unlocked this is quite possible!!
How do I know the phone is bricked? A bricked phone can not boot into boot loader, recovery, or into normal operation modes. You can not connect to a bricked phone via adb or fastboot. You can only see one screen on the phone and it will be the first splash screen.
Hi.
In first, sorry for my english.
I have trouble, Previous i have stock v20c, I want to install CM 10.1.1, and first i flashed kernel boot.img from zip package with CM. Previously i had se xperia neo v, so i did it in habbit. Now i have bootloop with LG logo and i have no idea to solve it. Anyone can help me? I dont have CWM recovery in this kernel. If I send phone to LG service, they repair my phone?
kuba295 said:
Hi.
In first, sorry for my english.
I have trouble, Previous i have stock v20c, I want to install CM 10.1.1, and first i flashed kernel boot.img from zip package with CM. Previously i had se xperia neo v, so i did it in habbit. Now i have bootloop with LG logo and i have no idea to solve it. Anyone can help me? I dont have CWM recovery in this kernel. If I send phone to LG service, they repair my phone?
Click to expand...
Click to collapse
You don't need to send it to LG service. You just softbricked your phone. Try this: http://forum.xda-developers.com/showpost.php?p=40483954&postcount=2
anirion said:
You don't need to send it to LG service. You just softbricked your phone. Try this: http://forum.xda-developers.com/showpost.php?p=40483954&postcount=2
Click to expand...
Click to collapse
hard reset not work, force switch off not work. i plug in phone without battery and hold for 3 seconds volup+power and my phone connect and disconect in loop i dont see S/W Upgrade. Anyone can help me? Maybe, the problem is not stock kernel? But anyway i dont run s/w upradge by this method
@edit: I solve it, i insert battery too fast. But anyway i have CM10.1.1, my phone works and I'm happy. BIG THANKS TO YOU @anirion!!!!
i am also facing the same problem
kuba295 said:
hard reset not work, force switch off not work. i plug in phone without battery and hold for 3 seconds volup+power and my phone connect and disconect in loop i dont see S/W Upgrade. Anyone can help me? Maybe, the problem is not stock kernel? But anyway i dont run s/w upradge by this method
@edit: I solve it, i insert battery too fast. But anyway i have CM10.1.1, my phone works and I'm happy. BIG THANKS TO YOU @anirion!!!!
Click to expand...
Click to collapse
I am also facing the same problem nothing is working and when i plug my phone to computer without battery , windows detects and it goes away in a loop. how can i get passed this...how did you do this?? please help !!! my phone is unrooted before it got softbricket. I am a noob to all these topics.
nikscrysis29 said:
I am also facing the same problem nothing is working and when i plug my phone to computer without battery , windows detects and it goes away in a loop. how can i get passed this...how did you do this?? please help !!! my phone is unrooted before it got softbricket. I am a noob to all these topics.
Click to expand...
Click to collapse
There're some information about fastboot in http://forum.xda-developers.com/showthread.php?t=2221102, in 0) Preparations:-